Reg Unable to find URL for Adapter Engine Error
Hello,
During execution of a scenario, i am getting these errors in sxmb_moni:
AE_DETAILS_GET_ERROR
3: Unable to find URL for Adapter Engine af.xip.poecspxioo4
Error when reading the access data (URL, user, password) for the Adapter Engine.
Seems like it is a problem of XI Server unable to locate the Central adapter engine due to some parameter not set properly.
So, what are the points we can check while installation of XI so as to rectify this problem.
Hi all,
I got the similar error in my scenario and i solved the same.Actually i ma not pretty surte this will solve your problem.
In my case proxy generation settings was mis configured in the sender system. so its caused the reason.
I made an entry in the SPROXSET table and i did other activities like RFC and application system also.
Then its worked for me. Its not matching with your case please do ignore this one
Regards
Vijay
Similar Messages
-
No_messaging_url_found: Unable to find URL for Adapter Engine
Hi,
I am facing the same problem. I have configured a RFC-File scenario.
I get the error"no_messaging_url_found: Unable to find URL for Adapter Engine af.<SID>.<server>"
and <INTERNAL.AE_DETAILS_GET_ERROR>
I get the error "no_messaging_url_found: Unable to find URL for Adapter Engine" when I execute the Function Module SAI_AE_DETAILS_GET.
This error occured in the line 235( sap_xi_adapter_services = sld_accessor->associators( iref = sap_xi_adapter_framework assocclass = 'SAP_HostedXIAdapterServi) of the FM.
The value is not filled and i get the error mentioned.
I have gone through thread and verified all the points mentioned.
I have checked SXI_CAHCE,there are no locked users in RSUSR200,
SXI_CACHE, Goto->AdapterEngine Cache, I have an entry af.<sid>.<server>
In SLD,Technical Landscape,Exchange Infrastructure I have the entry <SID>.<Server> against the Adapter Engine
But as was mentioned in the thread the line 241 of the Fucntion Module has 'adapterType' and not 'Adaptertype' as in the exchange profile.I did not try changing 'a' to 'A'.
Could you please let me know how to solve the problem.
Thanks in advance.Hi Vani,
Check the pipeline URL in the SLD
Business System->URL
It should be
http://host:HTTPport/sap/xi/engine?type=entry
Just check this thread- may be useful-
File Adapter - Sender Problem
RFC adapter - AE_DETAILS_GET_ERROR - no adapter engine
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps,
Regards,
Moorthy -
Unable to find URL for Adapter Engine af.xid.xidev ?
Hi,
I have scenario.
Abap proxy -
> ccBPM -
> RFC (synchronous).
The error happen for ccBPM -
> RFC
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.xid.xidev</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any idea for what happening ?
Cheers
FernandHi.
Have you tried with this
Re: Wrong Adapter Engine on RWB?
Regards
Seshagiri -
Unable to find URL for Adapter Engine
Hi,
We have installed the XI 7.0 and I have realized a simple scenario "File > XI > File" in order to validate the installation... and on has a dump around Adapter Framework.
Inside SXMB_MONI, on has the following error:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xid.bcnssap006</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xid.bcnssap006</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.xid.bcnssap006</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
It's probably a problem with aii but which one ?Hi Mickael,
The problem that you are facing looks like it is unable to connect to the adapter engine itself, please check the following:-
The userid being used must have the authorizations of group SAP_XI_APPL_SERV_USER on the Integration Server.
*During the configuration of the adapter (From Help documentation):-
<i>Specifications for the Integration Engine
Enter the complete address (URL) of the Integration Engine that you want to send the message to:
XI.TargetURL=http://IntegrationEngineHost:port/pipeline-arguments
This specification is mandatory.</i>
One suggestion:- Please try the following and see if you are still facing the problem, this might help you in decreasing the number of places to verifyconfigurations!
Again, from help:-
<i>The Integration Engine address can also be accessed dynamically from the SAP System Landscape Directory (SLD). The following entry is added to the configuration for this purpose:
XI.SLDConfiguration=SLDaccessor
In this case the URL of the corresponding Integration Server for the system specified with XI.SenderService is read from the SLD and used instead of the value specified under XI.TargetURL. Therefore, specify the following:
XI.TargetURL=<fromSLD>
To be able to access the SLD, the SLDaccessor service must be configured correspondingly and the respective entries must be maintained in the SLD.</i>
Hope this helps!
-Sushumna -
Error : Unable to find URL for Adapter Engine
Hi Experts,
I have searched several forums , but i am not clear on how to resolve this error.
I am using XI 3.0, my scenario is File->XI->File
I am getting this error in SXMB_MONI.
*Can any body suggest me a clear step-by-step procedure to solve it.*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Message canceled
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xd2.host-dev</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xd2.host-dev</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xd2.hydrus-dev</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
saiHi Debashish,
Thanks for ur reply,
I have executed
--->Execute SAI_AE_DETAILS_GET from se37
>Enter AE name:<host>.<systemid>
After executing, i got these param
Exception NO_ADAPTER_ENGINE_FOUND
Message ID: SAI_GLOBAL Message number: 016
Message:
no_adapter_engine_found: Unable to find Adapter Engine host-DEV.XD2
Exchange profile parameters are like this
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
and i dont have authorizations for SU01 fro lock/unlock.
Any suggestions how to proceed.
Thanks
Sai -
How to get Alerts mail for adapter engine errors in SAP PI 7.0
Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed. -
Alert for adapter engine error
Hello experts
We have configured the alerts for the adapter engine errors .We have configured the variable &SXMS_TO_ADAPTER_ERRTXT& element which is having the CHAR70 type for getting the adapter engine error text in the alert inbox.so for any adapter engine error greater than 70 chracters ,it is getting truncated to 70 chracters only.but we want to have the whole adapter error log text.
Can anyone please throw some light on this.
Thanks
sabyasachiMoha,
It seems that it cannot support more than that.
Problem with Alert Text
Re: Message Size in ALERTS
It is worth taking a look at this blog:
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Regards,
---Satish -
Abap tables for adapter engine errors
Hello,
Which ABAP tables in PI will have the data relating to adapter engine errors (like the communication channel errors). Is there any way I can get the adapter engine errors from abap tables?
Any help is very much appreciated.
Thanks
MLSHello,
What I am trying to do is write a report in ABAP, which will read the table for errors (for messages which are not processed successfully in Integration engine or adapter engine) and email those errors to users. If there is communication channel error in RWB, the message in sxmb_moni is still shown as success and is not being updated in table SXMSPERROR.
We cannot use PI Alerts here since the email list is dynamic for the same PI interface.
Any ideas on how to accomplish this?
Thanks
MLS -
In my Component monitoring i got this error for Adapter engine status.
In my Component monitoring i got this error for Adapter engine status. Status is in red..
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.03.server3, string], target element type: SAP_BusinessSystem)
Please clarify ASAP..
Thanks..HI,
See below links you will get ..
Process Integration (PI) & SOA Middleware
ERR:Could not find SLD name for XI Application "DIRECTORY"
Unable to find an associated SLD element
Regards
Chilla.. -
Error in gettnig logon data for Adapter Engine
Hi,
We have Http > XI > RFC Scenario. We are getting 401 unauthorized error in "CALL ADAPTER" section. From the trace its clear that the logon data for the adapter engine (there is no value for USER in trace) is not getting poulated. We fixed this issue last evening....i think by doing full cache refresh, but this problem propped up again today. Yesterday when this issue was fixed the USER has "PIISUSER" in the trace.
We haven't changed any config settings since yesterday so all the passwords and other config info is same. Not sure what's causing this issue. Below is the trace. Any help will be highly appreciated.
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: RFC</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.ppi.dac-sapd1</Trace>
<Trace level="3" type="T">URL = http://dac-sapd1.actv2.com:8007/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User =</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="System_Error">HTTP-client: error response= <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b> 401   Unauthorized</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/7.00 </b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b> Authentication did not succeed.</b></font></td> </tr> <tr bgcolor="#FFFFFF"> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><b> Details:</b></font></td> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><pre> No details available</pre></font></td> </tr> </body> </html></Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 401</Trace>Hi,
go to the exchange profile.
there u need to maintain the password for the XIISUSER.
I think u need to restart the J2EE Engine for the changes to take effect.
Regards
Cornelius -
Basic URLs of adapter engine associations properties are missing
Dear all
We are running on the nw 7.11 pi version.
And we recently enabled the ssl on the system.. we have HA in place with web dispatcher.
We updated the exchane profile parameter with all ssl n required parameters.
CPA cache refresh is working fine.. but. While doing the Intergration server ABAP cache its failing.
And we checked the sap note 1678104 under the XRIA assoctiation and as well as under the Basic urls of adapter engine "Secure URL" properties are missing . Since we r not able to update this property.. the adapter engine is still ponting to http url instead https.
Please see the screen shot.
Regards
Manoj KHi Agasthuri,
yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
Hi Praveen,
in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
I checked the MDT, but there are also no messages displayed.
End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
Best regards,
Daniel -
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
Macbook 4,1
Early 2008 15" macbook pro
Running Snow Leopard
the Battery was not working after only 23 cycles
I tried the Battery update and now it will not boot at all
I really do not want to loose my data on the drive
panic message is
Unable to find driver for this platform: "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Please helpPanic Message
panic(cpu 0 caller 0x000x563ebd) : Unable to find driver for this platform:
"ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Debugger called: <panic>
Backtrace (CPU 0), Format - Frame : Return Address (4 potential args on stack)
(7 lines of hex)
BSD Process name corresponding to current thread: Unkonwn
Kernel version:
Darwin Kernel Version 10.8.0" todays date ; root:xnu-1504.15.3~1/release_I386
I tried to boot from CD can, but i dont want to loose any information.
Tried disk tools
Hardware test
Tried to check if it was memory sticks failing or battery , nothing else plugged in
if i boot holding Apple key and S
I get additional warnings about AppleACPIPlatform and not being able to load Kext -
Kernel Panic: Unable to find driver for this platform
So, my 1 GM RM, 1.5 GHz Powerbook G4 (15 inches) has been behaving wonderfully lately. Until, this morning, it locked up -- as it sometimes does -- after inserting a 3rd party SATA card and waking it from sleep.
This is normally not a problem. A reboot gets things back on track. Not today. The reboot stayed on the grey screen with the white apple logo. I tried booting off of a Disk Warrior CD and an OS X 10.4 install DVD. I go this kernel panic:
Unable to find driver for this platform: "PowerBook5,6".
But...and here's the best part...if I boot into target disk mode and hook the computer up to another similar Powerbook we have, the similar PowerBook boots fine using my drive.
So, it seems to be a hardware problem with my PowerBook. Any ideas on how I narrow it down?
Thanks,
GaryGlad you found your problem. Our kernel panic on our 15" G4 is a bad logic board. $500+ to fix it. Just found out yesterday.
JWTech -
CCMS Alerts in PI 7.1 for adapter engine
Hi Experts,
Looking for a step by step process to configure CCMS alerts for adapter engine in PI 7.1Hi Shweta,
>>>Looking for a step by step process to configure CCMS alerts.
Please see the belog blogs, it might be helpful to you.
Part u2013 1:
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Part - 2:
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
Part - 3:
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Regards,
P.Rajesh
Edited by: Rajesh_1113 on Mar 22, 2011 12:58 PM
Maybe you are looking for
-
Intego Personal Backup - Restore to a new iMac
Old G5 iMac dies a catastrophic death leaving me with a Lacie external hard drive with backup copies of Clone System & Home Folders created by Intego Personal Backup. New Intel iMac being delivered (with basic software config of MAC OS X & some appli
-
Best Data rate and format for Big Screen Playback
I am a video producer supplying content for a tradeshow display consisting of 18 flat screens oriented vertically, 8 over 8. Very heavy duty Windows playback machine, with 3 graphics cards, 1 for each set of 6 monitors. The total pixel size is 3240x
-
HT4623 after update to ios6 battary of my iphone4 is become very poor
dear sir after evevry update your iphone will become as good as new but this is a very sad news that before update to ios6 my iphone battary will run for atleast 18 hrs but now its very hard to come 8 hrs please help ramesh
-
Hashtable - jdk1.2 vs jdk1.3
hash is Hashtable for (Enumeration e = hash.keys() ; e.hasMoreElements() ;) { System.out.println(e.nextElement()); This program prints the elements in a different order under jdk1.2 and jdk1.3. This means the hashtable implementation is different und
-
Siebel Charts gets generated but does not display in the Web client
Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client There is either no error displayed on the front end... Also note that Charts is installed on Windows environment and