Reg : Screen Flow and Progress States /Progress Bar

Hi All,
I've used 'Screen Flows' for the user to navigate to different screens based on the user input.
By doing so, I'm not been able to use Progress Stages or Progress Bar features :(
If i remove the screen flow, then Progress Stages/ Progress Bar shows up.
But as per the screen order, it shows up all the screens, even if I don't want to display it to the user on certain conditions.
I'm using OPA 10.4.
How do i display the Progress Stages/ Progress Bar ,using the screen flow..
Any help would be greatly appreciated
Regards,
Kumar

Only screen orders support progress stages. Screen flows do not.
The recommended approach is to organize the screens into folders. It is only the top-level (screens or folders) that are then shown as the stages.
Davin.

Similar Messages

I get a white screen with apple logo and progress bar on my imac mavericks

I get a white screen with apple logo and progress bar ,then computer shuts down
when I turn my imac back on same thing happens,every time same thing
pprogress bar only goes half way then computer shut down
is there a solution ?
if not is there a way to at least salvage some files and docs?
i Have the latest imac 27

Thanks I tried it but after I repaired my disk via disk utility at start up, it told me that
my disk can't be repaired and to try to back up my files so I can format it
but is there to back up my files?
also what I get is white screen with the progress bar not grey

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
also use the Command-L to view logs during installation

Why is my Snow Leopard 10.6.8 suddenly giving me a gray screen and progress bar after I've turned it on? The progress bar takes 4-5 minutes to complete then signing on with my password and all other operations are normal. Solution? Many thanks.

Why is my Snow Leopard 10.6.8 suddenly giving me a gray screen and progress bar after I've turned it on? The progress bar takes 4-5 minutes to complete then signing on with my password and all other operations are normal. Solution? Many thanks.

It's starting in safe mode > http://support.apple.com/kb/HT1564
First of all, do a PRAM reset. If it doesn't help, open Terminal and type:
sudo nvram boot-args=""

HT4623 My iphone had an error while updating and is now locked up on the apple screen with the progress bar

Itunes was updating my phone from 6.01 to 6.1 and it came up with an error. I closed the error not thinking about it and now my phone is locked up on the apple screen with the progress bar on it.

hi i tried to update my iphone 3gs from ios 4.1 to 6.1.2, while doing the same i got an error message (-5000) which i ignored an continued. it was almost about to complete while my itunes is not able to detect the iphone kindly help.

IPad 2 froze while updating. Apple and progress bar on screen. Reboot did not work. Help?

iiPad 2 froze while updating. Apple icon and progress bar on screen. Reboot did not work

Try reset iPad and continue with update.
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.

My ipad has stopped updating apps. It doesn't even ask for password, it just oges to the apps screen showing empty progress bars. I've re-synced account and restarted but with no luck. Other than deleting the apps is there anyway around this?

My ipad has stopped updating apps. It doesn't even ask for password, it just oges to the apps screen showing empty progress bars. I've re-synced account and restarted but with no luck. Other than deleting the apps is there anyway around this?

OK. I will work backwards.
You certainly don't want to have to delete apps every time that they need an update, for any number of reasons. Losing data first and foremost would be a drag, but the overall hassle would be absurd. All things being equal, you should be able to update apps in the future after you delete them and reinstall them. I delete and reinstall apps all the time and I am also able to update them when updates are available for the apps. I just wanted to know if you had any success in any fashion installing apps.
Resyncing/refreshing the Apple ID/iTunes account wouldn't seem to be the issue either if you can download apps or other content from the iStores. Your ID is being accepted.
That leaves us with I'm not sure what. But I think I would try this trick fix and see if it helps.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.

After a reset of settings on IPad2 it turns "on" but i only get to the logo screen with the progress bar under it. so it turns on to logo then to progress bar screen then off. and repeats over and over

Well as I said in the "question", I did a reset of the settings on my IPad2. however when it powered back on from resetting. it lets the the logo screen with the progress bar under it. The progress bar gets about 1/4 of an inch from the left then stops. After a few mins Ipad shuts off then turns on to the logo screen, then goes to the logo/progress bar screen, does whats said above, then off. That cycle just repeats over and over. Any help with this would be appreciated.

Recovery Mode Step by Step
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
On Computer
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. iPad Recovery Mode on computer screen
8. Select "Restore iPad"...
9. Select "Restore and Update"
10. Extracting Software.
11. Preparing iPad for restore.
12. Waiting for iPad.
13. Verifying iPad restore...
14.Restoring iPad software.
15. Verifying iPad software.
16. Verifying iPad Restore...
17. Restoring iPad firmware...
18. Your iPad is restored to factory settings; keep iPad connected to computer
19. Activate iPad
20. Enter Apple ID and Password
21. Continue
22. Welcome to Your New iPad
(a) Set up as new iPad (b) Restore from this backup (select from list of backups)
23. Restore from this backup
24. Continue
25. Restoring iPad from backup
26. The settings of your iPad have been restore; keep iPad connected to computer
27. Syncing iPad (Step 1 to 5)
28. Preparing apps to sync
29. Copying 1 of 9
30. Sync apps, movies and music to iPad
31. Finishing syncing
32. Eject iPad

Stuck on start up screen, little wheel turning and progress bar hasnt moved. What can i do?

Stuck on start up screen, little wheel turning and progress bar hasn't move
Help
Thank you!

Useful article here on the causes of the Spinning Beach Ball and how to troubleshoot it:
http://www.computerworld.com/s/article/9177479/Troubleshoot_the_spinning_beach_b all?taxonomyId=89&pageNumber=1
and also this:
http://www.thexlab.com/faqs/sbbod.html

I have an iMac that won't boot up. Chimes, Gray screen w/ apple icon, spinning gear and progress bar at bottom, about 20 sec then shuts off.

I have an iMac that won't boot up. Chimes, Gray screen w/ apple icon, spinning gear and progress bar at bottom, about 20 sec then shuts off.
Please Help

The internal drive is malfunctioning. What backups do you have?

Boot continues to fail - gray screen apple logo progress bar...

I have a mid-2012 MBP. I upgraded to Yosemite. Things were working well. Laptop wasn't used for a week - sleep mode was in use and battery drained. Upon boot-up, progress bar took longer than usual, and after 15 minutes or so it inched its way to the halfway point and finally got to my desktop. Sleep mode is great and I kept the battery charged and didn't let it drain. I needed to do a restart from some updates, but restarting took forever again. I booted off my usb3 yosemite installer and ran disk utility to repair permissions and repair disk. Both found problems and the repair to the disk said I needed to backup any files and start over.
So I got a smaller SSD and installed Yosemite on there, and did a migration to the new SSD. Everything seemed great and snappy for a few days, but once again, after using it in sleep mode for those few days, now it takes forever to start up. I rarely ever restart the Mac, it's awesome. But, the SSD was too small for all my iTunes backups and apps - so I got a 512GB SSD and decided to start over. Once again I installed 10.10 and migrated my data, this time from my time machine backup (few days old). It worked well for one day. ONE DAY. And then it wouldn't even boot. It was slow once, then the next time the stupid progress bar makes it 1/3rd of the way and just quits there. Disk utility finds no errors now, but it won't boot up.
The screen dims, the cursor appears, but the screen with the progress bar remains for about an hour until it brings up a screen full of text stating startup wasn't successful in a dozen languages and then it reboots. Over and over it goes.
When I boot off the usb install, the same progress happens, 1/3rd of the progress bar fills, screen dims, cursor appears, but eventually it turns into the spinning rainbow and the progress bar finishes. I never make it to the rainbow part.
I have reset PRAM as well... Tried different Apple certified RAM. Not sure what steps to do next, so I'm reinstalling Yosemite as I type this.
The 512GB SSD and the smaller SSD were both used in windows machines for at least 6 months prior to use in the Mac, so I'm positive they are good drives. Now I'm not sure if my original HD was even defective or not. Does anyone have any suggestions of things to try or what the problem might be? TIA.

If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.

HT4623 My iphone is frozen with the apple icon and progress bar at 5% cannot update

My iphone4 is frozen with the apple icon and progress bar at 5% cannot update

Same issues here.
iPhone 5 was fine until I restarted the device... now the screen flickers on and off (with the white Apple logo
and frozen progress bar overlayed on the screen).
When I try to restore, I get a "-1" error.
Well I just looked over at the screen, and everything is now fine. No flickering, no logo... the screen looks normal.
Hmmm...

Help needed please, with Iphone stuck with apple picture and progress bar after software update attempted

Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help

ljm17 wrote:
...This keeps happening, everytime I do this type of update, I...
Then you should know what you need to do... If you don't remember...
See Here > http://support.apple.com/kb/HT1808

TS3694 hi i recently updated into ios 7.0.4 now i want to fully restore my ipad to resell but when i restore it it got stuck with apple logo and progress bar with 45% completed as firware file is downloaded using ipad 4 wifi itunes 11.3.8

hi i rescently updated my ipad 4 in ios 7.0.4 and for resell purpose i want to restore my ipad via itunes but it got stuck at apple logo and progress bar of 45% completed i tried it 50 times but it stuck on that exact point for hours i cant able to restore it and had no errors it just like freezes at one point i also uses dfu mode but got stuck at same problem using windows 7 32 bits itunes 11.3.8 ipad 4 wifi please help

My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
Once I completed both restores, the sync with iTunes worked fine.

Splash Screen with a progress bar at the bottom

Hi,
I want to display a splash screen with the progress bar at the bottom just like eclipse , limewire etc
Take a look at the image below.
[http://imageupload.com/out.php/i138889_splashScreen.png]
Can anybody tell me how to achieve this type of splash screen?
Thnx in advance.

Search Google.
This is one of the results: [Splash screen avec progress Bar|http://www.labo-sun.com/resource-fr-codesamples-1126-0-java-gui-splash-screen-avec-progress-bar.htm]

Reg : Screen Flow and Progress States /Progress Bar

Similar Messages

Maybe you are looking for