Reg: s/w Cloning

Folks,
I need to clone the DB software alone from production to development.
production :
EBS:R12
DB:11g RAC
I need to clone only software ?
Thanks,
Edited by: JuniorDBA on Nov 2, 2011 10:57 AM

Hi JuniorDBA
According to their requirement. i am very sure this is a whole ebs application cloining not just the database and it involves the appTier and dbTier.
Here is what to do ...follow this note "Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1]" and if it is a RAC to single instance then see
Section 6: RAC to Single Instance Cloning
...and they want you to change the database name when you clone from production to serv2 and also change the apps password.
if you have not done any ebs cloning before i suggest you to read and understand this note before proceed.
good luck,

Similar Messages

Reg: Issue with cloning

Folks,
DB=10.2.0.4 two node RAC
apps=11.5.10.2
OS=rhel 4....
cloning to
OS=rhel5 and RAC to non RAC cloning ..
after cloning facing below issue ... not autconfig not successfull..
+++++++++++++++
SQL> conn apps
Enter password:
ERROR:
ORA-00600: internal error code, arguments: [skkxerrp], [skkxdllload],
[SlfFopen],
[/s04/s04/prd1/db/10.2.0/plsql/nativelib/d37/DBMS_APPLICATION_INFO__SYS__B__3323
.so], [No such file or directory], [], [], []
ORA-06508: PL/SQL: could not find program unit being called:
"SYS.DBMS_APPLICATION_INFO"
ORA-06512: at line 1
Error accessing package DBMS_APPLICATION_INFO
Connected.
++++++++++++++++
for all the user and same error appears in autconfig log also ..p
pls advise

after cloning facing below issue ... not autconfig not successfull..How did you clone the application/database?
SQL> conn apps
Enter password:
ERROR:
ORA-00600: internal error code, arguments: [skkxerrp], [skkxdllload],
[SlfFopen],
[/s04/s04/prd1/db/10.2.0/plsql/nativelib/d37/DBMS_APPLICATION_INFO__SYS__B__3323
.so], [No such file or directory], [], [], []
ORA-06508: PL/SQL: could not find program unit being called:
"SYS.DBMS_APPLICATION_INFO"
ORA-06512: at line 1
Error accessing package DBMS_APPLICATION_INFO
Connected.
++++++++++++++++
for all the user and same error appears in autconfig log also ..pWhat is the status of this package? Is it valid?
What are the values of "plsql_code_type" and "plsql_native_library_dir" initialization parameters? -- Database Initialization Parameters for Oracle Applications Release 11i [ID 216205.1]
ORA-600 [skkxerrp] [ID 300640.1]
ORA-600/ORA-7445/ORA-700 Error Look-up Tool [ID 153788.1]
Master Note for Diagnosing ORA-600 [ID 1092832.1]
Thanks,
Hussein

Reg:oracle apps cloning

Hi
I tried to run the preclone in source system in both apps&db tier. Its successfully ran. After that i tried to copy the source system files to target system using scp command: scp -p -r d01.tar.gz root@ipadress: /path. I specified which files are copying to the target system, but that d01.tar.gz files not copying instead os files are copying to the target system, So please give me the solution.
Note:above cloning steps are single-node.
Regards
D

Hi,
Do you have the file you are trying to copy under the current user directory?
After that i tried to copy the source system files to target system using scp command: scp -p -r d01.tar.gz root@ipadress: /pathThe correct syntax to run scp command is as follows:
scp [options] [[user@]host1:]filename1 ... [[user@]host2:]filename2Man scp
http://unixhelp.ed.ac.uk/CGI/man-cgi?scp+1
In Unix, how do I use the scp command to securely transfer files between two computers?
http://kb.iu.edu/data/agye.html
Regards,
Hussein

Re: Reg:oracle apps cloning

Hi
I tried to move the tar files from one server to another server using rcp, But i don't no how to use rcp please give me the solution.
Regards
D

Hi,
This should help.
http://tinyurl.com/m4dxyn
Regards,
Hussein

Reg:shadow cloning

Hello friends,
I know about cloning but not about shadow cloning .... can any one please say about this and when we use this type of cloning....

Its not shadow cloning, its shallow cloning. Look at the following post : http://forum.java.sun.com/thread.jspa?threadID=5144515&messageID=9539947

REG: Cloning

hi,
i need to clone an instance now.... pls provide me the step step by process.,... from starting to end.... what patches all we need to apply and which path we want to apply that patch...??..,
thanks & regards
vasanth

Hi;
Please check below note whihc is publised for R11 and R12.
Note: 799735.1 - Rapid Clone Documentation Resources, Release 11i and 12
Subject: Cloning Oracle Applications Release 12 with Rapid Clone Doc ID: 406982.1
Cloning Oracle Applications Release 11i with Rapid Clone http://ID 230672.1
FAQ: Cloning Oracle Applications Release 11i http://ID 216664.1
Descriptive Checklist for performing Rapid Clone with 11i/R12 http://ID 811715.1
Just check note which is related as your EBS, check prerequest part. You can see what u need there (patch etc.)
Hope it helps
Regard
Helios

Cloning 11.5.10

Hello All,
I am cloning apps 11.5.10 from Solaris 9 to Solaris 10 operating system.
is there any special note which i need to follow for change of Solaris version?
Reg
Chirag Patel

target hostname i used is "ifmisnode" which is virtual host.
autoconfig already tried.
main is coming using hostname.domainname and also with IP address.
but i seen that when i click on "Logon to E-Business Suite Home" or "Logon to Oracle Applications Manager" URL in Main Page then
above mentioned error_log file appending with following error.
Thu Jul 31 11:31:42 2008] [debug] opm_ew.c(434): OPM: EW: Enters opm_ew_broadcast()
[Thu Jul 31 11:32:28 2008] [error] OPM:Can not find one alive process
[Thu Jul 31 11:32:28 2008] [error] OPM:Can not find one alive process
[Thu Jul 31 11:32:42 2008] [debug] opm_ew.c(434): OPM: EW: Enters opm_ew_broadcast()
[Thu Jul 31 11:33:00 2008] [error] OPM:Can not find one alive process
[Thu Jul 31 11:33:14 2008] [error] OPM:Can not find one alive process
[Thu Jul 31 11:33:23 2008] [error] OPM:Can not find one alive process
[Thu Jul 31 11:33:23 2008] [error] OPM:Can not find one alive process
[Thu Jul 31 11:33:42 2008] [debug] opm_ew.c(434): OPM: EW: Enters opm_ew_broadcast()
[Thu Jul 31 11:34:43 2008] [debug] opm_ew.c(434): OPM: EW: Enters opm_ew_broadcast()
[Thu Jul 31 11:35:43 2008] [debug] opm_ew.c(434): OPM: EW: Enters opm_ew_broadcast()
Reg
Chirag Patel

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

There's more to it than that.
Folders in Aperture do not hold Images. They hold Projects and Albums. You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
The relationship between Projects and Images is special: every Image must in a Project, and can be in only one Project.
Images can be in as many Albums you want. Putting an Image in an Album does not move it from the Project that holds it.
You can make as many Versions from a Master as you want.
What you want to do may appear simple to you, but it still much adhere to how Aperture works. I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful. If you haven't, take a look at the video tutorials on Apple's Aperture support site.
I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

Will the late 2013 Mac Pro boot from an external drive (4Tb, USB 3) with a cloned Win7 x64 partition on it?

Hello all,
I ordered a CTO Mac Pro for heavy rendering and animating work, and I am planning on using bootcamp to install a windows partition (for 3DsMax). As I am now using a HP Elitebook 8770W that has several valuable files and projects on it, I have bought a Seagate 4Tb external Desktop Drive that uses USB 3.0 to use as a backup drive. Now, as I saw that Bootcamp Assistant only supports installing a x64 version of Windows 8, my question is:
Will a late 2013 Mac Pro using bootcamp assistant boot from an external USB drive with a cloned partition running x64 win7? Or do I really have to buy Windows 8 and install that to my internal SSD, and then use the migration assistant to copy over my projects?
Thanks!

Posted? or found in new builds?
BCA should really just pull whatever the latest drivers are when run.
If it is with how it partitions and sets up nMP and its partition for Windows that is another matter and makes sense.
Some people want UEFI native booting in Windows, and my experieince with that on PCs has been that it boots faster and runs well, but has different partitions that it wants. For one thing, there is now a backup "system reserved" partition, just as Apple GUID has some volume information blocks and backup and areas that were once optional (and if format erase was not able to, it would not create one) are now mandatory.
Windows 8.1 is req'd, reason a backup should be a big must - is it might overwrite and use another OS's partition table entries. Especially when doing UEFI install.
There was something about which linux OS was safe and how they would each add entries in the table, but one would not place nice. That one had to be done first or not at all.

Can not request reports after cloning process

hello All,
I am new in oracle please guide me.
I have tried to make the process of cloning from dev machine to test machine, but after that the applications in dev machine was not able to request another report.
With Status: No Manager and phase: Inactive
we use:
RDBMS : 10.2.0.2.0
Oracle Application: 12.0.2(HRMS)
os: AIX 5.3 (64 bit)
I previously tried the ways of my search results on the forums and internet
1. Truncate FND_CONCURRENT_PROCESSES...
truncate table FND_CONCURRENT_PROCESSES;
2. Update FND_CONCURRENT_REQUESTS as follows:
update fnd_concurrent_requests
set status_code='X', phase_code='C'
where status_code='T'
3. Update FND_CONCURRENT_QUEUES.RUNNING_PROCESSES to zero
update fnd_concurrent_queues
set running_processes = 0;
4. restart conccurent managers,and has not succeeded.
and then I tried another way of information that I got
1. Stop the Internal Concurrent Manager.
2. Connect to the database via SQL*Plus as the APPS user.
3. Execute the following to alter the FNDSM trigger on FND_NODES:
CREATE OR REPLACE TRIGGER fndsm
AFTER INSERT OR UPDATE ON FND_NODES <---- ( "OR UPDATE" I do additional)
FOR EACH ROW
BEGIN
if ( :new.NODE_NAME <> 'AUTHENTICATION' ) then
if ( (:new.SUPPORT_CP='Y')
or (:new.SUPPORT_FORMS='Y')
or (:new.SUPPORT_WEB='Y') ) then
fnd_cp_fndsm.register_fndsm_fcq(:new.NODE_NAME);
end if;
if (:new.SUPPORT_CP = 'Y') then
fnd_cp_fndsm.register_fndim_fcq(:new.NODE_NAME);
end if;
end if;
END;
4. Cleanup the FND_NODES table by executing the following:
SQL> exec FND_CONC_CLONE.SETUP_CLEAN;
5. Run AutoConfig on each node.
6. Restart the Concurrent Managers. and still does not work.
if something is missing or wrong from the way I do or there are other ways more appropriate for me to do?
Thanks,
Batara

earlier thanks for your concern and support for you all ,
I've run as shown in MOS Doc 134007.1 , but it still does not work, and the clone,
actually the clone that we do is still in trial and we have not too much concentration to the test instance as the target system, but the problem is that dev instance as the source system should not in fact the configuration changes become problematic,as not requesting another report.
and this is my next piece of the internal display manager log:
========================================================================
Starting DEV_1111@DEV Internal Concurrent Manager -- shell process ID 725148
logfile=/u01/oracle/DEV/inst/apps/DEV_hrmdev/logs/appl/conc/log/DEV_1111.mgr
PRINTER=noprint
mailto=devmgr
restart=N
diag=N
sleep=30 (default)
pmon=4 (default)
quesiz=1 (default)
Reviver is ENABLED
Application Object Library: Concurrent Processing version 11.5
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Internal Concurrent Manager started : 11-NOV-2009 11:43:06
Process monitor session started : 11-NOV-2009 11:43:06
Starting PODAMGR Concurrent Manager : 11-NOV-2009 11:43:07
Could not initialize the Service Manager FNDSM_HRMDEV_DEV. Verify that HRMDEV has been registered for concurrent processing.
Routine AFPEIM encountered an error while starting concurrent manager PODAMGR with library /u01/oracle/DEV/apps/apps_st/appl/po/12.0.0/bin/POXCON.
Check that your system has enough resources to start a concurrent manager process. Contact y : 11-NOV-2009 11:43:07
Starting INVTMRPM Concurrent Manager : 11-NOV-2009 11:43:07
Could not initialize the Service Manager FNDSM_HRMDEV_DEV. Verify that HRMDEV has been registered for concurrent processing.
Routine AFPEIM encountered an error while starting concurrent manager INVTMRPM with library /u01/oracle/DEV/apps/apps_st/appl/inv/12.0.0/bin/INCTM.
Check that your system has enough resources to start a concurrent manager process. Contact : 11-NOV-2009 11:43:07
Starting RCVOLTM Concurrent Manager : 11-NOV-2009 11:43:07
Could not initialize the Service Manager FNDSM_HRMDEV_DEV. Verify that HRMDEV has been registered for concurrent processing.
Routine AFPEIM encountered an error while starting concurrent manager RCVOLTM with library /u01/oracle/DEV/apps/apps_st/appl/po/12.0.0/bin/RCVOLTM.
Check that your system has enough resources to start a concurrent manager process. Contact : 11-NOV-2009 11:43:08
Starting FFTM Concurrent Manager : 11-NOV-2009 11:43:08
Could not initialize the Service Manager FNDSM_HRMDEV_DEV. Verify that HRMDEV has been registered for concurrent processing.
Routine AFPEIM encountered an error while starting concurrent manager FFTM with library /u01/oracle/DEV/apps/apps_st/appl/ff/12.0.0/bin/FFTM.
Check that your system has enough resources to start a concurrent manager process. Contact your s : 11-NOV-2009 11:43:08
Could not find service instance context for service instance number 804345408
Could not find service instance context for service instance number 804345408
Could not find service instance context for service instance number 804345408
Could not find service instance context for service instance number 804345408
Check that your system has enough resources to start a concurrent manager process. Contac : 11-NOV-2009 11:43:11
Starting STANDARD Concurrent Manager : 11-NOV-2009 11:43:11
Could not initialize the Service Manager FNDSM_HRMDEV_DEV. Verify that HRMDEV has been registered for concurrent processing.
Routine AFPEIM encountered an error while starting concurrent manager STANDARD with library /u01/oracle/DEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contac : 11-NOV-2009 11:43:11
Starting STANDARD Concurrent Manager : 11-NOV-2009 11:43:11
Could not initialize the Service Manager FNDSM_HRMDEV_DEV. Verify that HRMDEV has been registered for concurrent processing.
Routine AFPEIM encountered an error while starting concurrent manager STANDARD with library /u01/oracle/DEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDLIBR.
Starting OAMCOLMGR Concurrent Manager : 11-NOV-2009 15:13:32
Could not initialize the Service Manager FNDSM_HRMDEV_DEV. Verify that HRMDEV has been registered for concurrent processing.
Routine AFPEIM encountered an error while starting concurrent manager OAMCOLMGR with library /u01/oracle/DEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Conta : 11-NOV-2009 15:13:33
Starting INVMGR Concurrent Manager : 11-NOV-2009 15:13:33
Could not initialize the Service Manager FNDSM_HRMDEV_DEV. Verify that HRMDEV has been registered for concurrent processing.
Routine AFPEIM encountered an error while starting concurrent manager INVMGR with library /u01/oracle/DEV/apps/apps_st/appl/inv/12.0.0/bin/INVLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact : 11-NOV-2009 15:13:33
Process monitor session ended : 11-NOV-2009 15:13:33
please help and guidance
Regards
Batara

Mail can't send email from 123-reg accounts

Hi all,
I've got an issue with Mac Mail can’t send email from 123-reg accounts.
I know there is a lot of articles on simular matters and some I have tried out with no luck, others are just speaking a whole other language.
Any help would be greatly recived, here's my situation below:
Running a iMac 2.8GHz Intel Core i5 on OS X 10.8.3
I’m using 3 accounts on Macs Mail client, one is my iCloud account that is working fine and the other two are my 123-reg accounts that I use for business purposes. I’ve been working like this for a couple of years now and about 6 months ago I upgrade my operating system from Snow Leopard to Mountain Lion.
2 or 3 months ago I randomly got a problem where I was unable to send any emails from my 123-reg account, I could only receive emails. I checked my settings and they were all correct and unchanged so I attempted to delete them and recreate the account but with no such luck.
I then decided to check if it was a problem at 123-regs end and attempted to log into web mail. This worked and was able to both send and receive emails so eliminated that possibility.
I also have these accounts set up on my iPhone, so checked if there was any issues and everything was working fine. I then checked my iphone details and made sure the same was on my desktop and still no such luck.
I’ve tried out some of the articles I’ve found on here (the ones written in plain English) still no results. I’m not very IT illiterate and just wondered if anyone else has got any ideas, whether there is something specific with 123-reg accounts and Mac Mail?
Many thanks.

Thanks
I just had another hunt around looking at posts and discovered that it was because I recently changed to BT Infinity and they had a block on.
I didn't even think to question the ISP.
https://discussions.apple.com/message/21173608#21173608

Can I use both newly cloned MBPR retina and old-MBP with same Time Machine

When my new-MBPR retina cloned from the old-MBP back up in Time Machine via migration assistance, will this newly-cloned MBPR continue thereon backing up with the same old-MBP back up in Time Machine? I.e. continuing same timeline?
And what happen to my old-MBP back up, if I continuing to use my old-MBP with the same Time Machine on? Will TM recognised 2 different MBP and thus creating 2 back ups? I seem to have problem to keep 2 MBP running with same TM. Programs not responding even force quitting them!
And what should I do to use both? Appreciate your help. Thank you.

OK, but in general I can use this one device as both file storage and Time Machine.
I thought that (for some reason) once I set up the Time Capsule to act just as Time Machine storage I would be unable to access it as a plain file storage.
I have just tested it now, and it seems it can work as both - file storage and Time Machine. I can see the Time Machine backup file on it and folders where I can dump regular files.
The only thing I would need to occasionally do is delete some old backups to keep Time Machine segment below 1 TB just so I have plenty of space for regular files.
This thing is awesome. :)

Photoshop cc 2014 suddenly trouble with cloning and healing tool

I just updated photoshop cc 2014. I use a wacom tablet. Suddenly, when I use the healing brush or cloning brush. The brush control panel pops up and the tool simply doesn't work. After repeated attempts, I do succeed in getting this to work. Sure slows me down though.

Sorry for the lack of the report it was my first time reporting an error for software... Never had an issue before.
I haven't experienced the crash via text tool since I posted the question, but the Photoshop is still constantly crashing at startup, but every time I try to enter the report I get the error: Please try again later.m5

Cloned HD running Snow Leopard won't boot in new MBP running Lion., cloned HD running Snow Leopard won't boot in new MBP running Lion.

Hi, I've seen a lot of discussion on this topic but nothing specific to my situation. I have two macs, a personal mac (macbook running Snow Leopard vers. 10.6) and a newer work macbook pro (late 2011 running Lion vers. 10.7.5). I want to use some of the applications at work (that is on the Macbook Pro) that are on my home macbook with Snow Leopard. I cloned the entire HD of my Macbook onto an external drive. The clone seems to have worked as I can use it as a boot disk for the macbook (from which it was cloned). However, if I try to boot the MacBook Pro running Lion, with this same clone on the external drive it won't work. I get a bit of text in the background and an overlay in dark grey saying (in several languages) restart the Mac by holding down the start key etc. I don't know if this has to do with the kernel panic problem or the Lion restore disk business. I don't see the point in trying to do an internal partition of the MacBook Pro hard drive and then add the cloned Snow Leopard, if I can't get the thing to boot externally as it is.
Does anyone have any fixes for what really should be a simple proceedure but is not?

Make sure the mac you are cloning from has the combo 10.6.8 update applied to it. The late 2011 models need at least 10.6.7 and better with 10.6.8. So if your older mac is running anything lower than 10.6.7 it will not boot on the 2011 model.

Hard drive keeps cloning itself in finder

This is the second time I saw this on a Mac, and never happened to me before (being working in a AASP for the last 9 years)
The disc fails, and won't boot, but you can see all the data starting up in Target or mounting the HD as an external device in a known good computer and system.
But, after a few minutes the disc mounts again as a new FW external drive, and kees doing it as long as its conected.
I was able (apparenty) to extract all the info, conning it with third party software, but, the surprise is that none of the cloned files worked.
Disk utilities repairs the volume, and restores permissions... but the disc fails again.
I've tryed disc warrior (wich is unable to fix the drive as it keeps mounting itself every few minutes) techtools, data rescue... all with the same result, the drive seems to be repaired but as it keeps clonning or mounting, eventually fails again, and no data can be copyed if the copy time tooks more time than the time the drive takes to cole itsef agai.
So, any idea what this could be?
any possible solutions or work arounds to extract the info?
Even GSX didn't know what that was, at least a few months ago...
I will appreciate any ideas.
(Mac OsX 10.7 installed on bad HDD, OsX 10.7, 10.8 & 10.9 tryed to solve this matter)
* One common error when trying to copy items is: The finder can't complete the operation because some data in ".DS_Store" can't be read or written. (Error code -36)
Picture shows three FW external units identical to each other.. (as it turns to be the same one replicating itself)

Assume for second your drive has failed totally, and get another backup drive to backup your source.
Once backed up you can determine how bad the failure is with Disk Utility Repair Disk, or if not revealing Alsoft Disk Warrior. Always have at two known working copies of your data at all times.

Reg: s/w Cloning

Similar Messages

Maybe you are looking for