Reg : User Exit for IA05 - Operation Overview

Hi Team,
I have a requirement in IA05 in the operation overview we have a field called Std Text field(PLPOD-KTSCH) , Where the user gives the text field in the screen,
So based on the text key i need to populate work,duration, in the same screen as attached
How can i achieve this i mean exit/badi??
i am trying but i am not getting a suitable one.
Please help he to crack this.
Thanks!
Karthik.S

EXIT_SAPLCPDA_001 -Customer-Enhancements for Tasklists
EXIT_SAPLCPDA_002 -Customer-Enhancements for Tasklists
EXIT_SAPLCPDO_001 -PS: User fields
EXIT_SAPLCPDO_002 -PS: Customer specific fields in process
EXIT_SAPLCPDO_003 -PS: Customer specific fields in process
EXIT_SAPLCPDO_004 -Test units of measure for reference operation set

Similar Messages

User exit for changing operation scap in PP order

Hi,
I want to know user exits for changing operation scrap in PP production order. Please help
Regards
Shalini

I could found only one at the moment...
QEVA0002 - Calculation of share of scrap in inspection lot
check if it is helpful.....else u can go on
CMOD - Utilities - SAP Enhancements - (Remove Maximum No of fields) - Execute (F8)
You will get all user exits.
Now i need points.... :)...My score is not gettin increased... lolz
kapil

REG:USER EXIT FOR DATA SOURCE 0HR_LSO_1

Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .

Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
    LOOP i_t_data INTO my_struct
       my_struct-KOSTL           "Here you'll must have your Cost Center
       ...etc...etc...etc
    ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon

Reg:User Exit For Invoice

Hi All,
I have an requirement that when during creation of invoice i have to update some data's to ztables and during deletion of invoice i have to update some data's. Is it possible?
Is there any user exit for this scenario? Kindly give your idea's how to resolve this scenario.

hi,
these r the exits updated during invoice creation.
Transaction Code - MIRO                     Enter Invoice
Enhancement/ Business Add-in            Description
Enhancement
LMR1M001                                User exits in Logistics Invoice Verification
LMR1M002                                Account grouping for GR/IR account maintenance
LMR1M003                                Number assignment in Logistics Invoice Verification
LMR1M004                                Logistics Invoice Verification: item text for follow-on docs
LMR1M005                                Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006                                Logistics Invoice Verification: Process XML Invoice
MRMH0001                                Logistics Invoice Verification: ERS procedure
MRMH0002                                Logistics Invoice Verification: EDI inbound
MRMH0003                                Logistics Invoice Verification: Revaluation/RAP
MRMN0001                                Message output and creation: Logistics Invoice Verification
Business Add-in
INVOICE_UPDATE                          Business Add-In: Logistics Invoice Verification

User exit for order operation and internal assignment (SAPLCY18)

Dear all,
I am currently facing the problem below, which I have posted in PLM forum. However, I have been advised to ask in EAM forum, since probably my problem is more EAM-related.
The problem currently facing is related to PM order operations. The customer's requirement is to use operations and to include the personnel numbers involved. For this solution, our proposal is to have the operations and within internal operation data to use the tab requirement assignments in order to include the personnel numbers. Also at this level, the client expects to maintain the the 'hr' (work requirements) for each personnel. For example there are used 2 personnel ids with hr requirements of 2hrs and 3 hrs respectively. Let me mention that in the operation screen, the hr requirements are initially defined equal to 1 hr.
In the above case the message "The work of all the splits is greater than the work in the operation" apperas, since 1hr 5hrs. The question is if there is any way (user exit, badi) to update the work requirements in the operation with the sum of the internal assignment data.
Program SAPLCY18 may be help, although I have not found the work around.
More explanatory details to help:
The combination using Work-Number of capacities-Duration and the Calculation key is already used, however the requirement is to use specific personnel numbers. SAP, as far as I am aware, allows you to define personnel numbers within internal operations.
TAB Requirements assignements is available as long as in the operations main tab you have completed for the selected line the values Work-Number of capacities-Duration and Calculation key. Thus, in TAB Requirements assignments you can input the personnel numbers and the work of each one.
The question is if we can use the Requirements Assignments TAB, using the button internal in the operations tab in order to define the personnels involveld and according to the work (hrs) to update the respective field of the operation (otherwise let's say to update the duration field for each personnel id and automatically the operation respective duration field to be updated).
Your feedback is highly appreciated,
thank you in advance,
Bou.Lis

PeteA,
thank you for your response. I am actually looking for such a development solution (more-or-less I know that it is not possible using standard SAP customizing) but unfortunately I have not yet found such a user exit or BADI that could help solving the problem facing.
Do you have any idea of such a development tool to use?
Thansk and regards,
Bou.Lis

Reg User Exit for Infotype 8

Hi,
I have created two custom fields on infotype 8, i need populate on fied with base salaryBonus(from infotyp 14) and the other field should be the total of all line items on Infotype 8 ( Base salary shift differentials(permiums).
In order to do this, i searching for user exit , can anyone help me in doing this ..please
Thanks
Kisu

Hi,
I looks into the exit.It seems it is doesnt get tigger while going through the PA40.I dont know is it possible or not but I need to do while going through the actions. when the user in pa40 goes through some actions and reaches infotype 8 and enters and the values and press enters ,at this moment I need to find the Exit that gets tiggers and calculates the values and populates the custom fields on 0008.
I would like to know is it possible to do so..?
Thanks
Kisu

Reg. User Exit for TCode FCH5

Hi All,
Is there any user exit for Manual Check Entry Program (Tcode FCH5) that will not allow user
to make any modifications in existing check's.
Thks
Shailesh

Hi,
just mark your question as 'Answered' and give some comments.
Thanks.

User-exits for PO and MIGO

Hello Experts
i am having a requirement where in i will have to perform certain validations before posting PO and material document (MIGO). If these validations fail, PO or Material document should not be posted.
i managed to find certain BADI and user-exits (MB_CF001 and MB_DOCUMENT_BADI) typically for MIGO but when tested they use to get triggered once these doucment numbers are generated.
what i am looking at is cancel the process by giving the hard-error.
thanks in advance.
regards
rajeev

Hi,
<b>User exits for MIGO:</b>
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read From RESB and RKPF For Print List in MB26
MBCFC003 Maintenance of batch master data for goods movements
MBCFC004 Maintenance of batch specifications for goods movements
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
<b>User eits for PO:</b>
These are the User exit for CO01 ( Create PO)
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting
I am giving you the list of all user exits available for ME21N:
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
For your purpose you can probably try MM06E005. Or you can also try BADI ME_PROCESS_PO_CUST.
You can also check this BADI available for PO:
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
ME_BAPI_PR_CHANGE_01 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CHANGE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CREATE_01 BAdI: Enjoy BAPIs for Purchase Requisitions
ME_BAPI_PR_CREATE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Crea
ME_BSART_DET Change document type for automatically generated POs
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standa
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Cust
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Custom
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_RELEASE_CREATE BAdI: Release Creation for Sched. Agreemnts with Rel. Do
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_REQ_POSTED Purchase Requisition Posted
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Orde
SMOD_MRFLB001 Control Items for Contract Release Order
Transaction codes for BADI are:
SE18 - Business Add-ins(BADIs): Definition transaction
SE19 - Business Add-ins(BADIs): Implementation transaction
SE24 - Class Builder
Link for all user exits in SAP:
http://www.easymarketplace.de/userexit.php
Pls reward helpful points.
Regards,
Ameet

User Exit for CO07

Hi All,
I have come across one requirement:
While creating rework order in CO07, in the Component overview screen, there are two types of line items:
1. Component to be issued (261 movement)--- Qnty value is positive (like 150 meters)
2. Component to be received (531 movement)--- Qnty value is negative (like -75 meters)
There are so many line items in this screen. (some with positive values and some with negative)
I want the system to check,
sum of all positive values = sum of all negative values
If there is difference, then the system should give an Error message and not allow:
1. either the release of order
2. or Saving of order
I think, User Exit can be given for this effect.
Please let me know, the exit for the above problem.
Dinesh

CHECK THE USER-EXITS FOR CO07:
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operat
COZF0002            Change purchase req. for externally procured compone
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indica
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process ord
PPCO0010            Enhancement in make-to-order production - Unit of me
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch deter
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document l
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines
WITH LUCK,
PRITAM.

GL Account User Exit for all FI transactions

Hi Experts,
We have to create a Ztable and it stores GL bank account principal amount.
Ex: 130121 (SCB Bank) - Rs.10,00,000.00
In SAP , for the same GL account closing balances will available in FS10N of each month.
Ex: 130121 (SCB Bank) for Sep'09 - Rs.8,50,000.00
Now, the requirement is..
I want to put an User Exit for this Bank GL Account . It has to perform a check operation whenever this GL accounts comes for posting on any FI transactions, and
it'll check each time to the GL account principal balances(from Ztable) with the posting amounts and give a popup message regarding about the bank limits exceeded, remainaing amounts and then only they can able to post the transactions.
Ex: If they are posting in F-02 (general ledger posting) the amount showing in GL account which go for my user exit calculations everytime and the same will be for all other FI GL transactions.
Hope u understood else pls let me know by your replies.
Pls advise.
thanks & regards
sankar.

Hi..
In the tcode where u want to put the user exit, In the menu select System--> Status and double click on the program.
Then click on search and give the search term as "call-customer function".. and see if there are any available user exits..
Select one, and double click on the 3 number..if '003' ,double click on it,it will take u to the Fm..where u will find an include starting with Z.
Here u can write the code u want.
Regards,
Vishwa.

User-Exit for the Me22n

Hi,
I am Mohan. I faced on Problem with the User Exit. I write the user exit for the ME21n for PO Creation. While Creation of the PO the Purchase Requition is mandatory. it is working for the ME21n. But PO creation is another two ways is there. Those are ME22N (Purchase order---> Create) and ME23N
(Purchase order---> Create) for this case also my condition applicable but it is not working for this case. How to write the Code for this. by using Sy-ucomm also. but it is not working.
Please help me.
Regards,
Mohan

Following the user exit's related to ME22N transaction.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
Regards.

Badi & User Exit for ME21N & ME22N

Hi,
        My requirement is when a Purchase order is created using ME21n or when a line is added or changed using ME22n, the system should copy the vendors tax jurisdiction to the purchase order line items jurisdiction code. I tried badi (ME_PROCESS_PO_CUST) but could not suceed. Can any one tell me if any badi or user exit available for the same???
Thanks in Advance.

hi,
Enhancement/ Business Add-in            Description
Enhancement
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
M06B0003                                Number range and document number
Business Add-in
ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP                         Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV                            BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST                      Enhancements to Price Determination: Customer
ME_PO_PRICING                           Enhancements to Price Determination: Internal
ME_INFOREC_SEND                         Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO                              Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST                          Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK                    FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING                          Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE                      Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE                    Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001                           Control Items for Contract Release Order
MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP                    Determination of Delivery Address
ME_WRF_STD_DNG                          PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP                          Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF                    BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address
ME_REQ_POSTED                           Purchase Requisition Posted
ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE                       BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED                      Purchasing Document Posted
ME_PROCESS_REQ_CUST                     Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ                          Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C                    Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active
ME_BSART_DET                            Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC                     BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO                       BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES                      Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK                       BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV                    Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN                    Commitment for return item
ME_CIP_REF_CHAR                         Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO                         Copy PO data for use by Country version India
ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges
ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking
ME_CHECK_OA                             Check BAdI for Contracts
ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB                        Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER                     Customer-Specific Characteristics for Product Allocation
No.of Exits:         35
No.of BADis:         55
Arunima

User Exit for Purchase Order Release Strategy

Hi,
I am a little new to this, how do I search for a user exit for purchase order release strategy (TCode ME29N).
Thanks in advance.
Mick

Hi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED Purchasing Document Posted
SMOD_MRFLB001 Control Items for Contract Release Order
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
Reward points if useful
Rgds,
Naren

BADI or User Exit validation of operations tab and displaying an error mess

Hello,
Could you please let me know the BADI or User Exit validation of operations tab and displaying an error message in iw32
Thanks,
Suresh Mgl

Hi ..
I tried that user-exit...but i need to block the changes for purchase requisition which is in released stutus..
.i hope i need to do implicite enchancement spot.....could you please help me to do that..
Thanks,
Suresh Mgl

User exit for Exchange rate in PO (ME22n) of Delivery/invoice Tab

Hi SDN,
We are using 4.6c. I wanna make the FIELD "Exchange rate" in Purchase Order (Tx: ME22n) of Delivery/invoice Tab into display mode. So can any one tell the USER EXIT i have to use to make SCREEN-INPUT = 0 for this screen field, MEPO1226-WKURS.
Thanks in Advance.
Regards
Basha

Transaction Code - ME22N                    Change Purchase Order
Exit Name           Description
LMEDR001            Enhancements to print program
LMELA002            Adopt batch no. from shipping notification when posting a GR
LMELA010            Inbound shipping notification: Transfer item data from IDOC
LMEQR001            User exit for source determination
LMEXF001            Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001            Customer-Specific Source Determination in Retail
M06B0001            Role determination for purchase requisition release
M06B0002            Changes to comm. structure for purchase requisition release
M06B0003            Number range and document number
M06B0004            Number range and document number
M06B0005            Changes to comm. structure for overall release of requisn.
M06E0004            Changes to communication structure for release purch. doc.
M06E0005            Role determination for release of purchasing documents
ME590001            Grouping of requsitions for PO split in ME59
MEETA001            Define schedule line type (backlog, immed. req., preview)
MEFLD004            Determine earliest delivery date f. check w. GR (only PO)
MELAB001            Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1            Enhancement to Document Overview ME21N/ME51N
MEVME001            WE default quantity calc. and over/ underdelivery tolerance
MM06E001            User exits for EDI inbound and outbound purchasing documents
MM06E003            Number range and document number
MM06E004            Control import data screens in purchase order
MM06E005            Customer fields in purchasing document
MM06E007            Change document for requisitions upon conversion into PO
MM06E008            Monitoring of contr. target value in case of release orders
MM06E009            Relevant texts for "Texts exist" indicator
MM06E010            Field selection for vendor address
MMAL0001            ALE source list distribution: Outbound processing
MMAL0002            ALE source list distribution: Inbound processing
MMAL0003            ALE purcasing info record distribution: Outbound processing
MMAL0004            ALE purchasing info record distribution: Inbound processing
MMDA0001            Default delivery addresses
MMFAB001            User exit for generation of release order
MRFLB001            Control Items for Contract Release Order
AMPL0001            User subscreen for additional data on AMPL
No of Exits:         35
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

Reg : User Exit for IA05 - Operation Overview

Similar Messages

Maybe you are looking for