Reg.Simulation entry missing from configuration

Dear Experts
I am newly configure in IDES system,in which I create Inventory A/c,Consumption account,GR/IR a/c,Inv offsetting a/c,Inc/Dec a/c,Cash payable on purchase a/c ,Gain loss revaluation a/c and Loss in exchange rate a/c and configured in OBYC ,but in OMWB->Simulation all assigned are missing -
Posting line text PK Acct Deb PK Acct.Cr
Inventory Posting 83 Missing 93 Missing
Pls help me where I have missed to assign the G/L Account.And how to configure for come in OMWB settings.
Thanks
Rajakumar.K

Please maintain GL Codes against Gen Modifier/Valuation Class in OBYC settings.
Regards,
Alok

Similar Messages

TOBJ entries missing from upgrade dev and test systems

Hi,
We are in the process of ECC Upgrade from 4.7 to ECC 6.0 and upgraded our dev and test systems. We missing some SAP defined object entries in TOBJ table from dev and test. Because of this some of the roles getting transport errors if the roles contain those missing objects. We tried to transport the missing entries but we don't see any provision for that. Does any one through an idea to move those missing entries from dev to test. Not sure we will get same error in production. This table updates during upgrade and may be we missed some thing in test as though we followed the same upgrade process for both systems.
Thank you
Venkat

Possibly you are no longer licensed for components which these objects are called from in their concepts.
In that case the ability to start the component objects should be removed as well.
Of course if some Z-programs checked these objects or SAP's own "package concept" extended syntax checks did not respect them then you might have problems.
This should normally only apply to manual authorization instances, as if you had upgraded the roles and regenerated them, then you would not have this problem (in the roles).
It tells us something about how you or someone else without any training have built these roles (or subsequently mucked them up...)...
When reading stuff like this, I am always of two minds...
1) SAP should make the concepts simpler and more intuitive to use without "cowboy" activities allowed by users with SAP_ALL etc.
2) Customers should bleed for their own sins for not training people appropriatly (here, faking CV's is also ma major pest!).
It is always a bit of a cat & mouse game and ends up in forums such as SDN in the long run.
Some of it might also have become "available" to be used by SAP (I believe it was the 6.20 upgrade which installed everything...).
Real bugger. I would accept it and test as best you can. You can also compare "where.used-lists" and "code scans" before and after the upgrade to see whether it is used by foreign repository objects.
The scan is more reliable here, as sometimes the object name itself is a variable from a data declaration or condition which you cannot see in the "procedural" code.
Cheers,
Julius

Entry missing from calendar

I am trying to add an entry to my calendar and my phone shows 6 calendars, two yahoo accounts, then iCloud calendar, work, home all marked/checked. I create my entry it appears on my calendar list for a minute then disappears! It has removed all my previous entries from the other calendars and it only shows "calendar" under iCloud now....HELP!

Well, I'm looking at the just released 2.1 update for my iPod touch, and it is missing the one thing I wanted the most for ActiveSync...the ability to set which sub folders are synced automatically. I would assume that the iPhone update would also be missing this feature, since the base features in the OS are usually pretty similar between the two products. I REALLY HOPE I am wrong! Not being able to see my mail without manually opening the folders is really annoying.
(Yes, I've filled out the feedback form, for every release since 2.0...I even emailed Steve!)
I will keep my fingers crossed that the iPhone OS ends up being different than the touch this time around...

Sessions entry missing from Tools menu

I have just upgraded to Firefox 8. The "sessions" entry has vanished from the "Tools" menu. I had about 20 sessions recorded and would like them back.
If this feaature has been reemoved from Firefox, can anyone tell me where the data might be stored on my haard drive? If I have to, I will go through the file with a hex editor.

I just realised that the "sessions" entry was part of an add-on, Tab Mix Plus, which had been disabled by the Firefox upgrade. When I enabled it, everything worked fine:)

Page Type "Use Case" missing from Configure Component Palette

Hello,
According to "22.13.1.3 How to Work with Use Case Component Palette Templates" I should be able to create a new "Use Case" template as follows: From the drop-down list, choose Use Case, then click OK.
This is not the case, I only have either "Java" or "CSS", there is no "Use Case" that I can see to select. For reference please see: http://docs.oracle.com/cd/E24382_01/user.1112/e17455/creating_diagrams.htm#OJDUG4615
Does anyone have any idea how I can get "Use Case" to be an option?
Build JDEVADF_11.1.2.1.0_GENERIC_110907.2314.6081
Kind regards,
Allan.

Hi John,
Thanks for the confirmation. Unfortunately at this point in time I don't have a Support login, would it be possible for you to post that on my behalf?
I guess I'll try again in a later release, it's not critical functionality, but would have been nice to have.
Kind regards,
Allan.

Calling a Configuration Entry Point from a C# code module

Hi,
Is it possible to call a configuration entry point from a C# code module?
I have a custom process model which creates some configuration entry points.
One of the entry points, calls a C# method in a code module to display a Startup screen for the operator.
In an Editor User Interface, I have added a toolbar, now I want to execute the previous entry point initiated from my C# code to get the Startup screen again when a button is clicked on the toolbar.
Best regards

Hi James,
Thanks for your suggestion, but unfortunely the code hangs after executing the entrypoint, if have tried it in two ways, but both have the same result. Do you have any idea how to fix this.
Trial 1:
  Engine engine = new Engine(); ApplicationMgr applicationMgr = (ApplicationMgr)engine.GetInternalOption(InternalOptions.InternalOption_ApplicationManager);EntryPoints entryPoints = applicationMgr.ConfigurationEntryPoints; int intIndex = 0;foreach (EntryPoint entryPoint in entryPoints) {    switch (entryPoint.Name.ToUpper())    {        case "TOGGLE ONLINE <-> OFFLINE":            object objEditArgs = System.Type.Missing;           entryPoint.Run(objEditArgs); // Application hangs after executing this command, the entrypoint does not execute!             break;        default:            break;     }
     intIndex++;
Trial 2:
  Engine engine = new Engine(); ApplicationMgr applicationMgr = (ApplicationMgr)engine.GetInternalOption(InternalOptions.InternalOption_ApplicationManager);EntryPoints entryPoints = applicationMgr.ConfigurationEntryPoints; int intIndex = 0;foreach (EntryPoint entryPoint in entryPoints) {    switch (entryPoint.Name.ToUpper())    {
        case "TOGGLE ONLINE <-> OFFLINE":           // Application hangs after executing next command, the entrypoint does not execute!           applicationMgr.GetCommand(CommandKinds.CommandKind_ConfigurationEntryPoints_Set, intIndex).Execute(true);              break;        default:            break;     }
     intIndex++;
Best regards

Spry_menubar.js missing from the DW CS4 Configuration folder

Dreamweaver CS4 reports that spry_menubar.js missing from the DW CS4 Configuration folder (specifically, missing from the Inspectors sub-folder).
Can someone please point to a link wherefrom this can be downloaded, and so replaced?
Thanks in advance, Dan

Thanks so much for the answer.
It appears that SpryMenuBar.js may be different from the missing Configuration file, spry_menubar.js. I am hopeful that we can resolve this and, if different, learn where to download the correct .js file.
(Another configuration file was recently missing. A search brought up an Adobe download. So far, no such link has become available for this missing file, hence this query to the Forum.)
Again thanks, Dan

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

Chapter 29 is missing from "The Java EE 6 Tutorial, Volume II"

Chapter 29 is missing from "The Java EE 6 Tutorial, Volume II"
This is all that is available (on a single page):
Advanced Concepts in Java EE Security.
This chapter provides more information on securing applications.
Advanced Concepts in Java EE Security
After you have read the introductory chapters in Java EE Security, read this
chapter to learn more about using annotations
Anyone know where I can actually find the elusive Chapter 29?
Also, although Oracle recognizes that the document exists (https://www.sun.com/offers/details/java_ee6_tutorial.xml), you can no longer download it (+The offer you are looking for is no longer available.+).

Got the solution, need to include /faces before the Login and Error page in the <login-config> entry as follows:
<login-config>
<auth-method>FORM</auth-method>
<realm-name>file</realm-name>
<form-login-config>
*<form-login-page>/faces/Login.xhtml</form-login-page>*
*<form-error-page>/faces/Error.xhtml</form-error-page>*
</form-login-config>
</login-config>
This configuration works fine with all the browsers including Internet Explorer.

Entries removed from cache when calling get()

Hi. Have a problem where entries seems to be removed from the cache when calling get(). The problem occurs after the cluster has been idle (no calls to get or put) for a while. When I then call get for an entry that I know should be in the cache i can see, via an listener, that an entry is removed from the cache and the get call returns null.
My cache is wrapped in a class that does not expose any remove methods so I know that there is no calls to remove. Below is a log showing the debug print from when the removal is done and a thread dump on the thread that does the remove.
Attached you will find both a cache configuration and the code that produces the log below. Note that there is some code missing from the example but the missing code is only interfaces or datawrappers.
Hopefully someone can help me solve my problem.
Best Regards
Marcus
12539019 [] INFO ClientConnectionPortCacheImpl$DebugCacheListener - Entry removed - [1, null (null)]
java.lang.Exception: Stack trace
at java.lang.Thread.dumpStack(Unknown Source)
at com.ongame.server.domain.casino.cluster.impl.ClientConnectionPortCacheImpl$DebugCacheListener.entryRemoved(ClientConnectionPortCacheImpl.java:121)
at com.ongame.server.framework.cluster.cache.impl.coherence.CoherenceCacheFactory$CoherenceCacheDelegator$CacheEventAdapter.entryDeleted(CoherenceCacheFactory.java:212)
at com.tangosol.util.MapEvent.dispatch(MapEvent.java:199)
at com.tangosol.util.MapEvent.dispatch(MapEvent.java:164)
at com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:550)
at com.tangosol.coherence.component.util.SafeNamedCache.translateMapEvent(SafeNamedCache.CDB:7)
at com.tangosol.coherence.component.util.SafeNamedCache.entryDeleted(SafeNamedCache.CDB:1)
at com.tangosol.util.MapEvent.dispatch(MapEvent.java:199)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.DistributedCache$ViewMap$ProxyListener.dispatch(DistributedCache.CDB:22)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.DistributedCache$ViewMap$ProxyListener.entryDeleted(DistributedCache.CDB:1)
at com.tangosol.util.MapEvent.dispatch(MapEvent.java:199)
at com.tangosol.coherence.component.util.CacheEvent.run(CacheEvent.CDB:18)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service$EventDispatcher.onNotify(Service.CDB:14)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:34)
at java.lang.Thread.run(Unknown Source)<br><br> <b> Attachment: </b><br>coherence-java-example.txt <br> (*To use this attachment you will need to rename 455.bin to coherence-java-example.txt after the download is complete.)<br><br> <b> Attachment: </b><br>coherence-cfg-example.txt <br> (*To use this attachment you will need to rename 454.bin to coherence-cfg-example.txt after the download is complete.)

Hi Marcus,
Your configs clearly show that you cannot have eviction.
From what you have described, you are almost certainly seeing eviction.
I conclude that the config that is being used is not the config that you intend to get used. To verify this, you can look at the logs to see what config is getting used. I believe you will see what configuration is being used when that config file is loaded. For example, in version 3.2:
2006-11-22 19:32:13.068 Tangosol Coherence DGE 3.2/367 <Info> (thread=main,
member=1): Loaded cache configuration from resource
"jar:file:/C:/java/opt/coherence320b367/tangosol/lib/coherence.jar!/coherence-cache-config.xml"
Having seen this same problem before (encountering it myself and seeing others encounter it), we added that logging to be clear which config file was being used. If you use the command line tool, it will additionally show you the cache config for the cache that is being accessed when you type the "cache xxx" command (xxx being the name of the cache).
Peace,
Cameron.

Password key missing from Registry

Hi,
I have a 3rd party application running in Windows2008 Server-Std SP2
where on each time this apps launched, It will read/update the registry file
which contains below info. This setting is required for a remote DB connection.
On each connection the password field will go missing from registry config which
requires need registry the regedit manually again. We have been running this
apps for a long time Windows 2000 & Windows2003 for a very long time.
Need help on how resolve this issue in W2008Srv
Registry
Config
HKLocalMachine ->Software
->AppsName
Provider=MSDAORA.1;Password=abc;User ID=abc;Data
Source=www
* Missing password param on each connection

Not sure how reliable this workaround would be however, worth giving a try
You can use Group Policy Preferences to push the registry keys
http://technet.microsoft.com/en-us/library/cc753092.aspx
Here's an nice article with snapshots on usage of Group Policy Preferences to configure registry item
http://www.unidesk.com/blog/gpos-set-custom-registry-entries-virtual-desktops-disabling-machine-password ( the example mentioned in
the article is irrelevant, use the method to configure/push desired registry item)
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own and posted AS IS.

Password file may be missing or configured incorrectly.

Hi All
Platform:Windows Server 2003
DB: 10.2.0.5.0/Single instance
While creating the em repository I get the following:
2010-aug-23 14:18:05 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\DWDEV\emca_2010-08-23_02-17-46-PM.log.
2010-aug-23 14:18:06 oracle.sysman.emcp.EMConfig perform
ALLVARLIG: Password file may be missing or configured incorrectly.
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\DWDEV\emca_2010-08-23_02-17-46-PM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\DWDEV\emca_2010-08-23_02-17-46
-PM.log for more details.
Its clear what the problem is, I have tried to recreate the password file but I still get the same error.
my steps
1. shutdown the instance
2. orapwd file=orapwDWDEV password=mypassword entries=10
3. startup
One thing I wonder is the name of the passwordfile, I saw in one post that the name should be orapw<sid>, I noticed that he old name
was PWD<SID>. What controls the name (apart from the sid) ?
Any ideas how to handle this is appreciated.
Thanks
Magnus

It seems that I have misspelled the name.
It works now.
Stiil interested what makes the filename, the pwfile is named PWD<SID>.ora.
Can I name it what I like ?
/Magnus

Error in uploading BDC Models (Server name missing from URL in Property wcfmexURL)

Hi,
We are using multiple Dialogue Instances in DUET Enterprise.
Problem: Before we did the Reverse Proxy Configuration for App Servers, Our BDC Models got imported in SharePoint Successfully (Correct WSS Setup and STS Urls) but After doing the Reverse Proxy Configurations, when we regenerated the BDC Models, apparently Server Name is missing from URL of the Propoerty "wcfmexurl".
Below is the Error Text:
[ERROR] The LobSystem (External System) / LobSystemInstance (External System Ins
tance) Property with Name 'WcfMexDocumentUrl' has an invalid value 'https/sap/bc
/srt/wsdl/bndg_CF37C550B825080AE1000000AC1F18FD/soap12/wsdl11/allinone/ws_policy
/document?sap-client=400'.
    Error was encountered at or just before Line: '65' and Position: '20'.
Failed to import model: Role
[ERROR] The LobSystem (External System) / LobSystemInstance (External System Ins
tance) Property with Name 'WcfMexDocumentUrl' has an invalid value 'https/sap/bc
/srt/wsdl/bndg_CE38C550B825080AE1000000AC1F18FD/soap12/wsdl11/allinone/ws_policy
/document?sap-client=400'.
    Error was encountered at or just before Line: '42' and Position: '20'.
Failed to import model: UserRoles

Hi Holger,
Thanks a lot!
This Error is gone after implementing the Note. Now the generated BDC Models have the correct URL for wcfmexURL property.
now we have the Following Error:
[ERROR] Error loading URL 'https://sapbwX.srv.XXX.com/sap/bc/srt/wsdl/bndg_92
38C550B825080AE1000000AC1F18FD/soap12/wsdl11/allinone/ws_policy/document?sap-cli
ent=XXX'. This normally happens when URL does not point to a valid discovery doc
ument, service description, or XSD schema.
    Error was encountered at or just before Line: '48' and Position: '20'.
Failed to import model: Account
For this Error, our SharePoint Administrator is checking below Steps.
1.    1) Open “wcfmexDocumentUrl” URL in the browser and copy all SSL certificates (including Root Certificates) to a file. Then import these certificates in the Trust Relationships section. Then try the import of the BDC Models
2.
2) 2) Verifying Your server uses a virtual hostname and all the configuration (e.g. SSL certificate) is done for this virtual hostname. Also the URLs that are created and used in the BDC model are Same virtual hostnames, but not the ones from the physical server.
3. 3)Re-verify SAML Authentication type and transport security at SAP.
4) 4) Browse WSDL at SharePoint Server and verify “WSP:Policy” and in WSDL make sure that it contains an entry:
<sp:RequestSecurityTokenTemplate>
<wst:KeyType>http://docs.oasis-open.org/ws-sx/ws-trust/200512/PublicKey</wst:KeyType>
<wst:TokenType>http://docs.oasis-open.org/wss/oasis-wss-saml-token-profile-1.1#SAMLV1.1</wst:TokenType>
</sp:RequestSecurityTokenTemplate>
I will update the Results after these checks!
Thanks,
Saumil

Trying to save as PDF/A-1a: "Structure tree root entry missing" and "MarkInfo missing"

I would like to convert born-digital documents originally created in Word 2007 to the PDF/A-1a standard.
From Word, I am only able to Print to PDF/A-1b. I did that, opened the resulting PDF in Adobe Acrobat 9.3 Professional, and tried running the Preflight to save the PDF as a PDF/A-1a. I received the following two errors:
"Structure tree root entry missing"
"MarkInfo missing"
I'd like to know if there's a way I can remedy this situation, either from the Word doc or the PDF doc. Thank you.

I imagine that the original poster would like for a solution that simple to work. I also imagine that s/he gets the same error message I do every time I try to create a PDF from a Word document in the suggested way:
"Acrobat could not open '[file name].doc' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF or use the Acrobat toolbar found in Microsoft Office applications."
Is there any way to convert the PDF you get from printing to PDF to PDF/A-1a successfully?

Music is missing from Media files

So I have many CD's I have copied to iTunes. I copied them years ago. I'm now trying to copy some of the music files from media to my phone (non-Apple) which requires me to do it from the media file location on my windows.
I noticed music is missing from my music on iTunes. I have not found a way to update/backup whatever to get the missing music to the media files?

"Not sure how or what caused the Compilations folder in the file path."
iTunes will put any songs for which the "Part of a Compilation" flag is set into the Compilations folder. Unless you have an older type of iDevice there's really no need to ever use "Part of a Compilation" (and even if you do, its only necessary for "Various Artists" compilations). In this example, if you select the album in iTunes, right-click > Get Info > Summary tab and set Part of a Compilation to "No" (and assuming that you have configured iTunes to manage your library) the media will be moved to C:\Users\RS Desktop\Music\iTunes\iTunes Media\Music\.38 Special\Flashback_ The Best of .38 Special.
"So after I moved a few songs over, went to iTunes to play. It says it can't locate the songs."
Ah, that may be the problem ... based on what you're reporting you have these two options set under Edit > Preferences > Advanced:
This means that iTunes determines where to store media based on Artist and Album information - if you start moving files around yourself it will inevitably lose track of it (indeed, iTunes lacks any capability to keep track of media when moved by anything else, irrespective of its settings).
"How do if I click on a song a pop up asks if I want to locate, then I can go to the media files folder and get the song, but that if individually."
iTunes does sometimes automatically fix related links when you do this - however, it can't be guaranteed to do so and there is no "bulk fix" capability built into iTunes itself.
If possible, restore your iTunes Media using a backup taken before you started moving files around. Turingtest2 has a useful script (http://samsoft.org.uk/iTunes/scripts.asp#FindTracks) that may help to resolve further issues (as always, before you start running any scripts that may modify the content of your library take a backup first).

Reg.Simulation entry missing from configuration

Similar Messages

Maybe you are looking for