Reg: Switch Over

Hello All,
Oracle Version: 11.0.2.1.0
Edition: SE1
Data Gaurd is not supported in SE1 so it is not possible to switchover.
Can i change the IP of the Standby to Primary and make the stand by database as Primary database.
Can anyone help please

I think there is a confusion in terminology:
1) Failover - This is activating the standby database to become a primary database. This involves a resetlogs. Once this is done there is no going back to the standby database (unless you use flashback database). This is what happens in a DR situation when you have lost the primary database. There is always the possibility of some dataloss.
2) Switchover - This is reversing the roles between primary and standby databases. Both primary and standby databases must be available. You can switch back again to the original configuration. There is no dataloss.
Note that both of these options are available in all editions of Oracle (EE, SE, SE1, XE), because they all use the same physical standby database architecture underneath. It is just that in Data Guard it has been automated.
So in Oracle Standard Edition you can also do switchover and failover, it is just that you manually have to do it. There are third party products that can do DataGuard for SE and they have automated the failover and switchover processes in Oracle SE/SE1. One such product is Dbvisit Standby.
The process involved for switchover is:
1) Shutdown the databases (primary and standby)
2) Switch the controlfiles between primary and standby
3) Move the redo logs from primary to the standby
4) Startup the databases
The difficulty comes in where the primary and standby databases have different file locations, or one of them is ASM and the other uses regular file systems. Also RAC makes it all more complicated, as well as OMF.
Dbvisit Standby can handle all scenarios when it comes to switchover.

Similar Messages

  • HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

    I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

    If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it.  Also, try changing the password associated with the Apple ID that you were using for iMessage.

  • Switch over between two SAP PI systems for downtime minimization

    Hello Colleagues,
    with our interfaces over our SAP PI 7.31 (ABAP/Java) system we assume we will run in a 7x24 h runtime scenario in the future.
    Regarding Business Continuity we have to think about solutions which help us to handle downtimes greater than 15 min. regarding Support Package upgrade, Kernel update, EHP, etc.
    The first idea is to implement a second equal SAP PI productive system in parallel to the existing one.
    On the sender side a switch over implementation like WebDispatcher, Load Balancer, etc.
    For maintenance all Interface traffic can run over PI Nr. 1 and PI Nr. 2 can be updated.
    Afterward all interfaces will switched to PI Nr. 2 and PI Nr. 1 can go in maintenance.
    Could be this as suitable solution for SAP PI Business Continuity or do you know better solutions?
    Many thanks in advance!
    Regards,
    Jochen

    Hello Bernhard, Hello Holger,
    many thanks for reply and providing these valuable information's.
    The nZDM Concept is already known to me but it doesn’t answer all our questions.
    Please let me explain a little more in detail.
    Not currently but in the near future we assume some new interface over our SAP PI System will come with the requirement max. downtime lower thank 10 to 15 min. only allowed.
    To be prepared regarding this possible scenario, we start thinking about possible different solutions.
    First step was the nZDM Concept, of course. But it didn’t meet all our requirements regarding interface downtime.
    Some points are:
    possible min. downtime is 30 min. and thus is over our requirements for interfaces
    only for Update (and planed for Upgrade) the SAP PI application
    all operating system and database related maintenance tasks are not covered by nZDM
    all Hardware (Server, Storage, etc.) as well not covered by nZDM
    Among others, because of these facts we start thinking about a second equal SAP PI system beside to existing productive one.
    Than line 1 will take over the whole interface traffic and in the meantime the line 2 can go in maintenance. After finalizing the maintenance for SAP PI Nr. 2 we can switch the interface traffic to SAP PI Nr. 2 to get SAP PI Nr. 1 free for maintenance.
    Regarding the topic “PI Federation” I found here in these documentation's several hints regarding this scenario (two SAP PI systems in an switch over scenario).
    PI Federation – An Overview
    among others  Page: 27
    Business Continuity: Central PI integration Server with redundant Integration Server to be used in controlled switch over scenarios when upgrading or patching.
    or
    How to Fast-Switch Integration Scenarios between SAP PI Runtimes Part II: Web Dispatcher
    But I didn’t found any further detail documentation's regarding this approach.
    The solution should fit as well to our existing hardware infrastructure.
    For production we use an IBM (AIX) failover-cluster switch between our both data center.
    Regarding our hardware infrastructure prerequisites and downtime requirements, which solution(s) do you recommend? Is PI Federation still an option?
    Many thanks in advance!
    Regards,
    Jochen

  • My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

    My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

    If you purchased it from Apple within the last 14 days then you can return it for a full refund. otherwise no. If you purchased it elsewhere you have to check with them.
    Do this to transfer info
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • External and internal mikes are not automatically switching over either recording or on voice calls

    My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
    Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
    1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
       Using the sound recorder if I start recording the sound with external  mike  and in-between  recording if I  switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound  up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
       But if I start the recording with inbuilt mike and in between recording  if I plug in  the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
       So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
    2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
    To resolve the issue I have tried following steps with no luck:
    1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
    2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
    3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
    3. I have updated the BIOS(Insyde F.65, 12/02/2010).
    4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

    Sounds like you need to upgrade to the iPhone 5s
    The 5s has Touch ID
    You can unlock your phone with your finger instead of typing in a key code
    No swiping to unlock either, just touch the home button
    You can enrol multiple fingers as well
    Here is a video of it in action
    http://www.apple.com/iphone-5s/videos/#video-touch
    Or wait and see what iPhone 6 has to offer
    That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
    And when you lower the phone turn it back on again
    Not sure about the phone locking when your on a call doesn't sound right

  • Switching over to Verizon family plan with iPhone 4S?

    I'm switiching from T-mobile to Verizon for the iPhone. Now the rest of my family would like to switch over as well but only one of them wants the iPhone 4S with me. When I went through a mock purchase with the regular iPhone 4. apple.com told me I had to visit a store to set up my family plan and would not let me pre order anything unless I was starting anew verizon contract by myself without a family plan. Is ther a way around this and if not, what's next? Will the iPhone be available at a Verizon store so my family and I can set up all our phones at once? Or do My brother and I need to go to an apple store to get our iPhones and set up the plan, but from there where and when would the rest of my family get their phones? Can anyone shed any light on this or offer any insight? I'm new to the chaos of trying to get an iPhone, especially when switching carriers. Thanks.

    I'm new to the chaos of trying to get an iPhone, especially when switching carriers.
    IMO, your best bet is to go to a VZW store and work it all out there.  They can switch you over and get you the phones you want right there in the store.

  • HT201401 cam works but not video? When turn camra on it takes photos but wont switch over to video when tap video switch?

    4s wont switch over to video when camra on? Takes photos fine but wont switch over to video?

    Hi tangier,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Click on the link to see more details and screenshots. 
    Take photos and videos - iPhone
    http://help.apple.com/iphone/7/#/iph1e767793c
    Choose a mode. Drag the screen left or right to choose, Video, Photo, Square, or Pano.
    Cheers,
    - Judy

  • I'm looking for a voicemail app that will automatically switch over after normal business hours and play an alternate voice-mail message. Does this currently exist?

    I’m looking for a voicemail app that will automatically switch over after normal business hours and play an alternate voice-mail message. Does this currently exist?

    Voicemail is through your carrier and on their equipment.
    It's function and features is set by them, not your phone.

  • My phone is not switching from 4G over to WiFi. The phone has the network memorized its just not check marking the network and to switch over to WiFi. How can I fix this?

    I have the iPhone 4S and the wifi was working on it earlier yesterday. I noticed that the wifi didn't kick on last night. It has the network memorized so it could connect automatically. The network name pops up and there's a signal but the spinning circle thing is there and it won't put a check mark by the network name. The wifi will pop up every now and then but only stay for a minute or less. Everyone else's phone and computer is connecting just fine but mine isn't. It won't switch over to WiFi from 4G. I've tried turning off the wifi on my phone. I've tried to forget the network and put in the password numerous of times and I tried to fix it by turning my phone on and off and that still didn't work. I'm hoping that this is a temporary thing but I don't know. What's a good way to fix this because seriously I would like to not use up all of my data for this kind of bull crap. So what's a good way to fix this?

    I got the ATV hooked up to the WiFi after manually inputting the DHCP settings.
    The ATV will not see iTunes from a PC on the same iTune network.  I guess you need an Apple computer for iTunes to connect to the ATV.
    The biggest problem is that the iTunes store on the ATV is nonexistent I imagine because of competition/ monopolies in the UAE.  If I was in Lao, Burma, Thailand, Mozambique no problem.  40 Countries are listed and non of them are from the Middle East.  When I logon to the iTunes store on my PC it too does not allow for me to buy any movies or TV shows.  I am not sure why. 
    As for the iPad OS6, iTunes has an icon and when you click it you get iTune U or Podcast, no video content.  The App store works fine and they are always happy to take your money but no video content. 
    To top it all off YouTube is no longer licensed under OS6.0 and although I can get it on Google Chrome it is by no means as quick (for reasons unknown).
    As I said before if I choose United States as my country the ATV hooks up and lets me browse TV and movies and watch trailers but not able to purchase (obviously).
    So my conclusion is that ATV will not hook up to the iTune store in the UAE?  If this is incorrect please clue me in.

  • I was forced to switch from my original computer to a new one and majority of my iTunes were switched over but my audiobooks did not. Is there any way that I can retrieve them again?

    I was forced to switch from my original computer to a new one and majority of my iTunes were switched over but my audiobooks did not. Is there any way that I can retrieve them again. If I go to attempt to rebuy it, then it says thhat I technically already bought it but it won't download.

    Audiobooks are not available for redownloading, so you need to transfer them from your old computer, or get them from your backup. How did you copy your iTunes contact from your old computer to our new one?
    Regards.

  • Can anyone tell me how to upload a url to an image onto facebook the way you could with a pc. Recently switched over to Mac and this is one thing I can't seem to figure out. Basically in Windows you could right click on an image, click copy the image url

    I've recently switched over to a Mac and before in Windows on a pc if you wanted to post an image on facebook you would right click the image you found on the post you wanted to share, then click copy url. You'd simply take that url and put it into the facebook post when uploading an image and that's all. Can not seem to find a way to do it now, other than saving the image to the computer and then uploading that which is not what I want to do. I've searched and searched but can't seem to find a solution other then posting in Parallels Window.
    Any suggestions??

    Thanks brody, I had been able to do that but on my business fb page I often post images and put in the links myself in the descriptions. In Windows you're able to post images by simply pasting in the url but on the Mac I'd have to download someone's image which I'm not comfortable doing so I find myself switching back and forth between the Mac and Windows.
    This link explains what I'm trying to do on the Mac probably in a less confusing way than I just did: http://howto.cnet.com/8301-11310_39-57496509-285/quickly-upload-photos-to-facebo ok-by-pasting-the-image-url/

  • My Verizon wireless service at my house has begun to degrade over the last 6 Month.  It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device.  How do I contact someone to see what the issue may be. Z

    My Verizon wireless service at my house has begun to degrade over the last 6 Month.  It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device.  How do I contact someone to see what the issue may be. Zip Code 22580.

    Out of curiosity how much data per month are you using?  Another factor could be if neighbors have all done the same thing as you and the node is being overloaded on home internet use.

  • Switch over from active to passive in the cluster

    If online EMS Sun Server goes off line , the client looses the connectivity with EMS till the IP address of the other online server is updated in client PC.
    When the servers switch over from active to passive in the cluster, we have to change the server IP settings at the client PC manually. Since both the active as well as the passive servers will be pinging, we are not in a position to identify the active/passive servers, so automatic server setting is not possible at the client.
    How to find out the solution for which server is active when the swich over is happend.

    Hi Kristoffer,
    remember to click on enable schedule when you schedule a package.
    To know if a scheduled package is ok you can see first if present in the tblschedule of your appset and also if present in the windows task schedulerif with status "ready".
    After you just have to check the view status if you found the package execution completed you're sure it's running. " version at the same time can cause issues also with different packages better to schedule with a sufficient delay to be sure that the first has ended, in your case 1 package is ok.
    I would delete the 2 packages from bpc, checking also the windows scheduler to be sure that no packages are running and rebuild one from scratch setting repeat every 4 hours and checking "enable schedule".
    Regards
         Roberto

  • I recently switched over from Apple to Sony and I would like to know how I can change my settings so that all my iCloud emails are forwarded to my Gmail account?

    I recently switched over from Apple to Sony and I would like to know how I can change my settings so that all my iCloud emails are forwarded to my Gmail account?

    Log in on iCloud.com and go to Mail. In Mail, at the bottom left you should see a gear icon. Click on it, go to Settings (or Preferences, I'm doing this from memory), and in there you'll find an option to forward your iCloud email to another service.

  • Switch over from taxinj to taxinn

    how to switch over from taxinj 4.7 version to eec6.0, to switch over from taxinj to taxinn, from business data point of view before cutover strategy , what are the things take into consideration , if taxcodes will overlap, with taxinn .
    what are the thigs take as precautions.
    waiting for ur response. thank you

    When you are switching fron TAXINJ to TAXINN, WRT Tax Codes, it is recommended to maintain new Tax Codes for TAXINN, as TAXINJ follows formula based calculation & TAXINN follows Condirtion based calculation.
    Regards,
    Rajesh Banka
    Reward points if helpful.

Maybe you are looking for

  • I really wanted to update my iPhone 4 software version 5.1.1 to be version 6.0.1, can you help me on this?

    I really wanted to update my iPhone software iPhone 4 version 5.1.1 to be version 6.0.1

  • Issues after updating ios 7.1.1 on my iPad Air

    I just updated my iPad Air (32GB) this morning to ios 7.1.1 from 7.1. After updating, my iPad Air just went into recovery mode... I have more than 26GB data in my iPad Air... I tried several ways to reboot the iPad. But I still cannot turn my iPad no

  • PHP4 and national characters

    I have Oracle8 installed on Novell Small Business 5.1. On another machine is Linux Red Hat 7.0 with Appache 1.3.3 server and PHP4. Web user nobody opens script.php. This script connects to my Oracle database and for example selects rows from table te

  • Problem in Communication channel monitoring..

    Dear friends, I am facing a problem in Communication channel monitoring. Problem: I have designed several communication channels in the Integration directory. To check the status of channel i will go to RWB->Component Monitoring->Adapter Engine->Comm

  • Content Caching with NM-CE

    Hi Folks, My CE is currently running in our network for few days but we encouter some unusual symtoms like; 1) The web broswer will hang with a blank page without displaying any item. After a while, everything will come out instantaneously. For big w