Reg : usage of standard Texts(SO10)

Hi all of u,
  I want to use standard texts ,which were created under Tcode SO10, alone to display output without using them in any of the script or smartforms.Also i want to nw that , is it possible to use Variables inside standard text,which r really exist in report,report is through which i want to make use of ths Texts .The variable are / shuld be  local to this program...
Kindly guide me ....
This will simplifies my work ...
Thanks in advance,
Regards,
Chandra.V

Hi Chandra Shekar,
standard text with variable
SO10 doubt : standard Text
Regards,
Sravanthi

Similar Messages

  • Standard text (SO10) - To print the text in same line

    In Standard text (SO10) I would like to have my text in a single line. For that I have used the extended line (=) tag. But It is not working.
    Can anyone help me how can I achieve this.
    Actually how many characters I can put in a single line. I think it is 72. But my text is less than 72 characters.
    Can anyone Please help me.
    Regards
    Meshack Appikatla.

    A Text Symbol in Script or Smartform can take lenght of Maximum 80 characters. Any thing more than that will be truncated even if the window is long enoguh to hold more than 80 characters. Si your character formated need to be have the PROTECTED option checked.
    At Topic:
    Try increasing the window size in lenght or width, If that is not possible pratically, you can try by decreasing the font size.

  • How to declare variables in standard text  - so10 t.code

    Hello Friends,
             How to declare variables in standard text  - so10 t.code? Your response will be appreciated much.
    Thanks
    Sri

    For Script & Smartform  Text - &VAR&

  • How to display the Standard Text (SO10) based on condition in adobe forms

    Hi,
    I have created the Standard texts (through SO10 tr.code) of 4 plant addresses. In the Layout of adobe form, i want to display any one plant address based on the plant number (as a input) and the rest 3 standard text need to be hide. i tried in Form clac to hide, but i unable to succeed. could you please help me, in this regard. 
    Thank you.
    Regards,
    Mallikarjuna

    Hi,
    You can add all the 4 text in your context menu and create an condition for text.
    Example: (LS_HEADER is a structure only for example, you need to decide based on your own form interface)
    Text_1000                                Condition -> LS_HEADER-WERKS = 1000
    Text_2000                                Condition -> LS_HEADER-WERKS = 2000
    Text_3000                                Condition -> LS_HEADER-WERKS = 3000
    Text_4000                                Condition -> LS_HEADER-WERKS = 4000
    The text satisfyling your condition will only be printed and you can assign these text to the same block in PDF form.

  • How to use stylescreated in se 72 in STANDARD TEXT SO10

    Hi all,
    I have created a style in se72.
    Now can i use the style while creating a stAndard text in SO10 and in script.
    If yes can anyone let me know how to do that
    Thanks

    In SO10 go into change/ create mode and from the menu select FORMAT and in this select CHANGE STYLE. A popup with the styles comes up and just slect which ever you want.

  • How to use standard text  so10

    Hello sir
    Here the problem is i want get three company adress in the script..
    Here i  used the satandard text  (so10)  and created three adress  and i went to address window  type
    There
    i written if exgrp =52
    <b> include zadress 1 text id  language E.
    else exgrp=53
    <b> include zadress 2 text id langugage e.
    this one i did in developement client and  i tested and  imported threw scc1 its not reflecting while exectuing.
    so please tell me how to print the 3 comapny address .. and step by step procedure .
    Thankyou
    Regars
    REDDY

    HELLO sir ,
    I done wt  u said but unable to get that address in script .......
    Please check  the flow once which done by me ......
    firsr created 3 texts and went to  the adress window there i used insert option gave standard text ...
    in the address window i gave
    If P_EXGrp -52( &j_1iexchdr-exgrp&)
    include text 1
    elseif P_exgrp=53
    include text 2
    else if P_exgrp=54
    endif .     this the  way i used if condition i ..........  if i changed the  second statement to Only  to "else" its printing the only else part exectuting  in script .
    and by using  RSTXTRAN progarm transported my request .  and by scc1 imported  but iunable to get Please tell me i didnt change the driver progarm .. selection scrrren &J_1iexchdr-exgrp& is one fileld based on this company code should come .. 
    Please let me know how to get ....wt changes i should make Please
    Thankyou,
    Regards

  • Special Characters not being imported from standard text(SO10) to form

    Hello Experts,
    I have created a standard text in SO10 and tried importing it to the adobe form, i created.  I have maintained some sentences as highlighted and underlined.  Text got imported perfectly on to the form, but the formatting is not being exported.  Could you please help me in this issue.
    Thanks,
    Rakesh.

    Use Text modules instead of standard text

  • How to Maintain documentation (se38) using standard text (SO10)

    Hi,
    I have created standard text using SO10. Now I want to include the standard text in documentation (SE38) section of my ABAP program.
    I tried using /: INCLUDE 'YTEST' OBJECT TEXT ID ST LANGUAGE EN
    But the standard text is not showing up when I click the documentation icon in the selection screen.
    Can you please let me know how to maintain documentation for ABAP programs using Standard Texts.
    Thanks in advance.
    Sincerely,
    Vidya

    Hi Mahesh,
    In SO10, which format key has been used (AS, /*, /:, *.... to show up in documentation). when you used insert->text-> did you use 'expand immediately' check box. If expand immediately option is used, it won't serve our purpose.
    =
      (space)
    Example
    SO10 Yeurope_terms
    Inside Yeurope_terms
    Terms: For Europe
    /*           No Tax for Italy
    Waiting for your reply.
    Sincerely,
    Vidya

  • Standard Text SO10-Purchase Order

    Hi,
    The requirement is like this;
    I have maintained a standard text in Transaction SO10.
    When i create Purchase order first time, it takes the standard text that i have maintained in SO10 when i see the preview. But then if i go to change mode of Purchase order & change/input the header text in Purchase Conditions.After saving it overwrites the standard text & takes the text that i put in Header Text in Purchase condition.
    Now my requirement is even i change the header text of Purchase Condition, it should always take Standard Text that i have maintained in SO10. How i can control this, is there any user exit etc which can help.
    Appreciate your support in this regard.

    why do you delete the standard text in the PO while extending this text?

  • Assign standard text (SO10) in transport request

    Hi Experts,
    How can i assign the standard text i've created in SO10 to a transport request. Thanks!
    Best Regards,
    Kurtt

    Hi,
    Refer note 3355 in OSS for a complete explanation. The SAPscript objects that should be transported must be written in a transport request.
    The entries are as follows:
    R3TR FORM NAME (NAME = Name of the layout set)
    R3TR STYL NAME (NAME = Name of the style)
    R3TR TEXT OBJECT,NAME,ID,L
    (OBJECT = Text object, NAME = Text name, ID = Text ID, L = Text language)
    If you want to transport a number of texts, you can use report RSTXTRAN to insert the individual text keys into a correction. The transport request must be entered and released via the transport system.
    Regards
    Sudheer

  • Standard text SO10

    hi experts,
    I have a requirement where i want to code a program to read all the standard texts available in SO10.
    Could anyone please help me.
    Thanks in advance.
    Moderator message: please work yourself first on your requirement.
    Edited by: Thomas Zloch on Mar 3, 2011 1:46 PM

    Hi,
    Steps..
    Create a work bench CR in the transaction SE09..
    Modify the task to Development correction / Repair..
    Go to the program RSTXTRAN..
    In the name of correction give the task number (Not the CR number)
    Give the Text Key..Your standard text name..
    Press F8...
    Press select all..
    Then Press enter..
    Then press the button "Trsfr texts to corr".
    Now the standard texts will be moved to a CR..
    Then release the CR and move it to QA..
    Thanks,
    Naren

  • Standard text (SO10) - 'Where used list'

    Dear all,
    I would know if SAP provide a standard tool that consents to display a 'where used' list for the standard texts.
    I mean, this report has to show where the standard text defined via SO10 are used (SAPScripts, Smartforms...).
    Thanks and best regards
    Davide

    I doubt if there is such report.
    Enjoy SAP.
    Pankaj Singh.

  • Class for reading and saving standard text (SO10)

    Hi,
    I was using READ_TEXT and SAVE_TEXT to read/save the standard text (S010). Is there any standard class which contains the method to Read and Save the text of SO10?
    I have searched the se24, bu i was unable to find class which can be used.
    Thanks,
    Shrinivas

    If you do a "where used" on READ_TEXT then you will find plenty of SAP methods that call it, so why not just call it directly yourself?  If you do want a class wrapper around it, then it wouldn't take long to build your own "Z_CL_TEXT_HANDLER" class and associated methods.
    Jonathan

  • How to create REQUEST NUMBER for STANDARD TEXT (SO10)

    how to create REQUEST NUMBER for STANDARD TEXT ( t-cODE SO10)

    you can do this using program RSTXTRAN .
    Text key - object
    Text key - name
    Text key - ID
    Text key - language, then it will store under one transport that can be moved to other system.
    check out the following link.
    http://help.sap.com/saphelp_47x200/helpdata/en/f4/b4a1ed453611d189710000e8322d00/frameset.htm

  • Use standard text (SO10) in report(SE38) to compose the body of email

    hello experts,
    here i wanna create the body of email with a format, hence i decide to use Standard Text. in this Standard Text, i also maintain some variable such &p_name&( i remember it works  in forms,such script and ssf), while i define p_name as 'demo' in the program and try to transfer p_name to standard text, it fails. while i check the output of standard text, it show &p_name& instead of demo.
    could anyone tell me how to realize this function?
    Thanks in advance.
    Desmond

    Hi,
    try this,
    data:w_field(10) type c VALUE '1234'.
    DATA:wa_head TYPE THEAD.
    data:it_final TYPE TABLE OF tline.
    wa_head-tdname = 'Z_SAMPLE'.  u201CStandard text,refer screen shot
    wa_head-tdid = 'ST'.
    wa_head-tdobject = 'TEXT'.
    wa_head-tdspras = 'EN'.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
      CLIENT                        = SY-MANDT
        id                            = wa_head-tdid
        language                      = wa_head-tdspras
        name                          = wa_head-tdname
        object                        = wa_head-tdobject
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        = HEADER
      TABLES
        lines                         = it_final
    EXCEPTIONS
      ID                            = 1
      LANGUAGE                      = 2
      NAME                          = 3
      NOT_FOUND                     = 4
      OBJECT                        = 5
      REFERENCE_CHECK               = 6
      WRONG_ACCESS_TO_ARCHIVE       = 7
      OTHERS                        = 8
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REPLACE_TEXTSYMBOL'
      EXPORTING
        endline                = 10
      FORMATWIDTH            = 72
      LANGUAGE               = SY-LANGU
      LINEWIDTH              = 132
      OPTION_DIALOG          = ' '
      REPLACE_PROGRAM        = 'X'
      REPLACE_STANDARD       = 'X'
      REPLACE_SYSTEM         = 'X'
      REPLACE_TEXT           = 'X'
        startline              = 1
    IMPORTING
      CHANGED                = CHANGED
      TABLES
        lines                  = it_final

Maybe you are looking for

  • A few questions from a beginner

    Please don't hit me because of my questions... 1. Is there a build in method (class or whatever) to increase an array size? I don't want to copy the array each time into a larger array and then setting the pointer of the new larger array to be the sa

  • Master data upload via LSMW using IDoc method

    Dear all, I know this has been a topic of many discussions but I would like to ask you is to share your thoughts and possibly experience with the following scenario: Interface between non-SAP system and SAP system has to be built whereby master data

  • Parallel currency 2nd local currency issue

    Good morning everyone, I am handling and issue wherein I am finding a difference in the FS10N GL line items. Background- 1. Doc currency, 1st local currency and 2nd Local currency are the same i.e USD. 2. When I see any GL account in FS10N I dont see

  • Maximum external Hard Drive size for Airport Disk?

    Is there a maximum size for the hard drive that's being connected to the USB port on the new Airport Extremes? Or will it support up to the maximum that's allowed by the USB chipset?

  • How to calibration switch relays

    To NI AE:      I now have a Auto test system which have 2 PXI-2532 Matrixs card.And I want to write a switch calibration program.Use this Program I can know which relay is fault and which relay is ok.I found in NI-MAX,I can use self-test to test swit