Reg : support packages

Hi all,
we are in the process of applying support packages to RAR 5.3 .We have undeployed all the files except db files .Now when we are going to deploy the support packages through jspm do we have to deploy RAR 5.3 again as we have undeployed through sdm.

resolved

Similar Messages

  • Reg Support Package in BI 7 Netweaver 2004s

    Hi all,
    This week My Basis people are going to install BI 7(Netweaver 2004s) in the system.
    May I now Initially upto which support package is good like SAPKW70012..........or 13 or 14.......
    Thanks in advance....
    Praveen.K

    Hi,
    Pls go for SP 13.
    SP 13
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/spat/index.htm?sp1=SAPKW70013]
    http://service.sap.com/sp-stacks
    Hope this helps,
    Regards
    CSM Reddy

  • Support package update error

    Dear all,
    I am currently update my system.
    The current version is ECC6 EHP7 based on NW7.4
    SAP_BASIS 740 0002
    SAP_ABA 740 0002
    I would like to upgrade to SPS level 5
    We use DB2 LUW 10.5
    In the update phase, we encountered an error message:
    SQL-error "-203-SQL0203N  A reference to column "TABNAME" is ambiguou
    2EETP345 s.  SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL
    As I can see  in the log file, error messages are as below
    ===========================
    3 ETP399 "SHPOSITION", DD30L."AUTOSUGGEST" AS "AUTOSUGGEST" FROM "DD31S"
    3 ETP399 INNER JOIN "DD30L" ON "SHLPNAME" = "SUBSHLP" WHERE "AS4LOCAL" =
    3 ETP399 'A' AND "AS4LOCAL" = 'A' AND "HIDEFLAG" = ' ' AND "AUTOSUGGEST" = 'X'
    3 ETP399 
    2WETP000 06:42:38: Retcode 1: error in DDL statement for "V_DSH_ASSIGNED                " - repeat
    2EETP345 06:42:50: Retcode 1: SQL-error "-203-SQL0203N  A reference to column "SHLPNAME" is ambiguo
    2EETP345 us.  SQLSTATE=42702" in DDL statement for "V_DSH_ASSIGNED                "
    2 ETP399  --------------- DB-ROLLBACK() ---------------
    2EETP334 06:42:50: error in DDL, nametab for "V_DSH_ASSIGNED" not activated
    3 ETP379X06:42:50: activating Nametab "V_DSH_TF_DETAIL":
    3 ETP355Xstatements:
    3 ETP399 CREATE VIEW "V_DSH_TF_DETAIL" AS SELECT DD02L."TABNAME" AS
    3 ETP399 "TABNAME", DD03L."FIELDNAME" AS "FIELDNAME", DD02L."TABCLASS" AS
    3 ETP399 "TABCLASS", DD03L."SHLPORIGIN" AS "SHLPORIGIN" FROM "DD02L" INNER
    3 ETP399 JOIN "DD03L" ON "TABNAME" = "TABNAME" WHERE "AS4LOCAL" = 'A' AND
    3 ETP399 "AS4LOCAL" = 'A'
    3 ETP399 
    2WETP000 06:42:50: Retcode 1: error in DDL statement for "V_DSH_TF_DETAIL               " - repeat
    2EETP345 06:43:02: Retcode 1: SQL-error "-203-SQL0203N  A reference to column "TABNAME" is ambiguou
    2EETP345 s.  SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL               "
    2 ETP399  --------------- DB-ROLLBACK() ---------------
    2EETP334 06:43:02: error in DDL, nametab for "V_DSH_TF_DETAIL" not activated
    2 ETP301 ----------------------------------------------------------------------
    3 ETP361 "0" Shadow-Nametabs activated, DDL executed
    2 ETP362 "2" Shadow-Nametab activations failed
    2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2014/03/19 06:42:38")
    2 ETP363 End  : Act. of Shadow-Nametabs with DDL ("2014/03/19 06:43:02")
    2 ETP301 ----------------------------------------------------------------------
    2 ETP301 ----------------------------------------------------------------------
    2 ETP364 Begin: Act. of Shadow-Nametabs ("2014/03/19 06:43:02")
    2 ETP301 ----------------------------------------------------------------------
    2 ETP301 ----------------------------------------------------------------------
    2 ETP338XTouch Load of nametabs
    ===========================
    I have checked another system which is also ehp7 based on NW740 0005, the view "V_DSH_TF_DETAIL" totally doesn't exist, but that is oracle database, here in my case is DB2 database, I have searched for SAP OSS but seems no sap notes for it.
    Do you have any idea how to solve this problem? Big thanks!
    Best regards,
    Fresh man

    Hi Ashutosh,
    Many thanks for your reply, yes this definitely solve my problem.
    But I feel quite confused what's the real reason.
    Several weeks ago, I update a system (EHP7+Oracle) from 74002 to 74005, with SUM, no such problem, however this time, its EHP7+DB2 10.5, from 74002 to 74004, with SPAM, met this kind of problem...
    The support packages are totally the same...
    is it because I should upgrade from 02 to 05 directly? 04 has problem?
    or I should update with SUM instead of SPAM?
    or it is because of DB2??
    or I should involve other packages like something like ST into the update queue?
    Best regards,
    Fresh

  • Support Package error

    Hi Experts,
    Currently i am installing suppport package for  PI 7.10.
    SP : SAP_BASIS.
    Just newly installed the sap system -> after kernel upgrade, i applied latest SPAM verion - 27.
    NowBusiness package SAP -basis is in the process. I started the package three hours back. still is in the process. i chcked the log files /usr/sap/trans/tmp/SAPIB71006.<SID>
    ====================================================================     ).
    4 ETW000   1 entry for SOTR_TEXT rejected - language not installed (00127991401D
    1DEBBA864FE336A2EB85J*
    4 ETW690 COMMIT "0" "1008778130"
    4 ETW000   0 entries for SOTR_TEXT imported (00127991401D1DEBBA864FE336A2EB85E*)
    4 ETW690 COMMIT "0" "1008778130"
    4 ETW000   0 entries for SOTR_TEXT imported (00127991401D1DEBBA864FE336A2EB85D*)
    4 ETW690 COMMIT "0" "1008778130"
    4 ETW690 COMMIT "0" "1008778130"
    4 ETW000   0 entries for SOTR_HEAD imported (00127991401D1DEBB0E8673749278B85*).
    4 ETW690 COMMIT "0" "1008778130"
    4 ETW000   0 entries for SOTR_TEXT imported (00127991401D1DEBB0E8673749278B85J*
    4 ETW000   1 entry for SOTR_TEXT rejected - language not installed (00127991401D
    1DEBB0E8673749278B85J*
    4 ETW690 COMMIT "0" "1008778130"
    =====================================================================
    Observed that error says `entry for SOTR_TEXT rejected - language not installed`
    I have not installed the language import till now. I am wondering that that could be an issue.
    My logs are keep updating. symptom tells than till import is in the progress.
    Could someone reply, Does the Language import must  for Support package installation ?.
    Now Spam screen says that  `Main import ` on the screen.
    Thanks
    Thirumal

    Hi Vani,
    Thank you very much,
    SAP_Basis package has been successfully completed. As  u said language import not required to update support packages.
    It took me around 7 hours to complete the update.Now i have started the Rest of the Business package.
    It seems its totally killing my time.  I think it shouldnot take this much time to complete a single package I need to install other packages like .
    SAP_ABA, PI_Basis,SAP_BW and ST_PI.
    Hi Vamshi,
       Thank you. Finally package completed.
    Thanks and Regards
    Thirumal

  • Import Basis Support Package 7.00 error

    Hi All,
    I wanted to apply Basis support package 9 for release 7.00 for our solution manager 4.0 system.
    When i started, it gave an error in the phase ADDON_CONFLICT? stage.. The message is as below:
    Phase ADDON_CONFLICTS_?: Explanation of Errors
    Conflicts were found between the Support Packages that you want to
    import and the Add-Ons installed in the system. To guarantee the
    consistency of your system, the import is interrupted until all Conflict
    Resolution Transports (CRTs) for the listed Support Packages are
    included in the queue.
    To include the CRTs in the queue, proceed as follows:
    - Write down the Support Packages and Add-Ons that have conflicts.
    - Leave this screen by choosing 'Cancel' (F12).
    - Load the CRTs for the Support Packages with conflicts from the SAP
      Service Marketplace or request them from your Add-On supplier.
    - Define the extended queue again in the Support Package Manager.
    - Import the queue. The Support Package Manager executes all steps from
      the beginning.
    If the problem involves an SAP Add-On, see SAP Note 53902, which tells
    you which CRTs resolve the conflicts. Otherwise contact the supplier of
    your Add-On for details on how to proceed.
    The following contains a table of Support Packages for each Add-On for
    which conflicts were detected. The column 'Information on the Conflict
    Resolution' specifies how you can resolve a conflict. For more
    information, select the corresponding 'Information for the Conflict
    Resolution'.
    Conflicts Between Add-On ST 400 and Support Packages
    Software Component   Release      Support Package        Information on
                                                             Conflict Resolution
    SAP_BASIS            700          SAPKB70009             Include CRT
    Can anyone guide me how to proceed.
    Thanks,
    Sailesh K

    Hi Shailesh,
    You are employing one or more Add-Ons in your system, apply patches regularly and want to know how the consistency of your Add-Ons is guaranteed. The list of Add-Ons installed in your system is stored in table AVERS.
    During patch application the SAP Patch Manager (SPAM) checks for conflicts between patches in the queue and the installed Add-Ons. A conflict occurs if an object delivered in a patch is also delivered in an Add-On. If conflicts are detected, SPAM stops processing at step ADDON_CONFLICTS_? and asks the user to load the corresponding CRTs into his system. The attributes of such CRTs match the Add-On id, Add-On release and patch predecessor (i.e. the patch in conflict).
    The patch application can only resume if all CRTs are selected in the patch queue. To resolve a conflict SPAM does not check if the conflicting object is contained in a CRT. It suffices that the corresponding CRT has been selected in the patch queue. All conflicts raised by its patch predecessor(s) are then resolved in one go.
    CRTs were introduced to protect the consistency of Add-Ons during the application of patches, such as Hot Packages and Legal Change Patches (LCP). There are two types of CRTs:
    1. Conflict Resolution Transports (CRT)
    A CRT resolves conflicts between one patch and one version of an Add-On including all previous versions. Example:
    Consider a system where Add-On IS-X is installed. During the application of patches P1 and P2 SPAM detected conflicts between the patches and the Add-On.
    To resolve these conflicts two separate CRTs are required, CRT1 and CRT2. A consistent patch queue looks like this:
        P1
        CRT1
        P2
        CRT2
    SPAM will only let you resume the patch application if you redefine the patch queue containing all four patches. You can see the name of the patch for which a CRT resolves a conflict in the "Predecessor" field in the patch queue dialog.
    2. Collective Conflict Resolution Transports (CCRT) are similar to CRTs but resolve conflicts between several patches and an Add-On. Example:
    Consider the previous example but this time the conflicts between patches P1, P2 and Add-On IS-X are resolved not by two CRTs but by one Collective CRT (CCRT) CCRT1. A consistent patch queue looks like this:
    P1
    P2
    CCRT1
    SPAM will only let you resume the patch application if you redefine the patch queue containing all three patches. The CCRT is added at the end of its highest predecessor, here P2. You can see the highest predecessor for a CCRT in field "Valid to patch#" when you scroll the patch queue dialog to the right.
    Keep in mind that a CCRT describes a range of patches for which conflicts are resolved, with the lower limit being the predecessor and higher limit the highest predecessor.
    Cheers,
    Shyam

  • Error in the phase IMPORT_PROPER while applying support packages

    Dear All,
    I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
    I have successfully applied the kernel patch and started applying the support packages,  i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
    ========================================================================================================
    START imp all              SCD        20081229080538              DDIC         sealcpro 20081229080537
    INFO: event SAP_IMPORT_START triggered successfully
    INFO  TBATG CONVERSION OF  SCD N      not needed                  DDIC         sealcpro 20081229080537
    START tp_getprots          SCD P      20081229080539              DDIC         sealcpro 20081229080537
    2EETP000 sap_dext called with msgnr "1":
    2EETP000      db call info
    2EETP000 function:   db_setget
    2EETP000 fcode:      RT_SETB (65535)
    2EETP000 tabname:    TRBAT
    2EETP000 len (char): 0
    2EETP000 key:
    2EETP000 retcode:    1
    1AETP000 exit in function texitnow
    ERROR: EXIT(16) -> process ID is: 5319
    STOP  imp all              SCD   0016 20081229080602              DDIC         sealcpro 20081229080537
    =========================================================================================================
    And also when i look at the Support package import logs they show that
    TEST IMPORT
    Import ABAP Dictionary Objects and
    ABAP Dictionary Activation phases ended with return code 4
    But i dont think this can give any problem.
    I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
    I had to start SAP and only then i was able to connect to the SERVER again.
    Can you please help me on this..
    For any more information plz let me know
    Thanks and regards
    Hunky

    Dear Balaji,
    Thank you very much for the reply...
    I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
    But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
    ===================================================================
    DBIF_REPO_INTERNAL_ERROR
    Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
    An unspecified internal error occurred in the SAP-internal
    database interface.
    For further analysis the SAP system log should be examined
    (transaction SM21).
    Check the entries in the developer trace of the relevant work process
    (transaction ST11).
    Attempted to access component "LOAD" of program
    "CX_SY_OPEN_SQL_DB=============CP ".
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_REPO_INTERNAL_ERROR" " "
    "SAPLSTPA" or " "
    ==========================================================================
    Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
    So i request you to kindly help me on this as i am running out of time in delivering my server.
    Waiting for all the valuble replies
    Thank you in advance
    Regards
    Hunky

  • Import support package SAPKB70015 at PI System is stuck on IMPORT_PROPER

    Dear Expert,
    I have some problem when import support package SAPKB70015 at PI System.
    IT had shown as below.
    Main import
    Transport request : SAPKB70015
    System : CXI
    tp path : tp
    Version and release: 372.04.08 700
    sap_dext called with msgnr 4:
    db call info
    function: db_report_interface
    fcode: UPDATE_REPORT
    tabname: TEXT
    len (char): 40
    key: /OSP/CL_CJS_CONTEXT===========CP
    retcode: 4
    Main import
    End date and time : 20081120021353
    Ended with return code: ===> 12 <===
    And I checked the transport log,It shown as below.
    4 ETW690 COMMIT "360444" "53156878"
    3 ETW674Xstart import of "LIMUCLSD/OSP/CL_CJS_CONTEXT" ...
    4 ETW000 1 entry for TADIR updated (R3TRCLAS/OSP/CL_CJS_CONTEXT ).
    4 ETW000 REPOS /OSP/CL_CJS_CONTEXT===========CP A replaced.
    4 ETW000 dev trc ,00000 Thu Nov 20 02:13:53 2008 39924798 39.924798
    4 ETW000 http://dbsloci. ,00000 *** ERROR => Cannot update a LOB column for more than one row piecewise
    4 ETW000 85 39.924883
    4 ETW000 dev trc ,00000 sc_p=0x110f57d68,no=55,idc_p=0x110f70638,con=0,act=1,slen=125,smax=256,#vars=5,stmt=0x111e1f700,tabl
    e=REPOTEXT
    4 ETW000 66 39.924949
    4 ETW000 dev trc ,00000 prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=2,upsh_p=(nil),ocistmth_p=0x111e20098
    4 ETW000 53 39.925002
    4 ETW000 dev trc ,00000 IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=84,vmax=32,bound=1,iobuf_p=0x111
    0a4220,vda_p=0x111e21a60
    4 ETW000 58 39.925060
    4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22180,lcurr_p=(nil),rret=0
    4 ETW000 48 39.925108
    4 ETW000 dev trc ,00000 OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=(nil),vda_p=0x1
    11e222c0
    4 ETW000 55 39.925163
    4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22220,lcurr_p=(nil),rret=2
    4 ETW000 47 39.925210
    4 ETW000 dev trc ,00000 UPDATE "REPOTEXT" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A2 AND "LANGUAGE" = :A3
    4 ETW000 51 39.925261
    4 ETW000 dev trc ,00000 RETURNING "DATA" INTO :A4; 29 39.925290
    4 ETW000 dbrepolo ,00735 ***LOG BZY=>unexpected return code 2 calling dbrepolo#? @ 735
    4 ETW000 75 39.925365
    2EETW000 sap_dext called with msgnr "4":
    2EETW000 -
    db call info -
    2EETW000 function: db_report_interface
    2EETW000 fcode: UPDATE_REPORT
    2EETW000 tabname: TEXT
    2EETW000 len (char): 40
    2EETW000 key: /OSP/CL_CJS_CONTEXT===========CP
    2EETW000 retcode: 4
    1 ETP154 MAIN IMPORT
    1 ETP110 end date and time : "20081120021353"
    1 ETP111 exit code : "12"
    1 ETP199 ######################################
    System information
    SAP = NW2004s SR3
    Database = Oracle 10.2.0.2
    OS versions = AIX 5.3
    Tp version = 700 Unicode 179
    R3trans version = 700 Unicode 183
    PS.I checked tp connect return code 0 and R3trans u2013s return code 0
    Could you please suggest how to fix this problem?
    Thank you very much
    Jaturong

    Iu2019ve updated database statistics and then try to reimport the package again. But It canu2019t import package.
    Are you still getting the same error after you retry the statistics update?

  • Applying BASIS support package 14 on IDES (DB2 & Windows)

    Hi all,
       I am trying to apply BASIS support package on IDES. Currently  process is running on IMPORT 2 step.  I run in diaglog and it was continuously showing MOVE NAMETABS at the end.  and in ST22 I see thousands of dumps being generated and almost all are related to    SYNTAX_ERROR
    Short text
        Syntax error in program "SAPLSALC ".
    at happened?
      Error in the ABAP Application Program
      The current ABAP program "SAPLSALI" had to be terminated because it has
      come across a statement that unfortunately cannot be executed.
      The following syntax error occurred in program "SAPLSALC " in include "LSALCU65
       " in
      line 1:
      "Function "SALC_INFO_GET_TREE" not found in Function Library."
      The include has been created and last changed by:
      Created by: "SAP "
      Last changed by: "SAP "
      Error in the ABAP Application Program
      The current ABAP program "SAPLSALI" had to be terminated because it has
      come across a statement that unfortunately cannot be executed.
    Can anyone of you help me on this issue.
    AWAITING REPLY
    Thanks

    >    I am trying to apply BASIS support package on IDES. Currently  process is running on IMPORT 2 step.  I run in diaglog and it was continuously showing MOVE NAMETABS at the end.  and in ST22 I see thousands of dumps being generated and almost all are related to    SYNTAX_ERROR
    There are a few known issues with KB70014, those are documented in
    Note 822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
    Markus

  • Error in Applying Java support packages through JSPM

    Hi All,
    While Applying support packages, Package CAF 7.00 SP 13 is through an error
    help required.
                       For detailed information see the log file of the Deploy Service.
    07/12/05 21:55:26 -  ***********************************************************
    Dec 5, 2007 9:55:26 PM   Info: End of log messages of the target system.
    Dec 5, 2007 9:55:26 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    Dec 5, 2007 9:55:26 PM   Error: Aborted: development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0', grouped by software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application sap.com/cafUIptn~common..
    Reason: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
         com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Dec 5, 2007 9:55:26 PM   Info: Starting to save the repository
    Dec 5, 2007 9:55:28 PM   Info: Finished saving the repository
    Dec 5, 2007 9:55:28 PM   Info: Starting: Update: Selected software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0' updates currently deployed software component 'CAF'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.0.20060221161956''/'0'.
    Dec 5, 2007 9:55:28 PM   Error: Aborted: software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
    Failed deployment of SDAs:
    development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0' : aborted
    Please, look at error logs above for more information!
    Dec 5, 2007 9:55:28 PM   Info: Starting to save the repository
    Dec 5, 2007 9:55:30 PM   Info: Finished saving the repository
    Dec 5, 2007 9:55:30 PM   Info: Starting: Update: Selected software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0' updates currently deployed software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.1.20060302145618''/'0'.
    Dec 5, 2007 9:55:30 PM   Error: Aborted: software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0':
    No further description found.
    Dec 5, 2007 9:55:30 PM   Info: Starting to save the repository
    Dec 5, 2007 9:55:32 PM   Info: Finished saving the repository
    Dec 5, 2007 9:55:32 PM   Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
    Dec 5, 2007 9:55:32 PM   Error: -
    At least one of the Deployments failed -
    Regards,
    Prashant.

    Hello Prashant.
    Check this supporting SAP note 1010640. It will solve your problem.
    This is typical problem when you upgrade from < SP8 to higher version.
    You need to Undeploy the CAF components from the system using SDM first and then reply the patches from JSPM.
    It should go with out errors.
    Let us know if this worked.
    *Reward points for helpful answer.
    Regards,
    Prashant P.

  • Download of ABAP Support Packages for SAP Netweaver PI 7.1

    Hello all,
    I'm just working on upgrade SAP Netweaver PI 7.0 to PI 7.1 and we have no functional connection to SAP OSS and therefore I'm not able to aprove some Support Packages via Solution Manager.
    PLEASE - Can somebody download the following Support Packages and copy it via ftp:
    BW Support Package 06 for 7.10 - SAPKW71006
    BW Support Package 05 for 7.10 - SAPKW71005
    Basis Support Package 06 for 7.10 - SAPKB71006
    Basis Support Package 05 for 7.10 - SAPKB71005
    ABA Support Package 06 for 7.10 - SAPKA71006
    ABA Support Package 05 for 7.10 - SAPKA71005
    PI_BASIS 2006_1_710: patch 0006 - SAPKIPYN06
    PI_BASIS 2006_1_710: patch 0005 - SAPKIPYN05
    FTP data:
    server: ftp.vse.sk
    username: sap
    password: Supp0rtpack
    Thanks for your time and help.
    Best regards,
    Slavomir Kysel.

    Solved by SAP Walldorf.

  • What minimum Support Package level is needed in BW 3.5 / 640 to be able to

    Hello Experts,
    A quick question:
    what minimum Support Package level is needed in BW 3.5 / 640 to be able to run the SAPGUI 7.10 (including BW add-ons)?
    I am also searching at my end.
    <removed_by_moderator>
    Read the "Rules of Engagement"
    Best Regards
    Sachin Bhatt
    Edited by: Juan Reyes on Jun 29, 2009 11:15 AM

    Hi,
    Refer the below link
    https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=30625
    A. FEP stands for Front-End Patch. FEPs are the patches that SAP releases for the BW front-end components of the SAP GUI.
    They can be downloaded from the SAP Service Marketplace (SMP login required), browsing to the following locations:
    BW 3.5 Addon can be found at Downloads -> SAP Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> BI ADDON FOR SAPGUI -> BW 3.5 ADDON FOR SAPGUI 7.10-> Win32.
    BW 7.0 Addon can be found at Downloads -> SAP Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> BI ADDON FOR SAPGUI -> BI 7.0 ADDON FOR SAPGUI 7.10-> Win32.
    Let us know if u have any issues.
    Regards,
    Ravi

  • System shutdown during support package import

    We were importing a BASIS support package in our system. Then for other reasons the system shutdown in the IMPOR_PROPER phase so...the system now is corrupted.
    We try to launch the import of support package again from SAP GUI but we can not, a dump is generated everytime.
    Are there a posibility of launch the import from operating system to finalice the aplication of package?what are the commands to do that?
    We try to avoid the recovery from backup
    Regards

    Hi,
    I don't  think it is possible other than backup restore.
    But already you are at worst case..i will suggest you to check the data in PAT01 and PAT03 tables at database level.
    And delete all the contents from those tables then retry to login.
    *Open a support message
    Regards,
    Nick Loy

  • Syntax Error while applying support package stack 8

    I get the following short dump while I was applying support package stack 8.  I'm at the latest saint version 34
    Runtime Errors         SYNTAX_ERROR
    Date and Time          23.07.2009 14:09:27
    Short text
         Syntax error in program "CL_DYNPRO_PROPERTY_BAG========CP ".
    What happened?
         Error in the ABAP application program.
         The current ABAP program "SAPLSCR2" had to be interrupted because it con
         a statement that cannot be executed.
         In the include "CL_DYNPRO_PROPERTY_BAG========CM009 " in the line 176 of
          program "CL_DYNPRO_PROPERTY_BAG========CP " the following syntax
         errors occur:
         "The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
         "d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
         "PTEXT"."
         Author and last person to change the include are:
         Author "SAP "
         Last changer "SAP "
    Error analysis
         The following syntax error was found in the program
          CL_DYNPRO_PROPERTY_BAG========CP :
         "The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
         "d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
         "PTEXT"."
    Trigger Location of Runtime Error
         Program                                 SAPLSCR2
         Include                                 LSCR2U47
         Row                                     31
         Module type                             (FUNCTION)
         Module Name                             RS_SCRP_PROP_ADD_TO_PROP_LIST
    1 FUNCTION RS_SCRP_PROP_ADD_TO_PROP_LIST.
    2 *"----
    3 ""Lokale Schnittstelle:
    4 *"  IMPORTING
    5 *"     REFERENCE(P_TEXTFIELD) TYPE  D021S-FNAM OPTIONAL
    6 *"     REFERENCE(P_TOOLTIPTEXT_TEXTELEM) TYPE  CHAR3 OPTIONAL
    7 *"     REFERENCE(P_TOOLTIPTEXT_VARIABLE) TYPE  D021S-FNAM OPTIONAL
    8 *"     REFERENCE(P_KEEPTAB) TYPE  SEU_BOOL OPTIONAL
    9 *"     REFERENCE(P_DISABLEIMPLICITLABELS) TYPE  SEU_BOOL OPTIONAL
    10 *"     REFERENCE(P_BARCODEINPUT) TYPE  SEU_BOOL OPTIONAL
    11 *"  CHANGING
    12 *"     REFERENCE(P_PROP_LIST) TYPE  PROP_LIST
    13 *"----
    14
    15 data: l_prop type prop_line,
    16       l_prop_list type prop_list,
    17       l_string type prop_str.
    18
    19 * Property TextField
    20 * -
    21
    22 if p_textfield is supplied.
    23   clear l_prop_list.
    24   clear l_prop.
    25   l_prop-name   = sprop_c_tag_textfield_name.
    26   l_prop-syntax = sprop_c_syntax_content .
    27   l_prop-value  = p_textfield.
    28   append l_prop to l_prop_list.
    29 * Zusammensetzen eines Strings der Form
    30 * <Name>value_1</Name> ... <Name>value_n</Name>
    >>   call method cl_dynpro_property_bag=>fill_prop_list_into_properties
    32     exporting
    33       prop_list  = l_prop_list
    34     importing
    35       properties = l_string.
    36 * Property-Eintrag zusammensetzen
    37   clear l_prop.
    38   l_prop-name   = sprop_c_tag_textfield.
    39   l_prop-type   = sprop_c_type_string.
    40   l_prop-syntax = sprop_c_syntax_content .
    41   l_prop-value  = l_string.
    42 * Property-Eintrag in PROP_LIST aufnehmen/ersetzen
    43   read table p_prop_list transporting no fields
    44       with key name = l_prop-name.
    45   if sy-subrc = 0.
    46     modify p_prop_list index sy-tabix
    47         from l_prop.
    48   else.
    49     append l_prop to p_prop_list.
    50  endif.
    Can anyone help me?  I now get the same error with executing other transactions as well.

    Hi,
    Please let us know the component which you are trying to apply. Is it BASIS or ABAP or BW and also let us know the version?
    I hope you are applying the BW patch 8, as per SAP's recommendation we need to apply both 8 an 9 patch of BW at the same time. If not we need to apply some notes which you could find in the service market place. Once you apply the notes, you can proceed with the SP application.
    Regards,
    Varadhu

  • Error while applying support packages

    Hi,
    I was applying support packges for NW 7.0 EHP2 for the components SAP BASIS/ABAP/PI BASIS & BW,  the support package level was 02, I have downloaded 03,04,05,06 for all the above four components.  While updating spam/saint update I got the above error, displayed below. But even while applying support packages I got a list of errrors.
    1.     
    Category: Abap programming error
      Runtime error:  call_function_parm_unknown
    CX_SY_DYN_CALL_PARAM_NOT_FOUND
    abap program: RSSPAM07
    Function parameter "IV_IMP_SCENARIO" in unknown
    this first error displayed after applying SPAM/SAINT update.
    2. The import was stopped, since an error occured during the phase IMPORT_PROPER, which the support package Manager is unable to resolve without your input
    The following details help you to analyse the problem:
    Error in phase : IMPROT_PROPER
    Reason for error:
    Return code:
    Error Message:
    Please provide any solution as soon as possible....

    The details of SLOG
    START CMDIMPORT            NG1 L      20120227162812              SHABZ        BasisTrn3 20120227162811973  
    STOP  CMDIMPORT            NG1 L      20120227162813              SHABZ        BasisTrn3 20120227162811973  
    START imp all              NG1        20120227162821              SHABZ        BasisTrn3 20120227162821661  
    INFO: event SAP_IMPORT_START triggered successfully
    START DD IMPORT            NG1 H      20120227162822              SHABZ        BasisTrn3 20120227162821661  
    STOP  DD IMPORT            NG1 H      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    START DD ACTIVATION        NG1 A      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 J      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 J      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    STOP  DD ACTIVATION        NG1 A      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    START DISTRIBUTION OF DD-O NG1 S      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 S      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 S      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    STOP  DISTRIBUTION OF DD-O NG1 S      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    INFO  TBATG CONVERSION OF  NG1 N      not needed                  SHABZ        BasisTrn3 20120227162821661  
    START MOVE NAMETABS        NG1 6      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 P      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 P      20120227162935              SHABZ        BasisTrn3 20120227162821661  
    STOP  MOVE NAMETABS        NG1 6      20120227162936              SHABZ        BasisTrn3 20120227162821661  
    START MAIN IMPORT          NG1 I      20120227162936              SHABZ        BasisTrn3 20120227162821661  
    STOP  MAIN IMPORT          NG1 I      20120227163023              SHABZ        BasisTrn3 20120227162821661  
    START TBATG CREATION OF EN NG1 n      20120227163024              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 Y      20120227163024              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 Y      20120227163034              SHABZ        BasisTrn3 20120227162821661  
    STOP  TBATG CREATION OF EN NG1 n      20120227163034              SHABZ        BasisTrn3 20120227162821661  
    START EXECUTION OF REPORTS NG1 R      20120227163035              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 R      20120227163035              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 R      20120227163202              SHABZ        BasisTrn3 20120227162821661  
    STOP  EXECUTION OF REPORTS NG1 R      20120227163202              SHABZ        BasisTrn3 20120227162821661  
    INFO  EXECUTION OF STANDAR NG1 9      not needed                  SHABZ        BasisTrn3 20120227162821661  
    INFO: event SAP_IMPORT_STOP triggered successfully
    STOP  imp all              NG1   0004 20120227163203              SHABZ        BasisTrn3 20120227162821661  
    START CMDIMPORT            NG1 L      20120227164418              SHABZ        BasisTrn3 20120227164416991  
    STOP  CMDIMPORT            NG1 L      20120227164454              SHABZ        BasisTrn3 20120227164416991  
    START DD IMPORT            NG1 H      20120227165608              SHABZ        BasisTrn3 20120227165607479  
    STOP  DD IMPORT            NG1 H      20120227170309              SHABZ        BasisTrn3 20120227165607479  
    START DD ACTIVATION        NG1 A      20120227170313              SHABZ        BasisTrn3                    
    START tp_getprots          NG1 J      20120227170313              SHABZ        BasisTrn3                    
    STOP  tp_getprots          NG1 J      20120227171206              SHABZ        BasisTrn3                    
    STOP  DD ACTIVATION        NG1 A      20120227171206              SHABZ        BasisTrn3                    
    START imp all              NG1        20120227171208              SHABZ        BasisTrn3 20120227171207614  
    INFO: event SAP_IMPORT_START triggered successfully
    START DISTRIBUTION OF DD-O NG1 S      20120227171208              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 S      20120227171208              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 S      20120227171303              SHABZ        BasisTrn3 20120227171207614  
    STOP  DISTRIBUTION OF DD-O NG1 S      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    START TBATG CONVERSION OF  NG1 N      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 N      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 N      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    STOP  TBATG CONVERSION OF  NG1 N      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    START MOVE NAMETABS        NG1 6      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 P      20120227171308              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 P      20120227171755              SHABZ        BasisTrn3 20120227171207614  
    STOP  MOVE NAMETABS        NG1 6      20120227171755              SHABZ        BasisTrn3 20120227171207614  
    START MAIN IMPORT          NG1 I      20120227171756              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    STOP  MAIN IMPORT          NG1 I      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    START TBATG CREATION OF EN NG1 n      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    START tp_getprots          NG1 Y      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    STOP  tp_getprots          NG1 Y      20120227195521              SHABZ        BasisTrn3 20120227171207614  
    STOP  TBATG CREATION OF EN NG1 n      20120227195521              SHABZ        BasisTrn3 20120227171207614  
    INFO  EXECUTION OF STANDAR NG1 9      not needed                  SHABZ        BasisTrn3 20120227171207614  
    INFO: event SAP_IMPORT_STOP triggered successfully
    STOP  imp all              NG1   0903 20120227195522              SHABZ        BasisTrn3 20120227171207614

  • DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0

    Hi Gurus,
    I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
    I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
    Can you please help to reset the queue and implementing this support package.
    Thank you,
    Regards,
    Ganesh

    Paste the SPAM log here.
    Regards,
    Nick Loy

Maybe you are looking for

  • Apple Mail error 1969-12-31 no sender / no reply

    Dear all, I would like your help because I have a problem which has been dragging the more than 1 year. He started in iOS 7 and since then he has been disturbing me. I've tried everything and still could not solve. I tried to contact the telephone su

  • Crystal Report 9 compatibility

    Hello, I am looking for the informaton if  Crystal Report ver. 9  is compatible with Windows Server 2008 R2 SP1 (x64 bit) and also office 2007 or office 2010 ? or just Excel 2007 or 2010? Could you please let me know? Thanks in advanced.

  • PSE 11 not running in Windows 8?

    Greetings, I installed PSE11 on Windows 8 machine and it ran fine once. Now it launches and I see it starting then dissapears. I think it is running in backround as i see it in task manager. I ran the compatability trouble shooter and used the recomm

  • SCCM 2012 R2 - Distribution Point untrusted domain - Not acknowledging Network Access Account (FYI)

    Hello! Scenario Built a single primary site server in one domain with multiple distribution points. All site servers are member of this one site. The distribution points in the primary site servers' domain function as expected. The distribution point

  • Bookmarks keep getting rearranged every morning when I open Firefox in the morning

    For the last week everyday when I open my browser either on my PC or laptop all my bookmarks are jumbled (no longer in alphabetical or) as when I closed it in the evening. This has just started to happen this week and I have been using Firefox for ov