REG : SAP-TPM Reports

hi all,
I am SAP-BI consultant.I want to do the SAP-CRM extractions and Analytical reports for Claims management,Funds management and marketing.Kindly,share your knowledge regarding the Standard Analytical Reports and standard Cubes for the TPM.
regards,
raghavendra.

http://help.sap.com/saphelp_bic706sp01/helpdata/en/07/1d4b7bd0bc447aa7fd260ee1c65c30/frameset.htm
with the help of this link we can find the analytical reports and Infocubes related to TPO.

Similar Messages

REG : BI Analytical reports for SAP-TPM.

hi all,
I am BI consultant.If any one is aware of Standard Analytical BI reports related to SAP-TPM..Kindly,share the information.Thanks in advance..
regards,
raghavendra.

http://help.sap.com/saphelp_bic706sp01/helpdata/en/07/1d4b7bd0bc447aa7fd260ee1c65c30/frameset.htm
with the help of this link we can able to find the Analytical and Infocubes for TPO.

Reg: Parameters to add SAP Standard REport

HI all,
I want to add extra parameters to sap standard report. how to add it.
regards
JK rao

Hi Janardhan,
As SAP recommended, you should not change the standard report, if u want to get support for future versions.
its better to create a new report by copying old one and adding new field as u want.
Consult your ABAPER regarding this.
I hope this will solve ur problem
Thank you,
Purnachandra RM

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

Cannot Install SAP Crystal Reports 2011 on 64-bit Win 7

I am trying to install the 30-Day Trial of SAP Crystal reports 2011 on a Windows 7 64-bit pc and at the end of the installation, I receive the two errors below.
I made sure I clicked 'Ran as Administrator' and under properties under the Compatibility Tab, I selected Windows 7.
I also made sure my antivirus software was disabled.
1st Error - It was a pop up after the installation said successful.
Missing installdir reg key for installiverse, required for uninstall. Key: SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Installer\aurora Value: Path
2nd Error - It was another pop up right after I selected OK on the 1st error pop up.
Runtime Error!
Program: C:\Users\Ken Muhr\Desktop\River Valley Recycling\Crystal Reports -...
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
And the box name is called, "Microsoft Visual C++ Runtime Library
After I click OK to clear this 2nd error pop up box, I go to my programs and it is not there to use. I don't understand why. Has anyone experienced this?
Thanks in advance!

Hello,
Have a look in the install log file, it is under this tree:
C:\Program Files (x86)\SAP BusinessObjects
Anything in the install log? You can open it with notepad.
Also have a look at this post: SAP Crystal Reports 2011: Error INS00140 and other install errors
And you also need 2.0 Framework as well as MS VS 2005 C++ Security installed.
Interesting name for a PC...
Thanks
Don
Edited by: Don Williams on Aug 19, 2011 12:57 PM

Excel Download of a Web SAP BW Report asks userid and password.please help

Dear BW folks,
Issue: When I run a specific SAP BW Report from Web and download the same into excel & csv.
When I open the excel file downloaded, it asks me user name and password to enter. csv file downloaded doesn't ask.
The report has 0cust_sales hierarchy and SBU hierarchy.
Is there any thing to do with these hierarchies that the excel download is asking user name and password?
Please help me out!!!!! This report needs to be downloaded into excel sent to my manager.....
Regards
Pavan

Hi Pavan
It is possible,please refer the below link
Report execution without prompting user id
Providing un-secured access to a web report.
Also, for the time being, you can run the query and save a workbook and sent across
These will resolve the issue
Thanks
Pavan Agarwal

SAP BI reports on mobile devices

Hi experts
We need have some business intelligence (SAP BI) reports and metrics on our mobile devices (BlackBerry, Iphone, Ipad). For example: The mobile'users should enter a product ID and the report show the metrics relate with it availables in SAP BI.
We have BusinessObject products and we know about BOBJ tools to design our solution to mobile devices.
Can we use BO Mobile and BO Explorer simultaneously to show the reports on Blackberry and Mac Devices?
With BOBJ tools can we do a interactive report (to enter product key) ?
Thanks for your help.
Osmy

Hi Osmy,
With the latest BI4.0, you will be able to use BI Reports on Blackberry (and nokia) devices (this was also available in XI3.x releases) . There is no iphone support yet - which maybe coming shortly in later releases.
As for Explorer, i* apps are already available - but not for blackberry as far as i know
You may already be able to run interactive (prompted) reports on blackberry. Below is a link on design best practices for reports on mobile
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_mobile_bi_rep_design_en.pdf
hope this helps,
Shiva

SAP QUERY report for vendor line items

Hi
I have created a SAP QUERY report for vendor line items with fields vendor no.,vendor name,amount,company code and period.But there is one line item i donot know from wher system is getting it picked with is not in that vedor account,when i compare with fbl1n.I checked the document number too...the same doc number is twice in my query report.One with correct amount and another with wrong one.How do i chk.Where did i go wrong in creating query.I used logical database KDF.
Please advise.

i chked...how do we get the amount displayed in query...it just displays amount no debit credit symbol... i have selected BSEG-DMBTR field but no -/+ sign,how is it done in query,please suggest.

Sap standard report for delivery document block.

Hi,
We want to block delivery document for further processing that picking and PGI.
For that we are looking for sap standard report if available so we could provide it to client.
so we need
SAP standard report for blocked delivery document.

Hi,
As far as my understanding there is no such report but you can try with report MATERIAL WHERE USED LIST
Please find t-code for this as due to system unavailable i am not mentioning t-code for same
kapil

SAP standard Report-PO, delivery Note, Bill of lading,Header txt,GR/GI slip

Dear Firends,
Kindly tell me the SAP standard Report which give the details of
Po number, delivery Note, Bill of lading, Header text and GR/GI slip no.
Thanks in advance.
Regards,
william

Hi,
You can get all these fields in MB51 report by selecting the relavant fields in the selection variant. If any of the required fields are not available than you can add those in img -going tothe Inv Mgt-Reporting - Define field selection for material document list.
Dhruba

Does SAP have report display the history of dunning

Dear Expert,
Would like to seek for your help,Does SAP have report display the history of dunning for AR module and what are the T-code and report?
Please help.
Regards,
KH

Hi
Dunning status is updated in customer master,you can get the required data from Table LFB5
hope this will help to some extent
Thanks
Kameshwar Rao

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Unable to change language for SAP BW Report Iview

Dear all
We are currently rolling out BW Web Templates can be displayed in both EN and MS languages. The language can be changed via the URL that we display, e.g.
For English Language:
http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=EN&cmd=ldoc&template_id=ZTEST
For Malay Language :
http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=7&cmd=ldoc&template_id=ZTEST
We have published these templates into Ent. Portal 6 using SAP BW Report Iview, but unfortunately we cannot view the report in the Malay language (SAP-LANGUAGE=7), even though we have inserted the command SAP-LANGUAGE=7 in the SAP BW Report Iview query string. All the reports, although defaulted to SAP-LANGUAGE=7 displays in English. We also tried to set the language settings for the Iview, but there are no language 7 or MS in the Iview. It can only be defaulted to the Portals language, which is English.
Note that the reports can be viewed in the different languages if we using the URL separately outside of Portal, and also within BW Bex Analyzer itself. Only the Portal doesnt allow us to view the reports in MS language.
Can someone help us on this matter? All helps really appreciated. Thanks a lot.

Hi Chris,
That's a bit odd indeed. If I understand your question correctly, you do get the BW reports in the correct language (either English or Malay) using the url's in your post but not when using them within a standard BW report iView?
The language setting for the iView has, unfortunately, nothing to do with the language for the content itself but can you tell me what the requested URL is for both Reports?
The BW Report iView is based on the Application Integration Component that generates the URL based on the paramaters you provide in the BW report iView.The following template is being used: <iView[PORTAl_URL]>?System=<System[url_Encode]>&Report=<Report>&DynamicParameter=<DynamicParameter[url_Encode]>. I could be that the generation of the URL fails due to the 7 (don't know why, just a gut feeling because it's the only thing that's different between those urls). You could try to use create an iView based on the Application Integrator instead (some more control over the URL template) but first you need to check whether the URL generated by the iView is correct.
Cheers!
Frodo
P.S: Award points if you find this useful

Issue with SAP BW Report Iview

Hi,
The issue stands with the context menu(right click menu)
I have created a BI Query and generated a BW Report with the Web Designer Wizard.
When I run the generated URL it is working fine, with the context menu also working perfectly.
However when I use that report in SAP BW Report Iview, the report gets opened perfectly but the context menu is taking me to a new page with those options.
As of now i do not know of any setting for context menu specially.
If anyone can help me or if anyone has encountered this error before, pl. let me know the solution.

Atul -- i am running into simillar issue. Please let me know if you found a solution for this.
Hi all -
When i create a BW Report iView 7.x in EP 6.0, the second level context menu doesn't appear for the template. Please let me know if this can be fixed.
Thanks
PR

Difference: SAP BW Report iview - Query iView - URL iView

Hi,
I want to show BW reports on the portal. Can anybody suggest me the different ways of doing it ? And also let me know about checklist of steps that need to be performed.
Can anybody tell me the difference between showing BW reports through URL iviews, showing reports through Query iView and showing reports through SAP BW Report iView ?
Which one can i use for showing BW reports taking into consideration the implementation of SSO between the two? I tried the URL iView (using the Web URL of reports generated by BW) but it asks for Username/password. Is that the problem with SSO. How can i check if SSO parameters have been set or not. I have imported the verify.der to BW System and added that to ACL. Is there anything else which is required?
Thanks in advance.
Rgds,
MA

Hi Manoj,
I feel BW report iview will solve your problem. You can create a query sting in BW query designer and give the same in BW query string text area while creating BW report iview.
In the case of an url iview you are just giving a URL link of the BW report (this will ask for username/password).
But, in the case of a BW report iview you can view the required query as an iview (user mapping can be successfully done in this case) You should give fully qualified domain name in Was server option while creating the system.
While using the logon ticket Login id of both the system (ie BW and Portal) should be the same.
Refer the link for SSO using logon ticket)
User Mapping-based Single Sign On
Regards,
Vinod

REG : SAP-TPM Reports

Similar Messages

Maybe you are looking for