Reg:Simulation version key issue

Hi,
I am using simulation version key as SIM+++ .But as per document given below:-
The valid version numbers for simulation version can be entered in Customizing.
You can use the formatting characters + and *:
+ means exactly one character
If you enter SIM+++ the maximum length of the version number is restricted to 6 characters.
is a character string of no defined length at the end of the version number (up to the maximum length of 12 characters).*
If version numbers for simulations have been entered in Customizing, then you can only create versions that correspond with one of these entries
but when i am creating Simulation version SIMAA3 then also system is accepting whereas as per above document + sign is for character and not for digit.
So Kindly guide me in resolving this issue.
With Regards
Rohit Prakash

Project Version is snapshot/photo of project, you cant change it. It is generally taken to record the exact project status at that point of time.
Simulation version is used to simulate 'if then' conditions.Generally used during quotation phase or if you want see effect of particular event on project you can create simulation version see the effect and transfer back to operative or delete.
Project Version is only for info purpose and cant be transfered anywhere. Simulation version can be transfered to operative project.
1. http://help.sap.com/saphelp_erp60_sp/helpdata/en/d8/1fe8344d1d166be10000009b38f83b/frameset.htm
2. http://help.sap.com/saphelp_erp60_sp/helpdata/en/0b/ba853488601e33e10000009b38f83b/frameset.htm
Regards

Similar Messages

HT2240 I purchased a QT Pro Reg. Code Key. When I install it in the QT Preferences Panel, I get an: "Invalid Registration" note at the bottom, next to the "Buy QuickTime Pro" button to the right. Both on a desk top and a laptop. Win 7, QT version 7.7.1. N

I purchased a QT Pro Reg. Code Key. When I install it in the QT Preferences Panel, I get an: "Invalid Registration" note at the bottom, next to the "Buy QuickTime Pro" button to the right. Both on a desk top and a laptop. Win 7, QT version 7.7.1. No joy! I've been on the phone with Apple for a little more than an hour, so far. They have my money. anyone have any Ideas? Just kiss the thirty bucks goodbye?

You,Sir, are "The Man"! I followed the instructions and - viola - Joy in Mudville. Thank you, keep up the great work. Even the "Apple" people don't seem to know this. I was on the phone with them, passed from one to another, for over an hour. While waiting I stumbled on your advise and I was made free! If they ask you, charge them a mint for the information. You Sir have gone where no Apple has gone before.

Project Simulation Version

Hi,
Is there any Function Module or BAPI to extract all details of PRoject Definitions and WBS element and Network Activities for Project simulation Version/Version key.
Thanks
Ramesh

Hi,
Both options, as in DP81 we are able to select simulations versions.
But onces the quotations has been created we can't know the source. we know the project as is informed in the account assignment but not the simulation version we have used.
Has anybody faced this issue before?

Tecra M10 - Stuck CTRL key issue -- perhaps to do with BIOS?

Hello and thanks for reading.
I recently switched my Tecra M10 to Windows 7 (from XP) and it soon developed the dreaded "stuck CTRL key" issue. This causes the keyboard to behave as if the CTRL key is permanently depressed. Sometimes hitting a combination of keys, or bringing up the onscreen keyboard, temporarily solves the issue, but then it returns.
It seems to be an issue many people have, with no simple solution. I've looked at every thread about it I can find, and tried many things to do with drivers etc. without any success.
So firstly, if anyone knows a remedy that works for this particular machine, I would be very grateful to learn it!
Then, there are two things I've not yet done: update BIOS and disable pinch zoom.
I was looking at the following BIOS update:
http://www.toshiba-asia.com/sg/support/drivers/details/25244
... which is version 3.00 and seems to be most recent. My own version is 1.90.
However version 3.00 is labelled "For PTMB0* ONLY". I don't know what this means or whether it applies to me. Can anyone help? Should I install this BIOS?
For the pinch zoom, I've been told that disabling it does sometimes cure the CTRL problem -- but I can't find any pinch zoom facility on the M10. I suspect it simply doesn't have one. Is that right?
Many thanks for any help you can give.

Hi
> I was looking at the following BIOS update. which is version 3.00 and seems to be most recent. My own version is 1.90.
There are different Tecra M10 models on the market.
Check the labels at the bottom of the unit. There you should find some numbers like for example PTMB0E-01K00LGR
The first 6 characters are important: for example PTMB0E
I assume your notebook belongs to European series.
In such case you should check the Toshiba EU driver page for possible BIOS update.
http://www.toshiba.eu/innovation/download_drivers_bios.jsp
However, on Toshiba EU driver page you will find also the BIOS v3.0 for all European Tecra M10 units.
Anyway, back to the CTRL button issue: guess what, you should connect an external USB keyboard and should check how the CTRL button acts.
In case the USB keyboard would work properly, the CTRL button of internal keyboard is affected and you will need to replace the internal keyboard.
PS: it could be possible that the option "sticky keys" has been enabled. To disable this function, you have to press SHIFT button 5 times in the row.

CJV4, WBS simulation version cost in COSS and COSP by cost element

Hi PS expert. (-:
IN PS When we freeze a simulation version with CJV4, (operative data to version), sap will create new object number in table VSCAUFV_CN for each network and VSPRPS_CN for each Wbs element related to the simulation Version.
In our environment, SAP will add record in COSS and COSP for the new object number for Network but NOT FOR THE WBS.
Is it standard to NOT record the cost in COSS and COSP for the simulation cost of the WBS (against the new object number?)
That mean we will able to see the simulation cost by cost element for network, but NOT FOR WBS element.
For the WBS, we only record the cost in RPSCO by cost category.
Is there a way to active (with an exit ..classu2026bapi) the recording of the cost of the WBS by simulation version in COSS and COSP
Thanks you very much for your help
Sophie

hi sophie,
create separate network for each wbs in project. see if this can solve your issue.
vengaiah chowdary

DS board simulation version owner

Hi All,
Can some one tell me the reason for the DS board simulation version owner field not getting populated. We made some change in PB and saved them in a simulation version. When we tried to process the simulation version from /sapapo/cdpss0, its not allowing us to open it in edit mode. We have found that the field simulation version owner is blank. Any body have a hint about the potential reason for the filed not getting populated.
Thanks in advance,
Kalyan.

Dear kalyana kothamasu,
This is something strange!!
Tell me one thing, when you execute the transaction for planning board, is there any user name on overall profile and work area.
jsut check that.
Means is there any user specific overall profile or user specific work area. check that.
I think it should not affect as such, but nothing sure about APO where things can get affected...... as usual.
Check these 2 things your issue should be solved. since there is nothing custumisation for what you asked in the issue.
Regards,
Pravin Mukkawar

Sales pricing from Project Simulation Version

hi.
Has anybody created sales pricing for the project using transaction DP 82? It does not create the sales pricing for the simulation version, even though I have provided the version key.
The status of the simulation version of the project is CRTD. I am using the network cost planning in the simulation version of the project. Am I missing something here? I am hoping to get an answer from this community. Thanks for your help in advance.
Regards
Mey

Hi
The following are the prerequisites for the sucessful fuctioning of sales pricing for simulation versions of the project.
1. A dynamic item processor profile (DIP profile) must have been maintained in the customer inquiry.and must be Customized for Project System.
2.The same DIP profile must have been entered on the Sales B tab page of the item detail view in the SD order.
3. A customer inquiry with at least one item that has to be maintained and assigned to a billing element must exist. The system determines the SD data for sales pricing from this inquiry item.
4.You have planned costs (in concordance with cost elements) for your project version.
If these prerequisites are met, i think it will work
Reward if helpful
Regards
Murali

FC req copy into Simulation version

Hi,
Having an interesting problem at the moment, we have PIR's created in ECC that are then reprisented by FC Req's in APO, so all is as expected.
The issue that I am having is that if I copy the active version for a simulation version the FC Req's are being shown as Dep demand!!
Have I missed something on the copy back process?
Plus I have noticed that if for example the FC Req is for 10 in the active version not only does it change the element type but also splits the order down (as if rounding was being used) so I end up with 5 dependent demands of 2.
Thanks in advance.
Edited by: UKuser on Nov 19, 2009 2:38 PM

Hi,
1)For forecast coming as Dep demand, check whether the
ATP categories, category groups are transferred
correctly from active to simulation version.
2) Check the logs of copy version jobs which will give
some insight to you to act accordingly
3) For splitting of demand, check whether the lot size,
product split etc., are maintained accordingly and
transferred correctly
Regards
R. Senthil Mareeswaran.

Quotations from Project Simulation Version

Hi experts,
We are creating project quotations using DP81. We create multiple quotations for the same inquiry using Project Simulation Version.
We would like to know from which version the quotation document has been created, is it possible?
Or can you suggest any workaround?
Thanks

Hi,
Both options, as in DP81 we are able to select simulations versions.
But onces the quotations has been created we can't know the source. we know the project as is informed in the account assignment but not the simulation version we have used.
Has anybody faced this issue before?

Creat simulation version

Dear All
when i try to creat sim version in cjv4 i get error massage (Results analysis key 000001 not intended for determining capitalization values) pl gave solution on this.
Regards
Prathamesh

Try carrying out the settlement first (if you are using Investement profile - AUC settlement) and then create the simulation version.
If not, delete the investment profile on the WBS elements and create the simulation version.
Regards
Sreenivas

Simulation version getting updated from active version

Hi all,
We noticed that in Active Model 000, existing Simulation Versions are getting updated (changed) daily, even though we do not know any job scheduled by us which could do such update. I tried to search for any job running at the time of version change, but could not find through SM37.
Can you guess what could be triggering this change?
Regards,

Hi,
You can see the difference in master data between planning versions. Select 2 planning versions with the Ctrl key, select Additional Functions then Master Data Comparison. Run wide open and check the log. Compare 001 and SM1 then 000 and SM2. Just a thought.
I don't think transactional data differences would affect the "Last Changed" field.
Best Regards,
Mike

Simulation version for AM

Hello Experts,
There is a field called simulated version in the transaction depreciation simulation. How to configure such simulated versions? Kindly explain in detail.
Regards,
P.Krishna Chaitanya.

Krishna-
You can go to SPRO -> Financial Accounting -> Asset Accounting -> Information System -> Define Simulation Variants for Depreciation Reports
And here is some help from SAP on the variants:
Define Simulation Variants for Depreciation Reports
In the following step, you define the simulation verstions for depreciation reports. You can enter a simulation version when you start a standard depreciation list. The report is then executed with simulated depreciation terms.
All depreciation lists that allow the use of simulation versions show the simulation version that was used in the page header of the list. You can also request a list of all the replacement rules that were used in the simulation (by pressing F2 = choose). You can also print this list.
Example
You can simulate how depreciation would look if you used declining-balance depreciation instead of straight-line depreciation for your assets.
Standard settings
SAP provides simulation version A1 as an example.
Activities
1. Define your simulation versions.
2. Enter the following for your simulation version:
The depreciation area, for which the simulation takes place
The asset class for the simulation (you can make a generic entry from left to right using the "+" symbol)
The depreciation key for the simulation
A valid-to date. The assets that are included in the simulation must have a capitalization date before this date.
3. Define the following simulation parameters, depending on the purpose of the simulation:
New depreciation key
Change to the useful life as a percentage, for example 80% or 125%
A valid-from date. The assets that are included in the simulation must have a capitalization date after this date.

Key issues involved while technical upgrade of 4.6c to ecc 6

Hi Guru's
Will anyone share the key issues and time consuming activities involved in tech upgrade project from 4.6 c to ecc 6 at different stages.
Mail me [email protected]
Reward full points for the answer
Regards,
Venkat

Dear Venkatesh ,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

No phone service after a new iTunes version is issued

I tried to use my phone yesterday and the call didn't go through. When I connected to my computer I saw that a new iTunes version (9.0.2.25) had been issued, and when I synched with iTunes it restored my connectivity. The same thing happened the previous time a new version was issued. There was no message on the phone saying it needed to connect to iTunes. I rely on the phone for continuous service in case of emergency, and don't sync it every day. If I were out of town I would be out of luck. Does Apple (or AT&T) de-activate the service each time a new version is issued, and rely on customers to re-sync when their phone goes dead?

I have not experienced the same - not with any iTunes update when released.

Windows 8 Key Issue

Here's my problem. Windows 8 came preinstalled on my computer; however, I accidently deleted the Windows 8 key from the bios and now Windows keeps asking me to enter the correct key. Since there is no longer a sticker with the key included with the computer I have no way of finding the key. Does HP keep a record of the keys tagged to the serial number? Or am I just out of luck?
I called HP Support about this and they told me to get the key off the CDs which were included with the computer. When I told him there were no CDs, he said I had bought a used computer mascarading as new because all of their computers ship with Windows CDs. When I disputed this he said that Microsoft could solve the issue for me. Microsoft said that HP could solve it. Can anyone help me? I'd rather not spend money on buying Windows 8
Thanks in advance,
Mike
This question was solved.
View Solution.

HP does not retain records of the keys issued . HP also does not ship Windows CD's with the computers unless they were specifically ordered. If you have somehow deleted the key then you are out of luck, sorry.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Reg:Simulation version key issue

Similar Messages

Maybe you are looking for