Reg : Tcode for table maintance generator

Hello,
   I have created the Tcode for Table maintance generator of a table using SE93 which directly goes to the table maintaince generator. My requirement is if i open the tcode i  need to display the custom selection screen before going to the table maintaince generator. How do i do it. please can give me the steps to fulfil the above req.
regards
haritha

Check below thread will be useful to you.
Re: Sending Payment Advice as Email to Vendors
For more information:
Search sdn with key words tcode + table maintainence generator
Regards

Similar Messages

  • Reg:table maintance generator

    hi,
    i have one  z table with 5 fields now i added another one field .
    in sm30 previouly showing in header 5 fields description , but now why the new field description is not visible why???
    i think it should automatically added ...
    please help me regarding this issue.
    thanks

    hi,
    for ur answer.
    but i change again but no..the description (valution class) is not coming .
    i just entered the bslnr field as standard into my z table.
    but why its not displaying in my table maintance generator screen as a header..
    any process is there??
    please let me know.

  • Regarding table maintance generator

    hi experts,
             when ever i use sm30 for the particular table for feeding the data it si showing this error:::: The maintenance dialog for YHREMPSUBGRP is incomplete or not defined..what is the reason behind this as i already activated the function group zsap_hr_incv which i m using in the table maintance generator for the table yhrempsubgrp.,,plz help me.

    Hi Ravi,
    Did you finished, the following steps? Please check again.
    go to se11 check table maintanance check box under
    attributes tab
    utilities-table maintanance Generator->
    create function group and assign it under
    function group input box.
    also assign authorization group default &NC& .
    select standard recording routine radio in table
    table mainitainence generator to move table
    contents to quality and production by assigning
    it to request.
    select maintaience type as single step.
    maintainence screen as system generated numbers
    this dialog box appears when you click on create
    button
    save and activate table
    Thanks,

  • Creating Tcode for Table

    hi Experts,
      Can any one Help meplz, I'm Venkat,I have doubt in Dictionary .i.e how to create transaction code for database table .when i create Tcode for table in Se93 ,it asks abt progarm name,if i given that name as table name it is giveng run time error.

    Hi
    You can create new Tcode from Tcode SE93
    Fill all the attributes
    Give your custom txn name 'ZTXN'.
    Give the Short text for it .... (This short text will appear if u choose this txn as favourites on SAP Easy access)...
    Select the Object type of your program from the 5 radiobuttons that come up..Select 2nd option if its a report program. Press Enter.
    When you go to the next screen, Enter name of the Program(ZPROG) you are intending to make the transcation for ...
    Save the Transaction.
    Now you can type the transaction ... 'ZTXN' in the command bar that will take you to the selection screen of the program ZPROG...
    Regards

  • How to create Transaction code for Table Maintanance generator.?

    Hi,
    I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
    Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
    Thanks in advance.
    Best Regards,
    Paddu,

    Hi,
         Check the below steps......
    1. Go to Tcode u2018se93u2019.
    2. Select ' Transaction with parameters'.
    3. Then Transaction 'SM30' with click on skip initial screen
          VIEWNAME : XXX9tABLE NAME)
          UPDATE   : X
    4. Maintain the  Table maintenance generator
      Authorization group : &NC&
      Authorization object :
      Function group : name(xxx)
    Maintenance Screens :
    Maintenance type : One step
    Maint Screen No : Overview screen (2)
    If still u have problem I will send u steps with Screen shot ...send me Yr id.
    Regards,
    Biswanath

  • Unable to create table maintance generator

    Hi all,
    I created  z table and trying to generate table maintance but it is giving below error.
    The maintenance object description has no transportable package
    Message no. SV415
    Diagnosis
    You want to generate the maintenance modules for object ZFI10. The correction system is not active for the package $TMP, to which the corresponding maintenance object description is assigned. The function group assigned for the generation has a package which can be corrected.
    System response
    The generation is not performed.
    Procedure
    Either assign the maintenance object description for object ZFI10 to a correctable package, or assign the table for the generation of the maintenance module to a function group with non-correctable packages.
    please suggest me how to assign correctable package.
    Regards,
    Ramprasad

    go to se11 utilities
    ->table Maintaince Genrater
    give your function Group name or make new Function group
    give maintaince screen one or two 
    after that click on create
    the check it on table contents and create Entries .
    or u can check in se80
    gice your function group  name and check the screen or u can change heding of the field title from here

  • Uploading data through Table Maintance Generator

    hi Folks,
             I have created three Custom tables in Solution Manager. i need to create  multiple entries for the tables. but i am very new to table maintanance generator. could any one tel me the step by step procedure (Like what to give for authorization grp and Function grp) to accomplish the task. thnx in advance.
                    santosh....

    Hi,
    Table maintanance Generator is used to manually
    input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator
    follow below steps
    go to se11 check table maintanance check box under
    attributes tab
    utilities-table maintanance Generator->
    create function group and assign it under
    function group input box.
    also assign authorization group default &NC& .
    select standard recording routine radio in table
    table mainitainence generator to move table
    contents to quality and production by assigning
    it to request.
    select maintaience type as single step.
    maintainence screen as system generated numbers
    this dialog box appears when you click on create
    button
    save and activate table
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
    One step, two step in Table Maintenance Generator
    Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
    Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
    please check the link for getting information about table maintenance generator !
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
    http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
    http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
    Regards,
    Priyanka.

  • How to get Tcode for table which has a table maintenance done

    Hi Friends,
    I have one issue.
    How to get the specific Tcode again for the table  to which i have used table maintenance .
    I have generated table maintenance for many tables inside my package.
    If i want specific Tcode for that particular table how do i find it...Is there any way to get that
    Thanks in advance.
    Regards
    kishore

    Hi Gautham,
    I am still having problem... If i give Z* it shows all the Tcodes created with Z.
    For that i will click Display object list and get my Tcodes inside my package..
    But that is not my issue...
    I am sorry if i didn get you properly
    But still i didn find any way for that.
    Will give one sample table which is Ztest. Ihave tcode ztest1.
    Now as u said if i give Z* i will get all Z* tcodes ..In TSTCP table if i execute iam getting only the Tcode fields
    lot of Z names(tcodes) are there. In that how will i find which is mine.I am not getting any parameter fied in output and all..
    please help me.
    Regards
    kishore

  • Regarding populating data automatically in Table Maintance Generator

    hi all,
               I Created one Z Table for three fields Sales District( BZIRK) and Sales District Description (BZTXT) and Person Incharge. I Created Table Maintanance Generator for these three fields.
    in my ZTable after giving Sales District Code(BZIRK)  when i enter Sales District Description(BZTXT) should come automatically. 
    How can i achieve this . Plz send detailed process.
    Please suggest.
    Thanx & Regards
    Remi

    in table maintainance generator screen ..
    .goto menu environment--->modification-->source code..
    u will get the popup with lot of programs inthat select the main program sapl(.....).
    in that u will have following includes  view related include-files
         view related include-files   (never change, please)        *
      INCLUDE LZSDFF00                                . " subprograms
      INCLUDE LZSDFI00                                . " PAI modules
    do ur coding here...

  • How to use table maintance generator

    Hi Friends,
    I wanted to add more data in predefined table. For that  table maintance is allowed with restriction. So anybody will tell me how to proceed for adding more data in table.
    Regards,
    Salil

    Hi Ajay,
    Thanks for ur valuable reply. But i m unable to make entry by both ways. Suppose i m going through se11. How i can judge authorization group & function group.
    I m using crm table. I dont know the authorization group for that table as well as function group. May i choose any thing by F4 & then create entries???
    Regards,
    Salil

  • Hi regarding table maintance generator

    Hi
    I created a Z tabel with fields as in standard table say MARA.
    when I create entries in SM30 i.e table maintanance generator it has to validate the data by checking aginst valid set of values in check table i.e MARA.
    can anybody make me know how to acheive the same.
    regards
    jaya prasanna kumar.D

    You can add that table as checktable aginast those fields for which you need to check those values.
    Please have a look at below links:
    [Creating Foreign Keys|http://help.sap.com/saphelp_nw70/helpdata/en/cf/21eb6e446011d189700000e8322d00/frameset.htm]
    [Foreign Keys|http://help.sap.com/saphelp_nw70/helpdata/en/cf/21ea77446011d189700000e8322d00/frameset.htm]
    I hope it helps.
    Thanks,
    Vibha
    Please mark all the useful answers

  • How to tie tcode to table maintenance generator table

    hi guys,
    i need to use tcode to call table maintenance generator program (the one that is created via SM30 ).
    how can i use module instead of executable program type ?

    > Hi Erwan,
    >
    > I hv followed ur step, but i didnt see this step
    >
    > then in the dynpro fields :
    > VIEWNAME ztable
    > SHOW X
    >
    > i am currently in ver 4.7
    >
    > i only see screen, from module pool, name of screen
    > fields, value
    You type VIEWNAME and SHOW in "name of screen fields",  and put your ztable name and X in "Value".
    matt

  • How to create a tcode for table maitenance

    i have a ztable which is having a maintenace view now  i have to create a transaction code for the given table maintenance please can anyone give me the details how to create it and what steps i have to follow.

    Hi Suleman,
    1) Go to SE11
    2) In Delivery and Maintenance TAB
    i) Delivery Class as A ( most of the times)
    ii) Data Browser/Table View Maint. as "Display/Maintenance Allowed"
    3) Enter the required fields.
    4) Goto Technical Settings.Enter the appropriate data
    5) Then go to Utilities-->Table Maintenance Generator
    i) Enter the Authorization Group (Varies from project to project...when no authorization required give &NC& )
    ii)Function Group as "Table Name"
    iii)Package varies from project to project
    iv)Maintenance Type as "One Step"
    a)Give overview Screen Number (Your own number..but remember)
    b)Single Screen "Any number"(it can be 0 also)
    6) Then click on the white color create button on menu bar(Create)
    7) To view the maintenance Screen Transaction is SM30(There you need to give the table name)
    8) If you want to change the description of the fields,alignment,mandatory,greying the fields,Validations and many more
    goto SE51 enter program name as "SAPL(TABLE NAME) EX:SAPLZH116 and enter the screen number what you gave in the step 5,iv,a.
    9)If u want to have a transaction to table maintenance
    a)Go to SE93
    b)Choose "Transaction with Parameters" Radio button
    c)Give the Package Name which is given in 5,iii
    d)Give transaction as SM30
    e)Choose Skip Initial Screen
    f)In GUI Support Choose all the three options
    g) In the default values Tab
    Name of the Screen Field Value
    UPDATE X
    VIEWNAME (Enter Table Name)
    After doing this goto se93..in 9(a)
    1.In the home page create a prgm name..
    2.give the description below description choose anyone suitable to ur project
    3.Give the program name and screen number
    4.In sap gui area enable all the check boxes...
    cheers
    Mohinder Singh Chauhan

  • What is the use of table maintance generator and how it is used ddic

    hi dear friends
      i would like to know about how the table maintaience generator is used in ddic .i have the step by step processor of that but i would like to know importance and advantages of it .

    Nani,
      With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
    It can be set in transaction SE11 - Tools - Table maintenance generator.
    Table maintanance Generator is used to manually input values using transaction sm30
    follow below steps
    1) go to se11 check table maintanance check box under attributes tab
    2) utilities-table maintanance Generator-> create function group and assign it under
    function group input box. Also assign authorization group default &NC& .
    3) select standard recording routine radio in table table mainitainence generator to move table
    contents to quality and production by assigning it to request.
    4) select maintaience type as single step.
    5) maintainence screen as system generated numbers this dialog box appears when you click on create button
    6) save and activate table
    One step, two step in Table Maintenance Generator
    Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
    Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
    SM30 is used for table maintenance(addition or deletion of records),
    For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
    Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
    It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
    In the SE11 delivery and maintenance tab, keep the maintenance allowed..
    Then come to the SM30 and then enter the table name and press maintain..,
    Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
    Then create,,,
    Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
    We use SM30 transaction for entering values into any DB table.
    First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
    Then it will create a View.
    After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
    For further help look into these links
    http://help.sap.com/saphelp_46c/helpdata/EN/cf/21eb6e446011d189700000e8322d00/frameset.htm
    http://help.sap.com/saphelp_bw30b/helpdata/en/69/c2516e4ba111d189750000e8322d00/content.htm
    Table
    Don't forget to reward if useful.....

  • Authorization for Table Maintance

    Hi friends,
    i need some help ....
    i created table maintanence.Now all users are creating and deleting table entries.
    wht is my problem is ..
    Only particular users will do create and change .....and remaining users will use for display.
    How i can set it ...Plaese tell me...the steps.
    thanks,
    kumar

    hai,
    it may help u.
    In general different users will be given different authorizations based on their role in the orgn.
    We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
    USe SUIM and SU21 T codes for this.
    Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
    If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
    This means you have to allocate an authorization object in the definition of the transaction.
    For example:
    program an AUTHORITY-CHECK.
    AUTHORITY-CHECK OBJECT <authorization object>
    ID <authority field 1> FIELD <field value 1>.
    ID <authority field 2> FIELD <field value 2>.
    ID <authority-field n> FIELD <field value n>.
    The OBJECT parameter specifies the authorization object.
    The ID parameter specifies an authorization field (in the authorization object).
    The FIELD parameter specifies a value for the authorization field.
    The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
    http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
    To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
    Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
    You program the authorization check using the ABAP statement AUTHORITY-CHECK.
    AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
    ID 'ACTVT' FIELD '02'
    ID 'CUSTTYPE' FIELD 'B'.
    IF SY-SUBRC <> 0.
    MESSAGE E...
    ENDIF.
    'S_TRVL_BKS' is a auth. object
    ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
    The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
    This Authorization concept is somewhat linked with BASIS people.
    As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a  profile and that profile in turn attached to a particular user.
    Take the help of the basis Guy and create and use.
    Sy-SUBRC values
    4              User has no authorization in the SAP System for
                   such an action. If necessary, change the user
                   master record.
    8              Too many parameters (fields, values). Maximum
                   allowed is 10.
    12             Specified object not maintained in the user
                   master record.
    16             No profile entered in the user master record.
    24             The field names of the check call do not match
                   those of an authorization. Either the
                   authorization or the call is incorrect.
    28             Incorrect structure for user master record.
    32             Incorrect structure for user master record.
    36             Incorrect structure for user master record.
    check links.
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
    /message/2831202#2831202 [original link is broken]
    sowjanya.b

Maybe you are looking for