Reg: ume configuration
Hello SDNers,
I have to change the client in the portal side from the default client (001) to 300.
I suppose i have to do this in system administration->system configuration->ume configuration.
Is there any other configurations that need to be done ??
Waiting for your advice to proceed.
Thanks,
Abhilash
Hi,
You can change that in two ways as follows:
1. Using visual admin.
- Goto visual admin --> server0 --> services --> UME Provider
- Check for the below parameters.
ume.r3.connection.master.client
ume.r3.connection.master.passwd
2. Using Config tool (Instance must be down)
- Goto to configtool --> switch to configuration editor mode
- expand CTC --> double click "Propertysheet SystemProperties"
- Check for BACKEND_CLIENT, BACKEND_SID, J2EE_ADMIN, J2EE_ADMIN etc.
--Kishore
Similar Messages
-
ERP 2005 IDES Installation UME Configuration Error
Hello All,
I am installing ERP 2005 SR2 .
At the step of UME Configuration it is stopped.
I restarted sapinst but no luck , again stoped sap with mmc and restarted the machine and started the sap and then started the sapinst but there was also no luck.
I really appreciate if some one can suggest me.Thanks a lot in advance
ERROR 2010-10-14 16:20:54
CJS-30059 Java EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile umconfigurator.log: 'Warning :
ERPTRAINING/sapmnt/ER5/SYS/global/security/lib/tools/w3c_http.jar file stated but does not exist !Exception occurred in openJar(
ERPTRAINING\sapmnt\ER5\SYS\global\security\lib\tools\iaik_ssl.jar ) : java.util.zip.ZipException: The specified network name is no longer available at java.util.zip.ZipFile.open(Native Method) at java.util.zip.ZipFile.<init>(ZipFile.java:111) at java.util.jar.JarFile.<init>( JarFile.java:127) at java.util.jar.JarFile.<init>(JarFile.java:65) at com.sap.engine.offline.JarFilter.<init>(JarFilter.java:30) at com.sap.engine.offline.FileClassLoader.openJar(FileClassLoader.java:1131) at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:623) at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600) at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java :578) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)Oct 14, 2010 4:20:52 PM Info: UME configurator (com.sap.security.tools.UMConfiguratorLoad) called for action "setup"PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.pathOct 14, 2010 4:20:53 PM Error: main() [EXCEPTION] com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB. at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool .<init>(DBConnectionPool.java:115) at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38) at com.sap.engine.core.configuration.impl.cache.ConfigurationCache .<init>(ConfigurationCache.java:149) at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236) at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl .<init>(ConfigurationManagerBootstrapImpl.java:60) at com.sap.security.tools.UMConfigModel.<init>(UMConfigModel.java:79) at com.sap.security.tools.UMConfiguratorLoad.main(UMConfiguratorLoad.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke( Method.java:324) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
ERPTRAINING/sapmnt/ER5/SYS/global/security/data/SecStore.properties" is invalid: record with key "$internal/mode" is missing.. at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106) at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145) at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226) at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName (OpenSQLDataSourceImpl.java:197) at com.sa
p.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:112) ... 11 moreCaused by: com.sap.security.core.server.secstorefs.FileInvalidException : File "
ERPTRAINING/sapmnt/ER5/SYS/global/security/data/SecStore.properties" is invalid: record with key "$internal/mode" is missing. at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:391) at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946) at com.sap.sql.connect.OpenSQLConnectInfo.getStore (OpenSQLConnectInfo.java:802) at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783) at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209) ... 13 more
ERROR 2010-10-14 16:20:54
FCO-00011 The step runUMConfigurator with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Doublestack|ind|ind|ind|ind|1|0|runUMConfigurator was executed with status ERROR .Hi Basis,
Note 848950/851251 may solve your problems.
If problem persists, then try copying the CD again to dump location and restart the installation , it appears that sapinst is not able to open jar file.
Hope this is useful
Regards
Umesh -
UME Configuration change for j_user attribute
Hi All,
We have a requirement in portal like users login into the portal with the windows ID(Which is loginuid in the LDAP)(loginuid is synchronized with windows ID) and the further authorizations should happen with the field called uid.
We made change in the UME datasourse xml file as below.
In the attribute mapping ,
<attribute name="j_user"><physicalAttribute name="loginuid"/>
and
<attribute name="uniquename"><physicalAttribute name="uid"/>
After making this changes user couldnt login with the loginuid..
We are getting the following error in the trace file:
===========================================
[]#2#ume.configuration.active#true#
#1.5#000C299E546D002A0000000100000464000423C9E09FC94C#1165249872673#com.sap.security.core.server.jaas#sap.com/irj#com.sap.security.core.server.jaas#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Java###got []: []#2#ume.configuration.active#true#
#1.5#000C299E546D002A0000000200000464000423C9E09FCB79#1165249872673#com.sap.security.core.server.jaas#sap.com/irj#com.sap.security.core.server.jaas#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Java###Received no SAPLogonTicket. Authentication stack: [].#1#ticket#
#1.5#000C299E546D002A0000000300000464000423C9E09FCCB0#1165249872673#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.DataBasePersistence][md=doSearch][cl=19919]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###Perform query: SELECT DISTINCT PID FROM UME_STRINGS WHERE ((PID LIKE ? ESCAPE '\#') AND (((NAMESP=?) AND (NAMESPH=?) AND (ATTR=?) AND (ATTRH=?) AND (UPPERVAL = ?) AND (UPPERVALH = ?))))#
#1.5#000C299E546D002A0000000400000464000423C9E09FE037#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###entry for search with searchfilter (&(objectclass=inetorgperson)(loginuid=user1)) searched in cache#
#1.5#000C299E546D002A0000000500000464000423C9E09FE07B#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###search result found in cache#
#1.5#000C299E546D002A0000000600000464000423C9E09FE07E#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###found principals: no results found#
#1.5#000C299E546D002A0000000700000464000423C9E09FE3FD#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.DataBasePersistence][md=doSearch][cl=19919]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###Perform query: SELECT DISTINCT PID FROM UME_STRINGS WHERE ((PID LIKE ? ESCAPE '\#') AND (((NAMESP=?) AND (NAMESPH=?) AND (ATTR=?) AND (ATTRH=?) AND (UPPERVAL = ?) AND (UPPERVALH = ?))))#
#1.5#000C299E546D002A0000000800000464000423C9E09FF19E#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###entry for search with searchfilter (&(objectclass=inetorgperson)(loginuid=user1)) searched in cache#
#1.5#000C299E546D002A0000000900000464000423C9E09FF1DE#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###search result found in cache#
#1.5#000C299E546D002A0000000A00000464000423C9E09FF217#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###found principals: no results found#
#1.5#000C299E546D002A0000000B00000464000423C9E0A03B38#1165249872704#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.sapmimp.logon.SAPMLogonLogic][md=initBeans][cl=20245]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###LanguagesBean created#
#1.5#000C299E546D002A0000000C00000464000423C9E0A03CE4#1165249872704#com.sap.security.core.util#sap.com/irj#com.sap.security.core.util.[cf=com.sap.security.core.util.ErrorBean][md=ErrorBean(Message)][cl=15715]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Java###message USER_AUTH_FAILED#1#message USER_AUTH_FAILED#
#1.5#000C299E546D002A0000000D00000464000423C9E0A03DB3#1165249872704#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.sapmimp.logon.SAPMLogonLogic][md=executeRequest][cl=20245]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###No command found, forwarding to umLogonPage#
#1.5#000C299E546D00270000001100000464000423C9E0B8A4B3#1165249874314#com.sap.security.core.server.jaas#sap.com/irj#com.sap.security.core.server.jaas#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_4##0#0#Info##Java###got []: []#2#ume.configuration.active#true#
#1.5#000C299E546D00270000001200000464000423C9E0B8A7ED#1165249874314#com.sap.security.core.server.jaas#sap.com/irj#com.sap.security.core.server.jaas#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_4##0#0#Info##Java###got []: []#2#ume.configuration.active#true#
#1.5#000C299E546D00270000001300000464000423C9E0B8A89E#1165249874314#com.sap.security.core.server.jaas#sap.com/irj#com.sap.security.core.server.jaas#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_4##0#0#Info##Java###Received no SAPLogonTicket. Authentication stack: [].#1#ticket#
#1.5#000C299E546D00270000001400000464000423C9E0B8B6D3#1165249874314#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.logon.imp.SAPJ2EEAuthenticator][md=getLoggedInUser][cl=20245]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_4##0#0#Warning##Java###null
[EXCEPTION]
#1#com.sap.engine.services.security.exceptions.BaseLoginException: Authentication did not succeed.
Regards,
Birla.Hi ,
you need to change uniqename too.
<attribute name="uniquename">
<physicalAttribute name="loginuid"/>
change it and test on configutool before activate & restart .
Thanks
Tag -
UME Configuration for 2 groups
Hi All,
We have configured our UME with one LDAP source having group path as 'ou=groups,ou=SAP ePortal,ou=Applications,ou=Intranet,dc=<companyname>,dc=com'.
But if we create a new group, can we configure the XML such that it will have both the groups. Existing one should be as it is and the new one should also be added.
Regards,
GurmatHi
How to configure multiple LDAP datasources?
ans:
a) Note 736471 - UME Configuration of multiple LDAP data sources
b)https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
Example: Configuration of Multiple LDAP Data Sources
http://help.sap.com/saphelp_nw70/helpdata/EN/4e/4d0d40c04af72ee10000000a1550b0/content.htm
Regards
Shridhar Gowda -
UME Configuration Negative Filter failing
I'm currently having a problem putting a negative filter in my UME configuration. Can anyone see what is missing or order that this should be place in the configuration.
<privateSection>
<ume.ldap.access.server_type>MSADS</ume.ldap.access.server_type>
<ume.ldap.access.context_factory>com.sun.jndi.ldap.LdapCtxFactory</ume.ldap.access.context_factory>
<ume.ldap.access.authentication>simple</ume.ldap.access.authentication>
<ume.ldap.access.flat_group_hierachy>true</ume.ldap.access.flat_group_hierachy>
<ume.ldap.access.user_as_account>true</ume.ldap.access.user_as_account> <ume.ldap.access.dynamic_groups>false</ume.ldap.access.dynamic_groups>
<ume.ldap.access.ssl_socket_factory>com.sap.security.core.server.https.SecureConnectionFactory</ume.ldap.access.ssl_socket_factory>
<ume.ldap.negative_user_filter>objectclass=COMPUTER;cn=[test1];</ume.ldap.negative_user_filter>
<ume.ldap.access.objectclass.user>User</ume.ldap.access.objectclass.user>
<ume.ldap.access.objectclass.uacc>User</ume.ldap.access.objectclass.uacc>
<ume.ldap.access.objectclass.grup>Group</ume.ldap.access.objectclass.grup>
<ume.ldap.access.naming_attribute.user>cn</ume.ldap.access.naming_attribute.user>
<ume.ldap.access.auxiliary_naming_attribute.user>samaccountname</ume.ldap.access.auxiliary_naming_attribute.user>
<ume.ldap.access.naming_attribute.uacc>cn</ume.ldap.access.naming_attribute.uacc>
<ume.ldap.access.auxiliary_naming_attribute.uacc>samaccountname</ume.ldap.access.auxiliary_naming_attribute.uacc>
<ume.ldap.access.naming_attribute.grup>cn</ume.ldap.access.naming_attribute.grup>
<ume.ldap.access.server_name>server1.com</ume.ldap.access.server_name>
<ume.ldap.access.server_port>389</ume.ldap.access.server_port>
<ume.ldap.access.default_switch>20</ume.ldap.access.default_switch>
<ume.ldap.access.user>*********</ume.ldap.access.user>
<ume.ldap.access.password>$ume.ldap.access.additional_password.1</ume.ldap.access.password>
<ume.ldap.access.base_path.user>DC=com</ume.ldap.access.base_path.user>
<ume.ldap.access.base_path.grup>DC=com</ume.ldap.access.base_path.grup>
</privateSection>
ThanksI resolved this issue by looking again at the SAP delivered documentation.
-
Error in UME configuration stage
Hi all,
I am installing SAP Netweaver with EHP1 Java application server as a central system.But I am stuck at the step UME Configuration .In UME congigration phase I 'am selecting option USE ABAP (so that administrators can manage users with transaction SU01 ) rather than JAVA Database ( default ).
At the next step of installation ,it is asking for ABAP connection and J2EE engine connection parameters like instance Host,communication user,Administratoe user,guest user.So after providing all these details when Iclick on next button ,it doesn't move to next stage ,also not throw any error message.
When I have checked sapinst_dev log in C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL directory ,its show me :
2011-05-20 11:50:27.939
CJSlibModule::writeWarning_impl()
Execution of the command ""C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install\jlaunch.exe" UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install\lib;C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install\sharedlib;C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install" -c sysnr=00 -c ashost=SAPEBSA1 -c client=100 -c user=SAPJSF -c XXXXXX -a checkOnly -u SAPJSF -p XXXXXX -user_type system -message_file UserCheck.message" finished with return code -3. Output:
Usage : C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install\jlaunch.exe [-options] <arg0> <arg1> ... <argn>
Launch the specified java program
options : [-file=<property file>] (default=jlaunch.properties)
* [-nodename=<node name>] (default=jlaunch)*
* [-app=<application name>] Standalone application*
* -> <property file> = <application name>.properties*
* -> <SAP profile> = <application name>.pfl*
* [pf=<SAP profile>] (default=jlaunch.pfl)*
* [-parent=<pid of the parent process>] (default=0)*
* [-tracefile=<filename>] (default=dev_jlaunch)*
Critical Error
Can't read program properties
-> Internal program error (rc = -1)
INFO 2011-05-20 11:50:27.955 [synxcfile.cpp:427]
*CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)*
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\dev_UserCheck.
TRACE 2011-05-20 11:50:27.955
NWException thrown: nw.ume.generalError:
. DIAGNOSIS: For more details see output of log file:
TRACE 2011-05-20 11:50:28.80 [iaxxdlghnd.cpp:131]
CDialogHandler::doHandleDoc()
Dialog validator of dialog : d_nw_ume_standalone_abap
called by :|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CI_Instance|ind|ind|ind|ind|ci|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|javaconfig|0|NW_UME_Configuration|ind|ind|ind|ind|ume|0|NW_UME_Configuration_Standalone|ind|ind|ind|ind|0|0|askPasswords
returns false without any additional information.
TRACE 2011-05-20 11:50:28.80 [iaxxgenimp.cpp:1248]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
UserCheck JLAUNCH file :
UserCheck.Name = UserCheck
UserCheck.ClassPath = C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install\sharedlib\launcher.jar
UserCheck.mainclass = com.sap.engine.offline.OfflineToolStart
UserCheck.rootPath = C:\Program Files/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/
UserCheck.JavaPath = C:/j2sdk1.4.2_30-x64
Plese give me your valuaable advice.
Many Thanks,
AmitHi,
Here is your options:
1. Login to SAPEBSA1 with SAPJSF and password you provided in the SAPinst. If you are not able to login ... login with any other user like DDIC.
Change user type of SAPJSF to Dialog ( if user not exist then create user SAPJSF) and assign role 1. SAP_BC_JSF_COMMUNICATION_RO and 2. SAP_BC_JSF_COMMUNICATION.
Once you are able to login, then change user type to system and then try to continue in SAPinst.
-Sanjay -
BW install UME configuration error
Hi experts
we tring to install nw2004s sr2 on our windows2003 64bit server. at steps 34 of 49 configurate UME ,there is an error return code 0 .
i checked the log files. it says
Info: UME configurator
(com.sap.security.tools.UMConfiguratorLoad) called for action "setup"
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
java.text.ParseException: cannot read MAC address from [
Windows IP Configuration
Host Name . . . . . . . . . . . . : BWSVR
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter ] using ipconfig /all
at com.sap.bc.krn.perf.PerfTimes.windowsParseMacAddress
(PerfTimes.java:1173)
at com.sap.bc.krn.perf.PerfTimes.getMacAddress(PerfTimes.java:289)
at com.sap.bc.krn.perf.PerfTimes.getMacAddress(PerfTimes.java:260)
at com.sap.tc.logging.UID.getnodeaddress(UID.java:303)
at com.sap.tc.logging.UID.<clinit>(UID.java:59)
at com.sap.tc.logging.GUId.toString(GUId.java:46)
at java.lang.String.valueOf(String.java:2131)
at java.lang.StringBuffer.append(StringBuffer.java:370)
at com.sap.tc.logging.ListFormatter.format(ListFormatter.java:216)
at com.sap.tc.logging.Log.writeInt(Log.java:864)
at com.sap.tc.logging.Log.writeInternalByAPI(Log.java:930)
at com.sap.tc.logging.LogController.writeToLogs(LogController.java:3171)
at com.sap.tc.logging.LogController.messageInternal
(LogController.java:2291)
at com.sap.tc.logging.LogController.logInt(LogController.java:2488)
at com.sap.tc.logging.LogController.logInt(LogController.java:2443)
at com.sap.tc.logging.LogController.logIntByAPI(LogController.java:2242)
at com.sap.tc.logging.APILogger.instrumentIntByAPI(APILogger.java:74)
at com.sap.tc.logging.LogController.addLog(LogController.java:1331)
at com.sap.tc.logging.PropertiesConfigurator.configure
(PropertiesConfigurator.java:1119)
at com.sap.engine.core.configuration.impl.Logging.<init>(Logging.java:57)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init
(ConfigurationManagerBootstrapImpl.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>
(ConfigurationManagerBootstrapImpl.java:60)
at com.sap.security.tools.UMConfigModel.<init>(UMConfigModel.java:79)
at com.sap.security.tools.UMConfiguratorLoad.main
(UMConfiguratorLoad.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
getMacAddress() failed **
trying to get mac address from **
file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\MAC_ADDRESS
Exception : CreateProcess: cat MAC_ADDRESS error=2
getMacAddress() failed **
failed to get mac address with Runtime.getRuntime().exec( cat MAC_ADDRESS )
java.text.ParseException: cannot read MAC address for SAPSOL from [] using cat
MAC_ADDRESS
at com.sap.bc.krn.perf.PerfTimes.voidParseMacAddress(PerfTimes.java:1326)
at com.sap.bc.krn.perf.PerfTimes.getMacAddress(PerfTimes.java:571)
at com.sap.bc.krn.perf.PerfTimes.getMacAddress(PerfTimes.java:260)
at com.sap.tc.logging.UID.getnodeaddress(UID.java:303)
at com.sap.tc.logging.UID.<clinit>(UID.java:59)
at com.sap.tc.logging.GUId.toString(GUId.java:46)
at java.lang.String.valueOf(String.java:2131)
at java.lang.StringBuffer.append(StringBuffer.java:370)
at com.sap.tc.logging.ListFormatter.format(ListFormatter.java:216)
at com.sap.tc.logging.Log.writeInt(Log.java:864)
at com.sap.tc.logging.Log.writeInternalByAPI(Log.java:930)
at com.sap.tc.logging.LogController.writeToLogs(LogController.java:3171)
at com.sap.tc.logging.LogController.messageInternal
(LogController.java:2291)
at com.sap.tc.logging.LogController.logInt(LogController.java:2488)
at com.sap.tc.logging.LogController.logInt(LogController.java:2443)
at com.sap.tc.logging.LogController.logIntByAPI(LogController.java:2242)
at com.sap.tc.logging.APILogger.instrumentIntByAPI(APILogger.java:74)
at com.sap.tc.logging.LogController.addLog(LogController.java:1331)
at com.sap.tc.logging.PropertiesConfigurator.configure
(PropertiesConfigurator.java:1119)
at com.sap.engine.core.configuration.impl.Logging.<init>(Logging.java:57)
at
com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init
(ConfigurationManagerBootstrapImpl.java:176)
at
com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>
(ConfigurationManagerBootstrapImpl.java:60)
at com.sap.security.tools.UMConfigModel.<init>(UMConfigModel.java:79)
at com.sap.security.tools.UMConfiguratorLoad.main
(UMConfiguratorLoad.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Suggested workaround: **
create file C:\Program
Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\MAC_ADDRESS
with hostname and mac address in the following format: **
BWSVR xx:xx:xx:xx:xx:xx
we have tried sap's suggestion. create a file MAC_ADDRESS like that
however, it doesn't work. and also we have tried to off the network card and restart many times. it have no use either.
now what should i do let the installation go on
thanks
ying xieHi,
sorry it is not dev_col
exact file name is
dev_coll
open that file and check is there any error like mac_address fail.
if there is no any error , then retry your installtion .
Thanks
Anil -
hi,
We've installed NW04s for Portal Usage with ABAP+Java Stack together.
Default installation UME configuration is dataSourceConfiguration_abap.xml and by this, users can only be created, maintaned (name, logon lang,...) in ABAP stack, even newly created users need to login first to ABAP stack to take new password before able to login to Portal.
This is not feasible, if we're going to use Portal at Internet.
We need, user may be created within ABAP, but should be maintained within Portal as well.
For this purpose, <b>do we need to switch to another UME Configuration (dataSourceConfiguration_r3_rw.xml or dataSourceConfiguration_database_only.xml)? Or there is an option to enable this need.</b>
RegardsSadly the only option when you install the ABAP stack as part of the portal is that you can only select the ABAP users as a data source. In order to use the portal database as the UME source you need to install the JAVA stack on its own. See the following SAP link help for an explanation - <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/8fdc3fca21eb06e10000000a1550b0/frameset.htm">SAP help UME link</a>
-
EP Nw2004s install fails on UME Configurator: temp license
I am installing EP on AIX. During the install at the UME Configuration phase, it fails when installing temp license. Here is the error log:
WARNING 2006-04-21 11:25:55
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/java14_64/bin/java -classpath /tmp/sapinst_instdi
r/NW04S/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/launcher.jar -Xmx256m com.sap.en
gine.offline.OfflineToolStart com.sap.engine.tools.offlinelikeyinst.InstallFirst
TempLicense /usr/sap/EP6/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/EP6
/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/EP6/SYS/global/security/li
b/tools/iaik_smime.jar:/usr/sap/EP6/SYS/global/security/lib/tools/iaik_ssl.jar:/
usr/sap/EP6/SYS/global/security/lib/tools/w3c_http.jar:/tmp/sapinst_instdir/NW04
S/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRA
L/AS/install/sharedlib:/oracle/client/10x_64/instantclient/ojdbc14.jar /tmp/sapi
nst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/licenseinstaller.properties" finished wi
th return code 13. Output:
java.net.SocketException: There is no process to read data written to a pipe.
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:113)
at java.net.SocketOutputStream.write(SocketOutputStream.java:157)
at com.sap.engine.tools.offlinelikeyinst.MessageHeader.write(MessageHead
er.java:292)
at com.sap.engine.tools.offlinelikeyinst.KeySystemImpl.getHwId(KeySystem
Impl.java:125)
at com.sap.security.core.server.likey.Admin.<init>(Admin.java:535)
at com.sap.engine.tools.offlinelikeyinst.Installer.<init>(Installer.java
:76)
at com.sap.engine.tools.offlinelikeyinst.InstallFirstTempLicense.start(I
nstallFirstTempLicense.java:91)
at com.sap.engine.tools.offlinelikeyinst.InstallFirstTempLicense.main(In
stallFirstTempLicense.java:59)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81
Could not get the hardware key.
Can't install a temporary license key because the hardware key is unknown.
ERROR 2006-04-21 11:25:55
CJSlibModule::writeError_impl()
CJS-20019 Error when installing temporary license. DIAGNOSIS: External systems
are not available. SOLUTION: Check connection to DB and messaging service.
ERROR 2006-04-21 11:25:55 [iaxxgenimp.cpp:653]
showDialog()
FCO-00011 The step installTempLicense with step key |NW_Onehost|ind|ind|ind|ind
|0|0|NW_Java_OneHost|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|14|0|NW_
CI_Instance_Configure_Java|ind|ind|ind|ind|3|0|installTempLicense was executed w
ith status ERROR .
INFO 2006-04-21 11:25:59 [iaxxgenimp.cpp:700]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|in
d|ind|ind|0|0|NW_Java_OneHost|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind
|14|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|3|0|installTempLicense".
//d001k00:Hello All,
I am trying to install Solution Manager 40 on AIX 5.3. I am running into the same licensing error:
"Can't Install temporary License Key - System ID Unknown"
Could not get the hardware key.
java.net.SocketException: There is no process to read data written to a pipe.
Could not get the System ID (SID).
Can't Install temporary License Key because System ID Unknown
I really appreciate if you can post the answer.
Thank you,
Nikee -
Dear all ,
I am using SPnego and Kerberos methode to do a single signOn between the EP 7.0 and the Operating System.
I have created the service user as mentioned in the NOTE ,but when coming to the UME configuration i am confused ,i need to edit the dataSourceConfiguration_adam_readonly.xml file which SAP has provided.I have done that.
Now my question is where to place the edited XML file of the datasource.
Its very urgent Please help me out.
Thanks
Ravi.sHi!
In fact you can place the edited .xml File anywhere you like. You need to upload it from configtool before you can use it. The location should be something that will not be accidentally overwritten and is not world-writable - otherwise feel free to choose any location that suits your needs. <Drive>:\usr\sap\<SID\ might be a good choice for example.
Regards,
Ju00F6rg -
SLD server and UME configuration
Dear Portal Gurus,
I have configured the UME as ABAP datasource (R/3) with client (001). all the things sld is running and able to create jco connections .
iam not able to create users from user adminstration when the client is 001
when i modify the ume configuration with client as 800 and giving proper username and password after restarting the j2ee server iam able to create users . but the problems iam facing are.
1) SLD is not runnining.
2)Logon page language is changed.
3) All the JCO's are not working.
what are the steps to be taken in j2ee server to modify the ume configuration . and successfull running of sld and logon page.
Regards
prasadsolved by me
-
Server0 getting restarted when i access UME configuration
Hai experts,
i have changed UME configuration for ABAP , and for testing the sap system I.e ( through system configuration )when i click on UME configuration tab my server0 is getting restarted , before restart it ends with exit code 666 and starts again. i logged in through sap* to access this.
kindly help me where to modify or any changes has to be done.
thanks in advance..
regards
Arunstd_server0
getThreadDump : Thu Aug 27 10:08:54 2009
FATAL: Caught OutOfMemoryError! Node will exit with exit code 666
================================================================================
java.lang.OutOfMemoryError
Full thread dump Java HotSpot(TM) Server VM (1.4.2_11-b06 mixed mode):
"Thread-113" daemon prio=5 tid=0x05ef7118 nid=0x1c4c in Object.wait() [0x5d84f000..0x5d84fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x270dffc8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <0x270dffc8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at com.sap.engine.cache.util.ReferenceQueueRunnable.run(ReferenceQueueRunnable.java:43)
at java.lang.Thread.run(Thread.java:534
dev_server0
Thu Aug 27 10:13:02 2009
1280 ! com.sapportals.portal.prt.util.AutoClassLoader$ClassPath::_createLocation (290 bytes)
Thu Aug 27 10:13:31 2009
1281 ! com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService::__getTechnicalUser (66 bytes)
1282 com.sap.security.core.srvUser.imp.ServiceUserFactory::checkForServiceUser (243 bytes)
1283 ! com.sap.security.core.util.cache.BaseTechCacheWrapper::get (86 bytes)
1284 java.util.Arrays$ArrayList::size (6 bytes)
1285 java.util.Arrays$ArrayList::get (7 bytes)
Thu Aug 27 10:13:33 2009
1286 EDU.oswego.cs.dl.util.concurrent.ConcurrentReaderHashMap$HashIterator::nextElement (5 bytes)
Thu Aug 27 10:13:41 2009
1287 ! com.sapportals.portal.pcd.pl.PlAttribute::cloneKeepReadOnlyFlag (97 bytes)
1288 com.sapportals.portal.pcd.pl.PlAttribute::clone (12 bytes)
Thu Aug 27 10:13:45 2009
64% ! java.lang.ref.Finalizer$FinalizerThread::run @ 0 (21 bytes)
Thu Aug 27 10:13:50 2009
1289 java.util.HashMap$Values::iterator (8 bytes)
1290 s oracle.jdbc.driver.OraclePreparedStatement::clearParameters (29 bytes)
Thu Aug 27 10:13:51 2009
1291 com.sap.sql.sqlparser.SQLLexer::makeToken (7 bytes)
1292 com.sap.sql.sqlparser.CheckGroupVisitor$WhereChecker::visitColumnReference (32 bytes)
1293 ! com.sap.engine.services.dbpool.spi.LocalTXManagedConnectionImpl::commonCleanup (84 bytes)
1294 com.sap.engine.services.dbpool.cci.ConnectionHandle::<init> (81 bytes)
1295 com.sapportals.portal.pcd.pl.AttributeValuesTable::readAttributeValue (662 bytes)
1296 oracle.sql.CharacterSet::conv3ByteUTFtoUTF16 (71 bytes)
1297 com.sapportals.portal.pcd.pl.PlFactory::getInteger (72 bytes)
1298 oracle.sql.CharacterSet::conv2ByteUTFtoUTF16 (36 bytes)
1299 oracle.sql.CharacterSet::isHiSurrogate (16 bytes)
1300 oracle.jdbc.driver.T4CClobAccessor::processIndicator (156 bytes)
1301 com.sapportals.portal.pcd.pl.PlAttribute::setInternalNoEmptyLocaleMapping (114 bytes)
1302 s com.sapportals.portal.pcd.pl.PlBiDirectionalCache::getObject2 (54 bytes)
1303 ! com.sapportals.portal.pcd.pl.PlAttribute::readTextValue (102 bytes)
1304 ! com.sapportals.portal.pcd.pl.AttributeHeadersTable::selectSubtreeObjectsAttributeHeaders (145 bytes)
Thu Aug 27 10:13:52 2009
1305 com.sapportals.portal.pcd.pl.PlFactory::composeAttributeString (96 bytes)
1306 oracle.jdbc.driver.T4C8TTIClob::read (297 bytes)
1307 com.sapportals.portal.pcd.pl.PlAttribute::setInternalNoEmptyLocaleMapping (114 bytes)
1308 com.sapportals.portal.pcd.pl.PlLocaleCache::getLocale (118 bytes)
1309 com.sapportals.portal.pcd.pl.PlFactory::isLazyReadLocale (40 bytes)
1310 ! com.sapportals.portal.pcd.pl.AttributeValuesTable::selectSubtreeObjectsAttributeValues (145 bytes)
1311 java.lang.Long::hashCode (14 bytes)
1312 oracle.jdbc.driver.T4CTTIoer::processError (187 bytes)
Thu Aug 27 10:13:53 2009
1313 ! com.sapportals.portal.pcd.pl.AttributeValuesTable::selectById (91 bytes)
1314 s java.util.Hashtable::size (5 bytes)
1315 java.lang.Integer::equals (29 bytes)
1316 java.util.Hashtable$Entry::clone (41 bytes)
1317 ! com.sapportals.portal.prt.util.AutoClassLoader::loadClassLocally (127 bytes)
1318 com.sun.naming.internal.ResourceManager::getInitialEnvironment (131 bytes)
Thu Aug 27 10:13:54 2009
1319 com.sap.security.core.srvUser.imp.ServiceUserFactory::getUniqueNameMapping (36 bytes)
Thu Aug 27 10:13:58 2009
1320 com.sapportals.portal.prt.deployment.descriptor.ServiceList::getService (72 bytes)
1321 com.sapportals.portal.prt.deployment.descriptor.PropertyList::load (102 bytes)
1322 com.sapportals.portal.prt.deployment.descriptor.FilteredNodeList::getLength (17 bytes)
Logs at the time of restart....
Edited by: Arun Rajan on Aug 27, 2009 7:17 AM
Edited by: Arun Rajan on Aug 27, 2009 7:19 AM
Edited by: Arun Rajan on Aug 27, 2009 7:20 AM -
UME configuration : datasource and logonticket
Hello,
Can somebody explain me or give infos on UME configuration for logonticket and datasource for SAP R/3. System : ABAP/JAVA on the same stack (NW2004s).
Thanks
Best regardsHi,
For logon tickets please, refer the link below.
http://help.sap.com/saphelp_nw2004s/helpdata/en/e8/6bc22a4686714d963e9efb77cfbcb5/frameset.htm
For dataSource ABAP configuration, you need to set the following properties in the configtool
ume.persistance.data_source_configuration = dataSourceConfiguration_abap.xml
r3.connection.master.ashost : <Backend server name>
r3.connection.master.client : <Client id>
r3.connection.master.sysnr : <Backend system number>
r3.connection.master.user : <communication user name> (the sapjsf or communication user which we created in backend system)
r3.connection.master.password : <communication user password> (it is the password of the com user which is in the backend system)
ume.login.guest_user.uniqueids : Guest user id (same as Guest, createed in the backend system)
login.ticket_portalid : yes (If administrator id length is more than 12 charcters ex: administrator)
: No (If administrator id length is less than 12 charcters ex: j2ee_admin)
Thanks
R.Murali -
Phase: UME configuration parameters
sapinst_dev.log:
Dialog validator of dialog : d_nw_ume_standalone_abap called by :|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Standalone|ind|ind|ind|ind|0|0|askPasswords
returns false w
returns false without any additional information.
Please inform the installation development.
Hi 请问,在安装 NW700 SR3的时候,有谁遇到过在上面的这个问题。
×installaion停止在Phase: UME configuration parameters解决了,需要装正确的SCSCLIENT.SAR
-
Multi-Domain LDAP UME configuration
Hello
We have EP 7.0 installed and want to connect the UME to our Corporate
LDAP (MSADS) as data source.
Our ADS is as follows:
domain.pt u2013 This is our top level domain. Here we have our main users.
Gs.domain.pt u2013 This is a child domain of ren.pt. Here are some special
users that cannot be moved to domain.pt level (because of this we have to
use multi-domain configuration)
According to some documents Step 2 of Note 762419 - Multi-Domain Logon
Using Microsoft Active Directory this configuration as to be done
according to a Multiple-Domain UME LDAP Configuration.
Following is is my configuration of LDAP access:
I have set the u201CUME LDAP Datau201D in Config Tool to point to
the u201CdataSourceConfiguration_ads_readonly_db_with_krb5_multipledomain.xmlu201D configuration file that has been previously change by me following previous documents. The xml is is the end of the message
Also in the u201CUME LDAP Datau201D (Directory Server) I have defined the following settings:
Server Name: dc01.domain.pt (This is the DC of domain.pt)
Server port: 389
User: j2ee-pp3 @domain.pt
Pass: ******* (ok on all configuration tests and authentication)
SSL: NO.
User Path: DC=domain,DC=pt
Group Path: DC=domain,DC=pt
Checked the u201CFlat User Group Hierarchyu201D.
Checked the u201CUse UME Unique id with unique LDAP Attributeu201D.
At u201CAdditional LDAP Propertiesu201D I have set the properties of
ume.ldap.unique_user_attribute(global) and
ume.ldap.unique_uacc_attribute(global) to userprincipalname. This was
done according to the Multi-Domain configuration.
Also ume.ldap.access.multidomain.enabled=true was set the property
sheet of the UME service. After this all checks are ok including in
User Administration in Portal.
Conclusion: We have no problem with SSO and search capabilities
at u201Cdomain.ptu201D level. All users of this domain are able to access the
portal with SSO.
Nevertheless no user from u201Cgs.domain.ptu201D is able to logon. Additionally,
using User Admninistration in Portal with option u201CAll Data Sourcesu201D
returns no results when searching for users from this child domain. It
seems the the configuration file does not recognize gs.domain.pt.
Is it possible that our xml file is incorrectly adapted? Is there any
missing or wrong configuration for multi-domain LDAP access? Please
advice.
Thanks in advance
dataSourceConfiguration_ads_readonly_db_with_krb5_multipledomain.xml
<?xml version="1.0" encoding="UTF-8"?>
<!-- $Id: //shared_tc/com.sapall.security/630_SP_COR/src/_deploy/dist/configuration/shared/dataSourceConfiguration_ads_readonly_db_with_krb5_multipledomain.xml#6 $ from $DateTime: 2004/08/20 09:55:24 $ ($Change: 17140 $) -->
<!DOCTYPE dataSources SYSTEM "dataSourceConfiguration.dtd">
<dataSources>
<dataSource id="PRIVATE_DATASOURCE"
className="com.sap.security.core.persistence.datasource.imp.DataBasePersistence"
isReadonly="false"
isPrimary="true">
<homeFor>
<principals>
<principal type="group"/>
<principal type="user"/>
<principal type="account"/>
<principal type="team"/>
<principal type="ROOT" />
<principal type="OOOO" />
</principals>
</homeFor>
<notHomeFor/>
<responsibleFor>
<principals>
<principal type="group"/>
<principal type="user"/>
<principal type="account"/>
<principal type="team"/>
<principal type="ROOT" />
<principal type="OOOO" />
</principals>
</responsibleFor>
<privateSection>
</privateSection>
</dataSource>
<dataSource id="CORP_LDAP"
className="com.sap.security.core.persistence.datasource.imp.LDAPPersistence"
isReadonly="true"
isPrimary="true">
<homeFor/>
<responsibleFor>
<principal type="account">
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="j_user"/>
<attribute name="j_password"/>
<attribute name="userid"/>
<attribute name="logonalias"/>
</attributes>
</nameSpace>
</principal>
<principal type="user">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="firstname" populateInitially="true"/>
<attribute name="displayname" populateInitially="true"/>
<attribute name="lastname" populateInitially="true"/>
<attribute name="fax"/>
<attribute name="email" populateInitially="true"/>
<attribute name="email"/>
<attribute name="title"/>
<attribute name="department"/>
<attribute name="description"/>
<attribute name="mobile"/>
<attribute name="telephone"/>
<attribute name="streetaddress"/>
<attribute name="uniquename" populateInitially="true"/>
<attribute name="krb5principalname"/>
<attribute name="kpnprefix"/>
<attribute name="dn"/>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.usermanagement.relation">
<attributes>
<attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
</attributes>
</nameSpace>
<nameSpace name="$usermapping$">
<attributes>
<attribute name="REFERENCE_SYSTEM_USER"/>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
<principal type="group">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="displayname" populateInitially="true"/>
<attribute name="description" populateInitially="true"/>
<attribute name="uniquename"/>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.usermanagement.relation">
<attributes>
<attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE"/>
<attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.bridge">
<attributes>
<attribute name="dn"/>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
</responsibleFor>
<attributeMapping>
<principals>
<principal type="account">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="domain_j_user">
<physicalAttribute name="samaccountname"/>
</attribute>
<attribute name="j_user">
<physicalAttribute name="userprincipalname"/>
<attribute name="logonalias">
<physicalAttribute name="userprincipalname"/>
</attribute>
<attribute name="j_password">
<physicalAttribute name="unicodepwd"/>
</attribute>
<attribute name="userid">
<physicalAttribute name="null"/>
</attribute>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
<principal type="user">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="firstname">
<physicalAttribute name="givenname"/>
</attribute>
<attribute name="displayname">
<physicalAttribute name="displayname"/>
</attribute>
<attribute name="lastname">
<physicalAttribute name="sn"/>
</attribute>
<attribute name="fax">
<physicalAttribute name="facsimiletelephonenumber"/>
</attribute>
<attribute name="uniquename">
<physicalAttribute name="userprincipalname"/>
</attribute>
<attribute name="loginid">
<physicalAttribute name="null"/>
</attribute>
<attribute name="email">
<physicalAttribute name="mail"/>
</attribute>
<attribute name="mobile">
<physicalAttribute name="mobile"/>
</attribute>
<attribute name="telephone">
<physicalAttribute name="telephonenumber"/>
</attribute>
<attribute name="department">
<physicalAttribute name="ou"/>
</attribute>
<attribute name="description">
<physicalAttribute name="description"/>
</attribute>
<attribute name="streetaddress">
<physicalAttribute name="postaladdress"/>
</attribute>
<attribute name="pobox">
<physicalAttribute name="postofficebox"/>
</attribute>
<attribute name="krb5principalname">
<physicalAttribute name="userprincipalname"/>
</attribute>
<attribute name="kpnprefix">
<physicalAttribute name="samaccountname"/>
</attribute>
<attribute name="dn">
<physicalAttribute name="distinguishedname"/>
</attribute>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.usermanagement.relation">
<attributes>
<attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
<physicalAttribute name="null"/>
</attribute>
</attributes>
</nameSpace>
<nameSpace name="$usermapping$">
<attributes>
<attribute name="REFERENCE_SYSTEM_USER">
<physicalAttribute name="sapusername"/>
</attribute>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
<principal type="group">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="displayname">
<physicalAttribute name="displayname"/>
</attribute>
<attribute name="description">
<physicalAttribute name="description"/>
</attribute>
<attribute name="uniquename" populateInitially="true">
<physicalAttribute name="ou"/>
</attribute>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.usermanagement.relation">
<attributes>
<attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE">
<physicalAttribute name="null"/>
</attribute>
<attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
<physicalAttribute name="null"/>
</attribute>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.bridge">
<attributes>
<attribute name="dn">
<physicalAttribute name="null"/>
</attribute>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
</principals>
</attributeMapping>
<privateSection>
<ume.ldap.access.server_type>MSADS</ume.ldap.access.server_type>
<ume.ldap.access.context_factory>com.sun.jndi.ldap.LdapCtxFactory</ume.ldap.access.context_factory>
<ume.ldap.access.authentication>simple</ume.ldap.access.authentication>
<ume.ldap.access.flat_group_hierachy>true</ume.ldap.access.flat_group_hierachy>
<ume.ldap.access.user_as_account>true</ume.ldap.access.user_as_account>
<ume.ldap.access.dynamic_groups>false</ume.ldap.access.dynamic_groups>
<ume.ldap.access.ssl_socket_factory>com.sap.security.core.server.https.SecureConnectionFactory</ume.ldap.access.ssl_socket_factory>
<ume.ldap.access.objectclass.user>User</ume.ldap.access.objectclass.user>
<ume.ldap.access.objectclass.uacc>User</ume.ldap.access.objectclass.uacc>
<ume.ldap.access.objectclass.grup>organizationalUnit</ume.ldap.access.objectclass.grup>
<ume.ldap.access.naming_attribute.user>cn</ume.ldap.access.naming_attribute.user>
<ume.ldap.access.auxiliary_naming_attribute.user>samaccountname</ume.ldap.access.auxiliary_naming_attribute.user>
<ume.ldap.access.naming_attribute.uacc>cn</ume.ldap.access.naming_attribute.uacc>
<ume.ldap.access.auxiliary_naming_attribute.uacc>samaccountname</ume.ldap.access.auxiliary_naming_attribute.uacc>
<ume.ldap.access.naming_attribute.grup>ou</ume.ldap.access.naming_attribute.grup>
<ume.ldap.access.pwd.via.usercontext>true</ume.ldap.access.pwd.via.usercontext>
<ume.ldap.access.set_pwd>true</ume.ldap.access.set_pwd>
<ume.ldap.access.multidomain.enabled>true</ume.ldap.access.multidomain.enabled>
<ume.ldap.access.extended_search_size>200</ume.ldap.access.extended_search_size>
<ume.ldap.access.domain_mapping>
[DOMAIN_PT;DC=domain,DC=pt]
[GS_DOMAIN_PT;DC=gs,DC=domain,DC=pt]
[gs;DC=DC=gs,DC=domain,DC=pt]
[domain;DC=pt]
</ume.ldap.access.domain_mapping>
</privateSection>
</dataSource>
</dataSources>
Edited by: Joaquim Pereira on Feb 7, 2009 1:34 PMHi Gaetano
I tried to set back the "uniqueid" in the XML to samaccountname.
Also, i changed the spnego to go only to domain.pt (gs.domain.pt is a child domain).
In the 1st tests this worked perfectly, but we still to do some testings with this config.
When i get confirmation, ill reply here.
Thank you.
PS:. we thought on defining the abap user for each user, but there are a lot of users...
we'll try this config, and if it doesn't work, probably, thats what we'll do.
Edited by: Joaquim Pereira on Feb 12, 2009 5:45 PM
Everything seams to be working now. setting back the uniqueid to samaccountname and configuring spnego to go to only 1 domain solved the issue.
I just need to test which change did the trick.
Edited by: Joaquim Pereira on Feb 13, 2009 1:02 PM
Maybe you are looking for
-
please help i need to fix my itunes it will not launch on my computer . no error message appears it simply will not run. the icon on desktop has changed to a white folder and it still appears in programmes in start menu but will not open. it appears
-
How do I get video (.f4v) to play and sync side by side powerpoint slides
I have a talking head video (converted to .f4v) that I would like to position on the left side of the screen and sync with a powerpoint deck on the right side of the screen. Does anyone know how to accomplish this in Adobe Captivate?
-
Can't import photos from my iPhone to iPhoto.
Usually once I connected my iPhone, iPhoto is automatically opened and all the pictures can be imported. However, now the pictures won't show in iPhoto anymore. Can anyone help? Thanks.
-
Some question about image component
Hi, I encounter two questions when using image component and can't solve it myself after reading online document. 1. How can I get image source at runtime? I find image.source return an Object class, but not the source image path. 2. How to ensure im
-
Updates faild to install (adobe design premium cs5)
I keep having this same error every time ii try and run the updates. Can you advise as to where I can download and install directly Thanks for your time and advise on this matter Daniel Adobe Bridge CS5 4.0.5 Update There was an error downloading t