Reg: SAP HR ---how to apply Dynamic actions

Hi Gurs,
Whenever subgroup RH to RS or RS to RH change then only it will create the infotype 8.Otherwise it will create the COPY for the infotype 8.
We did the configartion but whnever RH is coming then only it was showing as create.it was not comparing..But we need whenever to change subgroup RH to RS or RS to RH then only it will create the infotype 8 otherthan these two it will copy for the infotype 8.
Ex: if we change RH to CB then it will Copy the infotype..If we change CB to RH then it will create the infotype..
Can you please advise me whether we need to do any dynamic actions..bcease recently moved to functional..I dont have much idea about the functional side...
Can you please suggest me if we need to dynamic actions please provide me the steps how to follow..
Waitng for your response...
Regardds,
Kiran.

hello Kiran..
Is this requirement when you try to change any employee in PA30 ?
If yes, I think we can do this using BADI
BADI: HRPAD00INFTY
In this we have a method called AFTER_INPUT ...I think here we can read the current employee subgroup value from the
parameter I503 and read the old value of subgroup from the infotype 0002 and then compare from RS to RH or RH to RS..
then if it changes create infotype 8....for creation or copy use HR_INFOTYPE_OPERATION function module....
Hope this helps...please let me know

Similar Messages

How to include dynamic action in bdc

Hi All,
I want to update infotype 17 when an employee has joined through PA40 (Joining action).So i have written a dynamic action for this .But this dynamic ation does not get called in bdc for joining action.
So infotype 17 is not maintained if we do joining through bdc.
I have tried with user-exit zxpadu02 also, calling hr_infotype_operation on saving infotype 0001.But it gives return as 'Employee does not exist'.
Since that infotype 0001 is still not saved.
So what to do.
Yogesh

Hi Amit,
For your information we can call dynamic action from BDC.
go through this link
how to include dynamic actions in bdc

How to create dynamic action

hi friends,
could u plz tell me how to create dynamic action?
with regards,
Priya.S

Hi
I u need to write the dynamic action as below
0002     ANZKD     06     3     P     PSPAR-TCLAS<>'B'
0002     ANZKD     06     4     P     T001P-MOLGA='12'
0002     ANZKD     06     5     P     P0002-ANZKD>='1'
0002     ANZKD     06     6     I     INS,0021,2,,(P0002-BEGDA),(P0001-ENDDA)
This should help you. rewards
Regards
Suresh

How to maintain Dynamic Action for Infotype 2 .

Hi SAP-HR Experts .
I want to maintain Dynamic Action for Infotype 2 .
If Employee's No. of Children exceeds then System immediately ask for maintenence of IT-21 also at the same time .
How to maintain code in table V_T588Z .
Please elaborate it .
Thanks & Regards : rajneesh .

Hi kanupriya .
your reply was Very helpful for me u2026But i unable to achieve the desired result . I maintained the entries in View V_T588Z like this .My Objective is when some body update the Infotype 2 for a employee , and his/her no. of Childrens exceeds by 2 then system should jump into IT-21 for
updation of IT-21 at the same time . I think this what Dynamic Actions work out .
==========================================================
     ANZKD 04 500 P PSPAR-TCLAS='A'
     ANZKD 04 175 P T001P-MOLGA='40'
     ANZKD 04 176 P P0002-ANZKD>='2'
     ANZKD 04 177 I INS,0021,2,01
     ANZKD 04 178 I INS,0021,2,02
==========================================================
Please suggest me what to do , as the above entries are not workout .
Your help will be very appreciated.
Regards ,
rajneesh(9873607039)

How to Use Dynamic Action ?

Dear All,
i am using Apex 4.1 Ver.
i need return value in text Area Item when i select any Value in Select List.
i have One select List Item :p1_template_id and one text Area Item P1_template_description .
Select List Code
SELECT TEMPLATE_NAME D, TEMPLATE_ID R FROM TEMPLATE_MAS ORDER BY TEMPLATE_NAME
Table Name
CREATE TABLE "CRM_CAM_TEMPLATE_MAS"
   (     "TEMPLATE_ID" VARCHAR2(50) NOT NULL ENABLE,
     "TEMPLATE_NAME" VARCHAR2(500) NOT NULL ENABLE,
     "DESCRIPTION" CLOB
      CONSTRAINT "CRM_CAM_TEMPLATE_MAS_PK" PRIMARY KEY ("TEMPLATE_ID") ENABLE
/i want to Value of DESCRIPTION Column in to Text Area Item when i select Template ID from Select List .
How can i do this with Dynamic Action or any other Way ?
How can i do this ?
Thanks
Vedant

Hi Kiran,
i have done it with Text Area but when i change text Area with Rich Text Editor then it's not Working.
How can i do this with Rich Text Editor.
My Code
Application Process
DECLARE
   v_mgr VARCHAR2(4000);
   CURSOR cur_c
   IS
SELECT DESCRIPTION FROM TEMPLATE_MAS WHERE TEMPLATE_ID =:TEMPLATE_ITEM ;
BEGIN
   FOR c IN cur_c
   LOOP
      v_mgr := c.DESCRIPTION;
   END LOOP;
   OWA_UTIL.mime_header ('text/xml', FALSE);
   HTP.p ('Cache-Control: no-cache');
   HTP.p ('Pragma: no-cache');
   OWA_UTIL.http_header_close;
   HTP.prn ('<body>');
   HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
   HTP.prn ('<item id="P1_SUMMARY">'||v_mgr|| '</item>');
   HTP.prn ('</body>');
EXCEPTION
   WHEN OTHERS
   THEN
      OWA_UTIL.mime_header ('text/xml', FALSE);
      HTP.p ('Cache-Control: no-cache');
      HTP.p ('Pragma: no-cache');
      OWA_UTIL.http_header_close;
      HTP.prn ('<body>');
      HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
      HTP.prn ('<item id="P1_SUMMARY">'||SQLERRM||'</item>');
      HTP.prn ('</body>');
END;
Java Script
<script language="JavaScript" type="text/javascript">

</script>
HTML Form Element Attributes
onChange="pull_multi_value(this.value)";
For Riich Text Editor i have changed these value in Application Process and table column data Type
v_mgr clob;
DESCRIPTION Column Type Clob
How can i do this with Rich text Editor /
Thanks

How to make dynamic actions using Set Value work in all browsers?

I’m having a cross-browser incompatibility issue with dynamic actions using Set Value. The dynamic action works like a charm on Chrome but has no effect on either IE or Firefox. The code in oracle.apex.com and here are the credentials:
Workspace: DDBA
Username: [email protected]
Password: redtruck12
These code is on page 3 and here are the details:
There are two report lists (Standard and Special) and some of the reports require additional information supplied in either select lists or text boxes.
If the user selects a Standard report requiring a select list/text box, then the dynamic action sets the value of Special Reports to NULL (and vice-versa).
The dynamic action is to prevent a simultaneous selection of both the Standard and Special reports. To see how it works on Chrome, do this:
Run Page 3
Select the ‘Report for Search Criteria’ option from the Standard Report list. A ‘Search Criteria’ text box appears
Select the ‘Report by Release’ option from the Special Reports list. A select list appears and the ‘Search Criteria’ text box disappears.
If you do the same things on IE or Firefox, the text box does not disappear.

Hi,
Things are going wrong with setting the item values to NULL. If you check your session state, you'll see that in chrome your items values indeed will be set to null, but in firefox they won't.
Also I've noticed that you don't reset the other input fields, so their values persist in the session state. Since you submit your page every time you change one of the report select lists, this might lead to unexpected behaviour. Lastly, I've noticed you use a sql exists expression to manage the display/hide of your page items. A condition of type "Value of expression 1 = expression 2" causes less overhead as you don't need to switch to the db sql engine for every item to validate.
I'd suggest you rethink your specs and try to create:
- One dynamic action (since a value of standard select excludes the value of special select, and vice versa)
- Set the values for hidden items to null, also in session state
- Use a refresh of region as extra event in your dynamic action, instead of submitting your page for every change.
Regards,
Vincent
http://vincentdeelen.blogspot.com

How to trigger dynamic action

hi all,
i am using HR_INFOTYPE_OPERATION to update or insert data in infotype 0000. it has been updated but i am also want to insert data in P0001 for same employee number(pernr) and same data. i want to do this with dynamic action. is it possible?????
thanks
Sachin

Hi Ajay,
When you use BDC or FM to update infotype, you can not call dynamic action as it wont be supported by SAP.
So if you wnat to meet your requirement you have to create one RFC FM inside which you can call from the user exit or after your code had executed the FM operation and got the success message you can call the same FM for updating other infotypes.
The best approach can be to create BDC sessions for updating each infotype after you have done with update of IT0000.
Hope this will help you in resolving your queries.
Regards,
guds

How to call DYNAMIC ACTIONS

hi experts,
i have an subroutine for dynamice action for creating IT2006 with me.
but i dont no where to call that subroutine can anyone plz tell me how to do this.
where should i write perform statement.
for eg. i want to call that action while creating /changing the record in IT0001.
plz do ASAP.
thanks in advance.
vinod.

HI,
Go to IMG>Personnel Management>Personnel Administration>Customizing Procedures>Dynamic Actions
Or Use table T588Z.
Have a look at these links
http://wiki.ittoolbox.com/index.php/Dynamic_Action
http://www.hrexpertonline.com/downloads/Rehan%20Zaidi%20Online%20Portion.doc
Reward points if Helpful.
Regards,
Manoj.

How to Handle Dynamic actions in batch mode???

Hello Experts,
We have a requirement where we need to automate PA40. The data would be sent in csv file and we need to perform the required steps to insert data into Infotypes.
The issue is in batch mode (background mode), the dynamic actions wouldn't be called and the business wants the dynamic actions to be considered as well.
Pls let me know if there is any way we can interpret the dynamic actions dynamically; meaning the prog should be able to handle the newly created dynamic actions as well.
Any pointers to this are highly appreciated.
Regards
RK

Hi.
As far as i know, the limitation comes from the BDC execution itself, it doesn't really matter whether the execution is online or in batch mode.
* dynamische Massnahme
    IF sy-binpt EQ space.
*      befinden wir uns im ALE-Eingang ?
      CLEAR: ale_flag.                                   "XFYAHRK063273
      call function 'RHAP_ALE_FLG_GET'                   "XFYAHRK063273
        importing                                        "XFYAHRK063273
          ale_flg = ale_flag.                            "XFYAHRK063273
      IF ale_flag IS INITIAL.                            "XFYAHRK063273
        IF pspar-vinft NE space. "infotype view         "XYLPH9K007065
          PERFORM dyn_measure IN PROGRAM (view_repid).   "XYLPH9K007065
        ELSE.                                            "XYLPH9K007065
          PERFORM dyn_measure.
        ENDIF.                                           "XYLPH9K007065
        PERFORM process_m
One thing you could try to do to avoid this and get the dynamic measures executed is to use the NOBINPT variable of the OPTIONS structure in CALL TRANSACTION
DATA opt TYPE ctu_params.
opt-dismode = 'A'.
opt-nobinpt = 'X'.
CALL TRANSACTION 'PA30' USING bdcdata OPTIONS FROM opt.
PERFORM close_group.

How to use dynamic action to fill multi item on a page ?

Hi..
I want to fill multi items on a page so I build a dynamic action ( Execute PL/SQL Code ) to do it .The problem is that when the page loads I can't see any data and I tried to see the session values using debug and I found data. Moreover when I save the row I got these data saved.
So what is the magic there?
Thanks

Firstly, to get the multi-select populated with "pre-selected" values the easiest approach is to use Computation or Process at a process point On Load Before Header or After Header or Before Regions.
All you need to do is populate your "Select List " page Item with : (colon) separated list of selected values. E.g is you want A,B and C out of A,B,C,D,E selected then get A:B:C into the Page Item.
If you have used Dynamic Actions, what is your event on which the action fires? For Dynamic-Actions the page (HTML DOM) needs to be existing , so it must fire after the page has loaded.
Regards,

How to process Dynamic Action in BDC

Hi friends.
We are using HR_INFOTYPE_OPERATION to update some infotypes. The problem is that dynamic action does not get triggered as SY-BINPT = 'X' when we use this FM or BDC to update.
Now, is there any workaround so that we can process dynamic actions via our program?
Can somehow we call the subroutine DYN_ACTION from our program? Can the values of PSAVE etc be availabe in our program?
Thanks in adv!

Hi
Its kind of complicated to code dynamic actions in your BDC code. However , I would try my best to make you understand.
1. Make a BDC recording of the source screen.
2. Dynamic actions are stored in table: T588Z. Now during your screen processing of BDC data, you have to check the conditions yourself whether this was the condition which triggers the dynamic action.
3, Make another BDC recording of the target screens which are called due to dynamic actions. Now if the condition in the source screen is fullfilled and you have to call a dynamic action then direct your program flow to the BDC recording of the target screen and update all the fields which would be updated by Dynamic Actions in the normal user interaction of that screen.
In short, you have to program all those things which Dynamic action does since BDC does not support dynamic actions.
Reward points, if helpful.
Regards
Waz

How to write dynamic actions for delimiting child subtype of IT0021

Hi ,
I need the dynamic actions for the below scenario:
In IT0021 , there is a child subtype '02'. This needs to be delimited to a new subtype 'XX' when the child reaches a certain age.
The above process needs to be automated..as in when the new subtype 'XX' is created, it should check the fields like date of birth , last name and on saving it , the corresponding child subtype screen should be called where the user can modify the end date and delimit the child subtype.
Please help me with the required dynamic actions..
Thanks.

Hi,
Just try this.
INFTY     SUBTY      FIELDN      FC NO.      STEP VARIABLE FUNCTION
0021      02      Field Name      P       TabName-FldName>=age
0021     XX               I         INS, 0021,XX/I
Regards,
Srini.

How to apply multiple actions on a single file in one go to generate multiple watermarked pdfs?

usually i need to create many watermarked datasheets for different customers using a single base pdf. currently i run individual actions for individual customers on the same file which means i have to runs 10s of individual actions every time i have new source file. can i make a single action or a script which will take a single source file, run multiple actions(~15-20) for watermarks and save these files separately? basically what i need is instead of running many individual actions i run a single action/script to make it automatic. if yes, how to do so?

Hi Monte,
You can achieve this by assigning a secondary extension to another button, but this might not be what you want, so if you can elaborate a little further as to what you want exactly I can help you with putting together a solution
Cheers,
David Trad.
**When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) **

Reg SAP BW - How to proceed?

Hi Guys and Gals I am Kiran. Currently I am undergoing SAP BW/BI training in Hyderabad. In a month or so I will be completing my course. I know you ppl are experts in this field.I want to attend interview inj Hyd initially before moving to B'lore. How should I start. Plz suggest me in this regard.
I donno if I can post these kind of queries? Please guide me.
Thanks in Advance
Kiran

hi,
but this is CRM and not BW forum - why do you ask here?
Regards,
michal

Configure Dynamic Actions

Hi All,
How to configure Dynamic actions?..I know that you need to create dynamic actions in Spro-PA-Dynamic actions. .what are the steps to be done after that ?.
Kindly provide with an example.
Regards
Eliz

HI Eliz,
A dynamic action has the following components.
Infotype Number (INFTY): specifies the infotype for which you want the dynamic action triggered
Subtype (SUBTY): narrows the focus to a specific subtype
Field Name (FIELDN): starts your action when a maintenance function is performed on a particular field
Function (FC): specifies the various maintenance operations to which your dynamic action would respond. They are 02 (change); 04 (create); 06 (create and change); 08 (delete); 10 (change and delete); 12 (create and delete). Dynamic actions are only applicable in maintenance operations, not in display functions.
Sequence Number (NO): refers to a sequential number.
Step (A): specifies a particular type of action. No dynamic action is executed if the function character has a value other than one of the following:
             P: Plausibility checks, which allow you to check certain conditions.
             I: Calls an infotype for processing
             W: Called after the I statement and used to assign values to screen fields while creating or copying another infotype record through the I statement
              F: Calls a FORM routine (subroutines in ABAP) during your action. The routine may reside in or out the module pool MPNNNN00.
             V: Lets you treat collectively a number of fields for which you want to define a common dynamic action
              M: Sends SAP Office mail
Variable function part: The variable function part along with the step indicator forms the core part of your action. It specifies the processing details when the dynamic action is triggered. For example:
The maintenance of dynamic actions is done via the view V_T588Z, as shown in Figure 1 (IMG menu path Personnel Management>Global Settings in Personnel Management>Basic Settings>Infotypes>Create Dynamic Actions).
Requirement: When the postal code or the city of an employeeu2019s permanent residence is changed in infotype 0006, an email should be sent to the administrator.
INFTY    SUBTY    FIELDN    FC          NO.    STEP       VARIABLE FUNCTION
0006           1             ORT01      06             001           V               PSTLZ
0006           1             PSTLZ      06             002           M               M0001
The V statement on line 001 is used to link the two fields to the M statement. The statements relevant to field PSTLZ are also applicable to the ORT01 field.
When a record is created or changed in infotype 0006 of permanent address, an email is sent using the feature M0001. Information such as the recipient address, subject, and content of the mail is derived from M0001
Warm Regards,
Kapil Kaushal

Reg: SAP HR ---how to apply Dynamic actions

Similar Messages

Maybe you are looking for