Reg; Table for link between plan and sales organization for a material

Hi,
I created a material for two plants and maintained one sales org, now i wnt to know the table to find the link betwen plants and sales organization wtih respective materials.
Pls Help me......
Thanks,
Anto.

hi,
check tables MVKE, MARC and MARC...
You can view them in SE16/SE11 tcode...
Regards
Priyanka.P

Similar Messages

  • SD-How to find table of link between delivery and sales order?

    Hi Experts,
    I have a requirement as below.
    In LIPS table (SD document: Delivery: Item data), in this table has one kind data.
    One record has maintianed 2 fields PSPNR(Project definition (internal)) and PS_PSP_PNR(Work Breakdown Structure Element (WBS Element)).
    How to find sales order number of the above record? Could you tell me which table link the delivery item data and sales order number?
    Thanks a lot,
    Frank

    Hi frank
    Check the following tables  VBAP , VAPMA , VBUP . It may help you
    Regards
    Srinath

  • Link between Delivery and Sales Order Schedule Line

    Hi Gurus,
    I have a requirement in which i need to display quantity and amount at schedule line level and also the delivery and delivery item for each schedule line.
    For example, if there is a sales order O1 and item 10 for which we have 3 schedule lines and 3 deliveries as well say D1, D2 and D3.
    Report should be something like this
    Sales Order    Item   Schedule Line    Delivery    Del Item   Confirmed Order Qty
    O1                 10      1                       D1           10            5
    O1                 10       2                      D2            10            5
    O1                 10       3                      D3            10            4
    How can i determine that a particular delivery corresponds to which schedule line of that saler order-item?
    We have the link between delivery and sales order but is there any way that we can get the link of delivery at schedule line level?
    Please help.
    Regards,
    Gaurav

    Hi,
    I suppose you must check with SD functional consultant and the post should also be in the logistics SD forum and not BI. But I suppose there is know specific link between the schedule line of SO to the Delivery. It is more like a bucket flow for ex.
    Sale order   Item    Schedule line  qty
    SO1            Item1     Sch1            10
    SO2            Item1      Sch2           10
    Delivery Item QTy
    DO1       IT1   15
    DO2       IT1    5
    In this case qty 15 is distributed over both SO1 and SO2, and SO2 ITem1 Sch2 has link to both the DOs
    So I am not sure if you can establish a one to one link, please check with your SD consultants.
    Regards,
    Ashwin G

  • Link between Class and characteristics created for that class

    Hi All,
    Is there any table that I can look at to find a link between class and the characteristics created for that class. For all the list of characteristics created I am refereing to CABN table but my requirement is to find the logic to see all the characteristics created for a class. Can anyone suggest me the right table to look at?
    Regards,
    Shane

    Hi,
    I would like to thank you for your quick response. So based on your thoughts, here is the process i followed to find the characteristics for a existing class,  took the Internal class number and used the KSML table to find all the Characteristics created for that class.
    To find the list of values assigned to that characteristics, used the AUSP table for that characteristics internal number.
    Thank you again for your inputs
    Shane.

  • Link between Project and Sales Order

    Apart from sales order can we have a link between project and customer master ??
    I know that WBS element assignment can be made in sales order but i want to have link between
    customer master and project. I don't want any user field or text field in sales order.
    Any idea ?
    Regards
    Ashish

    Yes Mr Ashish!
    As far as iam concern there is no link between Project & Customer Master, you have to link it with SALES order, I had check in XD03,XD01, the complete customer master, i didnt find any field in customer master which links with Project.
    I'll let you know if i find any links.
    Regards,
    ANSAR

  • Link between PO and Sales Order?

    Hi,
    I have an issue..I need to send an idoc containing PO with fields (like ebeln, lifnr...etc). Along with this PO, I need to send a field 'customer po number (vbkd-bstkd)' from sales order.
    Could you please help me out to find out the link between purchase order and sales order? how to fetch customer purchase order number from po number?
    Also what is the difference between Purchase order number and Customer purchase order number?

    The customer purchase order number is the number of the purchase order which you get from one of your <b>customers</b>. This number is copied in the sales order, for future reference.
    On the other hand, the purchase order is the order you send to one of your <b>vendors</b>.
    Thus the sales order and the purchase order are two indipendent objects. The customer purchase order number does not reference any document on the ERP. Therefore you can't link a purchase order to a sales order.
    Refer to the SAP Solution forum SAP ERP Sales and Distribution (SAP SD) for this kind of questions.
    Regards, Davide
    Message was edited by:
            Davide Cavallari

  • GUID for relation between BP and Sales Org?

    Hi,
    I need a GUID for the relation between a business partner and the sales org. I already have a GUID for the sales org, and one for the BP, but I also need one for the relation itself in addition to the field RelNr in BUT050.
    What table are these stored in?
    Regards
    Thomas

    Hello Manuel,
    in neither of these tables is a field for a GUID for the relation, there is only one GUID for the business partner set.
    Since my GUID does not really need to be globally unique, but rather locally, I will now use the FM BUPA_MWXT_RELKEY_TO_RELGUID (which basically concats both partner numbers and the partner relationship number).
    Thanks for your help, though.
    Thomas

  • Communicate link between Java and ABAP Stack for https

    I have configured https in both the java and abap stacks (we have a double stack configuration).  Due to our future configuration I have changed the hostnames to fully qualified hostnames per SAP instructions. 
    The question I have is does anyone know what RFC destinations or JCo settings I need to change to make https complete?
    I have the problem where when I fire off the Integration Builder from within the ABAP stack (SXMB_IFR) I get a straight hostname (no domain name).  Where is this configured?  Any help is appreciated..

    Check the exchange profile (Administratio tab in /rep/start/index.jsp page; you will have to enter it manually since it is throwing error from SXMB_IFR).
    Regards,
    Henrique.

  • Link between queries and roles

    Hello,
    Could someone tell me if there is a way to have an overview on the link between roles and queries?
    For example a table which give us a role and the liste of queries which are linked to this role.
    Thanks in advance.
    Hicham

    Hi,
    I also had same query :
    mapping between the query/report and the role with technical names - BI Sec
    Its a bit tricky.
    Actually there are no direct linkage between queries and roles. However, you can look up S_RS_COMP in the roles that will help you identify which all queries the role gives access to.
    Regards,
    Zaheer
    Edited by: Zaheer on Aug 28, 2008 4:19 PM

  • Link between reports and universes and universe name change

    I want to change a universe name.
    What is the impact on my WebI reports and DeskI reports ?
    Is it risky ? Will the link between reports and universes be saved ?
    Does someone know how the link between reports and universes works for WebI reports and DeskI reports ?
    Thanks

    Hello Umberto,
    I recommend to post this query to the [WEBI|SAP BusinessObjects Web Intelligence; and [DESKI|SAP BusinessObjects Desktop Intelligence; forums.
    These forums are monitored by qualified technicians and you will get a faster response there.
    Also, all Webi and Deski queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Link between universes and reports and universe name change

    I want to change a universe name.
    What is the impact on my WebI reports and DeskI reports ?
    Is it risky ? Will the link between reports and universes be saved ?
    Does someone know how the link between reports and universes works for WebI reports and DeskI reports ?
    Thanks

    The Universe name is stored within the data context of the report so the report (deski and webi) refer to a Universe.
    Changing the name of that Universe has a very bad effect: the reports usually stop working!
    In order to change the name, you must manually visit each report and change the Universe associated with EACH QUERY IN EACH REPORT!!  It can be done, but it is time consuming.  And you'll need both Universe names in the CMS until you're done
    Deski -> View Data, Definition, Click on the ... beside the Universe
    Webi -> Edit Query, Properties, Click on the ... beside the Universe
    M

  • Link between code and code groups and inspection type

    Hi All,
    I want to know the link between code and Code Group for UD and inspection type?
    There is an option of choosing Usage selected set in SPRO "Seeting for inspection type".If i dont enter anything there,will it show all the code groups in the system while taking UD?
    Pls guide

    Hi Shreya,
    Yes, the link between code and Code Group for UD and inspection type is specific selection of UD related to specific inspection type.  Ex. there are separate UD codes individually for Goods receipt against PO, Gr against Production or for In-process inspection ets. so If you assign the selected sets at SPRO Inspection type, then while doing UD system will show UD codes related to only that inspection type.
    If you don't enter anything there at SPRO, you will see all the code groups in the system while taking UD and one can get confused in selecting the relevant code.
    so assigning of UD selected sets, plant wise (tick) at " Inspection types" is best practice.
    Best Regards,
    Shekhar

  • Table for link between Accounting document and Billing document

    Which is the table for link between Accounting document and Billing document ?
    Thanks & Regards

    Ø Go to SE16N, enter table BSAD
    Ø In the Reference Field (VBELN) enter the Billing Document no. 
    Tips:
    Ø Make sure that only those billing documents will be considered whose accounting documents actually exists
    Ø No Accounting documents will be displayed for Credits, Free of charge orders and those acc. Documents which have been cancelled.

  • Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

    Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

    you can link
    OOH.invoice_to_org_id=CUST.cust_account_id   -- invoice customer
    OOH.sold_to_org_id=CUST.cust_account_id   -- sold to customer
    OOH.ship_to_org_id=CUST.cust_account_id   -- ship to customer

  • Linking between PP and SD tables

    Hai friends,
    I want one link between PP and SD tables. My requirement is i have planned order PLAF table. i want to link Sales table. Please guide me.
    Thanks and Regards
    visvanath

    Hi
    You can simply link the Sales order No and ITEM
    VBAP-VBELN and VBAP-POSNR with the PP order item table
    AFPO-KDAUF and AFPO-KDPOS and get the Pp related info
    or in Sales tables there is a field called AUFNR in VBAP
    use that for PP order number
    SD tables
    http://www.erpgenie.com/abap/tables_sd.htm
    PP tables
    http://www.erpgenie.com/abap/tables_pp.htm
    Regards
    Kiran Sure

Maybe you are looking for

  • Help with Null Pointer Exception

    Hi, I am working on a simple menu program. It compiles and works correctly except for one item. I am having a problem with Greying out a menu item...... Specifically, When I press the EDIT / OPTIONS / READONLY is supposed to Greyout the Save and Save

  • How to set Reminder to vibrate?

    Hi everybody, this is my first message in this forum I installed the Reminder application on my Nokia C7. I noticed that it beeps even when I set the phone in "meeting", "vibration" or "silent mode". Ringtones and Reminder settings seem to be indepen

  • Mask clipping only works with absolute widths and heights

    Hi all for some reason this works: <s:BorderContainer height="404" width="504" borderColor="0x000000" borderWeight="2" backgroundColor="0x000000" filters="{[dsf]}" cornerRadius="10">                 <s:Group id="mask">                     <s:Rect wid

  • Older saved version of PDF in Adobe reader

    How do I open an older saved version of a pdf in adobe reader. I do not have a 'revert' option. I deleted a section in the document. closed the document and saved. I want to go back to an earlier version of the document to retrieve the deleted sectio

  • Granting Privileges question

    This is not a duplicate post. User Wilhem posted it in the wrong forum. In the below mentioned link, user CD has provided a quick way to grant privileges to another user. But it didn't work for me. Is there something wrong with with the DECODE expres