Reg Structures in Query Designer

Hi,
Can someone explain the following regarding Structures usage in Query Designer
1. Limitations of Structures usage
2. When to use Structures and when not to use them in Query Designer
Thanks in Advance
Regards
AVS Reddy

Hi,
Structures in Query designer are reusable across all the queries for particular info provider once you save in the query designer.
Also check the below links for more info:
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Reg
Pra

Similar Messages

  • How to create two structures in query designer?

    Hi experts,
    I got the requirement to create 2 structures in query designer , as far as i concern i got to know that there will be chance to create on one for char and other for key figure,
    is their any chance to create 2 structures on key figures.
    If possible please help me in that.
    Thanks in Advance
    vas

    Hi,
    in Query at a time only 2 structures can be used, even thought there are many structures created on that infoprovider.
    [http://help.sap.com/erp2005_ehp_03/helpdata/EN/4d/e2bebb41da1d42917100471b364efa/content.htm]

  • Creating Structure in Query Designer

    Hi All,
    I created one Balance sheet report based on Remotecube 0FIGL_R10.
    In Query designer i created one  structure under that i defined  Asset , Liability , Cash , Account Receivables , Inventory like that. and each of them are restricted by G/L Account . in keyfigure i have Balance. Now when i tried to run the report it doesnot show me result. while data are existing in to Remote cube.
    Did i forget any settings in designer or If i create structure in BEx then do i have to set any properties please let me know.
    Regards,
    BI NEW

    Hi,
    Thanks for reply.
    ." Presence of structure is not the hindrance for query output."
    . Can you explain me why structure is not hindrance  for query output ?
    " Check the remote cube connectivity with the source."
        How to check remotecube connectivity with source ?
    .Regards,
    BI NEW

  • BI query designer

    Hi,
         Could any one pls tell me what is the use of 'structures' in query designer?

    Hi,
    Everything about structures is clearly explained in the link below..
    http://help.sap.com/saphelp_nw04/helpdata/en/4d/e2bebb41da1d42917100471b364efa/frameset.htm
    -Pradnya

  • Problem with Queries Structures in Bex Query Designer and Universe Designer

    Hi everyone,
    I have a problem when i try to do a Universe from a Bex Query Designer.
    When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
    EJ:
    1) Bex Query Designer
    Colunms
    (Structure) ZSRT_123
                          - (Characteristic Restrictions) Reg Guayana
    >          (InfoObject)     0Product = 'XXX'
    >          (InfoObject)     0Country = 'YYY'
         - (Characteristic Restrictions) Reg Caracas
    >          (InfoObject)     0Product = 'AAA'
    >          (InfoObject)     0Country = 'BBB'
    Rows
    (Structure) ZSRT_456
                   (Key Figure)     Net Sales
    2) Universe designer
    (Class) ZSRT_456
    >(Measure)      Net Sale
    (Class)     ZSRT_123
    >(Dimension)      ZSRT_123
    The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
    Any information would be much appreciated. Thank you.

    Hi,
    I assume that you are using BOE XI 3.1 SP2.
    We have added an option in SP2 to generate or not the L00 level.
    Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
    I recommend to always generate L00 in order to have your structure generated correctly.
    This issue will be fixed in SP3.
    Regards,
    Didier

  • Structure copy in BEx query Designer?

    I created structure in BEx Query Designer in BI PRD which is our BI production system.
    I'd like to copy structure to BI DEV which is our BI development system.
    Is is possible?
    If you have any solution, tell me about that.
    Thanks.

    Hi
    If you want the object which is there in PRD to DEV system means, the only way is to do transportation. but to do reverse transportation, you should have STMS connection from your PRD to DEV system.
    The better way is to create the structure again in DEV system.
    If you want to go with reverse transportation, consult your basis person.
    Regards,
    Venkatesh

  • How can i reuse a structure in the query designer in 3.5

    Hi all,
    we are using the version BW 3.5,  now how can i reuse a structure made int he query designer, because i need it in another query, i did the structure and put it a technical name and save, help guys

    HI Richard,
    Create a Structure in Rows/columns and save As it, then in the left Panel of the Query Designer you can see three Folders
    1) Structures
    2) Keyfigures
    3) Dimensions
    then Expand the structures Folder, there you can find your saved structure, Structures are 2 types
    1) With Key figures
    2) Without Key Figures
    If you have the key figures in your saved structure, then you can find it in the subfolder of with Keyfigures, else in the other folder.
    Now you can use this structure by draging in all the queries which are on the same InfoProvider (CUbe. MultiProvider)
    Regards
    ReddY A

  • In query designer, an hierarchy(structure)  duplicating lines in level 2.

    Here we are at version 7.0 - SP 10, I have created a structure hierarchy in BEX, and when I execute this query the result is ok ... until I tried to closed or open the second level.
    At first, it doesn't close, and the worst if I tried to open  it's
    duplicating the lines of the second level.
    In query designer, creating an hierarchy(structure) something like this:
    > total division 1    
    ...> division 1.1     
    ...> division 1.2     
    > total division 2    
    ...> division 2.1     
    ...> division 2.2     
    and after the execution, if I tried to close or open the level of division 2 the result will duplicates the lines division 2.1 and division  2.2. the result is like this:
    > total division 1    
    ...> division 1.1     
    ...> division 1.2     
    > total division 2    
    ...> division 2.1     
    ...> division 2.2
    <b>...> division 2.1     
    ...> division 2.2</b>
    The stange is in excel it works normaly.
    Best regards,
    Silvio Meurer

    Hi,
    An Heirarchy is always an addition of the below nodes. hence. WBS 1 = WBS 1.1 + WBS 1.2. since youre looking at durations. it will add up 7+9 instead of looking at earliest start and latest end dates.
    dont know if itll work but a suggestion would be to get the start date and end date for WBS 1 and then do the calculation for duration in a formula in query designer.
    regards,
    Dilanke

  • Reg Query designer - Urgent

    Hello all,
    In the Query designer we have a structure in which I would like to edit one of the K.F . For example the K.F is a Formula K.f which is built on Fiscal year & Amount Now I've to include version to this K.F.
    Please let me know how this can be done at the earliest.
    Regards
    Madhavi

    Hi thanks for the quick response..
    I just want to change a K.F in the Structure i.e I want to edit the re-useable strucure by adding a component 0version to this  K.F.
    I am unable to restrict the K.F when I right click the K.F I can see only edit but not restrict..
    Plz suggest
    Regards
    Madhavi

  • How to achieve  Structures in InfoProvider area in Query Designer?

    Hi,
    How to achieve  Structures in InfoProvider area in Query Designer? When I was observing some standard Queries, I observed Structure( With KF and Without KF ) along with KeyFigures & Dimensions in Infoprovider area. I was wondered about , how it was possible? Can anyone clarify regarding this issue? I am suppose to creta some queries for HR reorts........
    Regards,
    Suman

    Hi Suman,
    Structures are two types, one is local and other is Global.
    Structures that you have seen at Infoprovider level are Global, those we can use for any query developed on Infoprovider.
    Local structures cannot be used for other queries, those are local to that query only.
    Structures we can define at Rows and Column levels. We can define for Characteristics and Keyfigures also.
    To define a strucure, Right click on Rows/Columns area and say New Structure and add the fields you required so that query is defined as Local, If we want to make that strucure as Global-- then Right click on the Strucure and say Save as and Save it with proper description and technical name, then that structure will become Global Structure and it appears in the Infoprovider level.
    Remember we can a maximum of Two Strucures for a Query, there is no limitatiion to define the number of Global structures  at Infoprovider level.
    Hope this helps.
    Veerendra.

  • BW 7.0 - display of the global structures in the query designer

    Hi colleagues,
    When I open the gobal structures of an infoprovider in the query designer, the system shows me all levels of the structures; that is not clearly arranged.
    It would be better, the system would show allways  only the next level.
    Is there any idea ?
    regards
    Dieter Gerl

    Hi,
    I can think of three possibilities for a solution.
    1. Store the name of the required table in a config table and select at runtime
    2. use an 'IF' or 'CASE' statement to deterimine which system you are currently in and then place the required varible within this statement.
    3. Preferred solution: use a Field Symbol to assign the table at run-time, this way no errors will occur and your program will compile.
    There are many examples of FIELD SYMBOLS on SDN and even the F1 help in SAP.
    regards,
    CH

  • Two structures on same axis in query designer

    Hi,
    I developed a query with two structures column axis in Bex query designer (in BI 7)
    when I open this query in report designer is showing this error
    " T<b>he Report Designer does not support this query drill down. Column axis may contain one structure only: remove any additional dimensions</b> "
    Can you please help me on this issue.

    Hi Ram,
    sorry for the late reply, had a weekend break.
    If a query (or query view) contain two structures and also one or
    more characteristics then a dynamic section will be used. The dynamic
    section will generate individual cells for each intersection of the two
    structures, this means you will be able to re-position those cells freely.
    <b>Also you cannot use a query or query view which contains more than one
    structure in the columns.</b>
       and you are having two structures in your columns, that is the reason you are getting the error message. It doesn't matter even if your query runs fine in WAD and Query designer, but your structure placements doesn't satisfy the Report Desinger specs.
    Hope it helps,
    Venkat
    *thanks = points in SDN

  • Modifying the structure of the output by adhoc query designer

    Hi,
    Is there any way of modifying the output structure[row, column width, background color,font ] of the result given by the ad-hoc query in WAD.
    I want to change the font,size, color of the text output given by executing the query using the ad-hoc query designer.
    Please let me know if i can modify some class or method to do so or any other possibility?
    Thanks
    Sachin

    Hi Sachin,
    If you are designing a Table or a Chart on WAD , then you have the option of changing by right click on Table or Chart and click Properties/Edit properties.. here you can change the output color, font, background, width, number of output rows.. etc
    hope this helps,
    Thanks,
    Sudhakar

  • Reg. Bex Error while opening query in query designer!!!!!

    Hi Guys!!
    Can any one help me in getting out of this issue.
    I am getting BEx Error while opening query in query designer as below.
    3:45:00 PM.400: Info: Query Designer Start. Revision: 500
    3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager
    -CALLING-FROM- 3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDfForm.InitFromCommandManager(QDbCommandManager iCommandManager)
       at com.sap.bi.et.QueryDesigner.QDbCommandManager..ctor(QDbApplicationData iApplicationData, QDfForm iWindow)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Init()
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Table View
    3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Rows/Columns
    3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Cells
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Conditions
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Exceptions
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - InfoProvider
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Filter
    QDbCommandManager::CommandExecute  - Properties
    QDbCommandManager::DoViewCommand  - Properties
    QDdEventDispatcher::MenuItemClickedHandler - Bar clicked: OpenQuery
    QDbCommandManager::CommandExecute  - Open...
    OSDialogForm caught Exception: GetNodes: RFC Exception
    -EXCEPTION-START- 3:45:19 PM.24: TRACE EXCEPTION  ---
    Exception Name: ObjectDisposedException
    Exception Message: Cannot access a disposed object.
    Object name: 'OSDialogForm'.
    Exception    at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
       at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
       at System.Windows.Forms.Control.Invoke(Delegate method)
       at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
       at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
       at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
       at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    Full Stack:   at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
       at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
       at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
       at System.Windows.Forms.Control.Invoke(Delegate method)
       at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
       at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
       at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
       at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    -EXCEPTION-END----
    -CALLING-FROM- 3:45:19 PM.24: TRACE EXCEPTION  ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
       at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
       at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
       at System.Windows.Forms.Control.Invoke(Delegate method)
       at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
       at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
       at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
       at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    Thanks in advance
    Peter

    Hi
    If I got your question properly, you have SAP GUI Installation issues , Try to install relevant Excel version too.
    http://help.sap.com/saphelp_nw70/helpdata/en/9c/03a042b443c56ae10000000a155106/frameset.htm
    BASIS Team can help you in this.
    Hope it helps

  • Want to remove Characterstics Structure on run time ( Query Designer )

    Dear Friends,
    I have a query where i defined one Characterstics Structure. Its working fine.
    When i run the report this structure is comming by default.
    If i want to remove means drag and drop this structure like other characterstics and key figures its not working.
    How can i achieve this scanrio.
    Regards
    Naeem

    Hi,
    i want to put structre in free charachterstics on run time.
    It is not possible. You can include only navigational attributes in Free Char section of the Query.
    You can have Structures only in Rows and Columns. You can have only two structures per Query.
    Regards,
    Suman

Maybe you are looking for

  • I'm new to iTunes and can't sync my pc with my iPhone. I don't seem to have a "sidegar" with the new iTunes. Help

    Hi I'm new to iPhone and iTunes - I'm trying to sync some music from my PC to my iPhone. I've looked on the net and all the advice says: look at the sidebar and find your device. Easier said than done, The sidebar on my version of iTunes, downloaded

  • Unable to install Flash on older Mac-running 10.5.8

    Help! Is anyone else unable to install an older version of Flash on their less-then brand new computer(PowerMacG4)?? I'm running 10.5.8. I've downloaded the Uninstaller(which has a pink x in the upper-right corner) but two versions of Flash remain on

  • 24" iMac Firmware

    After reading some troubleshooting posts on the forums regarding hums, etc. I decided to check to see if there were any available firmware updates. My firmware doesn't seem to match the most recent intel firmware updates on apple.com. However, the mo

  • Internal problem with reactivating my subscription

    I  had to change my billing details  for my subscription.  When I try to reactivate my subscription it says there is an internal error. I cannot get any direct contact to fix the problem  Please help. Aberfeldie

  • Reuse JSF Components

    Hi, I have to use the same Employee info in about 20 pages. This Info consist of a PanelBox with 4 OutputText. Is there a way that I can reuse that component (jsp:include , tags) ??? I have used tags for reuse the page look and feel, but I found that