Reg SPAU list

Hi,
we have upgraded from 4.6c to ECC 6.0 and i have a query regarding SPAU list, for couple SAP standard programs we have adopted modifications but an hour later we decided to reset to orginal .
Is there any way to achieve this.
Thanks
David

Hi
I did tried to retrieve the old version in my case which is upgraded version, but for some reason its asking for access key
Let me know
Thanks in advance
David

Similar Messages

How to remove obsolete oss note from SPAU List

Dear All,
How to remove obsolete oss note from SPAU List. Bocz it having yellow trafic Signal and it is not allowing me to reset to orginal or adopt.
Please tell me how to reolve this problem.

Hi,
Please mention the Netweaver release of your system.
Next, if you mention the note is obsolete - the traffic light should be grey.
If its yellow, that means semi-automatic adjustment needs to be made.
If you click on the obsolete greyed out note, you get a message saying the note correction was delivered with upgrade or support package and it could be reset.
If you click on the yellow note, the system would try to reapply the note via SNOTE.
Please try either or the above and let us know the system response.
Regards,
Srikishan

Refresh or Regenerate SPAU List

H,
I have deleted a Transport Request related to SPAU Adjustment. In SPAU (All those objects with Yellow Lights under W/o Modification Assistant Tree) i reset them to Original and System prompted for a Transport Request. Once the reset is done, I thought i should have used Adopt Modification (Sicne these Objects fall under W/o Modification Request Category). So i deleted the already created Transport Request in this Adjustment. Now i could not see those objects in SPAU list. To add another Transport Request, i have to pick them from SPAU list. But those Objects are not listed now in SPAU list. What should i do to get those objects back in SPAU? Is there any program to be Run to regenerate/Refresh the SPAU List. I hope i have described the issue in more detail. Please let me know if it is not clear. Please let me know your Solutions to this problem. I need your help urgently.
Thanks and Regards,
Kannan.

Hi Peter,
Thansk for your reply. They are listed in the SE95 with New Transports under the Reset Objects Tab. But i have deleted that Transport Request hoping that Deleting the transport Request will show up the Original SPAU List (Before Adopting Modification). So the Reset Objects List has the Invalid Transport request. Is it possible for me to attach other transport request to these Objects.
Thansk and Regards,
Kannan

Urgent !!!! Spau List : Note Corrections

Hi,
we are upgrading the system and needs to clear the spau list. there is a huge list. I implemented few of this. But i am not able to implement the remaining.¨I see two types of errors.
1. "Format of correction instructions XXXX XXXXXX XXXXXXXX ; unable to
read corr. instruct."
2. And other issue is i get a green question mark for some notes.
NOw dont know how to clear this. can somebody help me in this.
Apart from Note correction there are also list in With Modification Assistant and Without Modification Assistant.
My second query is can ignore the above note errors and move ahead with With Modification Assistant list. Or i need to clear all Note correction and then proceed with With Modification Assistant & Without Modification Assistant.
Please help and guide me.
Thnaks....

Hi,
Can you give the solution as to how u fixed it and answer the Questions which u have asked yourself pls...
Regards

SPAU list contains SAP notes with 'Unspecified Adjustment Mode'

I'm just completing an upgrade from 46c to ECC6 and I have reached the SPAU stage. In my list of adjustments all the SAP notes have the status of 'Unspecified Adjustment Mode' with a question mark. I think they should be either green, red or yellow to indicate what to do next. Is there something I need to do to get them into that state?

Seems like for some reason the adjustment mode job didn't finish... to restart it just click on the question mark and that should process it, then you will see a semaphore. the job can take a few minutes.
Regards
Juan

Reg: ALV list Display

Hi Experts,
My requirement is i need a button along with the tool bar of ALV list display . when i check the button it should display the Selection criteria values which user entered as a pop up .
Is there any default tool which displays user selection values for ALV list display ?
Regards,
Vikram.S

> Is there any default tool which displays user selection values for ALV list display ?
No such program.
But you have to write a code for it. Activate Button using the pf-status. then Handle that button in User command , and show a popup with the selection values.
Function used to get the selection details is
RS_REFRESH_FROM_SELECTOPTIONS
get the data and show it using a Popup. May be a ALV popup select function will help you.

Reg:ALV list Background Problem

Dear All,
I created a ALV LIST report. While i am running in that program in foreground i am getting timeout error. While running in background i am getting the output in improper way. While i am seeing that report in spool request and pressing the spool output display in maximum width i am getting the output list fields in improper position. What should i have to do for this issue?
Thanks,
Sankar M

When you execute the report in background, u require to provide the width of the output it will be some thing like X_65_255.Try increasing the width.
One more alternative is go to SPAD -> In settings Menu option -> Select Spool System -> go to others tab -> select the check box number of columns for list display format.
Hope this inputs will help you.
Regards,
Shafivullah Mohammad

Reg vendor list

Dear Gurus,
how do i check the vendors names and the list of all the materials they are supplyng to a plant...?

it is possible once u create the source list .
u craete source list for plant mat combinatiuon for vendor.
then u can check with table EORD in se16 .
rewds

Reg:block list

Hi,
Can i get the sample report for alv blcok list dispaly.
Thanks,
Jeya

hi prabhu,
chk this:
REPORT ZKEERTHI_ALV3   LINE-COUNT 100                        .
*& tables declaration
tables: mara.
*& type-pools declaration
type-pools: slis.
*& data declaration
data: g_repid type sy-repid.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV, "mara
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA : IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV, "makt
       WA_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA : IT_FIELDCAT2 TYPE SLIS_T_FIELDCAT_ALV, "marc
       WA_FIELDCAT2 TYPE SLIS_FIELDCAT_ALV.
DATA: GT_PRINT TYPE SLIS_PRINT_ALV,
      WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
      XS_EVENT TYPE SLIS_ALV_EVENT,
      GT_XEVENTS TYPE SLIS_T_EVENT,
      GT_YEVENTS TYPE SLIS_T_EVENT,
      GT_ZEVENTS TYPE SLIS_T_EVENT,
      WA_SORT TYPE SLIS_SORTINFO_ALV,
      IT_SORT TYPE SLIS_T_SORTINFO_ALV.
DATA: BEGIN OF it_mara occurs 0,
        MATNR LIKE MARA-MATNR,
        MTART LIKE MARA-MTART,
        MATKL LIKE MARA-MATKL,
        MEINS LIKE MARA-MEINS,
        NTGEW LIKE MARA-NTGEW,
      END OF it_mara.
DATA: BEGIN OF IT_MAKT occurs 0,
        MATNR LIKE MAKT-MATNR,
        SPRAS LIKE MAKT-SPRAS,
        MAKTX LIKE MAKT-MAKTX,
        MAKTG LIKE MAKT-MAKTG,
      END OF IT_MAKT.
DATA: BEGIN OF IT_MARC occurs 0,
        MATNR LIKE MARC-MATNR,
        WERKS LIKE MARC-WERKS,
        LADGR LIKE MARC-LADGR,
        MTVFP LIKE MARC-MTVFP,
        dispr LIKE marc-dispr,
        dismm LIKE marc-dismm,
        dispo LIKE marc-dispo,
      END OF IT_MARC.
*& initialisation
initialization.
g_repid = sy-repid.
*& selection screen
selection-screen begin of block b with frame title text-001.
select-options: s_matnr for mara-matnr,
                s_mtart for mara-mtart.
selection-screen end of block b.
*& start of selection
start-of-selection.
perform get_maradetails.
perform get_maktdetails.
perform get_marcdetails.
*&      Form get_maradetails
      text
--> p1        text
<-- p2        text
FORM get_maradetails .
select matnr
       mtart
       matkl
       meins
       ntgew from mara
       into table it_mara
       where matnr in s_matnr and
             mtart in s_mtart.
ENDFORM.                    " get_maradetails
*&      Form get_maktdetails
      text
--> p1        text
<-- p2        text
FORM get_maktdetails .
select matnr
       spras
       maktx
       maktg from makt into table it_makt
       for all entries in it_mara
       where matnr = it_mara-matnr..
ENDFORM.                    " get_maktdetails
*&      Form get_marcdetails
      text
--> p1        text
<-- p2        text
FORM get_marcdetails .
select matnr
       werks
       ladgr
       mtvfp
       dispr
       dismm
       dispo from marc
       into table it_marc
       for all entries in it_mara
       where matnr = it_mara-matnr.
ENDFORM.                    " get_marcdetails
*& end of selection
END-OF-SELECTION.
perform sort_list.
perform modify_fieldcat.
PERFORM EVENT_LIST.
PERFORM BLOCK_LIST.
*&      Form modify_fieldcat
      text
--> p1        text
<-- p2        text
FORM modify_fieldcat .
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-TABNAME = 'IT_MARA'.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NUM'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-OUTPUTLEN = 18.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MTART'.
WA_FIELDCAT-TABNAME = 'IT_MARA'.
WA_FIELDCAT-SELTEXT_L = 'MAT TYPE'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 5.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MATKL'.
WA_FIELDCAT-TABNAME = 'IT_MARA'.
WA_FIELDCAT-SELTEXT_L = 'MAT GROUP'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-TABNAME = 'IT_MARA'.
WA_FIELDCAT-SELTEXT_L = 'UNIT'.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-OUTPUTLEN = 5.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'NTGEW'.
WA_FIELDCAT-TABNAME = 'IT_MARA'.
WA_FIELDCAT-DO_SUM = 'X'.
WA_FIELDCAT-SELTEXT_L = 'QUANTITY'.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-OUTPUTLEN = 15.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-FIELDNAME = 'MATNR'.
WA_FIELDCAT1-TABNAME = 'IT_MAKT'.
WA_FIELDCAT1-SELTEXT_L = 'MATERIAL NUM'.
WA_FIELDCAT1-COL_POS = 1.
WA_FIELDCAT1-OUTPUTLEN = 18.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-FIELDNAME = 'SPRAS'.
WA_FIELDCAT1-TABNAME = 'IT_MAKT'.
WA_FIELDCAT1-SELTEXT_L = 'LANGUAGE'.
WA_FIELDCAT1-COL_POS = 2.
WA_FIELDCAT1-OUTPUTLEN = 2.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-FIELDNAME = 'MAKTX'.
WA_FIELDCAT1-TABNAME = 'IT_MAKT'.
WA_FIELDCAT1-SELTEXT_L = 'MAT DESC'.
WA_FIELDCAT1-COL_POS = 3.
WA_FIELDCAT1-OUTPUTLEN = 40.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-FIELDNAME = 'MAKTG'.
WA_FIELDCAT1-TABNAME = 'IT_MAKT'.
WA_FIELDCAT1-SELTEXT_L = 'GRP DESC'.
WA_FIELDCAT1-COL_POS = 4.
WA_FIELDCAT1-OUTPUTLEN = 40.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
CLEAR WA_FIELDCAT2.
WA_FIELDCAT2-FIELDNAME = 'MATNR'.
WA_FIELDCAT2-TABNAME = 'IT_MARC'.
WA_FIELDCAT2-SELTEXT_L = 'MATERIAL NUM'.
WA_FIELDCAT2-COL_POS = 1.
WA_FIELDCAT2-OUTPUTLEN = 18.
APPEND WA_FIELDCAT2 TO IT_FIELDCAT2.
CLEAR WA_FIELDCAT2.
WA_FIELDCAT2-FIELDNAME = 'WERKS'.
WA_FIELDCAT2-TABNAME = 'IT_MARC'.
WA_FIELDCAT2-SELTEXT_L = 'PLANT'.
WA_FIELDCAT2-COL_POS = 2.
WA_FIELDCAT2-OUTPUTLEN = 4.
APPEND WA_FIELDCAT2 TO IT_FIELDCAT2.
CLEAR WA_FIELDCAT2.
WA_FIELDCAT2-FIELDNAME = 'LADGR'.
WA_FIELDCAT2-TABNAME = 'IT_MARC'.
WA_FIELDCAT2-SELTEXT_L = 'LOAD GRP'.
WA_FIELDCAT2-COL_POS = 3.
WA_FIELDCAT2-OUTPUTLEN = 4.
APPEND WA_FIELDCAT2 TO IT_FIELDCAT2.
CLEAR WA_FIELDCAT2.
WA_FIELDCAT2-FIELDNAME = 'MTVFP'.
WA_FIELDCAT2-TABNAME = 'IT_MARC'.
WA_FIELDCAT2-SELTEXT_L = 'GRP CHK'.
WA_FIELDCAT2-COL_POS = 4.
WA_FIELDCAT2-OUTPUTLEN = 4.
APPEND WA_FIELDCAT2 TO IT_FIELDCAT2.
CLEAR WA_FIELDCAT2.
WA_FIELDCAT2-FIELDNAME = 'DISPR'.
WA_FIELDCAT2-TABNAME = 'IT_MARC'.
WA_FIELDCAT2-SELTEXT_L = 'MRP PROFILE'.
WA_FIELDCAT2-COL_POS = 5.
WA_FIELDCAT2-OUTPUTLEN = 4.
APPEND WA_FIELDCAT2 TO IT_FIELDCAT2.
CLEAR WA_FIELDCAT2.
WA_FIELDCAT2-FIELDNAME = 'DISMM'.
WA_FIELDCAT2-TABNAME = 'IT_MARC'.
WA_FIELDCAT2-SELTEXT_L = 'MRP TYPE'.
WA_FIELDCAT2-COL_POS = 6.
WA_FIELDCAT2-OUTPUTLEN = 4.
APPEND WA_FIELDCAT2 TO IT_FIELDCAT2.
CLEAR WA_FIELDCAT2.
WA_FIELDCAT2-FIELDNAME = 'DISPO'.
WA_FIELDCAT2-TABNAME = 'IT_MARC'.
WA_FIELDCAT2-SELTEXT_L = 'MRP CON'.
WA_FIELDCAT2-COL_POS = 7.
WA_FIELDCAT2-OUTPUTLEN = 4.
APPEND WA_FIELDCAT2 TO IT_FIELDCAT2.
CLEAR WA_FIELDCAT2.
ENDFORM.                    " modify_fieldcat
*&      Form BLOCK_LIST
      text
--> p1        text
<-- p2        text
FORM BLOCK_LIST .
CLEAR WA_LAYOUT.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-TOTALS_TEXT = 'TOTAL'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    I_CALLBACK_PROGRAM             = G_REPID
   I_CALLBACK_PF_STATUS_SET       = ' '
   I_CALLBACK_USER_COMMAND        = 'user_command'.
IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    IS_LAYOUT                        = WA_LAYOUT
    IT_FIELDCAT                      = IT_FIELDCAT[]
    I_TABNAME                        = 'IT_MARA'
    IT_EVENTS                        = GT_XEVENTS
   IT_SORT                          = IT_SORT
I_TEXT                           = ' '
TABLES
    T_OUTTAB                         = IT_MARA
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    IS_LAYOUT                        = WA_LAYOUT
    IT_FIELDCAT                      = IT_FIELDCAT1
    I_TABNAME                        = 'IT_MAKT'
    IT_EVENTS                        = GT_YEVENTS
IT_SORT                          =
I_TEXT                           = ' '
TABLES
    T_OUTTAB                         = IT_MAKT
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    IS_LAYOUT                        = WA_LAYOUT
    IT_FIELDCAT                      = IT_FIELDCAT2
    I_TABNAME                        = 'IT_MARC'
    IT_EVENTS                        = GT_ZEVENTS
IT_SORT                          =
I_TEXT                           = ' '
TABLES
    T_OUTTAB                         = IT_MARC
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK             = ' '
   IS_PRINT                      = GT_PRINT
I_SCREEN_START_COLUMN         = 0
I_SCREEN_START_LINE           = 0
I_SCREEN_END_COLUMN           = 0
I_SCREEN_END_LINE             = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER       =
ES_EXIT_CAUSED_BY_USER        =
EXCEPTIONS
PROGRAM_ERROR                 = 1
OTHERS                        = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " BLOCK_LIST
*&      Form EVENT_LIST
      text
--> p1        text
<-- p2        text
FORM EVENT_LIST .
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENT-FORM = 'XTOP_OF_PAGE'.
APPEND XS_EVENT TO GT_XEVENTS.
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_END_OF_PAGE.
XS_EVENT-FORM = 'XEND_OF_PAGE'.
APPEND XS_EVENT TO GT_XEVENTS.
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
XS_EVENT-FORM = 'XTOP_OF_LIST'.
APPEND XS_EVENT TO GT_XEVENTS.
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_END_OF_LIST.
XS_EVENT-FORM = 'XEND_OF_LIST'.
APPEND XS_EVENT TO GT_XEVENTS.
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_END_OF_PAGE.
XS_EVENT-FORM = 'YEND_OF_PAGE'.
APPEND XS_EVENT TO GT_YEVENTS.
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENT-FORM = 'YTOP_OF_PAGE'.
APPEND XS_EVENT TO GT_YEVENTS.
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
XS_EVENT-FORM = 'YTOP_OF_LIST'.
APPEND XS_EVENT TO GT_YEVENTS.
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_END_OF_LIST.
XS_EVENT-FORM = 'YEND_OF_LIST'.
APPEND XS_EVENT TO GT_YEVENTS.
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_END_OF_PAGE.
XS_EVENT-FORM = 'ZEND_OF_PAGE'.
APPEND XS_EVENT TO GT_ZEVENTS.
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENT-FORM = 'ZTOP_OF_PAGE'.
APPEND XS_EVENT TO GT_ZEVENTS.
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
XS_EVENT-FORM = 'ZTOP_OF_LIST'.
APPEND XS_EVENT TO GT_ZEVENTS.
CLEAR XS_EVENT.
XS_EVENT-NAME = SLIS_EV_END_OF_LIST.
XS_EVENT-FORM = 'ZEND_OF_LIST'.
APPEND XS_EVENT TO GT_ZEVENTS.
CLEAR XS_EVENT.
ENDFORM.                    " EVENT_LIST
FORM XTOP_OF_PAGE.
WRITE:/ 'TOP OF PAGE FOR MARA'.
ENDFORM.
FORM YTOP_OF_PAGE.
WRITE:/ 'TOP OF PAGE FOR MAKT'.
ENDFORM.
FORM ZTOP_OF_PAGE.
WRITE:/ 'TOP OF PAGE FOR MARC'.
ENDFORM.
FORM XEND_OF_PAGE.
WRITE:/ 'END OF PAGE FOR MARA'.
ENDFORM.
FORM YEND_OF_PAGE.
WRITE:/ 'END OF PAGE FOR MAKT'.
ENDFORM.
FORM ZEND_OF_PAGE.
WRITE:/ 'END OF PAGE FOR MARC'.
ENDFORM.
FORM XTOP_OF_LIST.
WRITE:/ 'TOP OF LIST FOR MARA'.
ENDFORM.
FORM YTOP_OF_LIST.
WRITE:/ 'TOP OF LIST FOR MAKT'.
ENDFORM.
FORM ZTOP_OF_LIST.
WRITE:/ 'TOP OF LIST FOR MARC'.
ENDFORM.
FORM XEND_OF_LIST.
WRITE:/ 'END OF LIST FOR MARA'.
ENDFORM.
FORM YEND_OF_LIST.
WRITE:/ 'END OF LIST FOR MAKT'.
ENDFORM.
FORM ZEND_OF_LIST.
WRITE:/ 'END OF LIST FOR MARC'.
ENDFORM.
*&      Form sort_list
      text
--> p1        text
<-- p2        text
FORM sort_list .
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'MTART'.
WA_SORT-SUBTOT = 'X'.
    APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'MATKL'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
ENDFORM.                    " sort_list
regards,
keerthi

Reg: SPAU modification

Hi,
Can any one explain How to repair(Without Modification Assistant) Transaction Variants, Screen Variants and documentation in SPAU transaction
Regards,
Ram

Hi,
Please go through the OSS note 546801 for all your questions on SPAU.
Reward if helpfull.
Regards,
Imran

Reg. Lists

Hi every body,
I'm developing a list.
In that, If I double click, It should add some more information on the same list only.
and if it's possible give me reply for splitting the screens also.
Useful answers will be rewarded greatly.
Thanks in advance.
Jagan.

hi jagan
DATA: KUNNR TYPE KNA1-KUNNR.
DATA : ITAB TYPE KNA1 OCCURS 0 WITH HEADER LINE.
SELECT * FROM KNA1 INTO TABLE ITAB UP TO 10 ROWS.
START-OF-SELECTION.
LOOP AT ITAB.
   WRITE:/ ITAB-KUNNR.
   HIDE ITAB-KUNNR.
ENDLOOP.
PERFORM FFF.
AT LINE-SELECTION.
*IF SY-LSIND = 1.
KUNNR = ITAB-KUNNR.
PERFORM FFF.
ITAB-KUNNR = KUNNR.
SY-LSIND = 0.
READ TABLE ITAB WITH KEY KUNNR = ITAB-KUNNR.
WRITE:/ ITAB-NAME1.
*ENDIF.
*&      Form FFF
      text
--> p1        text
<-- p2        text
FORM FFF .
LOOP AT ITAB.
    WRITE:/ ITAB-KUNNR.
    HIDE ITAB-KUNNR.
ENDLOOP.
ENDFORM.                    " FFF

REG- Deacivating listing/exclusion

Hi all,
We created a record with few materials listed for a customer in VD01. Now we want it to be de-activated. I tried using VD02 and deleted the material in listing, but it in turn is not allowing any material from getting used in the sales order. I have searched the forum for an answer. pls help me.
Thanks in advance

I hope it is VB01.
If you do not want listing and exclusion for perticular customer you have to delete the condition records in VB02.
If you want to deactivate entire listing exclusion for that sales document type then you have to remove the assignment in Basic functions.
Path : SPRO-Sales and Distribution-Basic Functions- Listing and Exclusion-Activate listing/exclusion by sales document type.

Reg Refine List Options

Hi
When i click on My Service Requests List and then Click on Refine Lists "Search In" option is defaulting to "All Records i can see" ideally as this list is My service Requests , The "Search in" Option should default to "All Records i Own". Is there a way in which this default value can be changed.
Any Pointers for the same would be highly appreciated.
Thank you.

At this time the default of "All records I can see" can not be changed. I would recommend submitting a SR enhancement request.

Reg Interactive list

Hi,
From Detailed list 6 , by pressing back how will you go to detailed list 3 ? And what event will trigger when you press back.?
Thanks,
Sudhan.

Hi
You have to write some code to come to List 3 from list 6
IF SY-LSIND = 6.
SY-LSIND = 3.
ENDIF.
when you press BACK , you will come to the previous screen from where you have gone to this new screen/list.
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Reg ALV List output save

Hi All,
I have developed a report using ALV Grid but I want save the layout with some variant name but by default the option setting->Layout->save is disabled how to enable this?.
Thanks&Regards
Mahesh

Hi Mahesh,
set I_SAVE with 'A'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM      = PROGNAME
            I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
            IS_LAYOUT               = LAYOUT
            IT_FIELDCAT             = FIELDCAT
<b>            I_SAVE                  = 'A'</b>
            IT_EVENTS               = GT_EVENTS
            IT_EVENT_EXIT           = EVENT
            IS_PRINT                = PRINT
       TABLES
            T_OUTTAB                = IT_MARA
       EXCEPTIONS
            PROGRAM_ERROR           = 1
            OTHERS                  = 2.
regards, Dieter

Reg SPAU list

Similar Messages

Maybe you are looking for