Reg Significance of Field CLUSTD in MSTD TAble.

hi,
pls let me know the significance of the field CLUSTD which is of type LRAW and length 2886
in MSTD TAble.
Thanks in advance

Hi,
This CLUSTD field stored the data as long raw data, and as such can not be displayed directly from SE16.
And you can only store the data using EXPORT ... TO DATABASE or get the data back using IMPORT ... TO DATABASE.
Regards,
Lim...

Similar Messages

Significant of key field in Info cube table

Hi,
what is significant of key field in Info cube table?
Best regards,
dushyant.

hi ,
key figures are very important in tables, when it is in cube it act as dimensions
for the reporting purpose see this scenario
the table has following fields
student no
student name
student attendance
student mark
in this scenario when we want report according to student no its normal we would get, but when we want according to attendance,marks we dont get report according to attendance and mark, so we put all those fields in key fields.
So we could say that Key fields are the dimensions and according to this we get reports
thank yu

Read LRAW field CLUSTD of table PCL2

Hi All,
I want to read LRAW field CLUSTD of table PCL2 .
Pls suggest me how to read it.
Regards,
Anuj

thanks,
But like STXL table for read LRAW data we use READ_TEXT fm.Is there also any FM by using this we can read PCL2 lraw data.
regards,

How to find out the user who has created a new field in the custom table.

How to find out the user details who has created a new field in the custom table.
Thanks,
Joan

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

Creation of key field in a database table

Hi All,
As per my requirement, i have to add few new key fields in an existing table.
Now total number of key fields are 17, but while saving this is giving me an syntax error stating 'According to SAA standard key fields cannot be more that 16'.
I s there any other go? i can not reduce the number of key fields.
Regards,
Pankaj.
Edited by: Pankaj Bist on Sep 5, 2008 3:24 PM

Hi,
In the se11 transaction,In the menu bar o like this.
Utilites-->Database Utility and the Press the button Activate and Adjust Database.
Note:
Make sure that you total data in the table to be downloaded into ur system.
As ctivate and Adjust Database makes data to be deleted.
Regards,
Rama.

Extract a value of a fields from an internal table

hello everyone,
i need to extract a value of a fields from an internal table, the fields is in a postion "sy-tabix" that i know, so i need to pick this value without using a loop
thank you.

Like this?
DATA: FIELD1 TYPE C,
FIELD2 TYPE C.
READ TABLE T_TAB INDEX 3.
FIELD1 = T_TAB-FIELD1.
FIELD2 = T_TAB-FIELD2.
Greetings,
Blag.

Field catalog for internal table in ALV

In my program the internal table consists many fields from various tables and structure doesn't belong to a single data table.
In order to get output in ALV grid following FM has been used
REUSE_ALV_GRID_DISPLAY
for field catalog the fields are defined specifically.
l_fieldcat-fieldname = 'VBELN'.
l_fieldcat-outputlen = 10.
l_fieldcat-seltext_l = 'Billing doc'.
l_fieldcat-no_zero = 'X'.
l_fieldcat-hotspot = 'X'.
append l_fieldcat to p_fieldtab.
..............and so on for all the fields.
Just wanted to know is there any other method to display all the fields of this internal table automatically so each field is not specified specifically.
anya

Hi
Try this instead:
*& Form create_fieldcatalog
* Create a field catalogue from any internal table
*      -->PT_TABLE     Internal table
*      -->PT_FIELDCAT Field Catalogue
FORM create_fieldcatalog
       USING     pt_table     TYPE ANY TABLE
       CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA:
    lr_tabdescr TYPE REF TO cl_abap_structdescr
, lr_data     TYPE REF TO data
, lt_dfies    TYPE ddfields
, ls_dfies    TYPE dfies
, ls_fieldcat TYPE lvc_s_fcat
CLEAR pt_fieldcat.
CREATE DATA lr_data LIKE LINE OF pt_table.
lr_tabdescr ?= cl_abap_structdescr=>describe_by_data_ref( lr_data ).
lt_dfies = cl_salv_data_descr=>read_structdescr( lr_tabdescr ).
LOOP AT lt_dfies
INTO    ls_dfies.
    CLEAR ls_fieldcat.
    MOVE-CORRESPONDING ls_dfies TO ls_fieldcat.
    APPEND ls_fieldcat TO pt_fieldcat.
ENDLOOP.
ENDFORM.                    "create_fieldcatalog

Displaying fields from a Z Table on CRM UI

Hello Experts
I am trying to display fields from a custom table onto a CRM UI form view.
1. I created a custom GENIL root object & Search object ie. ZCUSTOMER. & ZCUSTSEARCH
2. Tested this in the GENIL BROWSER to ensure that I could enter update values to the table and retrieve it via the search object.
3. Created a custom component ZCUSTOMER
4. Created a view with this component ZCUSTOMER using the wizard -
     Model Name - CUSTINFO
     BOL Entity - ZCUSTOMER
     No links to the custom controller or higher level objects.(as I do not want to tie this to any standard components)
Type of view - Form view
7. Created a Context node for the component controller with the same info as I did for the view.
8. Performed the binding of the view context node with the component controller context node.
9. Configured 1 field CUST_NAME to be displayed on the view.
10. Configured the run time repository to display the view.
Now the issue is..
When the view gets displayed, the field is displayed with the error "CUST_NAME not bound"
What am i missing?
Thanks
RLX

Hi Swati,
Thanks for the feedback. I re-viewed the WD_CREATE_CONTEXT method of the view controller implementation class and I see the following code in there already-
method WD_CREATE_CONTEXT.
create the context
    context = cl_bsp_wd_context=>get_instance(
          iv_controller = me
          iv_type = 'ZL_ZCUSTOMER_BSPWDCOMPONEN_CTXT' ).
    typed_context ?= context.
endmethod.
Does that look right or do I need to modify it?
Thanks once again for the help.
RLX

Fields in a BDC table

hai gurus....
What are the fields in a BDC table???
Thanks
Pavan

hi,
i hope this answer will helps you..........,
the BDCDATA table contains fields are...
BDCDATA-PROGRAM-----> this field describes the module pool program name which we are used for vaidating and updating the data.
BDCDATA-DYNPRO----
> this field describes the currently active screen.
BDCDATA-DYNBEGIN-------> this field describes the default or initial screen.
BDCDATA-FNAM----
> this field describes the field name which we are used in validations.
BDCDATA-FVAL----
> this field describes the field value which we are used in validations.
by using the above table we perfome the mapping logic in BDC for validating and updating the legacy system data.
regards,
Ashok Reddy
Message was edited by:
Ashok Reddy

Fields in an internal table

How to find number of fields in an internal table ?
my requirement is i have 20 internal tables and the data is being uploaded into an application server. so how to find no of fields in a particular internal table

concatenate all the fields and move them to final internal table , call the function module "GET_COMPONENT_LIST" and pass the work area of the final internal table in the parameter fieldname
***For getting no of FIELDS in an internal table ********
CALL FUNCTION 'GET_COMPONENT_LIST'
EXPORTING
    PROGRAM          = syrepid
    FIELDNAME        = 't_payr'
TABLES
    COMPONENTS       = fieldlist.
describe table fieldlist lines pyr_no_fields.
********end of getting no of fields**********
TRANSFER wa_mat_out_head TO P_FNAME.
LOOP AT GT_PAYR.
MOVE: GT_payr-LIFNR TO T_payr-lifnr,
       GT_payr-ZBUKR TO T_payr-zbukr,
       GT_payr-LAUFD TO T_payr-LAUFD,
       GT_payr-CHECT TO T_payr-CHECT,
       GT_payr-RWBTR TO T_payr-RWBTR.
Concatenate T_payr-lifnr t_payr-zbukr T_payr-laufd T_payr-chect
            T_payr-rwbtr into wa_mat_out-rec SEPARATED by ',' .

How to return all field names in a table

How do you write a report to return all field names in a table? I prefer the field names in a column.
Thanks
Wayne

Hi,
In Oracle it is,
Select column_name from user_tab_cols where table_name = 'Table_Name';
Note: Table_Name should be in capital letters
In MS SQL Server it is,
SELECT Column_Name + ', '
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'Table_Name'
Hope this helps!
Thanks
-Azhar

Report query not returning the field value from external table

hi
I have an issue regarding reports. I have a query having 4 fields from external table and remaining from db tables. the report query returns all the fields from the db tables and only 2 fields from external table. but the same query if I tried in plsql developer it returns all the fields values.
Can anyone please help me in this issue.
Thanks and Regards
kk

Duplicate post?
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer
Please log a SR if you do not get any reply to your thread instead of creating new one.
Thanks,
Hussein

Multiple clob fields in a single table

Are there any known performance issues associated with having 4 CLOB fields in a single table... the table as such will be relatively small.. like 100 MB... with most rows being << 50k.

Not really. If you need 4 CLOB columns and it makes sense to have alll the columns in a single table, go for it.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Changing the order of fields in an internal table

Hi all,
I'm using field symbol as internal table. this table has got a standard database structure.
I want to make the 3rd column of this internal table as 1st colums keeping rest of the columns as it is.
Is there any way to do this?
Thanks,
Anil.

Hi
Instead of directly taking the type as a standard structure , declare the FS internal table as type of types structure.
Data: fs_scarr like type_s_scarr.
FIELD-SYMBOLS <scarr2> TYPE fs_scarr
In the types put the third column as first one and use into corresponding in select query
or else
while displaying the internal table change the order of the columns
Loop at itab into fs_itab.
write : col3
col2
col4
endloop.
Thanks,
Viquar Iqbal

Aggregate a numeric field in an internal table

Hi All,
I have a small requirement in ABAPit goes in this fashion
I need to aggregate a numeric field in an internal table, the table is as follows
FLD1        FLD2         NUM1       FLD3
123A        B1             10            C1
123A        B1             25            C1
123B        B1             20            C2
123C        B2            10             C3
Note: FLD1, FLD2, FLD3 are of type numeric characters and NUM1 is of type number or integer
I want the result to be as follows
FLD1        FLD2        NUM1        FLD3
123A        B1            35             C1
123B        B1            20             C2
123C        B2            10             C3
i.e. values in field NUM1 should get add up when the values in all other fields are same
I am not able to use _collect_ for this as the fields contain numeric characters.
Regards and Thanks,
Antony

Hi Antony
collect here works like this:-
use at new field
      sum
end at.
Pls reward points if it wil be helpful.
Regards
Depanker

Reg Significance of Field CLUSTD in MSTD TAble.

Similar Messages

Maybe you are looking for