Reg SAP PI Certication TechEd 2008

Hi,
I am Planning to take PI7.0 Certification 2008.
I have Suser ID with me .
What else do I require apart from this.
Is NOC(no objection certificatte) from the present compant is Must for taking the examination as there is some problem in this.
If the NOC is must ,can u please let me know the other ways to write the certification.
Thanks,
SrinivasaPhani

Hi,
    The Letter from ur employer stating that u r working for that company for more than 1 yr is require, without that u cannot attend the certification. Otherwise u can write a certification at any time later once u complete 1 yr.
Check the below links-->
http://www.sap.com/services/education/certification/teched_2008_bangalore.epx
details about TECHedu20192008
http://www.sap.com/services/education/certification/teched_2008_bangalore_schedule.epx
Thanks & Regards,
Bharath.

Similar Messages

  • ABAP certification at SAP Teched 2008

    Hello ABAP gurus,
    I wish to appear for the SAP ABAP Development Consultant certification (C_TAW12_04) exam at the Teched 2008, proposed at Bangalore.
    I have been trained by SAP Academy in October-November 2006,at Pune.
    However, after browsing through SAP sites and through colleagues , I came to know that the Course material has been revised.
    Am I eligible for ABAP Certification at this Teched then?
    My SAP experience is 1year 7 months,whereas my overall work experience is 2 years and 2 months.
    Please clarify .
    Thanks in advance.

    hi himanshu....
    yes ur eligible, but since the cource contents hav changed, u should make sure u are comfortable with the new curriculam contents before appearing for the test. it is adviced not to appear if ur not damn sure .
    all the best to u and do reward and close the query.

  • SAP TechEd 2008 : Eligibility : min 1yr with current employer necessary?

    Hi All,
    I'm working in SAP for almost 3 & half year now.
    I've recently switched over my job. I have been with my current employer from past 3/4 months.
    Can I be eligible to apply for SAP TechEd 2008, Bangalore? Is there any eligibility criteria for SAP TechEd 2008 that I need to be with my current employer for atleast a year?
    Could you also please post the link where I can see this eligibility criteria on SAP site.
    Thanks,
    Pallavi

    Hi PK,
    These condition are applicable for TechEd only.
    SAP TECHED 2008 BANGALORE: ELIGIBILITY REQUIREMENTS
    Certification exams will be conducted onsite at the SAP TechEd 2008 Bangalore venue on November 14 and 15, 2008.
    Venue
    Karnataka Trade Promotion Organization
    Trade Centre Bangalore
    Plot No. 121, Export Promotion Industrial Park
    Whitefield, Bangalore - 560048
    Landmark: Adjacent to SAP Labs and Pop Genesis Software
    Eligibility
    In order to qualify for a certification exam you must be:
    u2022     "Full Conference" registrant with fully paid status on or before October 31, 2008.
    u2022     A registered SAP consultant (SAP employee, partner, or independent), or an SAP Customer Core Competency Center team member, or an employee of an SAP partner or customer.
    u2022     An S-User ID holder u2013 specifics as to S-User ID information are listed at the bottom of this document or an SAP Employee with a D or I number.
    In addition, the following eligibility requirements exist for certification candidates:
    Partners and Customers
    u2022     Participants must complete the relevant academy courses with SAP Education or an SAP Education Partner to qualify to take the certification exams.
    u2022     Candidates can appear for re-certification with a copy of score sheet, provided the exam is in the offering.
    Or all of the below:
    u2022     Must have served current employer for at least 12 months prior to the exam date.
    u2022     For associate level certification exams, a minimum one to three years of SAP implementation experience with a minimum of six months experience in the module and version in which the candidates appears for certification.
    u2022     For professional level certification exams, a minimum of three to seven years of SAP implementation experience with minimum of 12 months in the module and six months in the version in which the candidates appears for certification.
    u2022     Your present employer should be a customer or partner of SAP.
    Participant is responsible to submit proof of the above.
    Individuals
    u2022     Participants must complete the relevant academy courses with SAP Education or SAP Education partners to qualify to take the certification exams.
    Participant is responsible to submit proof of the above.
    u2022     Candidates can appear for re-certification with a copy of score sheet, provided the exam is in the offering.
    Amit

  • Announcement KM on Sap Teched 2008 Las Vegas

    Hi,
    I was told that at the Sap Teched 2008 in Las Vegas SAP has made the announcement that SAP will phase out Knowlegde Management.
    Does anybody knows where I can more information of this announcement ? Has anybody attend this presentation at Sap Teched Las Vegas ?
    We has the intention to start with the implementation of KM so this information is very important for us.
    I am looking for the "Sap announcements made at las vegas" but I don't find them.
    So if anybody can help me ...
    Kind Regards
    Pascale Thys

    Hi Pascale,
    I'm not sure where you got your information.  No such announcement was made at TechEd.  KM is alive and well.  It is the basis for a number of Netweaver capabilities like Web Page Composer and Collaboration.
    It was announced that the collaboration portal capabilities that we due to be rolled out with the enhancement pack 1 ramp-up this month has been delayed.  You can find more about this in an article on SDN here https://www.sdn.sap.com/irj/sdn/nw-portalandcollaboration.
    There is no reason not to go ahead with your KM implementation.
    Good Luck,
    John

  • Can a SAP-MM functional consultant register for TechEd 2008 ?

    Hi
    Can anyone clearly explain what is TechEd ??
    And can a SAP-MM functional consultant register for that and is there any related Workshop/Lecture in this TechEd ??
    If so how to know the list of Workshops/Lectures.
    cheers
    MaruthiRam

    Hi Maruthi,
    TechED is the annual event organizaed by SAP/SDN team. Its basically the get together for SAP folks who wants to share their knowledge or want to gather knowledge on the latest happening. Check thsi for more info on [TechEd|http://www.sapteched.com/india/]
    Yes you can register for the TechED.
    I do not think there is any specific session on SAP-MM, however you can have a check on .[list of sessions at TechEd 2008|http://www.sapteched.com/india/edu_sessions/tracks.htm]
    Regards,
    Subhash

  • SAP TechEd - 2008

    Hi Everyone,
    I know there are many aspirants for SAP TechEd - 2008 who would like to take the certification exam on various topics.
    For those who would wish to know the details on what are the topics covered and the materials they have to refer etc....
    the following link will provide you the details about all the certification exams happening for SAP TechEd - 2008
    [http://www.sap.com/services/education/certification/certroles/technology.epx]
    For Security =>
    http://www.sap.com/services/education/certification/certroles/certificationrole.epx?context=[[ROLE_P_ADM_SEC_70_CER]]|
    I wish good luck to all for the exams!!
    Regards,
    Srihari

    Moved to the TechEd Forum

  • TechEd 2008 India is worthful for Beginner ?

    Hi Experts,
    I am new in SAP ABAP and want to join the TechED 2008 in india. But As I have just switch my career to SAP ABAP , so I am wondering whether it is really helpful for me to take part in it.
    I am more concern about the OOPS concept , so When I am trying to search the sessions which is listed for 2008 techED, I am not able to find any topic related to OOPS.
    Please kindly give me advise which course id more suitable for me as beginner.
    Thanks in Advance .

    Hi,
    Yes it will be Useful for you definitly.
    Because you are Beginning of the SAP career ,in TechEd Session you will get so many sessions on diferent SAP Technologys.
    see the below link for the Sessions which will be Conducted in the TechEd.
    http://www.sapteched.com/india/
    Govindu

  • Areas for Certification in Teched 2008 Bangalore

    Hi,
    What are the areas for certification for SAP Teched 2008 Bangalore... especially in ABAP and EP...??
    Thanks and Regards,
    Sayan Ghosh

    Hi Sayan,
    I think till now it is not decided that which all the exams are going to be in SAP TechED '08 Bangalore. SAP might update it after few months with the list of exam codes.
    You can see the TechED '08 update on this website:
    http://www.sapteched.com/india/home.htm
    To get the regular update you can also join the mailing list.
    Regards,
    Subhasha

  • IView not found: com.sap.pct.mdm.tech.systems.MDMSystemWizard

    Hello Experts!
    I've installed MDM 5.5 SP6 along with the portal content that came from the same download. The portal content files I installed are listed below.
    BPMDMAPPLI06_0.sca
    BPMDMTECHN06_0.sca
    MDM_WEB_UI550.sca
    MDMJAVAAPI06_0.sca
    When I try to get a new MDM system I get the exception below. I've looked and searched the portal content and this iView (com.sap.pct.mdm.tech.systems.MDMSystemWizard) does indeed appear to be missing. Is there something else I need to install? The SCA files all deployed without errors.
    Steps to recreate this error:
    System Administration => System Configuration => Portal Content => (landscape directory)
      => Right-Click => New System (from template) => choose MDM System template => Next
    Thanks,
    John
    [EXCEPTION]
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: iView not found: com.sap.pct.mdm.tech.systems.MDMSystemWizard
            at com.sapportals.portal.prt.deployment.DeploymentManager.getPropertyContentProvider(DeploymentManager.java:1937)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:222)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
            at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
            at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)

    Restarting the J2EE engine resolved this problem.

  • Write a SAP Crystal Solutions (Xcelsius 2008) book for Packt Publishing

    Hi,
    I am an author recruiter at Packt Publishing (www.packtpub.com). We publish computer-related books on a wide variety of IT topics.
    We are planning to publish a new book on SAP Crystal Solutions (Xcelsius 2008).I am looking out for some potential Co-authors to write this book, who are an expert at it and also, a book can be a way to raise one's profile in their work environment.
    Title: SAP Crystal Solutions Cookbook
    Planned to be a 350 pages book, targeted at Xcelsius Developers who have a good command and knowledge of creating dashboards, but are not advanced users .A book to help users accomplish specific dashboarding tasks with Xcelsius 2008 Engage and Present.
    To give you an idea about the way things work at Packt:
    The editorial team at Packt works with the author through the project.
    We pay a royalty of 16% and an advance against it.
    The marketing team at Packt ensures that the book is well promoted.
    Could you please let me know if you find it interesting to Co - author this book?
    Thanks,
    Snehman Kohli
    Author Relationship Executive
    Packt Publishing
    www.PacktPub.com
    Interested in becoming an author? Visit http://authors.packtpub.com for all the information you need about writing for Packt.

    Hi,
    when will IE8 be supprted with Xcelsuis 2008? I am having the problem that no new Connections (e.g. QaaWS) can be created... Thanks for a quick answer.
    Best regards,
    Simon.

  • SAP Crystal Report Server 2008 SP4

    Where can I find SAP Crystal Report Server 2008 SP4 to download?

    It is 32bit but runs on 64bit (eg. Windows) also as long as the required 32bit libraries are available on the machine.
    Regards,
    Stratos

  • Announcement of KM at Sap Teched 2008 in Las Vegas ?

    So yes,
    Do you know anything about an announcement of SAP that they will phase out KM ?
    If yes, have you any information for me ?
    Kind Regards
    Pascale

    Just to highlight the link - registration for the event is at
    http://www.ibm.com/events/systemiteched

  • Reg:BI Certification in TechEd

    Hi friends,
    I have one doubt regarding the BI certification..I am actually working for a company which is not a partner or customer of SAP.Is it mandatory that you should work for a company which is partner or customer of SAP for doing the certification in TechEd.

    Hello,
    In order to qualify for the discount associated with the certifications at TechEd you must meet all of the qualifications in 'eligibility' section of the registration process found at http://www.sapteched.com/india/reg/certificationExams2.htm.
    This includes currently working for an SAP Partner.
    Thank you,
    Richard

  • Error connecting to the SAP SRV on Windows 2008 Server platform

    Hi All
    We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
    When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
    We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
    After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
    *Connection failed:
    SQLState:'08001'
    SQl Server error:10060
    [Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
    Connectioin failed:
    SQLState:'HYT00'
    SQL Server Error:0
    [Microsoft][SQL Native Client]Login timeout expired
    Connection failed:
    SQLState:'08001'
    SQL Server Error: 10060
    [Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
    Please help as most user who need access can't login and they are the main users.
    rgds,
    Bongani Dlamini

    Hi Eric,
    yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
    we tried to create the key but it says access is denied.
    Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
    We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
    I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
    Thanks & Regards,
    Prabhu Reddy.

  • Not able to see all the SAP tables from CR 2008

    Hi All,
    1)I am not able to see all the SAP database tables(DEV server) from Database expert menu in CR 2008. Only tables those start with alphabet letters upto A & B are visible. I checked the database connection>right click>options> found no filters as well.
    We are using the CR 2008 trial version with SAP ECC.
    2) When i am trying with Production Server of SAP ECC, I am not able to logon to the SAP from CR 2008. It is giving error message
    as : LOGON FAILED : User USER1 has no RFC AUTHORIZATION for function group SYST
    Please help me to resolve these. Thanks in advance.

    Thank you very much ingo.
    You helped me a lot.
    One more question, when I am trying for SAP database connections say for ex: 10.57.410.70, again and again some times the connection is getting saved in my connections with as new versions/variants like
    10.57.410.70_1 or so. How to overcome this.
    Thanks in advance ingo
    Badari

Maybe you are looking for