Reg: User Entered Value in LOV Window

Hi All,
Following is the use case.
I have an LOV ("PO Number") with its own controller. If user enters a partial value in LOV Field, (say 513),
LOV Window comes up with results like PO Number starting with 513. Suppose, If user modifies the search value from 513 to 913,
LOV query needs to get executed with new search value (913).
Can you please suggest me to capture the new user entered value (913) in the controller.
I tried the following. But, poNum value obtained through below code is 513(old value - value entered in LOV of base page.)
Dictionary passiveCriteria = (Dictionary)pageContext.getLovCriteriaItems();
String poNum = (String)passiveCriteria.get("PosPoNumberInternalLov1");
Is there any other way, i can find out the new user entered value in LOV Window.
Thanks,
Kiran.

Hi Gyan,
My requirement is that, I need to make some processing/manipulation on the user entered search value for the LOV.
If the user enters value in base page, i am able to get the value and process it.
But, If user clicks on LOV Window, enters a new value in search field, i am not able to capture the new value.
Please suggest accordingly.
Thanks,
Kiran

Similar Messages

  • User entered values are lost on EO validation.

    Hi ,
    Subject : user entered values are lost on EO validation.
    WE have an EO which has 4 attributes all are not null (mandatory)
    There is a VO based on this EO
    We have added 4 more attributes using a join in EO query using expert mode.
    On the page there is a Table , that has 8 columns all mapped to these 8 attributes.
    The First column is an LOv that populates 4 column attributes(2 EO based and 2 added thru expert mode)
    When the user submits the page, without entering rest of the two EO mandatory atributes, the EO validation is raised and the 4 fields populated by LOv are cleared.
    Can you pls tell me what am i doing wrong.
    thanks
    Chaitanya

    Observation
    All the table columns that were loosing information were "MessageStyledText" and those not loosing were "MessageTextInput"
    Various approaches
    SO we converted the MessageStyledText columns into MessageTextInput and the data was retaining properly.
    But we wanted these columns are 'ReadOnly' so when we made these columns are MessageTextInput - ReadOnly, then data was not getting popluated by the lov in these.
    Working solution - The FormValue 'Glue'
    We created formValues correcponding columns and populated the FVs also along with the column (both FV and column have same ViewAtt and View instance) and found that in this case the formvalues 'Glues' the VO att value with the page and does not get lost on refresh.
    Strange solution but works, thought to share with all.
    thanks
    Chaitanya

  • How to find the user entered value is Integer or not?

    hi,
    i want to find, whether the user entered value is Integer or not. If it is Integer, i wanna continue the program. otherwise send an error message. i tried to find for function in API. But i couldn't. can somebody help me with sample code. very urgent.

    Do a Integer.parseInt(<string value>) in a try catch block If a NumberFormatException is thrown, the entered number is not an integer.

  • How to get the User entered value in the Submit request form for a parameter of a concurrent program in Oracle applications.

    Hi All,
    I have a requirement where i need to get the user entered value in the Parameter of a concurrent program while submitting it. i tried to query the FND_CONCURRENT_REQUESTS table but in that it stores the ID values from the value set of the Parameter.
    After submitting the Concurrent request when we click on the view Details button it opens a form where it displays the arguments in the parameter field .  i want to get that string.
    Thanks a lot in advance for your time and help.
    - Vijay

    Hi All,
    I have a requirement where i need to get the user entered value in the Parameter of a concurrent program while submitting it. i tried to query the FND_CONCURRENT_REQUESTS table but in that it stores the ID values from the value set of the Parameter.
    After submitting the Concurrent request when we click on the view Details button it opens a form where it displays the arguments in the parameter field .  i want to get that string.
    Thanks a lot in advance for your time and help.
    - Vijay

  • How to Get User entered value in a text variable

    Hi,
    I have made a text variable to show the user entered value in the column header.
    The user enteres value in a formula variable ABC whose default value is say '30'.
    I am using customer exit to capture this value in the text variable. The code is as follows
    IF i_vnam EQ 'txtvar'.
    if i_step = 2.
    LOOP AT i_t_var_range INTO loc_var_range
    WHERE vnam = 'ABC'.
    CLEAR l_s_range.
    l_s_range-low = loc_var_range-low.
    l_s_range-opt = 'EQ'.
    l_s_range-sign = 'I'.
    APPEND l_s_range TO e_t_range.
    EXIT.
    ENDLOOP.
    endif.
    endif.
    Now when I am executing the query I am getting the default value in the column header i,e, 30. But when the user changes this default value to something else while executing the query, I simply get blank in the column. The changed value is not getting captured in the text variable.
    Thanks

    Hi,
    Insted of  going for exit,
    just create a Text variable proceesing typr Default/ Manual Entry and set the default value as u wish,
    use it in the KF header; dont use the same Text Variable for Query Title.
    Now i tried this for you and it is working fine.
    Regards
    ReddY A

  • RRI with passing user enter values

    Hi Friends !
    Brief about my requirement for the RRI.
    I have a Main Query. When I click on Goto option, it shud display the variable screen and pass the user entered values in the Jump Query.
    In RSBBS, I tried with the "Assignment Detail" button, in which we have variable option, etc but via Assignment Details, its not working.
    Please provide some inputs.
    Thanks.
    Rekha

    It sounds like you are trying to make RRI do something that it is not designed to do. For RRI to work correctly, the sender query must contain all of the values to be passed to the receiver query. Therefore, no prompting for additional variable values occurs during the jump from the sender to the receiver.
    To quote the SAP Help on RRI :
    "Queries, transactions, reports and Web addresses can be jump targets. The parameterization of the target action is taken from the context of the cell that you have jumped from. You can set parameters for calling a BEx Query or a BEx Web Application using input variables which are filled from the selection conditions and the element definitions of the cells highlighted in the sender query."
    See <a href="http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/content.htm">SAP Library  -  Report-Report Interface</a> for all the details.
    Hope this helps...
    Bob

  • OAF PO Page Entry - User enter value in particular field  - Then want to check it should be unique othewise Message

    OAF PO Page Entry - User enter value in particular field  - Then want to check it should be unique othewise Message must be displayed so that user will select the non unique value in the entry filed. Please let me know will it be possible using personalization? Or I have to customize the controller extend it?

    Hahaha..
    Every tools have its own pros and cons.. There are much more things which you do in OAF (which is a web based solution) which you can't even imagine in Forms
    Cheers
    AJ

  • Ensuring user enter value in the fields before proceeding to another fields

    Hello,
    I am using Oracle APEX 4.1 in oracle 11g R2 database.
    Here is the case, I have build a custom form in which there are 20 fields. I want to ensure that end user enters value in sequence one by one.
    For example:-
    First Name should be entered before Last name or Date of birth.
    Please help guys...

    Use dynamic actions for that and disable the element Last Name if the element First Name is empty. Enable it if the First Name is entered.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.apress.com/9781430235125
    http://apex.oracle.com/pls/apex/f?p=31517:1
    http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
    -------------------------------------------------------------------

  • Can user entered value match slider?

    Hello:
    In LabView is there a way to have the user enter a numeric value in an edit box (Windows-speak) then update that value on a slider that is next to it?
    Thanks

    Right click on your slider and select Visible Items >> Digital Display. The user can then operate the slide or enter a number in the digital display. In earlier versions of LabView, select Show instead of Visible Items.

  • Want only the user entered values on the xml generated by clicking the button

    Hi All,
    Here goes the details of the problem.
    1. I have created two textfields(texttfield3 and textfield4) along with an email button in a fragment and binded to an XSD file.textfield3 and textfield4 are user entered fields.
    2. On the design page I have created two more fields texfield1 and textfield2 and binded to another XSD.These two fields are read only fields.
    3. On preview PDF screen whenever you click on the email button,you get a mail option with an xml file attached to it.
    4. whenever you open the xml file,you will get the values of all the four fields.Its given below
    <form1>
    <TextField1>value1</TextField1>
    <TextField2>value2</TextField2>
    <TextField3>value3</TextField3>
    <TextField4>value4</TextField4>
    </form1>
    5.But I want only user entered fields to be displayed on the xml page i.e
    <form1>
    <TextField3>value3</TextField3>
    <TextField4>value4</TextField4>
    </form1>
    6.How can I remove or avoid the read only fields not to be displayed on the xml page???
    Thanks in advance

    This forum is for our hosted services of LiveCycle.  I'd suggest that you repost this question this on the Designer (best choice) or Forms forum.

  • Set the user entered values to context node

    Hi Experts,
    I am using a context node for 'BuilHeaderSearch' BOL entity and have provided first name, lastname and email for the user to enter values to search the BP. My requirement here is to capture the values entered on the UI screen and set to context node which supposedly should be taken care by SET_* methods, which is not happening at the moment, consequently are not set to context node meaning that it doesn't go to SET_FIRSTNAME method.
    I know i could access the values using formfields but i don't think that's recommended.
    Please give me some clue.
    Many Thanks for sparing your valuable time,
    Santosh

    Hi Santosh,
    I think i got the problem now..
    Always create instance creates a entity if there is no entity exist in the collection of the context node, for eg lets say you are trying to create one model context node2 which is related to any existing parent context node1.. In this scenario if you check always create instance for the dependent context node2, it will create the blank entity and this you can varify in the  on_new_focus of the dependent context node2.(Create related entity code will be there which will create a blank entity if you have check always create instance).
    If you don't specify always create instance, framework will not create blank entity for your context node(Check the on_new_focus code no create_related_entity code will be there).
    In your requirement if you don't select "always create instance", then as per my understanding you will not be getting blank entity and set_property call should result into exception, which will not be the case when you have entity thru always create instance.
    Hope i am albe to clarify this..
    Cheers,
    Sumit Mittal

  • How to keep user enter value in textbox even if JSP page get refreshed.

    Hi Experts,
    In My JSP Page i have one text(customer Name) and number of checkboxes and radio buttons.
    My Problem is:
    if user enter some value in Text Box and after that user clicks on some radio button becouse of some action on radio button page get refresh and also the value enter by user in text box get vanish.
    I want keep text box value as it is even if page get refreshed becouse of some action.
    Is it any setting in Strust framework for this.
    I am using Struts Framework.
    Please let me know if need more information

    Sorry, I don't clearly understand the question and the horrible code (Java code doesn't belong in JSPs) doesn't make it more easy to understand.
    Best what I can guess is that you need to learn about passing request parameters/attributes in JSP and the possibilty of storing attributes in the session. And based on the code, also learn how to separate the data, business and presentation layers properly.

  • Format numeric field as user enters value

    I have a numeric field that I want to be formatted as 999-999999-999 so that when users enter 12-digit part numbers, the field automatically formats the value that they have entered. Is there a way to format their value as it is entered so that when they type the fourth number, a hyphen is placed between the third and fourth digit?
    Additionally, is there a way to allow a numeric field to have a default value with letters? I want to have a default value of "xxx-xxxxxx-xxx" but I don't want to allow the user to enter anything but numbers in the field. I tried using a text field, but I can't get it to reject letters and only accept numbers.

    Hi,
    You can define a display format pattern of "num{999-999999-999}" that will add the hyphens in once they leave the field, or maybe having three fields with the comb option set and hyphens between them would suit more?
    You can use the null display pattern to display any sort of text in a numeric, date, or whatever field.  Have a look at this sample, Adobe LiveCycle Designer Cookbooks by BR001: Adding Ghost Text to LiveCycle Designer form
    Regards
    Bruce

  • Need help to get the user entered value from a input field in Table in OA

    I have a table in my OA page.
    Here one column is there which should take in put from user.
    i.e an item quantity field text input is there which should take the updated value when the add to cart link which is next column in the table. On clicking of the link I am trying to get the updated value entered by user. for the respected row for which addto cart link get clicked.
    For that link I have defined some parameter through SPEL,( like this parameter name: item_quantity value : ${oa.MisibeItemSearchVO.ItemQuantity} ) which has fireaction. But when i am clicking the addto cart link I am not getting the current value entered by the user.
    Can any body guide me how to get that related value for which the add to cart link got clicked.
    for this when i am doing pageContext.getParameter("item_quantity"));
    I am not getting the value entered by user.
    please suggest me
    Thanks!
    Smarajeet

    The below is my Vo query for item quanity i am using a dummy query "(select null from dual) as ITEM_QUANTITY"
    in the below query and item type is number. and this is a messageTextINput in OA page and is maped to ItemQuantity vo attribute.
    SELECT idsi.section_item_id
    ,idsi.inventory_item_id
    ,(select concatenated_segments from mtl_system_items_kfv mstk
    where mstk.inventory_item_id = idsi.inventory_item_id
    and mstk.organization_id =idsi.organization_id) ITEM_NAME
    ,(select description from mtl_system_items_tl mtll
    where mtll.inventory_item_id = idsi.inventory_item_id
    and mtll.organization_id =idsi.organization_id
    and language = USERENV('LANG') ) ITEM_Description
    ,(SELECT CASE
    WHEN instr(msib.segment6,'NAMED USER') > 0 THEN 'NAMED_USER'
    WHEN instr(msib.segment6,'PROCESSOR')>0 THEN 'PROCESSOR'
    ELSE msib.segment6
    END
    FROM MTL_SYSTEM_ITEMS_B msib
    WHERE msib.INVENTORY_ITEM_ID = idsi.inventory_item_id
    AND msib.ORGANIZATION_ID = idsi.organization_id) LICENSE_TYPE
    ,(SELECT CASE
    WHEN instr(msib.segment6,'1 YR') > 0 THEN '1YR'
    WHEN instr(msib.segment6,'2 YR') > 0 THEN '2YR'
    WHEN instr(msib.segment6,'3 YR') > 0 THEN '3YR'
    WHEN instr(msib.segment6,'4 YR') > 0 THEN '4YR'
    WHEN instr(msib.segment6,'5 YR') > 0 THEN '5YR'
    WHEN instr(msib.DESCRIPTION,'Perpetual') > 0 THEN 'PERPETUAL'
    END TERM FROM MTL_SYSTEM_ITEMS_B msib
    WHERE msib.INVENTORY_ITEM_ID = idsi.inventory_item_id
    AND msib.ORGANIZATION_ID = idsi.organization_id) TERM
    ,(select qll.operand
    FROM qp_list_lines qll
    ,qp_pricing_attributes qpa
    WHERE qll.list_line_id = qpa.list_line_id
    AND qpa.product_attr_value = to_char(idsi.inventory_item_id)
    AND qll.list_header_id = 439381
    AND sysdate between NVL(qll.start_date_active, sysdate) and NVL(qll.end_date_active, sysdate+1)
    AND qpa.list_header_id = qll.list_header_id
    AND qpa.product_attribute = 'PRICING_ATTRIBUTE1'
    AND qpa.product_attribute_context = 'ITEM'
    AND NVL(qpa.pricing_attribute_context,'MIXED') = 'MIXED') ITEM_PRICE
    ,(select null from dual) as ITEM_QUANTITY
    ,(select currency_code from qp_list_headers_b where list_header_id =439381) currency_code
    ,(select segment1 from mtl_system_items_b msib
    where msib.inventory_item_id = idsi.inventory_item_id
    and msib.organization_id =idsi.organization_id) PART_NUMBER
    FROM ibe_dsp_section_items idsi
    ,ibe_dsp_msite_sct_items idmsi
    ,( select distinct child_section_id
    from IBE_DSP_MSITE_SCT_SECTS b
    connect by PRIOR child_section_id = parent_section_id
    start with parent_section_id =:1
    and mini_site_id =1
    UNION
    select distinct child_section_id
    from IBE_DSP_MSITE_SCT_SECTS b
    where child_section_id =:1
    and mini_site_id =1
    ) csi
    WHERE idsi.organization_id = 101
    AND idmsi.section_item_id = idsi.section_item_id
    AND idsi.section_id = csi.child_section_id
    AND idmsi.mini_site_id = 14409

  • How to run user enter value query and get result on Text item

    Hi ,
    I'm really newbie at JDeveloper and ADF , I want to run the query below , before with Forms i just adding :TEXT_NAME to get the entered users value , what I have to do now with ADF , really it's not clear question and I would appreciate any help with this ,
    select
    nvl(min(substr(a.starttime,1,8)),0) Service_Start_Time, nvl(sum(a.sessionvolume),0) Total_Traffic_KB
    FROM
    aaa_bill a
    where
    msid=:TEXT_ITEM
    and starttime >=(select max(fee) FROM aaa_bill
    where msid=:TEXT_ITEM and accountreason=5) ;

    You can use a ADF parameter form for this requirement.
    https://blogs.oracle.com/shay/entry/combining_multiple_queries_and

Maybe you are looking for