Reg:user-exits
hi to all ,
iam new to user-exits.i had seen some user-exits.
in which some are like FUNCTION EXIT_SAPMV45A_002,
FORM USEREXIT_FIELD_MODIFICATION.so what is the difference between them
are there any more exits.
with regards
satish
Hi,
1)
For the FUNCTION EXIT_SAPMV45A_002, you require a project in CMOD with the enhancement in it..Then the project should be activated in order to execute the code give in the FM..
For FM FUNCTION EXIT_SAPMV45A_002..You don't require an access key.
2) For user exit FORM USEREXIT_FIELD_MODIFICATION. You don't require a project in CMOD..You require an access key to modify the program.
Thanks,
Naren
Similar Messages
-
REG:USER EXIT FOR DATA SOURCE 0HR_LSO_1
Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
LOOP i_t_data INTO my_struct
my_struct-KOSTL "Here you'll must have your Cost Center
...etc...etc...etc
ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon -
Reg:User-Exit In Sales Order to Invoice
Hi All,
I have An requirement that to create automatic sales order and invoice in one go, i have used BAPI_SALESORDER_CREATEFROMDAT2 to create sales order and bdc invoice to create invoice its worked fine.
My problem is now i got an requirement as after creating sales order it should not create invoice as such because they will manually check whether the sales order is correct then only i should proceed to invoice also they need the option to create,change,delete sales order and same too invoice how can i acheive this scenario through user exits?
Since am new to user exit can any one tell me how to use user exits and what user exits need like this scenario?Hi Suresh,
For sales order following user exits can be used. These are available in include MV45AFZZ.
USEREXIT_DELETE_DOCUMENT : At the time of deletion of sales order
USEREXIT_SAVE_DOCUMENT : At the time of updations or creation of sales order.
Following are the user exits available in smod.
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Please check this exits which will help you for your requirement.
Thanks,
Naveen Kumar. -
hi,
i am writing this code in user exit MV45AFZZ for va32 and va02 transaction.it is working fine but the problem is whatever i select the first line item it is not responding corectly.ther then first line item the other line items are working properly and in va32 transaction when i select item overview tab then also the program is not working properly please help me out
LOOP AT XVBAP.
IF TCTRL_U_ERF_AUFTRAG-CURRENT_LINE = SY-TABIX
OR TCTRL_U_ERF_LIEFERPLAN-CURRENT_LINE = SY-TABIX.
SELECT VBELN POSNR ZEILE MATNR VTWEG WERKS DISPO
M1QTY M1QTY01 M1QTY02 M1QTY03 M1QTY04 MONYR KUNNR
INTO CORRESPONDING FIELDS OF TABLE IDEMAND
FROM ZSDDEM WHERE VBELN EQ VBAK-VBELN
AND POSNR EQ XVBAP-POSNR
AND MATNR EQ XVBAP-MATNR
AND KUNNR EQ KUAGV-KUNNR.
SORT IDEMAND BY VBELN POSNR ZEILE DESCENDING.
LOOP AT IDEMAND.
SELECT MAX( ZEILE ) INTO WA_ZEILE
FROM ZSDDEM WHERE MONYR EQ IDEMAND-MONYR
AND VBELN EQ IDEMAND-VBELN
AND POSNR EQ IDEMAND-POSNR.
AND KUNNR EQ IDEMAND-KUNNR
AND MATNR EQ IDEMAND-MATNR
IF SY-SUBRC = 0.
IF WA_ZEILE EQ IDEMAND-ZEILE.
TOTQ = TOTQ + IDEMAND-M1QTY.
ELSE.
DELETE IDEMAND INDEX SY-TABIX.
ENDIF.
ENDIF.
ENDLOOP.
IF TOTQ > 0.
MESSAGE E020(ZSD_AMP) WITH TOTQ.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.Hi,
Can you please check the below sap note?
Note 414421 - Creating or transferring simulat. version: CONVT_NO_NUMBER
Please also check
2. 0.410 PS-ST-WBS 449922 CJVB_PRPS_POST: ERR_UPDATE during update on table PRPS 27.02.2002
3. 0.400 PS-SIM 805384 CJV2; network structure graphic; create activity: NOT_FOUND 30.12.2004
4. 0.370 PS-SIM 379157 CJV4: SAPSQL_ARRAY_INSERT_DUPREC in SAPLV60F 24.03.2003
5. 0.340 SV-SMB-AIO-BP-IMC 612325 Coll.note: BP Industrial Machinery & Components (IM&C)V3.46C 25.08.2003
Thanks,
Ramakrishna -
Hi all,
Facing problem with user exit SUSR0001.
When we login through GUI control is flowing through the exit, but when we login
through RFC, control is not flowing through the exit.
Wt to do if we want need any validation while we login through RFC.
Suggestions pls.
Regard's
Jean.Jean wrote:
...when we login through RFC, control is not flowing through the exit
Hi,
usually in the RFC connections, Service user or Background user types are always specified...
These kind of users are no-dialog user and therefore the userexit you implemented is not executed.
In the link below you can find some information about RFC user management.
[http://help.sap.com/saphelp_nw04s/helpdata/en/ed/8d7b64ee75ef4cb42358427613fa95/content.htm]
Regards,
Andrea -
Hi Guys,
I have a requirement like i need to save delivery header texts in VL02N transaction while creation of return delivery order, can any one tell the which user exit or BADI..
Regards,
mahendar .Exit Name Description
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
BADI
DELIVERY_ADDR_SAP Address Change in Delivery Processing
DELIVERY_PUBLISH Announcement of delivery data during database update
Edited by: Phanindra Annaparthi on Mar 30, 2009 6:59 AM -
Reg user exit used for reading VB items
Dear all,
Please give me the details of user exit used when we run plant level MRP by MDBT, so that it will create
purchase requisitions only for consumables VB items, please explain how it works.
Thanks in advanceHi,
Can you explain what you mean by
create purchase requisitions only for consumables VB items
So for others you want to have planned orders?
Regards,
Vivek -
Reg:User Exit For Invoice
Hi All,
I have an requirement that when during creation of invoice i have to update some data's to ztables and during deletion of invoice i have to update some data's. Is it possible?
Is there any user exit for this scenario? Kindly give your idea's how to resolve this scenario.hi,
these r the exits updated during invoice creation.
Transaction Code - MIRO Enter Invoice
Enhancement/ Business Add-in Description
Enhancement
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
Business Add-in
INVOICE_UPDATE Business Add-In: Logistics Invoice Verification -
Hi Gurus,
In purchasing order what r the user exits available in sap?
regards
T.ReddySee the below user exits available for purchase order :
LMEKO001 Extend communications structure KOMK for pricing
LMEKO002 Extend communications structure KOMP for pricing
MM06E011 Activate PReq Block
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Individual customer source determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MRFLB001 Control Items for Contract Release Order
Thanks
Seshu -
Hi,
I have created two custom fields on infotype 8, i need populate on fied with base salaryBonus(from infotyp 14) and the other field should be the total of all line items on Infotype 8 ( Base salary shift differentials(permiums).
In order to do this, i searching for user exit , can anyone help me in doing this ..please
Thanks
KisuHi,
I looks into the exit.It seems it is doesnt get tigger while going through the PA40.I dont know is it possible or not but I need to do while going through the actions. when the user in pa40 goes through some actions and reaches infotype 8 and enters and the values and press enters ,at this moment I need to find the Exit that gets tiggers and calculates the values and populates the custom fields on 0008.
I would like to know is it possible to do so..?
Thanks
Kisu -
Reg: User exits used in pa40 and pb10
Hi Experts,
I need to find user exit in pa40 and pb10 main program ,where i can capture fields like RCINS (vendor ID) and offid (advertisement ) and need to update applicant details into my z table.Try the one in with +: Both of Tcodes have Same user Exits
Exit Name Description
+ HRPBAS01 User Exit for HR Master Data*
HRPC0001 HR: PC download authorization
HRRPAI01 User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
PARA0001 Enhancement for Determining the Number of Periods
PARA0002 Enhancement for Calculating Annual Salary; IT0008,14,15
+ PBAS0001 PA: Pers.Admin./Recruitment: Default values and checks*
PBAS0002 PA: Enhancements for Personnel Administration - Menu
PBASRP01 PA: User exit distributed reporting
PBAS0004 Spanish Data Privacy Law: User Exit for Recording
Regards
Shital -
Reg:User-Exit In Sales Order
Hi All,
In the Sales Order there is a field called Order Reason(Which will come for Sample Order) for that field i want just want to check the authorization, like for this particular user he can use only three order reason from that 12 order reason in Dropdown list box , i have created the authorization object and class, could you please say in which user-exit can i use the Authority-check Statement syntax so that it works well.You will get a lott of user exit in MV45AFZZ.
among them use the one that is called at the time of save.
Use:
1. FORM USEREXIT_SAVE_DOCUMENT ( line no 289 of MV45AFZZ)
or
2. FORM USEREXIT_SAVE_DOCUMENT_PREPARE ( line no 369 of MV45AFZZ)
These are user exit ( subroutine), so you required access key for those. -
Reg user exits exit_saplogdl_005 and exit_saplogsl_007 for va01 tcode
Hi All,
I have a requirement to add new fields to additional dataB fields for the transactions va01,va02 and all that we can do with screens 4462 of main screen 8459 and we can write the code in the user exit userexit_move_field_to_vbap in program MV45AFZZ. But in our requirement they also mentioned we have to write the code in the fun mod exits "exit_saplogdl_005" and "exit_saplogsl_007"
These exits I am able to find only in my version ECC6.O not in 4.7 and all and also I don't find any parameters for this function module exits. Can any body throw some idea how I can use of this fun mod exits.
Thanks&Regards
MaheshHi All,
I have a requirement to add new fields to additional dataB fields for the transactions va01,va02 and all that we can do with screens 4462 of main screen 8459 and we can write the code in the user exit userexit_move_field_to_vbap in program MV45AFZZ. But in our requirement they also mentioned we have to write the code in the fun mod exits "exit_saplogdl_005" and "exit_saplogsl_007"
These exits I am able to find only in my version ECC6.O not in 4.7 and all and also I don't find any parameters for this function module exits. Can any body throw some idea how I can use of this fun mod exits.
Thanks&Regards
Mahesh -
Reg : User Exit for IA05 - Operation Overview
Hi Team,
I have a requirement in IA05 in the operation overview we have a field called Std Text field(PLPOD-KTSCH) , Where the user gives the text field in the screen,
So based on the text key i need to populate work,duration, in the same screen as attached
How can i achieve this i mean exit/badi??
i am trying but i am not getting a suitable one.
Please help he to crack this.
Thanks!
Karthik.SEXIT_SAPLCPDA_001 -Customer-Enhancements for Tasklists
EXIT_SAPLCPDA_002 -Customer-Enhancements for Tasklists
EXIT_SAPLCPDO_001 -PS: User fields
EXIT_SAPLCPDO_002 -PS: Customer specific fields in process
EXIT_SAPLCPDO_003 -PS: Customer specific fields in process
EXIT_SAPLCPDO_004 -Test units of measure for reference operation set -
Hello,
I want to add a field on to standard PO screen ME21n..i have to add vendor reconcillation account field on to header area of PO on to Organization data tab..can any one suggest me how to proceed..
Regards,
VamshiHi
try :
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
With Regards
Sandeep
Maybe you are looking for
-
Sleep Display Option in 10.4?
Hello Discussions, Does anyone know if the 'Sleep Display' option available in Exposé in OSX Leopard is available for Tiger? Perhaps a script or third-party piece of software? Thanks for any advice. Cheers, R.
-
Hi, I'm developing a Java Aplication Desktop, and I need have a predictive text on TextField of Jswing. How do this?? Thanks... and excuse me , i talk less English
-
i am start a photo biz i like to shoot a lot of nature and scenic stuff would like to know whats a good starter camera. have considered the kodak easy share z980. also would like to know about a starter slr
-
Installing SAP IDES 4.6c with Oracle DB under Windows 2000 server
Hi everyone. As many people, i would like to learn MM module and the only way is installing SAP IDES on my computer. I have a SAP IDES 4.6 with oracle DB and i want to install under w2k server. Is there any weblog explaining how to install it? If the
-
Guidance on Storing Environmental Variables
Let me try to explain the problem I'm having, and a few different solutions I've explored. I'm using Tomcat. I have a directory structure like: /opt/apache-tomcat/webapps/beta.mysite.com/WEB-INF/classes/Functions/ The Functions package contains diffe