Reg User Defaults in CUP

Dear Gurus ,
We are using SAP HR triggers to create SAP Userids for newly joined employees. It is working properly.
we observed that Decimal notation is not getting captured properly. We want to default the same in auto - provisioning.
Please guide how to do the same ?
Rgds,
Saurabh

Hello Sir,
Checked the same. But in user defaults - Name is mandatory . can we give any name or it has some impact while creating id ?
Rgds,
Saurabh

Similar Messages

  • User Defaults for CUP

    Hello Experts,
    I was wondering as to how to display User defaults for all users in their request page i.e.so that they can make changes as needed for their id.
    I tried following pg 176-182 in config guide but it is not showing anything in any user requests.
    Thanks

    Hello Experts,
    I was wondering if users can actually change defaults in user request or can they change it using SU3.
    As when i configured the user defaults,my assumption is that whenever a user is created he/she will receive the defaults defined per system for her account.
    Also what use does the User default system do(my assumption is that the system defined here will be populated automatically for all user requests ...correct me if i am wrong)
    Thanks

  • CUP - Using several Parameters ID in User Default

    Hello everybody,
    I have a problem with using User Default section in CUP.
    In fact I want to use the User Default Mapping to define two different parameter ID in the SU01.
    For example: the Company Code (BUK parameter) and the Cost Center (KOS parameter).
    If I define two different User Default (one for the company code and the other for the cost center) with two different User Default Mapping Condition (Custom fields Company code with the good value for the first one and cost center custom fields for the second one) it doesn't works.
    It seems to use only one User Default even if the both User Default Mapping Conditions are different.
    Does anyone know how to define two different User Defaults that works together?
    Thanks in advance.
    BMW

    BEN,
       I have never tried this scenario. It seems to me that this might not work.
    Regards,
    Alpesh

  • SAP AC 5.3 - CUP (user default)

    Dear All,
    we want to create a request for DELETE ACCOUNT so when we delete a user it will be deleted in all the relevant systems.
    can we use the user default for that ? if yes, how ?
    thanks
    Yudit

    Yudit,
    Do you submit this request manually ?
    If you want to delete the user account , try to trigger this via Hr triggers ,when a employee is  withdrawn in the SAP HR system
    you can  create a rule which could trigger an action to delete the user ID in all the SAP systems , you can add  all the sytems where you want  the user deleted,if the user doesnt exist in certain systems , CUP puts out an error message in the audit log as user doesnt exist in XXX system so it doesnt matter .
    If you are submitting this delete request  manually in CUP and you want delete the user in the portal as well at he same time  you delete him on the backend .
    what you can do is define a dummy role for the backend system where you want to delete the user and map this dummy role to the role or group on the portal system and use this dummy role in defualt configuration  for request type DELETE
    so whenever you submit a request for delete account for a specfic system default Dummy role will be picked and the Portal system will be picked as well due to the role mapping in this way you can achieve this.
    Regards
    Gerry

  • Error encountered during provisioning of user to SAP CUP in OIM 11g R1 BP07

    We recently updated our environment from 11.1.1.5 BP05 to 11.1.1.5 BP07.
    We are facing an issue with provisioning users to SAP CUP system. We receive an error specifying :
    Response: oracle.iam.connectors.sap.cup.ws.submitreq.ObjectFactory
    Response Description: Unknown response received
    However, we are unable to find any errors related in the log file. The SAP UM connector version is 9.1.2.5. Please let us know the cause of this issue.

    1. Login to Design Console and open your GTC provisioning process definition , then Add a new task called "Notify Email".
    2. Check Required for Completion, Allow Cancel and optionally Disable Manual Insert.
    3. In the Integration tab, add tcCompleteTask
    4. In the assignment tab, add an entry with the Default rule, target type of User, and for the User field pick an existing user with a valid email address in their User Profile.
    5. In the Notification tab add an entry and check Assignee, (You can select User, Manager etc ) have the Status field set to C and for the Email field pick a Provisioning type of Notification Template that you have already created.
    N.B: 7. Make sure the IT Resource and email configuration properly otherwise you will not get the mail.
    Thanks
    Tamim Khan

  • Web Dynpro SRM 7.0 - Access Shopping Cart One Screen User Default Settings

    Hi all,
    In my current project I have a requirement which includes to validate the user default values on shop on one screen functionality, my question is, how can I access to this information? In web dynpro there's no reference to this information and in addition is not stored in the database as is only "available" during the current Shopping Cart creation.
    Many Thanks in Advance,
    Sara.

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Add animated gif to JFrame toolbar in place of default coffee cup

    Hi,
    I am sorry if someone has already asked this question. I have searched the forums but only found aswers relating to adding static images to replace the default coffee cup. Is it possible to replace this image with an animated gif? When I add an animated gif with the following code:
    URL imageUrl = myProgram.class.getResource("image.gif");
    ImageIcon icon = new ImageIcon(imageUrl);
    JFrame frame = new myProgramFrame();
    frame.setIconImage(icon.getImage());
    I am loading the image from an executable jar.
    The program fails to load (but produces no errors).
    Thank you for any help you can offer.

    Hmmm ... intrestin, I've just modified a *.gif file of my own to make the icon animated and 'java MyProgram' just hangs at the command line -so, I guess you're stuffed with it. I can't think of a workaround either, sorry

  • Storing user defaults of Web Dynpro application on portal

    Hi folks,
    I am trying to develop Web Dynpro application that runs in an iView on a portal. I would like to remember certain user defaults for this application (e.g., user default plant). User also has control over this value, so whenever they change it, the value should be update on a backend as well.
    My first thought was to use PCD, but I am not sure how to do that - all the code examples for I found for PCD looked like they were created for portal application, not Web Dynpro ones.
    Anybody here actually done anything similar?
    Edited by: Alexei Isaev on Jan 29, 2008 8:20 PM

    Hi Alexei,
    If you need to store default values for a portal application, you may consider your development in Web Dynpro for ABAP.  I have not come across application level personalisation yet in Web Dynpro for Java, unless someone else can throw some light here.
    Regards,
    Subramanian V.

  • How to set user defaults in GRC 10.0

    Dear Experts,
    we are trying to maintain the user default parameters for access request, so that the user default parameters can be provisioned with the access request.
    we've found the note 1615552, but when we following the guide and copy the BRF Function id (80E0ED08B0561DDFA5ADCADA787E1EDA) of "User Defaults" to BRFplus->open object, it shows always "Not a valid BRFplus ID" .
    Can someone advice, how can I find out the right BRFplus ID for user default function or I have to create it by myself??
    Thanks a lot!
    Best Regards,
    Ying

    Hi Ying,
    You have to create first the applications, Functions and rules etc in TA: brfplus and the the Application ID of the function has to be associated to the application id i.e. user defaults and MSMP workflow in the customizing activity:-
    Governance, Risk and Compliance->Access Control->Maintain AC Applications and BRFplus Function Mapping
    I hope this clarifies your doubt.
    Best regards,
    Jatin

  • Report layout with User default and gobal default

    hi,
    any authorization to control report layout, only some user ID can use "user default" layout, and part of user available to set the layout as default
    thanks

    Is is a custom-developed ALV report or an SAP-supplied one?
    If if is custom-developed, you can register the following user-commands
    &AVE - Save layout
    &OL0 - Change layout
    &OAD - Select layout
    in parameter IT_EVENT_EXIT  of REUSE_ALV_LIST_DISPLAY.  When these user-commands are triggered, control passes to the user command routine in your callback program.  In the callback routine, you can implement authorization/security checks.
    Also look at parameters IS_VARIANT and I_SAVE to control use of variants.,
    If it is an SAP-supplied program, try using the auth-object mentioned in my earlier post.

  • Formatting a date according with user settings (user defaults)

    Hi All,
    I need to format a date I receive via JS in YYYYMMDD format according with user defaults <b>without</b> server side action (I know, this is not a good issue, but they want it).
    My solution is to write a JS function (there are a lot of it on WWW) which accepts two strings and formats the first according to the second, something like:
    userFormattedDate = formatDate('20060613','DD.MM.YYYY');
    paying attention to generate 'DD.MM.YYYY' string on server side, according to user settings.
    But if this isn't a weblog, where is the question? :-D
    The question is: is there a JS function (in DatePicker or dateNavigator BSP) provided by standard libraries which serves similar functionality?
    Does exist a JS public standard library?
    Thanks.
    Dany

    Hi Durairaj,
    Tags <% %> are for server side actions.
    The question is about obtaining the same effect, but client side.
    Thanks.
    Dany

  • User Defaults - GRC 10

    Hi All,
    We are on GRC SP13.
    I have configured User Defaults.
    My Decision table has Request Type and User Default ID entries and User defaults are correctly getting updated in the target system based on the connector tagged to User Default ID.
    My scenario:
    New Account Request Type - User selected ECC role and it has mapped BW roles.
    Now User defaults work only for ECC and not BW
    Hence I have tried changing my BRF+ decision table with Connector and Role Connector both, when i include any of these User defaults itself not working.
    Anyone faced the same issue?
    If I have Connector or Role connector in BRF+ decision table, User Defaults don't work
    Already applied SAP note 2020712 - UAM: User group not provisioned after approval
    Regards,
    Sai.

    Hi Sai,
    Could you please check and confirm if you have user defaults action from the request type..?
    As highlighted in the note "you are using "System" as one of the fields in setting the conditions for User Defaults, then try using the option for Implementing a LOOP in your BRF Rule. This might be needed since "System" field is not available under Request Header attributes, rather it is available as Role Attributes which are called as line-item fields while calling the BRF Rule. So, in such cases LOOP is a suggested solution, rather than using the Decision Table directly. Though within the LOOP, you can still call the Decision Table or implement IF/ELSE conditions."
    Better paste some of the snap shots from your BRF+ configurations.
    If you are sure enough that your config is on right track then raising this concern with SAP might be an option.
    Regards,
    Ameet

  • User Defaults - Not saved

    Hi All,
    We are working on SPM 2.1, SP5. Our end users are having a issue while saving the user defaults and the changes are not getting reflected post saving.
    This issue doesnt seem like webservice as I could do it using my ID, i feel it is more of authorization issue.
    We have following roles assigned to the end user.
    SAP_XA_BASIC
    SAP_XA_USER
    Let me know if we are missing any roles for the user.
    Regards,
    Sampat Desai

    Hi Sampat,
    Am not sure if "User Default settings" has anything to do the authorizations.
    Try reducing connection life time in visual admin to around 300-500 sec.
    Regards,
    Deeraj Shetty

  • How to convert internal date to the format of user default setting

    In the BDC program, I need to convert the date, such as the sy-datum 20070427, to the format of user default that is defined in T-code SU01, such as YYYY-MM-DD or YYYY.MM.DD, and so on.
    The user format has 6 six kinds, and it is not good idea to write the code to process. So I look for the functions or CLASS method to process. I can use the function 'ITS_GET_USER_DEFAULTS' to get the user default setting of the Date format and Decimal notation.The problem is that I can not find the function or CLASS method to convert the internal date to user's date format.
    The function: CONVERT_DATE_TO_INTERNAL can not do it.
    The CLASS method: cl_abap_datfm=>conv_date_int_to_ext may be do it. But I do know how exchange the parameters, and fail to make it work finely.
    Is there the functions or CLASS method to process it?
    Thanks a lot!

    Hi John,
    create a veriable :
    data: v_date type char10.
    then after getting the date in YYYYMMDD format, write the following statement.
    WRITE SY-DATUM TO V_DATE.
    this might solve your problem.
    Regards,
    Hemant.

  • User Default Setting in CO11N

    Hi,
    In the Goods movements screen of CO11N, is there some sort of a user default setting where the layout can be customized based on user preference?
    Actually, I just have a problem with the material description because it's quite far from the material number.
    It's tedious to always drag the description beside the material number everytime I branch out to the Goods movements screen.
    Thanks in advance!
    Best Regards,
    Armie

    Armie,
    In the goods movement screen drag the material description as required and also arrange the other fields as required by you. Now scroll fully to the right side of the screen, there you would find a layout button click on that and save the layout as shown in the screen shot in the link...
    http://picasaweb.google.com/prasobh.sap.pp/Demo#slideshow/5345357547508821890
    Regards,
    Prasobh

Maybe you are looking for