Reg Syncronization error

Hi All,
    I am implementing MI in my organization,I am getting some problems while setting
    Configurations in MI.I got the Syncronization Error
• Synchronization started 
• Connection set up (without proxy) to: http://mytecsap05:50100/sap/bc/MJC/mi_host?~sysid=XIM& 
• Connection to server failed. 
• Error: cannot connect (java.io.FileNotFoundException: http://mytecsap05:50100/sap/bc/MJC/mi_host?sysid=XIM&client=001&~language=EN&ACKNOWLEDGE=&) 
I checked in SICF transaction all the MJC related are Activated, and also I tested  mi_host with user MISUPERADMIN ,its working fine. I don't know where the problem is.
Can u anyone please help me out in this.
Thanks & Regards,
Archana.

Hi Archana
    This exception is thrown on the client because a short dump would have occured in the middlware.  Please go to transaction ST22 and check if there are any dumps for the sync user and see if you can resolve it or else copy paste the dump here. Might be we can provide you a solution :-).
Best Regards
Sivakumar

Similar Messages

  • Agenda syncronization error

    BlackBerry Curve 9300
    BlackBerry Desktop Software version 7.0.0.59
    Device software version 6.0 set 2475
    Syncronization with usb cable
    Wireless disconnected according to the manual instructions
    I had a previous version of BlackBerry Desktop Software and the syncronization was running fine.
    I started having the following agenda syncronization error since I updated the BlackBerry Desktop Software to the latest version:
    1st error message:
    "Failure of agenda startup. BlackBerry Desktop Software can't load the data configuration of the previous agenda. Reconfigure the agenda definitions to syncronize the data between the computer and the device"
    when I click the OK button...
    2nd message:
    "Failure of agenda startup. The agenda module will be closed as it's not possible to load it."
    The problem it's only in the agenda module. I still can syncronize the multimedia and applications modules.
    When I click the button "SYNCRONIZE ALL" it appears the following message:
    "The agenda data aren't configured for syncronization and will not be included when you do the syncronization. Click the CONFIGURE button to access and update the agenda definitions"
    The error message dialog disappears when I click the CONFIGURE button but nothing happens...
    Anyone knows how to solve this problem?
    Thanks in advance.
    Pedro

    Hi pwcarvalho,
    Welcome to the Support Community!
    Could you please provide more information? Are you synchonizing with Microsoft® Outlook®? If so, what version of Microsoft® Outlook® are you using? I would suggest first trying to reset your synchronization settings in the Organizer section of the BlackBerry® Desktop Software and then configuring them again before testing again.
    If this does not resolve the issue, please try to uninstall the BlackBerry® Desktop Software, reboot your computer, then reinstall the BlackBerry® Desktop Software from http://bbry.lv/Ls1B9o
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • "mapping null reg" compiler error LV2009

    Opens fine in LV 8.6, but gives "Compiler error. mapping null reg" error in LV 2009.
    If you get rid of the 2D transpose, the code compiles fine.
    Attachments:
    Bitmap to Graphic Block v1.0.vi ‏17 KB

    Thanks for reporting this. The issue has actually already been addressed in LabVIEW 2010. 
    Regards,
    Will
    Certified LabVIEW Architect, Certified Professional Instructor
    Choose Movement Consulting
    choose-mc.com

  • Syncronization Error 0x8004fd2b

    I am getting Error 0x8004fd2b when synchronizing. It happens at the calendar syncronization part. Has anyone solved this?
    Solved!
    Go to Solution.

    Hi there!
    To get you started, here's a KB article that discusses the error along with possible remedies:
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB14924&slic...
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Syncronization error afer obfuscating jar file

    hi.
    i am working with the MEP application. the application works fine before obfuscating the application.
    once i obfuscate the jar file, it gives me a error in synchronization
    the error is
    1251287045162 Thread[Sync Thread,6] [INFO] [HTTP 1] getHeaderField( Content-Type ) = application/vnd.syncml+xml
    dq: incompatible class: org.kxml2.io.KXmlParser
         at jd.a(+346)
         at jd.a(+5)
         at gx.a(+3)
         at as.a(+7)
         at as.a(+353)
         at c.b(+41)
         at c.a(+28)
         at fm.f(+12)
         at bj.a(+99)
         at sample.Midlet.d(+93)
         at sample.Midlet.run(+34)
    SyncMLEventReader: null
    1251287045334 Thread[Sync Thread,6] [INFO] [HTTP 1] Closing input stream
    Readed:
    1251287045412 Thread[Sync Thread,6] [INFO] [HTTP 1] Entering closed state
    kq:
    Please check URL
    http://172.29.120.50:8080/sync
    Error Details:
    java.lang.NullPointerException
         at as.a(+566)
         at c.b(+41)
         at c.a(+28)
         at fm.f(+12)
         at bj.a(+99)
         at sample.Midlet.d(+93)
         at sample.Midlet.run(+34)
    midlet.getSynchronizeTask
    ey:
    Please check URL
    http://172.29.120.50:8080/sync
    Error Details:
    java.lang.NullPointerException
         at bj.a(+179)
         at sample.Midlet.d(+93)
         at sample.Midlet.run(+34)
    Caused by:
    kq:
    Please check URL
    http://172.29.120.50:8080/sync
    Error Details:
    java.lang.NullPointerException
         at as.a(+566)
         at c.b(+41)
         at c.a(+28)
         at fm.f(+12)
         at bj.a(+99)
         at sample.Midlet.d(+93)
         at sample.Midlet.run(+34)
    ERROR in SYNC
    please help....

    Thanks it worked ...
    But i would like to share with you that ...
    i am using netbeans 6.5, and jdk 6
    i have build the complete application using netbeans 6.5 , but when increase the obfuscation level of the application and add the two lines
    -keep public class org.kxml2.io.KXmlSerializer
    -keep public class org.kxml2.io.KXmlParser to the additional settings. it give s me the following error
    {color:#ff0000}Expanding: C:\Documents and Settings\SShete\My Documents\NetBeansProjects\vtms_test_lwuit_Backup\build\obfuscated.jar into C:\Documents and Settings\SShete\My Documents\NetBeansProjects\vtms_test_lwuit_Backup\build\obfuscated
    C:\Documents and Settings\SShete\My Documents\NetBeansProjects\vtms_test_lwuit_Backup\nbproject\build-impl.xml:459: Error while expanding C:\Documents and Settings\SShete\My Documents\NetBeansProjects\vtms_test_lwuit_Backup\build\obfuscated.jar
    java.io.FileNotFoundException: C:\Documents and Settings\SShete\My Documents\NetBeansProjects\vtms_test_lwuit_Backup\build\obfuscated.jar (The system cannot find the file specified)
    BUILD FAILED (total time: 21 seconds){color}
    so what i have done is , i have opened the same project using wtk2.5.2 toolkit and then made changes to the default.pro file of proguard.jar.
    this proguard.jar is placed in c:\WTK\bin
    the changes to be made in defualt.pro are
    -keep public class org.kxml2.io.KXmlSerializer
    -keep public class org.kxml2.io.KXmlParser
    -dontoptimize
    again restart wtk toolkit.
    and now the application gets obfuscated and syncronizes properly..

  • Reg:Getting error text from a channel into a file or into a variable

    Hi,
    Can we get the error text such as u201Cjava.lang.NegativeArraySizeExceptionu201D  from a communication channel into a variable or in the form of an xml message so that based on kind of error further processing can be done.
    Regards,
    Rahul

    You can decide further processing based on the data available in the mapping. If the value comes in the source field for a list element as you expected do UDF and return error as string and decide the mapping as per business need. I talk about something like enhanced interface determination. That's one way. Reading the error message from the communication channel and decide does not seem to be better option.

  • Reg.SMTP Error while using UTL_MAIL in Oracle 10g

    Hi,
    I am getting the following SMTP error while trying to use the UTL.MAIL package of Oracle 10g. The query is as follows.
    begin
    utl_mail.send(
    sender => 'NAVEEN',
    recipients => '[email protected]',
    subject => 'Testing utl_mail',
    message => 'The receipt of this email means'|| ' that UTL_MAIL works'
    end;
    UTL_MAIL package is installesd and the port 25 is configured and firewall is changed.
    The same block was working fine before 5 days and now is giving the error as
    ORA-29279: SMTP permanent error: 501 badly formatted MAIL FROM user - no "<"
    ORA-06512: at "SYS.UTL_SMTP", line 21
    ORA-06512: at "SYS.UTL_SMTP", line 99
    ORA-06512: at "SYS.UTL_SMTP", line 222
    ORA-06512: at "SYS.UTL_MAIL", line 407
    ORA-06512: at "SYS.UTL_MAIL", line 594
    ORA-06512: at line 2
    Could you please help me out how to proceed???
    Regards,
    Naveen Kumar.

    Can you back that statement about an Oracle UTL_SMTP bug up with an actual bug number??
    From what you have posted, this is not a bug!! but expected and documented (RFC'ed) SMTP server behaviour.
    My proof:
    /home/billy> telnet mail 25
    Trying 165.143.128.26...
    Connected to mail
    Escape character is '^]'.
    220 CNTRRA20-GTW01 [CNTRRA20-GTW01] Thu, 06 Mar 2008 14:26:26 +0200
    HELO 10.251.93.58
    250 CNTRRA20-GTW01 Hello [10.251.93.58]
    MAIL FROM: naveen <[email protected]>
    501 naveen <[email protected]> : illegal character(s) in domain string
    MAIL FROM: NAVEEN
    501 NAVEEN : domain string is NULL.
    quit
    221 CNTRRA20-GTW01 closing connection. Goodbye!
    Connection closed by foreign host.
    /home/billy>
    As you can clearly see, the SMTP server expects a DOMAIN name as part of the MAIL FROM address. It also does not accept the alternative format suggested.
    Yes, not all SMTP servers are equal and some support additional formatting.
    But to imply that because the SMTP server does not accept your address formatted as string NAVEEN, it is a UTL_SMTP problem, sounds like a smelly one to me.

  • Reg. Error in MIGO transaction

    Hi friends,
    When I run standard transaction MIGO it is giving dump. Just after entering the Tcode it is giving dump. The following is the error we are getting.
    *Syntax error in program "SAPLVBDOCUBATCH_DM ".*
    Detail description:
    Error in the ABAP Application Program                                                                               
    The current ABAP program "SAPLMIGO" had to be terminated because it has          
    come across a statement that unfortunately cannot be executed.                                                                               
    The following syntax error occurred in program "SAPLVBDOCUBATCH_DM " in include  
      "LVBDOCUBATCH_DMU25 " in                                                        
    line 139:                                                                        
    "You can only use the COLLECT command in a table if all of its non-key "         
    "fields are numeric (type I, P, or F) . . . . . . . ."                           
    The include has been created and last changed by:                                
    Created by: "SAP "                                                               
    Last changed by: "SAP "                                                          
    Error in the ABAP Application Program                                                                               
    The current ABAP program "SAPLMIGO" had to be terminated because it has          
    come across a statement that unfortunately cannot be executed.                                                                               
    Please look into this and give me your suggestions, Thanks in advance.
    Regards,
    Chandu.

    Hi Venkat,
    My BASIS people solved the issue, they applied some patches to the system. Then it got set. You please check with your BASIS team.
    Regards,
    Chandu.

  • Reg : Getting error while approving leave request

    Hello Experts,
    Manger is getting and error message u2018Work item 000000000000 cannot be readu2019 while
    Approving the leave request of one his reportee. This error is triggering for only one
    Reportee. 
    Experts please kindly help us.
    Regards,
    Raj

    Hi Raj,
    There are a number of issues that could cause this.  Can you share your scenario (where is manager approving the request - via SAPGUI, ESS, MSS?)  Are you using an SAP standard workflow?
    Plus, there are lots of threads in SCN on this topic.  Have you checked any of these?
    Good luck,
    Sue

  • Reg. Error while Full load - process chain

    Hi,
    I am running a process chain, which is a full load. In Manage screen it is in RED status whereas, While i chekced in Monitor screen it is showing as "Missing messages" . While I checked in the error and warning messages, I found that the data packet should be run manually. So I tried Manual update option by killing the job manually. After doing this i tried to run the same process with "Back to Technical Status" option. While performin this again i got an error saying  "REQUXXXX terminated, as data packet 0000XX could not be locked"
    How this error can be rectified.
    Please advice.
    Thanks in advance!!!
    Regards,
    Melissa

    Hi Melissa.....
    While i chekced in Monitor screen it is showing as "Missing messages"........where did u got the message.............in the data packet.......right...........?..........
    I found that the data packet should be run manually. So I tried Manual update option by killing the job manually..................which job u hav killed........? Extraction Job?If u hav killed the Extraction job........then Manual update is not possible..............Manual update is only possible when the Extraction job will get completed successfully........
    Due to this u r getting the Error Message error saying "REQUXXXX terminated, as data packet 0000XX could not be locked"....................When the request itself does'nt exist............how could u do Manual update for that deletedrequuest........
    Then only option is..............make the QM status red.............delete the request from the target and repeat the load.........
    Hope this helps.......
    Regards,
    Debjani........

  • Reg: webservices  error  in  xi

    Hi ,
    Iam new to xi and  had developed a http to web service scenario and the response i got an error
    Result:  
    <SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText></SAP:Error>
    so in the receiver soap adapter  in module tab  i have given
    Module name - localejbs/AF_Modules/MessageTranspormationBean
    Type - Local Enterprise Bean Module - This is defined by the user, but the same name should be given in the module configuration for passing the parameters. In this case “transform” In the module configuration ,
    Module key - In this case “transform”
    Parameter name - TransformContenType
    Parameter Value - text/xml;charset=utf-8
    I got an error
    Result:  
    <SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: local bean not found: localejbs/AF_Modules/MessageTranspormationBean</SAP:AdditionalText></SAP:Error>
    the websevice is
    http://www.webservicex.net/SendSMS.asmx?op=SendSMSToIndia
    Could any one help me out.
    Thanks & Regards,
    Gangadhar.S

    Hi Gangadhar
    If you are  new to SAP XI , then its better to read TIBIT. Below are the links of TIBIT which are very helpful in understanding the End-to-end process of XI. And you can even do some exercies here which are very helpful.
    TBIT40:
    https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
    TBIT41:
    https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
    TBIT42:
    https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
    TBIT43:
    http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
    TBIT44:
    https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
    later you can follow this link which contains step by step blogs for http to webservices
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_weblog&query=httptoweb+service&adv=false&sortby=cm_rnd_rankvalue
    Thanks
    sandeep
    PS: if helpful plz reward points

  • Reg: Proxy error while fetching data from RFC's

    Hi All,
    I am fetching data from RFC's. When the data is in bulk I am getting an error like:
    Proxy Error
    The proxy server received an invalid response from an upstream server.
    The proxy server could not handle the request POST /webdynpro/dispatcher/sap.com/pb/PageBuilder.
    Reason: Error reading from remote server
    When the data is samll only I am not getting any error and am able to fetch it easily. Please suggest me something in this regard.
    Thanks in advance,
    Gaurav

    Hi Detlef / Gowtham,
    Now I am able to fetch data from flat files from OWB Server as well as OWB Client.
    One way I have achieved as suggested by you
    1) Creating location on the OWB Client
    2) Samples the files at client
    3) Created & Configured external table
    4) Copy all flat files on OWB Server
    5) Updated the location which I created at the client.
    Other way
    1) Creating location on the OWB Client
    2) Samples the files at client
    3) Created & Configured external table
    4) Copied flat files on the sever in same drive & directory . like if my all flat files are on C:\data at OWB Client then I copied flat file C:\data on the OWB Server. But this is feasible for Non-Windows.
    Hence my problem solved.
    Thanks a lot.
    Regards,
    Manmohan

  • Reg. Error message during Purchase order more than PR.

    Dear Sir
    After putting Purchase order for a Purchase requisition we can able to rise Purchase order for a PR. We a error message. Kindly give the solution this problem.
    How to set error message in this case.
    Thanks
    Rajj.

    Hi
    If u want to restrict PO creation with more than PR Qty u can set error message in OME0 or path as follows
    SPRO>Materials Management>Purchasing>Environment Data>Define Attributes of System Messages-->system message
    06 076
    Set the message no : 06 076 as error messages.
    Then when All The PR qty already convert to PO,then system will not allow another PO to created for this PR.
    Vishal...

  • Reg. Error in material BRICKS order 10003000 item 0000

    Dear Experts
    When I do confirmation in CO11N i am getting the following error
    Error in material BRICKS order 10003000 item 0000
    Message no. RU119
    Diagnosis
    The data necessary for automatic goods movements in a confirmation is incomplete or contains errors.
    System Response
    Automatic goods movements were not carried out. Instead, the system wrote error records.
    Procedure
    Process the error records in one of the following transactions: If the variable parameters are appropriately set then once the confirmation has been created the system asks you whether you want to process the error records. If you answer is "yes" then the system branches to the material overview where you can carry out processing. You branch to the transaction for reprocessing error records from automatic goods movements.
    Pls help me
    Thanks in advance
    Rajakumar.K

    Quantity and Value update tick is made in OMS2 - MATERIAL TYPE then this problem is solved.
    by myself
    Edited by: Raja Kumar on Aug 26, 2009 2:48 PM

  • Reg runtime error

    hai to all,
    i am trying to run PO bapi. suddenly i am getting runtime error as
    "Data objects in a Unicode program are not convertible"
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLGRAP" had to be terminated because one of the  statements could not be be executed.                                                                               
    This is probably due to an error in the ABAP program.                        
    i tried to debug the entire program , runtime error occurs immediately after executing.
    please let me know how to correct the error
    regards
    vijay

    Hi,
    This may be due to some structure incompatibility. use function module 'pi_bp_move_unicode' to move the structures, there by avoiding dumps. The imported parameter from the FM should be sent to the BAPI.
    If this is useful, award points pls..
    Regards,
    Bharadwaj

Maybe you are looking for