Reg. special GL indicators and the field status - urgent !
Hi all,
we use many Special GL indicators. The problem is the screen changes when we make an entry with different special GL indicators though the accounts which are assigned in the config for the special GL have the same FSG.
Can you guide us as to what is the reason for the change in the field status and how to make it uniform? or which holds priority ?
Regards
Karpagam
Hi
Field status of the accounts you have defined in FBKP, depend uopn the FSG assigned to Reco account. That means FGS of Reco account will prevail while entering document for the account to which said Reco account is assigned
eg for account xxxx, reco account is yyyy, then FSG of yyyy will work.
If you have different reco accounts for different accounts having same FSG, screen will definelty change.
check FSG for Reco accounts
hope this helps
pushkaraj
Similar Messages
-
I can't change the field status of Tax section in MIRO transaction
Hello, I need to change to visible the field status of RTAX1U12-FWBAS, RTAX1U12-HWSTE and RTAX1U12-HWBAS of Tax section in MIRO transaction. In table settings, administrator option of that section I can change them, but when I save the variant the system do not save the settings. There is another transaction where these field status are maintained? I think that in another part these fields have the status "Invisible".
Best regards,
Alfredo Del PortilloHola Alfredo,
The table control for taxes in MIRO cannot be changed by the administrator function like other table controls.
Which columns are displayed or not is decided by the program dependend on several parameters.
The tax base amount is changeable or not is controlled by a setting in FI customizing:
IMG -> Financial Accounting -> F.A. Global Settings -> Tax on Sales/Pur
-> Basic Settings -> Change field control for Tax base amount
I hope the above information answers your inquiry.
Xalu2
Mauro -
please i have ordered for Bottom Case of white macbook (late 2009)for over 2 months now and the repair status is still processing. is dat normal? i really need the bottom case asap, how can i get it
Call Apple. Contact Apple for support and service
This is a user to user forum, we don't work for Apple. -
What version of iPhoto. iPhoto 11 9.4.3 (720.91)
What version of the Operating System. OSX 10.8.3
Detail. I Attach my camera and the fields where the photos usually show up are empty and at the top of the screen it says all photos from camera are downloaded. But they are not. They can't be.
I fixed the problem somewhat myself by removing the miniSD and manually inserting it. It did not populate automatically. I had to open iPhoto and then it populated only the most recent photos I had taken which fortunately were the only ones I need. No error messages this seems to be a new occurrence.
Is there a way to just turn iPhoto off and download my photos to the folder of my own choosing?Sure - in the iPhoto prefercences set action when a camera is ocnnected to Image Capture
LN
Note - your cute formatting really does not add anything and makes your post hard to read and follow - try straight typing with no cute formatting in the future -
Mapping and Monitoring all the User and the Field exits
Hello Dears,
Are possible, with the Solution Manager to map and monitor all the user and the field exists existing in my ECC6 Productivity Environment?
Anyone has some documentation?
Regards to all.
FS.Hello Gurus,
Someone has any information about this question?
Regards to all.
FS. -
I need to know the name of the database table and the fields in that table
hi,
i need to I need to know the name of the database table and the fields in that table for the following fields of the front end .
1) incident details.
2) ownership details
3) injury type
4) % of investigation completed withen 7 days.
5) count of incident type
6) cost of workers compensation claim.
7) injury resulting from for workers compensation claim
8) investigation free text.
9) investigation contribution factors.
10) investigation root cause.
11) investigation root cause free text
12) employee risk assesment
13) protential infrigment notice issued
14) actual infrigment notice issued.
15) actual infrigment notice reference number.
16)vehicle damaged text.
18) when the incident occured.
thanks and regards,
pronoy .Hello,
Check CCIHT* under se16 and search for relevant information
Thanks
Jayakumar -
In transaction scase, where is the field 'status' stored ?
Hi
in transaction scase, where is the field 'status' stored (in Hdr. data), for a specific BP ?
thx.
Edited by: avijit saxena on Nov 12, 2008 10:10 PMtable>srmprotocol>filter on [ACT_ID] 'attribute change'>choose colom 'arg_string'->filter on 'stat_orderno'
-
Adding an addition feilds n the field status group
Hi all
I want to know, how to add a new field in the in the field status.
e.g.
in the standard feild status group G001 we have fields namely general data, material managenment,addition account assignment,ect
In additional account assignment i want to add some new feilds like Charges,dimension,etc. apart from the standard fields like Fund Center,Commitment item,Cost center
But when i checked,their is no provission for adding the new fields.
Can any one help out in this regard.......
Its a urgent requirment ............
Thnx
Regards
PraeenHi
You have to extend the coding block of the BSEG table with the required fields.
You can then use there fields in the field status
Regards
Ole -
How to change the field status of "plant" of standard activity ?
hi,dear all:
I want to know how to specify the field status of "plant" of standard activity from "ready for input" to "required entry".
Can the field of the stand network be changed?
Thanks.Hi,
Try in T-code OPN6
Regards, -
Exact difference between System status and the user status
Hi,
Please tell me the exact difference between System status and the user status .
how we customize the both in the system
Thanks & Regards
Prajith P
Moderation: Locked. Please, try to find an answer first. See rules of engagement
Edited by: Joaquin Fornas on Feb 23, 2012 11:14 AMHi,
As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
System statuses will be updated automatically based on business transactions which will be done on SAP.
For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
These user status as per the name, should be updated by the user manually.
Regards,
Maheswaran. -
Error: Validation failed for the field - Status While creating Sales Order
Hi,
I am getting an error while trying to create sales order header.
I have tried using provided in the metalink as well but it still doesn't seem to work.
I am on R12.1.1
Can somebody help me out on this?
The code is
set serveroutput on
DECLARE
l_header_rec OE_ORDER_PUB.Header_Rec_Type;
l_header_rec1 OE_ORDER_PUB.Header_Rec_Type;
l_line_tbl OE_ORDER_PUB.Line_Tbl_Type;
l_line_tbl1 OE_ORDER_PUB.Line_Tbl_Type;
l_action_request_tbl OE_ORDER_PUB.Request_Tbl_Type;
l_header_adj_tbl OE_ORDER_PUB.Header_Adj_Tbl_Type;
l_line_adj_tbl OE_ORDER_PUB.line_adj_tbl_Type;
l_header_scr_tbl OE_ORDER_PUB.Header_Scredit_Tbl_Type;
l_line_scredit_tbl OE_ORDER_PUB.Line_Scredit_Tbl_Type;
l_request_rec OE_ORDER_PUB.Request_Rec_Type ;
l_return_status VARCHAR2(1000);
l_msg_count NUMBER;
l_msg_data VARCHAR2(1000);
p_api_version_number NUMBER :=1.0;
p_init_msg_list VARCHAR2(10) := FND_API.G_FALSE;
p_return_values VARCHAR2(10) := FND_API.G_FALSE;
p_action_commit VARCHAR2(10) := FND_API.G_FALSE;
x_return_status VARCHAR2(1);
x_msg_count NUMBER;
x_msg_data VARCHAR2(100);
p_header_rec OE_ORDER_PUB.Header_Rec_Type := OE_ORDER_PUB.G_MISS_HEADER_REC;
p_old_header_rec OE_ORDER_PUB.Header_Rec_Type := OE_ORDER_PUB.G_MISS_HEADER_REC;
p_header_val_rec OE_ORDER_PUB.Header_Val_Rec_Type := OE_ORDER_PUB.G_MISS_HEADER_VAL_REC;
p_old_header_val_rec OE_ORDER_PUB.Header_Val_Rec_Type := OE_ORDER_PUB.G_MISS_HEADER_VAL_REC;
p_Header_Adj_tbl OE_ORDER_PUB.Header_Adj_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_TBL;
p_old_Header_Adj_tbl OE_ORDER_PUB.Header_Adj_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_TBL;
p_Header_Adj_val_tbl OE_ORDER_PUB.Header_Adj_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_VAL_TBL;
p_old_Header_Adj_val_tbl OE_ORDER_PUB.Header_Adj_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_VAL_TBL;
p_Header_price_Att_tbl OE_ORDER_PUB.Header_Price_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_PRICE_ATT_TBL;
p_old_Header_Price_Att_tbl OE_ORDER_PUB.Header_Price_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_PRICE_ATT_TBL;
p_Header_Adj_Att_tbl OE_ORDER_PUB.Header_Adj_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_ATT_TBL;
p_old_Header_Adj_Att_tbl OE_ORDER_PUB.Header_Adj_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_ATT_TBL;
p_Header_Adj_Assoc_tbl OE_ORDER_PUB.Header_Adj_Assoc_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_ASSOC_TBL;
p_old_Header_Adj_Assoc_tbl OE_ORDER_PUB.Header_Adj_Assoc_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_ASSOC_TBL;
p_Header_Scredit_tbl OE_ORDER_PUB.Header_Scredit_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_SCREDIT_TBL;
p_old_Header_Scredit_tbl OE_ORDER_PUB.Header_Scredit_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_SCREDIT_TBL;
p_Header_Scredit_val_tbl OE_ORDER_PUB.Header_Scredit_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_SCREDIT_VAL_TBL;
p_old_Header_Scredit_val_tbl OE_ORDER_PUB.Header_Scredit_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_SCREDIT_VAL_TBL;
p_line_tbl OE_ORDER_PUB.Line_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_TBL;
p_old_line_tbl OE_ORDER_PUB.Line_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_TBL;
p_line_val_tbl OE_ORDER_PUB.Line_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_VAL_TBL;
p_old_line_val_tbl OE_ORDER_PUB.Line_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_VAL_TBL;
p_Line_Adj_tbl OE_ORDER_PUB.Line_Adj_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_TBL;
p_old_Line_Adj_tbl OE_ORDER_PUB.Line_Adj_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_TBL;
p_Line_Adj_val_tbl OE_ORDER_PUB.Line_Adj_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_VAL_TBL;
p_old_Line_Adj_val_tbl OE_ORDER_PUB.Line_Adj_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_VAL_TBL;
p_Line_price_Att_tbl OE_ORDER_PUB.Line_Price_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_PRICE_ATT_TBL;
p_old_Line_Price_Att_tbl OE_ORDER_PUB.Line_Price_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_PRICE_ATT_TBL;
p_Line_Adj_Att_tbl OE_ORDER_PUB.Line_Adj_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_ATT_TBL;
p_old_Line_Adj_Att_tbl OE_ORDER_PUB.Line_Adj_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_ATT_TBL;
p_Line_Adj_Assoc_tbl OE_ORDER_PUB.Line_Adj_Assoc_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_ASSOC_TBL;
p_old_Line_Adj_Assoc_tbl OE_ORDER_PUB.Line_Adj_Assoc_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_ASSOC_TBL;
p_Line_Scredit_tbl OE_ORDER_PUB.Line_Scredit_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_TBL;
p_old_Line_Scredit_tbl OE_ORDER_PUB.Line_Scredit_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_TBL;
p_Line_Scredit_val_tbl OE_ORDER_PUB.Line_Scredit_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_VAL_TBL;
p_old_Line_Scredit_val_tbl OE_ORDER_PUB.Line_Scredit_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_VAL_TBL;
p_Lot_Serial_tbl OE_ORDER_PUB.Lot_Serial_Tbl_Type := OE_ORDER_PUB.G_MISS_LOT_SERIAL_TBL;
p_old_Lot_Serial_tbl OE_ORDER_PUB.Lot_Serial_Tbl_Type := OE_ORDER_PUB.G_MISS_LOT_SERIAL_TBL;
p_Lot_Serial_val_tbl OE_ORDER_PUB.Lot_Serial_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LOT_SERIAL_VAL_TBL;
p_old_Lot_Serial_val_tbl OE_ORDER_PUB.Lot_Serial_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LOT_SERIAL_VAL_TBL;
p_action_request_tbl OE_ORDER_PUB.Request_Tbl_Type := OE_ORDER_PUB.G_MISS_REQUEST_TBL;
x_header_val_rec OE_ORDER_PUB.Header_Val_Rec_Type;
x_Header_Adj_tbl OE_ORDER_PUB.Header_Adj_Tbl_Type;
x_Header_Adj_val_tbl OE_ORDER_PUB.Header_Adj_Val_Tbl_Type;
x_Header_price_Att_tbl OE_ORDER_PUB.Header_Price_Att_Tbl_Type;
x_Header_Adj_Att_tbl OE_ORDER_PUB.Header_Adj_Att_Tbl_Type;
x_Header_Adj_Assoc_tbl OE_ORDER_PUB.Header_Adj_Assoc_Tbl_Type;
x_Header_Scredit_tbl OE_ORDER_PUB.Header_Scredit_Tbl_Type;
x_Header_Scredit_val_tbl OE_ORDER_PUB.Header_Scredit_Val_Tbl_Type;
x_line_val_tbl OE_ORDER_PUB.Line_Val_Tbl_Type;
x_Line_Adj_tbl OE_ORDER_PUB.Line_Adj_Tbl_Type;
x_Line_Adj_val_tbl OE_ORDER_PUB.Line_Adj_Val_Tbl_Type;
x_Line_price_Att_tbl OE_ORDER_PUB.Line_Price_Att_Tbl_Type;
x_Line_Adj_Att_tbl OE_ORDER_PUB.Line_Adj_Att_Tbl_Type;
x_Line_Adj_Assoc_tbl OE_ORDER_PUB.Line_Adj_Assoc_Tbl_Type;
x_Line_Scredit_tbl OE_ORDER_PUB.Line_Scredit_Tbl_Type;
x_Line_Scredit_val_tbl OE_ORDER_PUB.Line_Scredit_Val_Tbl_Type;
x_Lot_Serial_tbl OE_ORDER_PUB.Lot_Serial_Tbl_Type;
x_Lot_Serial_val_tbl OE_ORDER_PUB.Lot_Serial_Val_Tbl_Type;
x_action_request_tbl OE_ORDER_PUB.Request_Tbl_Type;
X_DEBUG_FILE VARCHAR2(100);
l_line_tbl_index NUMBER;
l_msg_index_out NUMBER(10);
BEGIN
oe_debug_pub.debug_on;
DBMS_APPLICATION_INFO.set_client_info (121);
dbms_output.enable(1000000);
fnd_global.apps_initialize(2787,50703,660); -- pass in user_id, responsibility_id, and application_id
oe_msg_pub.initialize;
oe_debug_pub.initialize;
MO_GLOBAL.init('ONT');
X_DEBUG_FILE := OE_DEBUG_PUB.Set_Debug_Mode('FILE');
oe_debug_pub.SetDebugLevel(5); -- Use 5 for the most debuging output, I warn you its a lot of data
dbms_output.put_line('START OF NEW DEBUG');
--This is to CREATE an order header and an order line
--Create Header record
--Initialize header record to missing
l_header_rec := OE_ORDER_PUB.G_MISS_HEADER_REC;
l_header_rec.pricing_date := SYSDATE;
l_header_rec.sold_to_org_id := 2096;
l_header_rec.ordered_date := SYSDATE;
l_header_rec.sold_from_org_id := 121 ;
l_header_rec.salesrep_id := -3;
l_header_rec.order_type_id := 1003;
l_header_rec.operation := OE_GLOBALS.G_OPR_CREATE;
l_line_tbl_index :=1;
-- FIRST LINE RECORD
-- Initialize record to missing
l_line_tbl(l_line_tbl_index) := OE_ORDER_PUB.G_MISS_LINE_REC;
-- Line attributes
l_line_tbl(l_line_tbl_index).inventory_item_id := 124516;
l_line_tbl(l_line_tbl_index).ordered_quantity := 500;
l_line_tbl(l_line_tbl_index).ship_from_org_id := 563;
l_line_tbl(l_line_tbl_index).operation := OE_GLOBALS.G_OPR_CREATE;
-- CALL TO PROCESS ORDER Check the return status and then commit.
OE_ORDER_PUB.process_order (
p_api_version_number => 1.0
, p_init_msg_list => fnd_api.g_false
, p_return_values => fnd_api.g_false
, p_action_commit => fnd_api.g_false
, x_return_status => l_return_status
, x_msg_count => l_msg_count
, x_msg_data => l_msg_data
, p_header_rec => l_header_rec
, p_line_tbl => l_line_tbl
, p_action_request_tbl => l_action_request_tbl
-- OUT PARAMETERS
, x_header_rec => l_header_rec1
, x_header_val_rec => x_header_val_rec
, x_Header_Adj_tbl => x_Header_Adj_tbl
, x_Header_Adj_val_tbl => x_Header_Adj_val_tbl
, x_Header_price_Att_tbl => x_Header_price_Att_tbl
, x_Header_Adj_Att_tbl => x_Header_Adj_Att_tbl
, x_Header_Adj_Assoc_tbl => x_Header_Adj_Assoc_tbl
, x_Header_Scredit_tbl => x_Header_Scredit_tbl
, x_Header_Scredit_val_tbl => x_Header_Scredit_val_tbl
, x_line_tbl => l_line_tbl1
, x_line_val_tbl => x_line_val_tbl
, x_Line_Adj_tbl => x_Line_Adj_tbl
, x_Line_Adj_val_tbl => x_Line_Adj_val_tbl
, x_Line_price_Att_tbl => x_Line_price_Att_tbl
, x_Line_Adj_Att_tbl => x_Line_Adj_Att_tbl
, x_Line_Adj_Assoc_tbl => x_Line_Adj_Assoc_tbl
, x_Line_Scredit_tbl => x_Line_Scredit_tbl
, x_Line_Scredit_val_tbl => x_Line_Scredit_val_tbl
, x_Lot_Serial_tbl => x_Lot_Serial_tbl
, x_Lot_Serial_val_tbl => x_Lot_Serial_val_tbl
, x_action_request_tbl => l_action_request_tbl
dbms_output.put_line('OM Debug file: ' ||oe_debug_pub.G_DIR||'/'||oe_debug_pub.G_FILE);
oe_debug_pub.debug_off;
-- Retrieve messages
FOR i IN 1 .. l_msg_count
LOOP
Oe_Msg_Pub.get( p_msg_index => i
, p_encoded => Fnd_Api.G_FALSE
, p_data => l_msg_data
, p_msg_index_out => l_msg_index_out);
DBMS_OUTPUT.PUT_LINE('message is: ' || l_msg_data);
DBMS_OUTPUT.PUT_LINE('message index is: ' || l_msg_index_out);
END LOOP;
-- Check the return status
IF l_return_status = FND_API.G_RET_STS_SUCCESS
THEN
dbms_output.put_line('Process Order Sucess');
dbms_output.put_line('new Header id:' || l_header_rec1.header_id);
ELSE
dbms_output.put_line('Failed');
END IF;
Commit;
END; Regards
knickKinck
The same script worked for me in vision (R12.1). You may have issues with your defaulting of a number of attributes that you are not passing in the API (like price list, line type and so on). You may want to check them.
Thanks
Nagamohan -
Hello Friends,
To display the field on the View, we can create the field via 3 ways:
1) By creating the model attribute
2) By creating the model node using the GENIL object and using its attributes in view
3) Creating the field in Database structure using AET
But, i am not aware that in exactly what kind of business scenarios we use the above 3 methods to create the field.
Could you help me out to clarify the same.Hi Dev,
1). By creating the model attribute: we will use this option in case of the field is avaibla in stanadrd sap system. It might be in another under child context nodes and we will use BOL relations to access the attribute.
2). By creating the model node using the GENIL object and using its attributes in view: We will use this option incase of there is no standard provision to use. Means you want to create any custom assignment block with custom attributes then you can go for this option. More over we can use AET to create custom genil object. We have an option Create Table in AET.
3).Creating the field in Database structure using AET: We will use this option incase of there is no attribute in database relevant to your requirement then we will go for AET enhancement.
Hope this might give you little clarification..
Best Regards,
Dharmakasi. -
Reflection and the field.set method
OK, I've made 2 classes, a ClearParent and ClearChild (which extends ClearParent). I'd like to have a "clear" method on the parent which dynamically sets all the fields to null. I'd like to be able to have any child that inherits from the parent be able to call clear and dynamically have all it's fields set to null.
Part of the restriction that I'm facing is that the fields are Objects (Integer) but the getter and setter methods take and return types (int). So I can't just loop through the Methods and call the setters with null.
I'd like to be able to loop through the fields and call set for all the fields with the parent class.
I'm inserting the code that I have for the parent and child classes at the end. Basically, the problem that I'm seeing is that if I do a
this.getClass().getName()
from the parent (when clear is called from the child) it shows me the child name ("ClearChild"). But when I try to do the
field.set(this, null)
it tells me this:
Class ClearParent can not access a member of class
ClearChild with modifiers "private"
How come when I get the name it tells me that it's the child but when I pass "this" to the set method, it says that it's the parent?
Any one know what's going on here? Is there anyway that I can have the parent set all the fields to null?
Thanks in advance.
Here's the code:
ClearParent
import java.lang.reflect.*;
public class ClearParent {
public boolean clear() {
try {
System.out.println(this.getClass().getName());
Field[] fields = this.getClass().getDeclaredFields();
Field field;
for (int i = 0; i < fields.length; i++) {
field = fields;
field.set(this, null);
} catch (Exception e) {
e.printStackTrace();
return true;
ClearChild
public class ClearChild extends ClearParent {
private Float f;
public ClearChild() {
super();
public float getF() {
if (f == null) {
return 0;
return f.floatValue();
public void setF(float f) {
this.f = new Float(f);
public static void main (String[] args) throws Exception {
ClearChild cc = new ClearChild();
cc.setF(23);
cc.clear();
System.out.println("cc.getF: " + cc.getF());It is an instance of ClearChild that is being used so
that class name is ClearChild. However, the method
exists in the parent class and thus cannot act upon a
private field of another class (even if it happens to
be a subclass).Ahh...makes sense.
Why don't you just override clear in the child?We were trying to avoid this because we run into problems in the past of people adding fields to the class, but not adding to the clear, and things not being cleared properly.
I talked it over with the guys here and they have no problem making the fields protected instead of private. If it's protected, then the parent has access to it and my sample code works.
Thanks for your help KPSeal!
Jes -
Budget controle and the field Overall Limit in a PO
When we are making a budget from 50.000 in CO and creating a PO for 100 then in the the PO tab Limits you see Expected value 100.
When you fill in the field overall Limit 100.000. It is possible to post a value from 100.000 even when the budget in conrolling is 50.000. How we can set it up that this is no longer possible.
Edited by: Paul Annotee on Mar 12, 2009 10:28 AMHi,
You have to Define Tolerance limits for your budget profile and activate the availability control in KO30. Please see the below path for define tolerance.
Controlling -
>Internal Orders--->Budgeting and Availability Control-->Define Tolerance Limits for Availability Control.
Regards
Sudharsan.R -
Add new trigger and the Enabled status is false
Hello, I'm very new to Cisco and UCCX. We have version 8.5.1 CME I added a new trigger but the enabled status is false. thanks, Dan
Hi Dan,
What is your deployment UCCX with CME or UCCX with CUCM?
JTAPI Resync and Data Resyn operation come in UCCX with CUCM deployment. JTAPI Resyn opeation does JTAPI client sync between CUCM and UCCX, and Data Resyncoperation syncs the Application User, Route Points, CTI ports between CUCM and UCCX..
UCCX and CME sync\check operation checks the consitent data between UCCX and CME and falgs the inconsistent data in Red colour.
Please try performing during the maintainance hours.
Thanks,
Anand
Please rate helpful posts by clicking on the stars below the right answers !!
Maybe you are looking for
-
I ahve purchased 5 music vidoes from iTunes and they will not play on my iPhone4. The error message that appears is: "The requested URL was not fopund on this server" I am not sure how to fix this so I can watch my videos?
-
How to change the typewriter's font
Hello support, The default font for typewriter is Courier 9 and I would like to change it Times Roman or Ariel. I have Adobe version 9.5 and Windows 7. Thanks Jamshid
-
I have hit with above error and the code did run successfully before the minor change in the portion I have bolded. Appreciate your comment & help. Attached with the code: CREATE TABLE RPT1120B_CHANNEL_new (SUBSCRIBER_NO NUMBER (9), FP_CHANNEL VARCHA
-
MSSQL Stored procedure : only one command executed
For a MSSQL Stored Procedure, We have used this Solution1: Just put SET NOCOUNT OFF in the end of the stored procedure. After that run the stored procedure in the Desktop Intelligence report. Or If the above doesnu2019t works then please try the foll
-
When playing songs on my ipod the tracks begin 21 seconds into the song
Something weird is going on with my 3rd gen iPod Touch (32gb). When I play music, very often I run into a problem where all or most of the tracks in an album will begin playing 21 seconds into a song. For instance, I might select the first track in a