Reg: system status NoMP(No make to order)

Dear experts ,
I am into PP module , i wanted to know one of the setting in SD module.
We are working on Variant config scenario (Make to order , strategy group : 25 ) ,
I observed one of the status profile "NoMP"(No make to order ) associated in sales order.when this will get appear and will get resetted..?
What is the use of this status profile in sales order.
From where this status profile is getting assigned to sale order . How can i change this status profile..?
I checked in against the item category in config level , status profile is not assigned , but in sales order its appearing.
Regards,
Daya.

Some what right direction provided by vemuri santosh kumar
FYI,
Cost - To be costed
NoMP - No Make to Order
Further, you can refer and review following SAP Help:
- Checklist for Cost Object Controlling with Sales-Order-Related Production
Thanks, JP

Similar Messages

Reg. System status of Plant maintainance work order.

Hi All,
I have a req. where we need to fetch all the PM orders on some conditions and calculate planned and actual costs.
I want to know what is the system status when costs are supposed to exist.
thanks.

Hi,
As you are aware there are two types of costs.
1 planned Cost this will get updated irrespective of your order system status. As soon as you maintain Material or Opertion with activity type.
Even if you select exterenal cantrol key in operation, what ever you give the cost while filling the data for PR generation will pick up for planned cost. Simillarly for material PR too.
2. Actual cost this wil get update when you post the material or confirm the operations. You can post material provided your order system status is REL released That means you can say actual cost posting will happen provided order is released.
Hope it's help ful.
Reg,
N.Nagaraju

Error-System status FMAI is active in Order....

This error I'm getting while releasing one previously generated maintenance order.
The error message details are;
Diagnosis
Object ORD 5000060696 has system status FMAI (FM account assignmt incomplete). According to this status, transaction 'Release' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
Can anybody reply, how to resolve this.

hello!
I think that your FM assignment is not completed.
The FM account assignment for PM orders is automatically determined only
once during the order creation. There is no automatic call of the FM
account assignment derivation afterwards if you change, for example, a
functional location. You will have to run Goto -> Assignments -> Funds
Management to redetermine the account.
Good luck!
silvia

System Status I0126 for Plant Maintenance orders

We want toallow users to Cancel Orders. I have found the status code but it is not available for our PM orders. How can we activate the status and how will it affect purchase requsitions against the order?

Hi,
As you found there is no concept of a cancelled PM order.
Before order release you can set a status NCMP/I0015 (not completed). That is set from IW32 with menu:
Order - Functions - Complete - Do not execute
That also automatically sets business closed (CLSD) status. This setting can not be revoked.
-Paul

PP-PI - System status LKD for a process order - how to set/unset it

Hi gurus,
I need some help.
I have to lock / unlock process orders inside a program (not manually).
I would like to do this without using Batch Inputs, which are not reliable.
I know the function STATUS_CHANGE_INTERN can modify the order status; but I don't know if the result I get is the same I get doing manually: "Process order" --> "Functions" --> "Restrict processing" --> "Lock"/"Unlock".
Can anybody help me?
Thanks in advance.
J.

Hi
I found this thread which is talking about Internal Order Status change and also a solution for the same.
[Status change|http://forums.sdn.sap.com/thread.jspa?threadID=1516496]
Br,
Vijay V

Allowed Transaction by system status in Process Orders

Hi all:
I have a problem manging the process orders, related to the system status and allowed transaction. The question is: How could I prevent the use of certains transaction (i.e. RFBU FI:Postings) when system status = TECO in one process order where status profile is not assgined (that is t003O-STSMA not filled)?.
At this moment I have a lot of process orders in that status and I want to avoid the posting from FI just if the system status = TECO
I will thank you very much for any help
Best Regards

As a standard setting, you will not be able to restrict the financial postings when an order is TECO'ed but you may do it through by enhancing user exit/ BADI in the respective transaction...

System Status - SRM Portal

HI all,
When I change the quantity on the Purchase Order above the tolerance ( which is 3 % of the Purchase Order Quantity in this case ), I get two errors,
1. u201COver Delivery cannot be more than 3.0%. Please change the confirmed quantity for the line item 0000000010. u201C
2. System Status - INCM active (SUS Purchase Order Response 5000u2026)u201D .
I could understand the first error as the changed quantity is above the tolerance. I am not sure what the second error means? Could anyone please explain me as to what does INCM active mean?
P.S: The second error is seen by one of the suppliers who is using supplier portal externally and is not allowed to click on the tab ' Update Prices' on the purchase order.
Many Thanks,
Shilpa

Hi,
INCM means 'Incomplete'.The document is incomplete.
BR,
Disha.

Check the system status

Hi,
I have a simple question for you..
How can I check the system status when i save my order...
The purpose is not save orders whith errors.
Thanks,
Hugo.

Hi Hugo,
You need not do anything with the status.
Just create a BADI Implementation for the BADI definition ORDER_SAVE in SE19.
In the method PREPARE, call the function module CRM_MESSAGES_CHECK_FOR_ERRORS to check for errors in the order. If there are errors in the order then call the function module CRM_MESSAGE_COLLECT to show the additional error message 'Order can't be saved as it contains error' and exit.
You can also do any additional validation that you want. Save and activate the BADI implementation.
Now create an order and see if the code written works or not.
<b>Reward points if it helps.</b>

How to see system status in spro. How to assign business transaction to user status.

Hi All,
How to see system status in spro. can we change system status in spro for maintenance order.kindly share.
Also share how can we assign business transaction to user status for maintenance order

Peter,
You cannot see the system-status in SPRO.
You can view the system-statuses via BS23.
Be warned - it is NOT advisable to change the system-status setting as you may screw-up your system. Remember that many statuses are used across multiple objects and multiple modules.
PeteA

Reg Update Order System Status

Hi,
My requirement is, while doing TECO (technical complete) of maintenance order I want to check for open reservation/requisition in maintenance order. and if we found any any open reservation/requisition then order status TECO will not update. maintenance order will remain in present status. any other update done in this order before TECO will save.
Please suggest how I can acheive this.
I tried to use uesr exit IWO0009 and BADI WORKORDER_UPDATE but not abe to update order system status in this point.
Please suggest me any EXIT or BADI or Solution for this requirement.
Regards,
Atul

Hi Atul,
Following codes can be help u for Open PR before TECO.
*& Include           ZXWO1U03
EXIT_SAPLCOIH_004
DATA: BEGIN OF IT_EBAN OCCURS 0,
        BANFN LIKE EBAN-BANFN,
        BNFPO LIKE EBAN-BNFPO,
        EBELN LIKE EBAN-EBELN,
        LOEKZ LIKE EBAN-LOEKZ,
      END OF IT_EBAN.
DATA: IT_AFKO LIKE AFKO.
DATA: BEGIN OF IT_AFVC OCCURS 0,
         BANFN LIKE AFVC-BANFN,
      END OF IT_AFVC.
DATA: X_AUFPL LIKE AFKO-AUFPL,
      X_BANFN LIKE AFVC-BANFN,
      STR TYPE STRING.
SELECT SINGLE AUFPL
   FROM AFKO
     INTO X_AUFPL
       WHERE AUFNR = CAUFVD_IMP-AUFNR.
IF SY-SUBRC = 0.
SELECT SINGLE BANFN
     FROM AFVC
       INTO X_BANFN
         WHERE AUFPL = X_AUFPL
           AND STEUS = 'PM03'." Extenal Service Control Key"
SELECT BANFN BNFPO EBELN LOEKZ
     FROM EBAN
       INTO TABLE IT_EBAN
         WHERE BANFN = X_BANFN.
ENDIF.
LOOP AT IT_EBAN.
IF IT_EBAN-EBELN = '' AND IT_EBAN-LOEKZ = ''.
    CONCATENATE 'PR' IT_EBAN-BANFN 'is not converted to PO.TECO is disallowed' INTO STR SEPARATED BY SPACE.
    MESSAGE STR TYPE 'E'.
ENDIF.
ENDLOOP.

Updating system status of CS order when rejecting quotation

Hello,
this is the issue I have.
I am using RRB process to make quotation for CS orders (SM02) trough DP80. All is ok if I have only one quotation, but my intention is to document negotiation process by rejecting quotation that customer didnt accept and make new quotation based on changed pricing. Standard SAP does not allow this because while CS order has system status QUCR - Quotation created, it is not possible to make new quotation, even if the quotation is fully rejected.
The object type ORI that controls system status has only two statuses that refer to quotation QUCR and QUAC (accepted). The status QUCR can only be removed if quotation is accepted or if quotation is deleted.
It seams illogical not to have the opportunity to reject quotation and make a new one. But I can not see the way...if some one knows how it can be done, please give me the answer.
BR,
Milan

hi
iam also having same requirement
can u please let me know whether your problem is resolved.
regards
swetha

Maintenance order system status

Hi Guys,
Currently system status in maintenance order is not in sequence, so user is getting confused about the status. I have suggested for user status which is more precise to get to knwo the status, but they want the system status also updated to be in sequence so that they can look at the last status and update to whomever enquiring abt that, also they asked me to change the descriptiion of the order status. I think we can do that update in table "TJ02T" with the ABAP'ers help as I dont have acces to update the table, but tell me how I can make the system status to display it in sequence in maintenance order, anything we can control over configuration or we need developers help to update the functional module "STATUS_TEXT_EDIT".
All your help are really appreciated. Thanks in advance.

Thanks for your advise. I have already talked ot them to use the user status in case of better understanding the status.The users are specific about the active status which means in each update of teh order they want the latest status to be listed in the top, but in maint. order after release once the goods movement is posted the release status is still listed top and then followed by goods posted status, also when you do time confirmation the confirmation status listed below release status and above goods posted status. Finally when you TECO the order the released staus is gone and TECO listed top which is fine but settlement rule created status listed at the bottom of the statuses which they dont want, they want teh active status should be listed in sequence every time order is get updated and they want to see what are steps order gone thru.
If I define the user status profile and want to update automatically the user statuses when the updates are done, for example I have define the initial step as created and want to updated automatically to release status when order is released, same way for each updates, How we can do this is there anyway we can control thru config or we have go for development???? pls let me know the procedure. I have already created the user statuses with priority and assigned to order types.

How to get system status and user status of service order

Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh Bathla

Hi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu

How to change system status of order created in IW31

Hello All,
I created a maintenance order in IW31. System status of that Order is like this,
Now i have a requirement to change the system status.
But the BAPI : BAPI_ALM_ORDER_MAINTAIN has option to change user status. Please suggest what i have to do?
Thanks in Advance

EXIT_SAPLBSVA_001 will fulfill your requirement.
Try to change your system status inside this exit.
You will get both User status and System status.

IDoc missing system status in sales orders at one or more item pos..

Hi Guys,
I have a smalll querie.
When i process idoc of the sales order , few of the items system status are missing.
Please help me out.
Thanks in advance

veera
can you explain little bit clear...
Ramesh

Reg: system status NoMP(No make to order)

Similar Messages

Maybe you are looking for