Reg SAP Integrated ITS in WAS

Hi all,
If i want to use Integrated ITS in WAS for external SAP Sytem, Do i need to install ABAP stack also???.
Regards
Vasu

Hello Vasudevan,
I am not sure if I understand you correctly, but if you are trying to connect the internal ITS from system, say, P01 to connect so system P02, that will not be possible. If that is not what you trying to do, kindly explain what you mean by "external SAP system".
Regards,
Jan

Similar Messages

Some problem about integrated ITS 640

How to change Webgui theme in integrated ITS 640
Dear all ,
My system is ECC5,the Package level it SAPKGPRC05,SAPKB64015,SAPKA64015,SAPKH500010.
now, I configure integrated ITS with T-code SICF .
I create a external aliases "/sap/bc/gui/sap/its/webgui" ,aAfter that I can connect to the
ITS with the following URLs:
http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
But now ,I have some problem cannot solve as follow:
1 When I logon ITS, the default language is English ,only English and Genman may be
selected,The requirement is that I want to use other language as the default logon language.
When I on the pop-up dialog box "Change External Alias" tab " Service data" ,"Anymous Logon
Data "select a Language "Chinese",the system pop-up a message box show "code page not
supported".how can i configure the default logon language ?
2 I hope use "https"-- Security Reqiurements ,as a security link ,so I selected "SSL",aAfter
that I can connect to the ITS with the following URLs:
https://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
IE show cannot find the web system .
And use the following urls:
http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
only show the logon page and notice the error "Logon not possible; none of the active logon
procedures is possible"
and how can I configure the "https" ? and must configure with se38 "W3_PUBLISH_SERVICES"
program together ,if like that ,i must republish all of the component again ?
3 I hope change the webgui theme , in ITS620 have theme 00,90 ,99 .and we can select
"EnjoySAP". but in integrated ITS 640 , i donot know where to find the its admin page to
setup the theme . can you tell me how can i find the admin page to setup the theme .
thanks all ,hope your reply !
Message was edited by:
Benson Lu

Hi,
Hope this Information is useful.
The SAP Integrated ITS only supports the new "Tradeshow" design (unlike the "standalone" ITS which also supports the well-known EnjoySAP design). The new design is more easily incorporated into the Enterprise Portal and is better adapted to the design of other SAP Web UI technologies (BSP, WebDynpro).
There are also changes to the header area in SAP integrated ITS in Tradeshow: The menu bar and standard toolbar functions are collected on either side of the transaction code field in the buttons "Menu" (on the left) and "System" (on the right). The application toolbar elements are then displayed to the right. Instead of symbols, the system displays the text description. If there is insufficient space to display all buttons, you can display the other elements by choosing the "More" button to the right of the screen.
Exceptions:
In Release 6.40 (NetWeaver 2004) , the new design is only available for the Internet Explorer. As of Release 7.00 (NetWeaver 2004s), it is also available for Firefox and Mozilla Browser. For this reason, the Enjoy design continues to be supported for Mozilla and Firefox in Release 6.40 (but only for these browsers, and even then only for this design, and not Tradeshow).
Furthermore, in Release 6.40, there are some Internet Application Components (that is, Web applications that build on the ITS), which continue to be displayed with the "Enjoy" design. Of course, the "Enjoy" design continues to be supported for these applications.
You can use SITSPMON Transaction to monitor the integrated ITS.
Thanks,
Tanuj

Regd Integrated ITS object services

Hi all,
I am using SAP Integrated ITS based on ECC 5.0 system. Everything is working fine except when i access object services in transaction me23n from portal.. In me23n transaction i have generic object service icon . If i click the object service icon in the portal, it is not displaying the object service toolbar and it is only refreshing the page . Could any one help me to resolve this issue.
Regards
Vasu

Thanks Edgar i resolved the issue after applying the correction . Now i am facing another problem when i click on create attachment in menu..the page is hanging with the message "please wait...." but nothing is happening after that...

Solid Edge-SAP integration

Hello,
1. I am having cad files with names, like pump.par, 1234-PUMP.par. In Solid Edge-sap integration there is an option in which we can have the file name as document name when we create a dir. As document numbering is internal or external with only numerical, am I correct in saying for this in Document Type number assignment we would put 'external number range' with user exit and in User Exit design something with help of available Badi's (with some developers help) and then only file names could be passed to DIR names.
2. Also in solid edge-sap integration its written that for different versions of dir, the files below them should have the same name otherwise the links get lost, for example SEP-pump-000-01 has file name pump.par under it and also SEP-pump-000-02 has file name pump.par under it , but we make changes in design
Thanks,
Paddy

Dear Stefan,
Thanks a lot for your reply. The second answer is very useful. It's good to know files names in dir versions would be "version free" in SE-SAP integration.
You lost the first question. I want to use option, 'set DIR name as file name', so if lets say file name is abc.par, the DIR name would be 'abc'. My question is what number range should I define for the document type. I assume 'external number range with user exit' would be used to make this happen and development would be needed,. Am I correct.
Thanks,
Sachin

How to find the integrated ITS version

Hi All,
We have done the kernel upgrade in our environment. I have to find the ITS version as it is part of SAP kernel now.
Kindly suggest.
Regards,
Karthik.R

Hi Karthik,
Check the below link
http://wiki.scn.sap.com/wiki/display/HOME/ITS+FAQs
Also the note 366052 - ITS versioning
Additional comment about the 'SAP-integrated ITS' :
To determine the version of the ITS integrated into the SAP Web AS kernel, choose System -> Status in the SAP GUI. On the dialog window that then appears, choose Additional kernel information and you then receive the information about the used SAP kernel ("kernel release" and "patch level") in the following dialog window. This is the relevant information for the integrated ITS.
Regards,
Rajesh Kumar S

Integrated ITS 6.40 - Connect to SAP R/3 4.6 C

Hi,
here first the tecnical details as required :
SAP-BW 3.5 SP 15
SAP R/3 46C
Web browser IE 6
Integrated ITS release 6.40 Kernel patch level 105
I am trying to establish the ITS connection in order to be able to jump from Web reports to a specific CO transaction in SAP R/3. Given my poor technical knowledge, it is not working but I have already made the following check and settings.
- in SICF, I have activated the service 'WEbgui' following the path SAP/BC/GUI/SAP/ITS.
- I have made sure in the profile of the instance that both parameters 'itsp/enable' & 'em/global_area_MB' were properly maintained.
But it is unclear to me how to maintain the entry in table TWPURLSVR. What I have done so far is the following :
- logical system corresponding to the target client in SAP R/3
- Web server of the BW instance /sap/bc/gui/sap/its/webgui
- Web protocol : HTTP
- GUI start server of the target client in SAP R/3
When trying to make the jump from a Web report, I get the following error message stating :"http://host:port/scripts/wgate/webgui/! call was terminated because corresponding service not available."
Any help would be appreciated (and rewarded)
Thx
Stéphane Beguin

you can call a transaction of BW system using the integrated ITS.
for ex. for Txn SE38 it will be
http://host.domain.com:port/sap/bc/gui/sap/its/webgui/!?~transaction=se38
but from BW system's integrated ITS you cannot call a transaction of your R/3 system (which is on 4.6C)
if you want to call a transaction of R/3 system from your BW query you have to have a standalone ITS installed. (yes separate server).
also check out this link.
http://help.sap.com/saphelp_nw04/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm
Regards
Raja

ALV GRID and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

Hi All,
We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
We are on Basis Patch level 15.
Does anyone have any ideas on how to fix this?
Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
Thank you so much!
-Kevin

Hi,
Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
Thanks!
-Kevin

Reg:SAP & MSP integration

Hi,
1) I am using Window XP,MSP 2007 and ECC6.0 but when i am trying to upload Milestone assigned to summary task in MSP to SAP then uploading is not perform in system.
Can anybody let me know how to create milestone in MSP for WBS and how to upload it in SAP.
2)I am not able to use MSP and SAP integration in Windows 2007.Is there is any reason for that.
With Regards
Rohit Prakash

Hi!
Check this link..
MS Outlook Integration.
MS-outlook intergration with SAP-B1

Log off problem in integrated ITS

Hi,
our cancel button for ending the application with an external ITS works fine and the exitURL which is deposit in the service file will be shown.
But with an integrated ITS it doesn't work. I know that this exitURL doesn't work in an integrated ITS.
So I left a redirect URL in the SICF > ErrorPages > Log Off Page > Redirected URL
but nothing happens after clicking the cancel button. The browser works and works but the old screen is still seen. What's wrong? Why the page will not be redirected to given Url?
Can anybody help me?
This works:
wgateURL(~command="logoff", ~exitURL="http://www.sap.com")
but we need a standard exit like described above and I think the way above should be right.
Thanks, Susanne

This was discussed recently.
check out this thread
Close the IE page on click of a button in the transaction
Regards
Raja

Integrated ITS : Session killed but memory still reserved

Hi,
I'm a basis guy, new to portal technology.
Our users launch webdynpro from EP6 Portal, the HTTP request our SAP ECC6 system (web as kernel 700) with integrated ITS. One of the user session has been lauchned yesterday, and was still running this morning that lead to a memory bottleneck. Because of that no more HTTP user was able to logon to the application server.
The user session has therefore been killed using transaction sm04, now the users ara able to reach again the server.
BUT, in transaction SITSPMON I can see that the memory session has not been entirely released, the ITS session still appear (without hte user name)
same thing in transaction ST02, where 80% of the extended memory is used with ... 3 users connected.
I have already checked sap note Note 742048 (- Integrated ITS, memory requirement in application server), our memory parameters doesn't seem to be the problem (em/global_area_MB =1024 ).
My question : Is there an other way to kill an ITS session ?
How can I retrieve the used memory ?
Any useful help would be highly appreciated.
Best Regards.

Hi,
I'm a basis guy, new to portal technology.
Our users launch webdynpro from EP6 Portal, the HTTP request our SAP ECC6 system (web as kernel 700) with integrated ITS. One of the user session has been lauchned yesterday, and was still running this morning that lead to a memory bottleneck. Because of that no more HTTP user was able to logon to the application server.
The user session has therefore been killed using transaction sm04, now the users ara able to reach again the server.
BUT, in transaction SITSPMON I can see that the memory session has not been entirely released, the ITS session still appear (without hte user name)
same thing in transaction ST02, where 80% of the extended memory is used with ... 3 users connected.
I have already checked sap note Note 742048 (- Integrated ITS, memory requirement in application server), our memory parameters doesn't seem to be the problem (em/global_area_MB =1024 ).
My question : Is there an other way to kill an ITS session ?
How can I retrieve the used memory ?
Any useful help would be highly appreciated.
Best Regards.

Integrated ITS issues in HTML Viewer Control related to applets

We are currently running on integrated ITS - WAS 7.0 kernel 90 at level SAPKB70010. We recently upgraded from a 46C environment that was utilizing external ITS. We also utilize the standard SAP CIC0 transaction (call center interaction center) that is essentially running the webgui service inside of html viewer controls inside of the SAPGUI.
Once we upgraded to the integrated ITS we have lost some functionality. It appears functions like exporting to spreadsheets from ALV grid, for example, no longer work in the CIC0.
Through some investigation, I can see that if I run the webgui service in an IE browser, the ALV grid export functionality will work, and makes use of applets.
If I run the same webgui service in an HTML viewer control (for example, by running thru program RSDEMO_HTML_VIEWER), I can see that the download will not work.
I'm aware the HTML viewer control has limitations, however this functionality worked fine for us when using the External ITS, and is important functionality for our CIC0 transaction. We are using the same version of SAPGUI (640) now we were using before.
Is anyone aware what has changed with Integrated ITS that would make this functionality no longer work in HTML viewer control? or possibly settings that might need adjusted?
Thanks,
Pam Crissman
Pam Crissman

Hi Pam,
I found something on SAP Notes:
Check this:
Note 858959 - ALV export: saving in SAP GUI for HTML as local file
Regards,
Siddhesh

ABORT_MESSAGE_STATE when calling transaction via integrated ITS

Hello experts,
we use ECC 6.0 (and therefore Netweaver 7).
I try to start a customer transaction via integrated ITS on our consolidation system with the following link.
http:// ...   :8080/sap/bc/gui/sap/its/webgui/!?~transaction=ZCO16&sap-client=200
In our dev system all works fine so far. But in consoloidation I get errors showing in the browser after logon:
Error when processing your request
What has happened?
The URL http:// ...   :8080/sap/bc/gui/sap/its/webgui/! was not called due to an error.
Note
The following error text was processed in the system Q01 : System error
The error occurred on the application server asapt02sv1_Q01_00 and in the work process 1 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPMZCO002
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system Q01 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server asapt02sv1_Q01_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server asapt02sv1_Q01_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: IE121 -l: E -s: Q01 -i: asapt02sv1_Q01_00 -w: 1 -d: 20080111 -t: 165033 -v: ABORT_MESSAGE_STATE -e: System error
HTTP 500 - Internal Server Error
SM21 says:
16:37:04 DIA 001 200 IE121   ZCO1           W0 1 ITS, User session terminated
long message:
ocumentation for system log message W0 1 :
he user session has been terminated after an error in the log
onversion from SAPdiag to HTML. Look in the preceding syslog entries to
ind the cause of the error. For more error details, refer to the trace
iles.
16:37:04 DIA 001 200 IE121   ZCO1           D0 1 Transaction Canceled ITS_P 001 ( )
long message:
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
The tracefile of the work process says:
========================================
W Fri Jan 11 16:37:04 2008
W      *** ERROR => julep: PpioCreateParseTree: IRepRetrieve(templates/system/header.html) failed. [w3xxppio.cpp 1184]
W      *** ERROR => julep: PpioCreateHtmlPP: PpioCreateParseTree(templates/system/header.html) failed, rc=0x10c [w3xxppio.cpp 985]
W      *** ERROR => julep: XIntInterpret: PpioCreateHtmlPP(templates/system/header.html) failed, rc=0x10c [w3xxjuce.cpp 529]
W      *** ERROR => xgdk: MsgtBuildHtmlBlock: IntpDoInterpret (templates/system/header.html) failed, rc=0x2101 [w3xxmsgt.c   220]
W      *** WARNING => diag: SemgXGHandleResponse: Returning rc=0xffffffcc [w3xxsemg.cpp 1490]
W      *** ERROR => plugin: XKrnHandleResponse failed rc= -52 [itspxkrn.cpp 764]
W      *** ERROR => plugin: ItspXKrn_HandleResponse failed. 700000840333ba0 rc: 0 [itspxkrn.cpp 391]
W    *** ERROR => ipl_ConvertOut failed rc = 1, send icf error page [itsplxx.c    1526]
M    ***LOG W01=> [itsplxx.c    1527]
W    *** ERROR => ipl_ConvertOut returns 1(ITSPE_FAILURE) [itsplxx.c    1529]
W    *** ERROR => Raise Last error:[1 from: itspxx.cpp :817] [itsplxx.c    1216]
W    *** ERROR => RaiseError(sapdext) ITS_P:01 [itspxx.cpp   817]
==========================================
I don't have any dumps.
Please help. Thanks in advance.
Frank

Hello Ruchit,
> Publishing is done via SE80 but may be it may not be needed. But you can try that out as well.
Please advise. How do I this precisely?
> Try this. Deactivate your SICF completely in consolidation system and then reactivate
> it. After that give this a try.
All services have been activated now (after deactivating first) but I have still the same symptom.
> Also when you are trying to execute this customer transaction just compare the urls you
> are getting in development and consolidation. I guess there is an issue with the
> url you are getting.
I get exact the same URL after (except the hostname of course):
http:// ... 8080/sap/bc/gui/sap/its/webgui/!?sap-system-login-basic_auth=X&sap-client=200&sap-language=EN&%7Etransaction=ZCO16
Regards.
Frank

SAP Integration Kit for Crystal Reports

Hello,
I read Ingo Hilgefort's blog on BusinessObjects and SAP Part 2.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Does the current trial version of crystal reports available from businessobjects.com have this integration kit embedded in it?
If not, where can i find it?
Regards,
Suraj

hi shenoy,
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
see link
http://safari.oreilly.com/0672329174/ch15lev1sec7#X2ludGVybmFsX1RvYz94bWxpZD0wNjcyMzI5MTc0L3BhcnQwMg==
http://diamond.businessobjects.com/node/18962
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
Note
In Crystal Reports, you cannot check the SQL generated using the Show SQL Query option from the Database menu. You can check what Open SQL was generated by using SAP transactions.
The InfoSet driver allows the user to connect to an existing InfoSet, as defined by SAP transaction SQ02. Alternatively, you can use an existing ABAP query, as defined by SAP transaction SQ01. The benefit of this driver is that the user does not need to know where the data is stored or how to join the tables. Another advantage is that any prompts defined in the InfoSet become parameters in Crystal Reports.
Note
To test the InfoSet query, run the InfoSet using your SAP GUI and ensure that it is pulling the required data first before testing it in Crystal Reports.
Reporting off BW Data
When reporting off of BW data, the Business Objects' Integration Kit consists of three drivers that are used to pull data.
The BW Query driver enables the user to connect to a BW query. To enable selection of a query with this driver, Crystal Reports has its own toolbar, as shown in Figure 15.3, and the user needs to select the New Report icon from this toolbar. The user then selects the required BW query, and thus displays a listing of fields available in the query. The user can then create the report using any of those fields. Variables defined in the query automatically become Crystal Reports parameters. After the user has finished building the report, the user saves the report using the BW toolbar. This saves the report to BW, and if the user selects the option to do so, automatically publishes the report to Enterprise.
Figure 15.3. Crystal Reports after the SAP integration kit is loaded. Note the SAP menu and BW toolbar.
[View full size image]
Two new drivers have been added to the XI R2 version of the SAP Integration Kit.
The MDX query driver supports using Crystal Reports to report off either a SAP BW query or a BW Cube.
Furthermore, it adds additional functionality by providing support for
A structure in both the row and column of the BW query
Hierarchy node and hierarchy node variables
Free characteristics in a BW query
The Operational Data Store or ODS driver exposes the ODS tables, so that they look much like the tables of any relational database. However, because of the structure of the objects, it considers them to be like a database stored procedure.
Connecting to the ODS objects is not performed with the SAP toolbar described here, but rather by selecting the driver from the Data Explorer as shown in Chapter 1, "Creating and Designing Basic Reports." After the user has finished building the report, the report can be saved back to BW and published to Business Objects Enterprise by selecting the Automatically Publish to Enterprise check box, as shown in Figure 15.4.
Figure 15.4. The additional options after saving a Crystal Report to SAP BW.
Note
This publishing method requires some setup. Please refer to the Installation documentation for further details.
Note
Both the ODS and MDX drivers require SAP transports to be loaded on the SAP BW system. Please refer to the Installation CD in the Transports folder for further details.
Using OLAP or Web Intelligence to Report off BW Data
Included in the SAP Integration Kit are specific drivers to allow OLAP Intelligence and Web Intelligence to report off of SAP BW.
To connect to a BW cube or query using OLAP Intelligence, open the connection browser and select Add. Select SAP Business Information Warehouse and then proceed to fill in the relevant data, as shown in Figure 15.5.
Figure 15.5. The information required to connect to a BW cube or query from OLAP Intelligence.
[View full size image]
After you are connected, select the query or cube and process to build the report, as described in Chapter 19, "Creating OLAP Intelligence Reports."
Web Intelligence is new to XI R2 and requires that a universe be built on a BW Cube or Query. However, to aid in this process, Designer builds the universe for you. To do this, select SAP from the list of connects and fill out the required information, as displayed in Figure 15.6.
Figure 15.6. The information required to connect to a BW cube or query from Web Intelligence.
[View full size image]
Finish the remainder of the wizard and when you click OK, Designer generates the Universe for you. It may be necessary to move some of the objects around to suit your needs, but when you are finished, export to Business Objects Enterprise.
Note
Only the BW query driver does not require the query be released for external access. The Web Intelligence, OLAP Intelligence, and MDX drivers require the user to release the BW query. To release a query, select the query properties in the BW Query Designer and select the Extended Tab and then check Allow External Access to This Query.
Viewing the Reports
Your SAP reports can be viewed either via the SAP integration kit's InfoView or via SAP Enterprise Portal 6. The integration kit provides a number of sample iViews that can be imported by a portal administrator. These include
Folder iView The folders a user has access to are displayed, and from here a user can run her reports.
Alert iView Shows all the alerts that have been triggered by Crystal Reports. The user can then click on the report to view the report. The creation of alerts is defined in Chapter 11, "Using Record Selections and Alerts for Interactive Reporting."
Thumbnail iView This iView displays the Crystal Report as a thumbnail of the report. The user can then click on the thumbnail to run the report.
Note
These are sample iViews. The organization can create its own iViews via the provided SDK.
BusinessObjects InfoView for SAP is a unique version of InfoView designed for integration with SAP BW systems. This integration includes features such as the ability to log on to InfoView using your SAP username and password. Related to authentication is the ability to access your roles and the Crystal Reports saved to these roles. The roles are defined in Enterprise as folders. The user can also schedule reports in the different languages loaded into SAP BW. This creates an instance for each language.
for remainig info pls use the link
http://book.soundonair.ru/sams/ch15lev1sec7.html
very good link for sap integartion kit
thanks
karthik
reward me points if the above info is usefull.
dont forget

To logoff from integrated ITS (NW 7.0)

Hello all:
Is there an equivalent url for the integrated ITS (running on NW 7.0) for the following command that works for standalone ITS (6.20)?
https://<host>/scripts/wgate?~command=logoff
In standalone ITS, the above command was able to remove the logon information from user's browser and the sessions in the backend R/3.
Thanks in advance.
Regards,
Danny.

Hi Danny,
Check out SAP note 959417.
Cheers,
Julius

Integrated ITS: multiple sessions and locking issue

We are upgrading to ECC 6.0 from 4.6C and have Integrated ITS turned on. We have built a custom PZM3 as one entry and exit point for our ESS services. But we have issues with session management when navigating between some services like PZ14 and PZ02. The PZ14 session and the corresponding lock are not released upon going to the PZ02 service directly. But this happens for only some services. If you navigate between PZ02 and PZ12 it works fine. I followed the instructions of note# 959417, but it didn't work. Not only it is causing locking issues, but also memory usage issues as multiple user sessions are being created on the server. I did check some of posts similar to this one, but the issue still persists.
Our WAS release: 7.00; ABAP support package: SAPKB70009; Patch level: 75.
I would appreciate if anyone could shed some light on this issue. Thank you for your time and consideration.
Kshitij

Our Basis admin found out that using a parameter ~DISCONNECTONCLOSE = 1 would resolve most of this issues -- and it did. But now we are having issues with some users having popup blockers turned on. We referred to SAP notes 892250/596698-- followed it -- implemented it-- but some users
still have issues -- like today while working from home via VPN, I am having issues with session management. But working from office yesterday,
the sessions worked just fine.

Reg SAP Integrated ITS in WAS

Similar Messages

Maybe you are looking for