Reg. title bar.....have ur points.

Hi all,
I am using SET TITLEBAR 'MYTITLE' WITH 'HELLO FRIENDS' in dialog programming.
Now thing is "HELLO FRIENDS" is not displayed on the title.
Pleas assist me ....
Have ur points.
Regards,
pradeep phogat

when you double click on PBO -> it creates new module,here you will have pf-status as well title bar.
just uncomment title bar -> give some name with singlle quotation -> save and activate.
now double click on name -> here -> give the text -> save -> activate it.
note : Please activate all screens in dialog programs ( Including pbo screen), if you did not activate then you will not get it
Thanks
Seshu

Similar Messages

Fix colour for title bar

how to make title bar have a fix colour for every OS platform ?

I think you can.
Have a look at
setDefaultLookAndFeelDecorated() in the
Javadocs of JFrame and JDialog.
Regards,
Timno, using LookAndFeel will make the colour of title bar dynamic, i will have different colour for different OS.
i want to set a specific colour for title bar in top level container component (JFrame or JDialog), then it will be the colour for every OS and the colour will not change even user set different colour scheme.

Why do I have two title bars - one with the title of the page I'm looking at and another with the new orange drop down menu? Plus I can't get FF4 to save my tabs, even when I go to about:config, why is that?

I downloaded FF4, thinking that it would merely update from my previous installation, but all my tabs were gone. FF looks really weird - here is a link to a picture of it: http://tinypic.com/r/2mwdus4/7 - I have two title bars, my bookmarks toolbar is missing and the tabs are on the bottom. If I go to view => toolbars and click one of them, suddenly the second title bar (with the orange menu) disappers and my bookmarks toolbar comes back (even if I don't click on it in "view"). I can't get the browser to remember my tabs between sessions even though I set it to remember them in my settings. I even changed the browser.showQuitWarning to true in about:config, but it didn't work. What is going on?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut of wacom pen click, i now have to click on the image title bar, how can i fix this please?

ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut or wacom pen click, i now have to click on the image title bar, how can i fix this ?

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

Reg. table transport.....have ur points.

Hi all,
As we know we can't directly put data in table in production server, I've a z table on development server. I used it for validation purpose. So when i'll transport it...how i will put data in production server..
Pleas assist me.
Have ur point.s

Please check the code ..
First create table maintaince.
now create program and add table name in list.
select one of the radio button ,it will take you sm30 and when you create record at Sm30 -> then it will ask request #.
so you can transport the data.
Table diclaration
tables: tvdir.
Selection screento table View
selection-screen skip 2.
parameter p_tabnm(30) as listbox visible length 30 obligatory.
selection-screen skip 1.
selection-screen begin of block s1 with frame title text-001.
parameter: p_radio1 radiobutton group g1,
 p_radio radiobutton group g1.
selection-screen end of block s1.
Add values to list box
at selection-screen output.
type-pools: vrm.
data: name type vrm_id,
 list type vrm_values,
 value like line of list.
name = 'P_TABNM'.
refresh list.
value-key = 'Table name'. " Add your table name
 value-text = text-002. "'Table description'.
append value to list.
call function 'VRM_SET_VALUES'
 exporting
 id = name
 values = list.
start-of-selection.
Get flag of corresponding table view
select single tabname flag from tvdir into tvdir
 where tabname = p_tabnm.
Set flag of corresponding table view
if p_radio1 eq 'X'.
 if tvdir-flag ne 'X'.
 update tvdir set: flag = 'X'
 where tabname = p_tabnm.
 endif.
endif.
if p_radio eq 'X'.
 if tvdir-flag eq 'X'.
 update tvdir set: flag = ''
 where tabname = p_tabnm.
 endif.
endif.
Execute View/Table
call function 'VIEW_MAINTENANCE_CALL'
 exporting
 action = 'U'
 view_name = p_tabnm
 exceptions
 client_reference = 1
 foreign_lock = 2
 invalid_action = 3
 no_clientindependent_auth = 4
 no_database_function = 5
 no_editor_function = 6
 no_show_auth = 7
 no_tvdir_entry = 8
 no_upd_auth = 9
 only_show_allowed = 10
 system_failure = 11
 unknown_field_in_dba_sellist = 12
 view_not_found = 13
 others = 14.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Reset flag of corresponding table view
update tvdir set: flag = tvdir-flag
 where tabname = p_tabnm.
Thanks
Seshu

Updated to Firefox 4b11, now I have two title bars!

I just upgraded Firefox 4, from beta 10 to beta 11, and now it's showing both the "Windows XP" title bar and the "Windows Vista" / "Windows 7" title bar.
Here's a screenshot:
http://i.imgur.com/araTf.png
Not that it bothers me but it looks weird :)
UPDATE: Solved it by hiding the menu bar and showing it again, via right click on the menu bar. Now it shows just one depending on whether the menu bar is hidden or not, but that first-time bug needs to be fixed :P

I have the tab bar always showing, and I had to open a new tab first before walenzack's fix worked.
edit: It looks like this problem is due to either a corrupted user profile, or Firebug. The version of Firebug I'm using is "firebug-1.7X.0a10.xpi" and that seems to break everything. Using an older version, a8, seems to be fine.

Firefox 4 beta 1/2 dont have the window title bar

If i choose to hide the menu bar, I can see the orange "firefox" button but there is no windows title bar that has the min, max, and X buttons. Like this title bar is cleanly chopped off.
However running firefox as admin doesn't have this issue.
== This happened ==
Every time Firefox opened
== after installation

Are you using a persona?
See https://bugzilla.mozilla.org/show_bug.cgi?id=574833 - Installing Persona theme completely covers the caption buttons

Title bar buttons have no color...why?

I have only seen colored buttions in the title bar a handful of times on my iMac since i bought it new. I have searched forums and the web and no anser I can find anywhere.
Does anyone on here have any idea why this would happen? Could it possibly be tied in with the gray screen I get when booting up? I had this issue both before and after I had to swap my internal drive out.
Thanks.
Shawn

I'm doing this from memory, so bear with me.
Go to the Apple Menu in the upper left hand corner of the screen.
Click on it and select "System Preferences..."
Click on the "General" icon.
At the top of the General Pane should be "Appearance:".
Make certain Appearance is set to "Blue" and not "Graphite".

On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.

On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.

I don't actually have an answer for you, but ditto on changing things that aren't broken. Drives me crazy!!

Reg. operation & frequency in PM ...... Have ur points.

Hi all,
Which table link the operation and frequency related data in PM module.
Note :- Here operation means .. which we write in IA05(TASK LIST).
& Frequency means .. which we assign to that operation.
Pleas assist me.
Have ur points.
Regards,
pradeep phogat

Hi yaar..thanx for reply....my requirement is not fullfilled.
pleas understand the req.
In transactin IA05, we make tasklist master.
I want to link (task group->group counter->operation->frequency) in my itab. Pleas suggest me the table in which i can link the operation with frequency.
Very urgent....thanks in advance
yaar Here frequency means the frequncy of operation which we set after clicking on maintenance package.
PLPO Is task-list operation/activity master, contains data regarding operations....there is no field by which i can link the operation with the frequency.
We have some tables of maintence package master....that also don't have the linking field.
following are the tables.
T351P
T351X
T351
T351T
Pleas assist me....

Reg. cursor-selection in module pool....have ur points.

Hi all,
Pleas. help me with a simple example of at cursor-selection in module pool programming.
with simple code & steps
Have ur points.
Regards,
[email protected]

Hi Pradeep,
The Best explanation with example comes from our help.sap.com....
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbabbd35c111d1829f0000e829fbfe/content.htm
Also this might help...
MODULE mod [ AT {EXIT-COMMAND|CURSOR-SELECTION} ]
[ ON {CHAIN-INPUT|CHAIN-REQUEST} ]
[ SWITCH switch ].
... AT CURSOR-SELECTION
The AT CURSOR-SELECTION addition at the event PAI causes the module mod to be called only if
The function used to trigger event PAI has function code "CS" and function type "S"
The cursor is placed on a single input or output field of the screen at the moment of the user action
The call occurs within the usual PAI processing, meaning that the automatic input checks defined in the system or in the ABAP Dictionary are executed and the MODULE statement is called according to its position in the event block. You can use the addition in connection with the FIELD statement.
If the PAI event is triggered under the above circumstances, the function code is not passed to sy-ucomm and the OK field. They keep their previous values.
Note
The function type and function code of a function are determined in the Screen Painter or in the Menu Painter. We recommend to assign function code "CS" in the Menu Painter to function key F2 in order to simultaneously assign the double-click function of the mouse to it. This allows you to assign dialog modules to the selection of input or output fields.
Refer thread: Re: MODULE REQUEST
Hope that helps!!
*Reward useful answers*
Regards,
Naveenan.

Reg. POV in module pool---have ur points...

Hi all,
I m trying to use POV event in module pool, I wrote
PROCESS ON VALUE-REQUEST.
FIELD ZPHOGAT-ROLLNO MODULE ABC.
Here in module ABC is wrote 'break-point'. when i click on F4 help of that field i my break-point is not getting executed.
Pleas help me out...
Have ur point.s
regards,

First make sure everything is compiled, then try an extended check on the main program to make sure you have your variable names, module pool name etc etc synchonised (in case you have a typo in the module or variable name)... then try changing your break-point for "message s398(00) with 'This is my POV' space space space." or something similar.

Reg. lengh of header of alv grid.....have ur points.

Hi all,
-I want to show text on the right side of the header of ALV grid.
-Secondly i have limit of around 60 characters in a line...i want to add more words in the same line.....
see the code...here..
wa_listheader-typ = 'S'.
wa_listheader-info = 'THE FUNCTIONAL LOCATION WISE PERCENTAGE IMPLEMENTAION'.
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
Thanx in advance..
Have ur points.
Regards,
pradeep phogat

Try this
WA_LINE-TYP = 'S'..----
>'H' to print in header
CONCATENATE 'THE FUNCTIONAL LOCATION WISE PERCENTAGE IMPLEMENTAION'.
V_RYEAR INTO WA_LINE-INFO
SEPARATED BY SPACE.
APPEND WA_LINE TO IT_LIST_TOP_OF_PAGE.
Thanks

Reg. call screen stmt.......Have ur points.

Hi all,
I have 2 screens 1000 & 2000 in module pool. In PAI of 1000, i am using CAll screen 2000.
As we know in case of call screen we can come back to the previous screen.
Now when i write leave screen in PAI of 2000. Control is not going to 1000 screen.
Pleas assist me.
Have ur points.
Regards,

Hello Pradeep..
There is also one more point..
You can see in the attributes tab of any screen created in the "Other Attributes"
the following details
Next Screen
Cursor position
Screen group
Lines/Columns Occupied 26 141
 Mainten. 28 141
Context menu FORM ON CTMENU
The next screen always refer the next screen being/to be called..so in screen 2000 pls try putting the next screen as '1000'
Reward if helpful and pls revert if the solution is feasible for the situation
Regards
Byju

Reg. scheduling of program.......have ur points.

Hi all,
I want to schedule a program, so that i'll run automatically at 7 A.M in the morning for 1 year daily.
Pleas let me know step by step.
Thanx in advance& have ur points.
Regards,
pradeep phogat

HI,
Tcode SM36
Here we can Schedule the Executable Programs (Reports) in Background.
Create a Job.
Create the Steps - Assign the Report name and Variant.
Enter the Start Condition.
Save the Job.
Job status can be monitorEd in Tcode SM37
Or
Use the following function modules.
job_open
job_close
Thanks,
Reward If Helpful.

Reg. title bar.....have ur points.

Similar Messages

Maybe you are looking for