Reg SAP ECC
Hi friends!!
SAP ECC professional its any functional consultant... like PP,CRM
I dont now about SAP ECC .. its version r some functional consultant
An upgrade to the latest release, SAP ECC(Enterprise central component)6.0, lands you on SAPu2019s new software-delivery roadmap. This is the u201Cgo-tou201D release for all customers currently on SAP R/3. From now on, all new functional enhancements to ERP through 2010 (when the next major synchronized release for SAP applications will take place) will be made available as optional enhancement packages for SAP ECC 6.0. Since all enhancements will be enterprise SOA-based, you must be on an enterprise SOA-enabled core (SAP ECC 6.0/SAP NetWeaver 7.0) to use them. The upgrade to SAP ECC 6.0 gets you to an enterprise SOA lifestyle; preparation for it is key. It also begins to highlight your needs for enterprise SOA components (for example, portals, middleware or service bus, development tools, and service repositories).
Must you upgrade to SAP ECC 6.0? Eventually, yes, but some customers are taking it in stages. Theyu2019re using SAP ECC 5.0. Some have upgraded to SAP R/3 4.7 as an interim solution:
Upgrading from R/3 4.6 to R/3 4.7 avoids extended maintenance fees for a while. Other reasons to go to R/3 4.7 are the ease of the upgrade (no new technology) and the ability to handle the migration with in-house staff (no new skills but additional time on the maintenance clock needed).
Upgrading to SAP ECC 5.0 instead of SAP ECC 6.0 is more typical. With SAP ECC 5.0, you donu2019t need to update to the Unicode database. If you upgrade to SAP ECC 6.0, you need to address the Unicode database conversion, so you have two upgrades to consider.
The complexity of the decision-making process stems from balancing your appetite for technical evolution and innovation with your ability to justify the migration. The SAP ECC 6.0 migration is the most challenging yet, but any release lower than SAP ECC 6.0 compromises your ability to use the enhancement packages and the full functionality of SAP NetWeaver.
Both R/3 4.7 and SAP ECC 5.0 are Unicode-compatible (but not Unicode-required), so you could upgrade ERP first and later upgrade the database to Unicode. But SAP skipped SAP ECC 5.0 for some industry solutions, so SAP ECC 6.0 became the de facto standard.
Thanks
Plz reward if Useful
Richa khosla
Edited by: Richa Khosla on May 19, 2008 9:01 AM
Edited by: Richa Khosla on May 20, 2008 7:02 AM
Similar Messages
-
Reg SAP ECC IDOC documentation
Hi Friends
Where we can get SAP ECC IDOC documentation help for especially Functional Consultant.
Thanks In Advance
Regards
SRHi Ravi,
Hope this links will fullfill your need.
http://www.sdn.sap.com/irj/sdn/ale
http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-a-step-by-step-approach/technology/sap/18/
Thanks
Vinayak -
Hello Everyone,
If any changes are done in SAP BO Analysis office, then the change can be done in the SAP BW in the respective Targets.
But how can we do the changes in the SAP ECC ? Is it possible to do the changes in the tables ?
Any answer is appreciable
Regards,
KarteekWe are using the "Input ready Bex query", in order to modify the values in "BO Analysis office".
ECC BI BO Analysis office
1 -------------> 1 ----------> 1 ------
|
| (Now Data is changed in Analysis office from 1 to 2)
|
(?) <-------------- 2 <---------- 2 <-----
(Will it be updated in ECC)
(Diagram Explanation)
From ECC we can load the data (Consider Value-1) to SAP BI and from SAP BI we can load the data to BO analysis office.
So, now if we change the data in BO Analysis office (Value-1 changed to Value-2)..
Now the data is changed in SAP BI to Value-2.
So what about the data in ECC ? Whether it is changed or not?
Please provide us a real time business Scenario..
Thanks,
Karteek -
Reg: Replacing i-way with PI for SAP ECC 6.0 version
Hello Experts
currently we are using R/3 4.7 version and middle ware we are using is i-way and we are planning to upgrade to ECC 6.0 and i would like to know how compatible is i-way is with SAP ECC 6.0 and is there any neccessity to replace the same with PI.
and currently we are using RFC as a method of communication between R/3 and i-way and in future i don't want to change the existing coding , is it feasible to use PI via RFC.
As i am ABAPer, i am new to this PI and please let me the know the risks involved and it is viability.
Thanks and Regards
S.JanagarHi Gavin,
you should always use the SQL EE for SAP installations (because of additional features that only come with EE).
Concerning SQL 9 or SQL 10, I would definitely go for SQL 10. It has some nice features like Backup Compression, Page/Row Compression and so on. Have a look [here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a236a2-8104-2b10-5ebe-8fef61cc82fd]. Just make sure that your installation meets the SR3 requirements.
We already have SQL 10 in production and did not encounter any problems.
Regards,
Sven -
I am trying to understand if the following interface options can occur (without the use of SAP PI or any other middleware):
Option 1A: Can I process an SAP ECC outbound IDoc in XML using TCP/IP to a non-SAP 3rd party system? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 1B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used TCP/IP? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 2A: Can I process an SAP ECC outbound IDOC in XML using HTTP to a non-SAP 3rd-party system? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 2B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used HTTP? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 3A: Can I process an SAP ECC outbound IDOC in XML using FTP to a non-SAP 3rd-party system? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 3B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used FTP? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?Hello Kirk ,
The answers for your question are:
Option 1A: Yes you can .you can use TCP/IP but you must have a middleware component for that such as BC/JCO .
Please see the link : [http://help.sap.com/saphelp_nw04/helpdata/EN/09/c88442a07b0e53e10000000a155106/frameset.htm]
Option 1B: See the link above.
Option 2A: You can use ABAP code :
[http://help.sap.com/saphelp_nw04/helpdata/EN/e5/4d3514c11411d4ad310000e83539c3/frameset.htm]
Option 2B: [http://help.sap.com/saphelp_nw04/helpdata/EN/90/4f3c2ec3c511d6b2b400508b6b8a93/frameset.htm]
Option 3A: Only with ABAP code :[Reg: FTP Connection;
Option 3B: See the link of Option 3A.
Good Luck,
Boaz
Edited by: Boaz Ornan on Feb 21, 2010 4:33 PM -
Layout 2.00 com mensageria "Z" - Aplicação de Notas no SAP ECC
Olá pessoal,
Estou participando de um projeto para implementar a versão 2.0 do XML em um cliente que não tem a mensageria startard (GRC).
Já levantei as notas necessárias no SAP ECC (estão num total de 42).
A mensageria Z, muito semelhante do Acelerador/GRC pois também foi desenvolvida em uma instância SAP com o PI como integrador, deve trabalhar da mesma forma que o GRC no sentido de permitir o envio das duas versões (1.10 e 2.00) em paralelo através da configuração de Business Place no SAP ECC.
Minha dúvida é a seguinte:
Há algum impacto para as execuções na versão 1.10 se aplicarmos as Notas OSS no SAP ECC num primeiro momento e depois começarmos as adequações na mensageria?
Desde já agradeço,
DanielaOlá Daniela,
Aplicando as SAP notes, a estrutura do FM J_1B_NFE_XML_OUT (que é utilizado outras mensagerias - não SAP) é alterado com a inclusão de novos parâmetros de importação, porém estes são opcionais o que não irá impactar a solução de mensageria não standard.
Lembre-se também de não alterar a versão do XML (IMG: Cross-Application Components, choose General Application Functions --> Nota Fiscal --> CNPJ Business Places --> Define Business Places).
E caso as SAP notes relacionadas aos motivos de contingência estejam sendo aplicadas agora, será necessário que o funcional realize as configurações necessárias (motivos de contingência) conforme descrito na Note 1451966 - NF-e: contingency date, time and reason .
At.
David -
SAP (ECC 6.0) - Erro de rejeição (Engrenagem)
Boa tarde a todos,
Gostaria de compartilhar um cenário de erro ocorrido no ambiente de produção do cliente (pós-GoLive) onde implementamos recentemente Nota Fiscal Eletrônica.
Para um determinado cenário enviado para SEFAZ/SP foi retornado o código de erro 210 (Rejection: Invalid Receiver's IE), esta mensagem foi devidamente atualizada no GRC e no SAP (ECC).
O problema ocorreu justamente quando o usuário optou em ajustar o código de inscrição estadual do respectivo cliente deste cenário e logo após, selecionou o documento "rejeitado" através do monitor do SAP (J1BNFE) e executou a função "Enviar de Novo", a partir deste procedimento (incorreto), o monitor retornou uma sinalização de erro (bandeira vermelha) com a seguinte mensagem: "Enviada ao sistema de envios de mensagens (XI,....), sinalizou o campo status ação com uma "engrenagem", o campo SCS com o valor 0 "zero" e o campo Status Sist. Msgs. com o valor "G" (MS recebido; outro erro).
Conclusão, este processo encontra-se travado no ambiente de produção do cliente, impossibilitando qualquer ação de inutilização ou cancelamento.
Estamos cientes que o procedimento correto deveria ser: solicitar a inutilização deste documento e não enviá-lo novamente a SEFAZ/SP, após concluída a correção da inscrição estadual do respectivo cliente, no entanto, gostaríamos de obter alguma dica ou orientação de como proceder corretamente neste caso afim de corrigir este problema.
Desde já agradeço pela ajuda e gostaria também de parabenizar pelo espaço onde pude verificar que há muita informação útil para todos.
Att,
André TeixeiraOi Henrique,
Sim, o MSSTAT estava preenchido com "A" antes da tentativa de reenvio. Como a nota já havia sido rejeita pela SEFAZ/SP no nosso entendimento o usuário deveria:
1) Requisitar a "inutilização" desta NF-e;
2) Ajustar a IE no cadastro de cliente;
3) Executar novo faturamento para este cenário que automaticamente iria gerar uma nova NF-e para nova aprovação na SEFAZ/SP, seria este o procedimento?
Ao executar Send no menu NF-e apresenta-se a seguinte mensagem:
Novo status de comunicação de sistema "Enviada a sistema de envio de mensagens (XI,...)" não permitido p/SCS "Enviada a sistema de envio de mensagens (XI,...)" anterior
Nº mensagem J1B_NFE007
Vou conversar com usuário sobre a possibilidade de introduzir o status de erro manualmente (SE37).
Grato,
André Teixeira -
SAP ECC error:'Migration Monitor' exits with error code 103.
Hi All,
I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
I am stuck at the import ABAP.Getting error
ERROR 2008-08-08 16:10:53
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
1) imort_monitor.java.log-->contains
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
Loading of 'SAPVIEW' import package: ERROR
Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
2)import_monitor.log
ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-08-08 16:10:52
All import packages are processed.
WARNING: 2008-08-08 16:10:52
1 error(s) during processing of packages.
INFO: 2008-08-08 16:10:52
Import Monitor is stopped.
3)SAPVIEW.log
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001" ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001", T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(DB) INFO: disconnected from DB
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
Only SAPDB: SAPSID srvice of SAP DB is only up.
No other services of database are up.And i am not able to up the other services also.
Is it required to up the other services?
If not?
Why this error is occuring?
Any help will be appreciated.
Thanks&Regards
Manisha dasHello Manisha,
The one of the possible reasons for this is due to lack of H/W.
Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
If the issue is with H/W, then this should fix the issue.
Hope it helps,
Regards,
Satish. -
RFC connection from SAP Data services to SAP ECC
We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP gateway and service is name is correct.
Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
Thanks in advance for helping to solve the RFC connection issue.
Edited by: gupta sasha az on Dec 19, 2011 7:24 PMI am new to SAP and we have just started work on Data Services.
I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
Thanks for your help and time. -
Sap Ecc 6.0 Installation error in Import Java dump e
Hi Friends,
I got error in Phase 20 of 45:-
ERROR 2015-08-06 17:01:26
CJS-30049 Execution of JLoad tool 'E:\j2sdk1.4.2_12\bin\java.exe -classpath "E:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/lib/iaik_jce.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/jload.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/antlr.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/exception.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/jddi.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/logging.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/offlineconfiguration.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/opensqlsta.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar;H:\usr\sap\ECC\SYS\exe\uc\NTI386\ojdbc14.jar" -sec ECC,jdbc/pool/ECC,
ecc6/sapmnt/ECC/SYS/global/security/data/SecStore.properties,
ecc6/sapmnt/ECC/SYS/global/security/data/SecStore.key -dataDir E:/sap_kol/javacomponent\JAVA_EXPORT\JDMP -job "E:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jload.java.log' for more information.
ERROR 2015-08-06 17:01:26
FCO-00011 The step importJavaDump with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
INFO 2015-08-06 17:16:48
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump".
Kindly help me!!
AnuskaHi Markus, Debashis , Uday and Friends,
I am currently Watching Thread.
Plz Help Me.
Regards,
Anuska -
SAP Personas using SSO to connect SAP ECC
Hi,
We configured SAP Screen Personas test landscape.
When I launch the mainapp page, the system is prompting for user credentials.
Then I get "System Selection" screen where the system I have configured (SAP ECC).
When I click on system backend, an new popup ask for user and password (SAP ECC credentials).
We are trying to understand if it is possible configure SSO to access ECC backend.
So, the ECC backend credentials will not be required anymore.
I am not sure if it is possible this configuration.
According SAP note 1684886 - License conditions of SNC Client Encryption, I think this scenario requires additional license.
Any help to resolve this is highly appreciated.
Best Regards,
Leonardo.The project requirement is avoid the user can log in with SAPGUI and run the standard transaction.
So, the user can log in only with SAP personas user/password and run the transaction on backend with a modified screen with the restrictions of authorization roles.
Regards, -
ITS is not working after the Upgrade to SAP ECC 6.0
Hi Folks
ITS is not working as it supposed to be after upgrading to SAP ECC 6.0
When I try to connect thru ITS i m getting HTTP 404 and HTTP 500 Errors
Can some one throw some ideas.
But web AS is running perfectly alright.
Thanks
JayHi Priya,
You need to Implement the following SNOTE's for these changes.
Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
Tax Surcharge Rate
Increase in Conveyance Allowance
Section 80
Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
2139208 - Union Budget Changes – 2015
2138605 - Sec80C: Sukanya Samriddhi Scheme
Upcoming Developments:
PF Admin Charges Revision
Professional Tax for Mizoram & Nagaland states
Average Rate of Tax
Regards,
Venkat Polisetty -
SAP EarlyWatch Alert in SAP ECC and SAP PI
Hi Experts,
Every week in SAP EarlyWatch Alert report in PI as well as SAP ECC, shows PI consuming highest resource in SAP ECC by the SAPMHTTP.
Example as below:
Initial System
Initial Action
Total Resp. Time in s
% of RFC Load
Avg. Response Time
Avg. CPU Time
Avg. DB Time
Avg. Roll Wait Time
PI
SAPMHTTP
200.261
15,00
600,3
70,4
165,4
1,5
The total response time in SAP ECC by PI system is 200261 secs.
I have checked the interfaces which connects SAP ECC with RFC and calculated the processing time for all messages in PI. But that time is much less than the above total response time.
Can you please help me understand how to validate this with the messages that are getting processed through PI using RFC?
Thanks in Advance.Hello Pascal,
No There is no possibility to get the Diaglog response time and the number of users as similar to a ABAP EWA report in a JAVA EWA report.
This is because of the fact that the checks for both these system types are different.
Regards
Amit -
Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM
Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich WortmannI would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use. -
CJ20N is not working in SAP ECC 6.0
Hello Everybody.
In my SAP ECC 6.0 I log in SPANISH and launch tcode: CJ2ON - Project Builder and it transaction code does not work my session hangs and the message in the status bar is:
STARTING APLICATION PROJECT BUILDER (English)
Inicio Aplicación Project Builder (Spanish)
For my Customer is a must to use this tcode in Spanish. In English this transacction works fine.
Here the level components:
SAP_BASIS | 700 | 0006 | SAPKB70006 | SAP Basis Component |
SAP_ABA
700
0006
SAPKA70006
Cross-Application Component
PI_BASIS
2005_1_700
0007
SAPKIPYJ77
PI_BASIS 2005_1_700
ST-PI
2005_1_700
0002
SAPKITLQI2
SAP Solution Tools Plug-In
SAP_BW
700
0006
SAPKW70006
SAP NetWeaver BI 7.0
SAP_AP
700
0003
SAPKNA7003
SAP Application Platform
SAP_HR
600
0003
SAPKE60003
Human Resources
SAP_APPL
600
0003
SAPKH60003
Logistics and Accounting
EA-IPPE
400
0003
SAPKGPID03
SAP iPPE
EA-APPL
600
0003
SAPKGPAD03
SAP R/3 Enterprise Add-On PLM, SCM, Financials
EA-DFPS
600
0003
SAPKGPDD03
SAP R/3 Enterprise Defense Forces & Public Securit
EA-HR
600
0003
SAPKGPHD03
SAP R/3 Enterprise Add-On HR
EA-FINSERV
600
0003
SAPKGPFD03
SAP R/3 Enterprise Financial Services
FINBASIS
600
0003
SAPK-60003INFINBASIS
Fin. Basis
EA-PS
600
0003
SAPKGPPD03
SAP R/3 Enterprise Public Services
EA-RETAIL
600
0003
SAPKGPRD03
SAP R/3 Enterprise Retail
EA-GLTRADE
600
0003
SAPKGPGD03
SAP R/3 Enterprise Global Trade
ECC-DIMP
600
0001
SAPK-60001INECCDIMP
DIMP
ERECRUIT
600
0003
SAPK-60003INERECRUIT
E-Recruiting
FI-CA
600
0003
SAPK-60003INFICA
FI-CA
FI-CAX
600
0003
SAPK-60003INFICAX
FI-CA Extended
INSURANCE
600
0003
SAPK-60003ININSURANC
SAP Insurance
IS-CWM
600
0003
SAPK-60003INISCWM
Industry Solution Catch Weight Management
IS-H
600
0003
SAPK-60003INISH
SAP Healthcare
IS-M
600
0003
SAPK-60003INISM
SAP MEDIA
IS-OIL
600
0003
SAPK-60003INISOIL
IS-OIL
IS-PS-CA
600
0003
SAPK-60003INISPSCA
IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT
600
0003
SAPK-60003INISUT
SAP Utilities/Telecommunication
SEM-BW
600
0003
SAPKGS6003
SEM-BW: Strategic Enterprise Management
LSOFE
600
0003
SAPK-60003INLSOFE
SAP Learning Solution Front-End
| ST-A/PI | 01H_ECC600 | 0000 | - | Application Servicetools for ECC 600
Have you experienced this issue, can you please give your ideas to solve it ?Hello,
SWUF is workflow runtime system administration? Seems it disappeared in 4.6 or 4.7.
Try SWDC_RUNTIME and SWDC_DEFINITION - not sure if they are in ECC6.
Let us know if this is the solution.
regards
Rick Bakker
Hanabi Technology
Maybe you are looking for
-
Multiple Macs with multiple user accounts
I have a Mac computer connected to airport and use Time Machine for backups. This works well. I have now purchased a second Mac and would like to include this second Mac so that I can move between Macs and work. There does not appear to be any mechan
-
Portal - BI, sapdp00 not reached, WSAECONNREFUSED: Connection refused
Hello, I have a problem with the connection between portal 7.0 and bi 7.0. I want to logon into the bi over the portal. The bi and the portal are on the same host. It´s an ABAP + Java installation. 1. I created the connection in the portal System Adm
-
How do i stop my monthly payment for photoshop
how do i stop so i dont have to pay monthly no more i dont want photoshop no more?
-
Validation programm needed for the xmlfile generated from Oracle apps
Hi , I Generated an xml file from concurrent program .i need to perform validation to that xml file. Is there any program which can validate it. It is very urgent . Thanks®ards, sireesha
-
How do I upgrade OS 10 (10.5.8) to Lion on My Imac?
Have an IMac whose purchased date may extend back 4-5 years. Currently running 10.5.8 and am trying to update the OS so I can run the current version of VM Software (ver 5) that I found out only runs on the more updated Mac OS's. The serial number of