Reg SLD

Hello,
I little bit confused in SLD for PI 7.1..
For eg we had a client "Turbo" .He used to produce TV,Refrigerators,washing machines & etc..
for this how many products should i have to create...if i create one product "Turbo" and how many software component versions should i have to create..
The main problem is for this project am the only PI developer working..i have to design everything..that too i had experience in PI7.0 only..
Please help me regarding this SLD design
If there is any helpful information reg SLD design please provide me..
Thanks in advance
Mark

1) Check this SAP document to know how you should relate/ group your products:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40a66d0e-fe5e-2c10-8a85-e418b59ab36a?quicklink=index&overridelayout=true
2) Check my answer on how to design your system: Strategy/Recommendations for SLD content
Regards,
Abhishek.

Similar Messages

Reg:SLD configuration

Hi.
we are trying to do SLD configuration.In that we need to change the value of gw/max_conn_per_wp parameter to a higher value.
Default value of this profile parameter is 10 in our server.
When we tried to change this value to 200,it shows that" **This change is not permanent and will be lost when the server is restarted"**
How can this value be modified to 200 permanently?

hi,
I think the parameter has to be set at OS level.
Refer the SAP Note 972262
Regards
Ramesh P

HELP REG "SLD SETUP"

Hi all,
i have installed NW2004s AS ABAP,now i wanna configure SLD.can anyone give me the steps
is it mandatory to install AS JAVA for setting up SLD.my requirement is to set it up on AS ABAP.pls help
rgds,
rajesh

See here:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000674007&
Planning Guide - System Landscape Directory
Post-Installation Guide - SLD of SAP NetWeaver '04
Post-Installation Guide - SLD of SAP NetWeaver 7.0
SAP Solution Brief - SLD
User Manual - SLD of SAP NerWeaver 7.0
User Manual - SLD of SAP NetWeaver '04

REG: Error while importing objects in SLD

Hi All,
            While importing SLD objects from Development to Production I am facing following problem
             The selected import requires model version 1.6.16 or higher. The model version of target namespace sld/active is outdated and must be updated to the required version before this import can be performed
             The error is due to different Model versions of SLD. Development is pointing 1.6.16 where as Production is pointing to 1.5.42.
        How do I upgrade my production SLD Model version to 1.6.16 ?
Thanks,
Siva

You need to download the modal content from SAP marketplace and apply it. Usually basis team is responsible for this.
VJ

Reg : Initial configuration for SLD

HI all ,
In the netweaver administration portal we have a option for deploy and change .when we click on that we have some options for initial configuration.Now the doubt that i have is that we have installed netweaver java stack on a server .We have configured local sld on that .We want to connect to a seperate ECC 6.0 system.That system doesnt have a sld configured for it .So we want to bring that system into our sld.I have configured NWA_01 i.e .configuration for local sld and NWA_03 i.e. create a connection to the SLD and Setting required authorizations for SLD (CIM client settings) in netweaver administrator portal.Do i need to configure only these or anything else other than this .One more thing is that when i enter the netweaver administrator portal i am getting these error messages.
System Landscape Directory is not accessible
Only local system can be administered
Any pointers regarding this.Thanx in advance .

Hi there,
The java stack is installed as standalone or ABAP+Java?
You need to maintian SLD server details in RZ70 on ECC server and test if data is sent successfully. Check for RFCs SLD_UC/SLC_NUC in ECC.
Also, check if SLD server is running.
regards, Sean.

Installing ECC 6.0, XI not full in place Option for SLD

We r Installing ECC 6.0, and we dont have XI fully installed in place and also another ECC 6.0 in place.
While installing ECC 6.0, it gives 3 options reg the SLD configuration as :
> No SLD destination
> Configure a local SLD
> Register in the Central SLD
Which one should I select.
If i select the first option (No SLD destination), in the future can I change it to the last one.
-Naveen.

Hello Naveen,
The first one is telling that u r not using the SLD in u r landscape
The second one is telling that U r about to configure the Local SLD on u r current installation only...
The third thing tell us that if there is already configured SLD in u r previous system and u want to use that SLD for u r current installation then u have to redirect the configuration parameter to the existing SLD only...
AS for example...
In my system previuosly i have one DEV system installed with SLD configuration...after ward i had installed the PRD system and at the time of installation by mistakenly i had installed a new SLD over there in PRD also.....
but after some time as of requriement i have to make only one SLD between DEV & PRD system so later on i will redirect the PRD SLD to DEV SLD...
so after installation u can change/reconfigure u r SLD also...
if you want the steps for the same then let me know..
if this information is usefull to u then please give points..
thanks

Aspects of SLD in SAP XI

Hi all ,
Can any One explain about the aspects of SLD in SAP XI?
REG
Kevin

Hi Kevin,
I think your are asking for the dimension in SLD if so,below is the answer
SystemLandScape have 3 dimensions they are
1.The solution dimensions(what software processes are installed)
2.Transport dimension
3.Technical dimension(what products are installed on which hosts on particular networks).
The SLD should capture all the three dimensions of the system landscape.
Kevin why ont you put some portal relavant questions?
reg
balaji

TCode GRMG - RFC dest - Type G - to SLD

Hi,
I am following blog
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
I have downloaded the xml template from note 634771.
While customizing the transaction GRMG, I have created an RFC destination of type G, to connect to SLD.
Connection test of the above RFC destination, gives the
Test Result : Bad Request
Response Body :
<b>400 Bad Request</b>
<b>HTTP method GET is not supported by this URL</b>
Can someone help me with this.
Thanks,
-Naveen.

Tuhin Kumar Oza,
Cud u plz go through the following link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/a1/9cdb4064da712ae10000000a155106/content.htm
see the table under the head procedure.
See the Path Prefix entry against System Landscape Directory.
Reg,
-Naveen

The comunication between SLD and SAP systems.

Hi!
Here is a statement from SAP official document:
By copying the files slddest.cfg and slddest.cfg.key, you have configured TREX for integration in the System Landscape Directory (SLD).
TREX checks every five minutes whether anything has changed in the TREX system landscape and reports any changes automatically to the SLD server. If nothing has changed, TREX reports every twelve hours to the SLD server. This allows you to see that this landscape is still active.
I wonder whether all other SAP systems communicate with SLD in the same fashion as above? If NOT , what is different?
Thanks for clarification.

Hi,
This is how it exchanges data with ABAP and JAVA based systems -
"JCo RFC Provider for accessing SLD data from ABAP-based systems. SLD has a built-in API for Java-based systems that requires no manual configuration for JAVA based systems"
Reg, DIbya

A Doubt in Creation of Tech. System for a BW Server in SLD

Hi Experts,
I want to access BI Queries in a BW System in VC 7.1.
When I am trying to create a New Technical System in SLD of CE 7.1 Server, it is giving me the options, to Select the System Types as
1. AS ABAP
2. AS Java
3. Standalone
4. Third Party
So, Whether we need to Select the System AS ABAP or we need to Install anyother thing to get a Systems Option as ABAP.
Also, I read in a SAP Note, That we have to define the System as AS SAP_BW.
Note: BI Kit is installed in my CE 7.1 Server
Please help me to solve this issue.
Thanks in Advance.
Regards,
Palani

Hi Palani,
you don't need an SLD for configuring Bi connections. Please have a look at
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm
how to define a BI connection for Visual Composer 7.1
Best regards
Hartmut

NWDI in the XI Scenario - SLD

Experts,
I have created a track to transport the XI content.
We have two SLD servers in the landscape. The first is used by XI and contains all the required XI business systems and the second is used only by NWDI and contains only the SC definitions.
My question-
DOes the SLD for NWDI need XI system details???? According to my understanding, NWDI needs only the component information from the SLD.
Bascially, do i need to import the business system data into the SLD that is being used by NWDI???
thanks,
Vineeth

Did a little research and found that the SC information is sufficient for NWDI.

Logical system name in business system (SLD)

Hi,
While creating business system in SLD what should give for the logical system name?
Should the logical system name exists in ABAP stack or the new one?
Thanks.

Hi,
If you are creating the BS for SAP R/3 in SLD means we have to give the LS name which we had in SAP R/3( goto SALE and take the LS from there)
Goto Assign LS-----take the client which you are using for SAP R/3 and take the LS name assigned to that Client
Regards
Seshagiri

Problem with business systems in SLD

Hey guys
i m doing a IDOC to file scenario and m creating two business systems in SLD
the first one uses the logical system name of the R/3 server and has been configured as WAS ABAP.
when i try to create the second one as a third party using the logical system name i defined in BD54(on R/3 server),i get the error sayin that a business system already exist with the logical system name.
i do have one businees system which is using the same logical system but that has been configured as WAS ABAP.
cant i assign two different business names to same logical systems?
thanx
ahmad
Message was edited by:
Ahmad

Hey
thanx ,now when i try to use the same business system name for the R/3 server in the second scenaario,i dont see the business system in ID,i did cache refresh,
also just want to make sure
i have configured my SLD as under for the first scenario
created two business system,first one is using the logical system name of the R/3 server configured as WAS ABAP and the second one is configured as third paarty and using the logical system name created in BD54.
do these setting looks good to u?
now can i use both these business system in my second IDOC to File scenariio?
thanx
ahmad

How to create Business Services in SLD

Hi Experts,
I'm working on SAP background and wanted to learn SAP-XI.
I'm interesting to work in XI and for this need your support.
I installed XI in my PC and wanted to start learning.
But there are no Business Services (or) Systems configured in the SLD.
I want to start with a simple FILE to FILE scenario.
Could anyone please tell me how to create services in SLD and carry on from there.
Thanks,
Prajwal

Hi,
please look at the bleow links
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4013f6bb-7ec3-2b10-62b5-e5be01e498f7
Blogs
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i - Step by Step Guide: XML File 2 XML File Scenario: Part I
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii - Step by Step Guide: XML File 2 XML File Scenario: Part 2
Regards,
Pradeep A.
Edited by: Pradeep Amisagadda on Apr 16, 2010 9:39 AM

Setting Business Systems in SLD

Hi,
In our SLD, we have two different Business Systems associated with the same ABAP Technical System and same client too. One BS is related to one Integration Server (XI) -this BS was imported in SLD- whereas another BS is related to another one (PI).
When we run a soap interface in XI, we see the request reaches the correct BS (XI BS). However, the response is sent by the PI BS through the XI interface, getting an error.
We need to have both Business Systems due to we are using the same SLD for XI and PI.
Any idea?
Thanks in advance,
Samantha.

Hi Luqman,
Their names are different. Each BS is related to a different Integration Server, but their ABAP TS and client are equal.
XI interfaces should use the XI BS, whereas PI interfaces should the PI BS, but this is not so.
Is there any option that selects by default a particular BS in SLD when both BS using the same TS?
Thanks,
Samantha.

Reg SLD

Similar Messages

Maybe you are looking for