Reg:warehouse
hi,
when i am try to move stock to the ware house, in goods receipt it throws .Error during search for WM movement type (921 B )
Message no. L9005
i am using the movement type 101.i miss any configuration in it .if so tell me in detail.my reqirement is i have to move goods to interim bin as purchase order , once i confirm TO it has moved to the specifed bin for storage type. i thing i miss somewhere in movement type help me.
appreciate your help always,
muthuraman.d
hi muthu,
you making goods receipt against a normal purchase order or you are taking against stock transport order.if you are taking GR
Against the normal po then check your WM-MM movemnt type config as mentioned SPRO->Logistics execution>WM->Interfaces->Mov.types--->assign wm mov type to IM mov type
Check what mvt type has been against 101.and also check in movement types for warehouse for 101 mvt normallly for gr the interim bin will be 902.
Regards,
velu
Similar Messages
-
Reg: warehouse Management
hello Gurus,
can u anybody send me the good material for WMS. like siemens etc.
Pls, it will be great helpful for me,..
Findmy mail id: [email protected]
thanks in adv.
Regards,
MuralidharanHi Altaf,
Could you send me too please
my email address is : [email protected]
Thanks,
Melissa -
REG: Creation of Warehouse product using transaction /SCWM/MAT1
Hi,
My requirement is to create Warehouse Products using Transaction /SCWM/MAT1 , I am using BAPI_PRDSRVAPS_SAVEMULTI2 , but I cound't able to process this because I did find Warehouse number in this BAPI, Am I using correct BAPI, if that is the case let me know the BAPI for warehouse product data,
Thanks
RKHi,
There is no specific list, it depends completely on the condition types that have been configured in your system.
The answer you were given was a good one and gave you as much detail as you could expect.
If you are having a particular problem or issue then let us know and we will do all that we can to help.
The easiest way to find out the "list" is to simply click on the "possible entries" tab at the right of the field. !!!!!!!!!!!
Steve B -
Reg : Material warehouse management view 1 & 2
Hello All,
Using a Z-programI am extending the warehouse managemnt view for a single Plant, the view gets created successfully. But some how an Inactive version of Warehouse management view gets created for other plant also. How we can prevent the creation of this inactive view creation.
Please let me know your suggestion.
Regards,
Ravi Kasale.from Note 545626 - FAQ: Data transfer problems:
Read the explanations in OSS Note 67616.
Bear in mind that, in the structure/table HEADDATA, the for BAPI methods StandardMaterial.SaveData (BAPI_MATERIAL_SAVEDATA) and StandardMaterial.SaveReplica (BAPI_MATERIAL_SAVEREPLICA) of the business object BUS1001006, you can select the required views and these correspond to the respective maintenance status.
In the segment E1MARAM of the MATMAS IDocs, you can assign the overall maintenance status in the field VPSTA.
Edited by: Jürgen L. on Jun 6, 2011 4:01 PM -
REG: SAP Knowledge warehouse
Hi All,
Can u anybody have SAP Knowledge warehouse? if, please contact me thro mail ID : [email protected]
Thanks,
- SelHi,
Check your mail. i have sent u a document.
Sry it has been returned not delivered coz the size is more. Anyway will try to send frm outside.
Regards,
Senthil
Message was edited by: senthil kumar -
Reg: Table where can i get the details in warehouse Management
Hi All,
Would you please help to list down all materials in plant and warehouse 050 with below material mater data?
1. Warehouse
2. Plant
3. Material
4. Material description
5. Base Unit of Measure
6. WM unit
7. Unit of measure
8. Proposed UoM frm mat
9. Order Unit
Please let me know wher can i get the above details in taple with plant.
Thanks & Regards
SivaHi,
Check info as below:
1. Warehouse - Table MLGN
2. Plant - Table MARC
3. Material - - Table MARA
4. Material description - - Table MAKT
5. Base Unit of Measure - - Table MARA
6. WM unit - - Table MLGN
7. Unit of measure - Table MLGN
8. Proposed UoM frm mat - -???
9. Order Unit - table MARC
Hope this helps
Dheeraj -
Custom Bonded Warehouse & Import Customs Duties inventorised
Hi all,
i have created a bonded ware house plant and transferring the material from the bonded warehouse to other plant by the following way.
ME21N - Create STO (in Main Plant, Supplying Plant as Bonded Warehouse Plant)
Here in this PO, maintain all the Import Duties;
JCDB IN:Basic Custom Duty
JCV1 IN : CVD
JECV IN : Ed Cess on CVD
J1CV IN : H&SECess on CVD
JEDB IN : Ed Cess on BCD
JSDB IN : H&SECess on BCD
JADC Addnl Duty of Custom.
Miro done first for the paying the customs duty to the govt.
351 movement carried out.
in the accounting documnet, all the excise duties are loaded on the material. my case is i want only the customs duty to be loaded on the material not the cvd, ecess on cvd.
How to proceed further. kindly help me out
Reg
Vikas
Edited by: Vikas Mayekar on Apr 24, 2009 12:07 PMHi Vikas,
I am facing the same problem of CVD amounts are uploading on to the material value in transfer posting from bonded warehouse plant.
can you explain the process of the CVD amounts are not to be uploaded on to the material value in transfer posting from bonded warehouse plant.
Regards,
Venkat -
Excise capture in S TO of Custom bonded warehouse
hi all,
i have created a bonded ware house plant and transferring the material from the bonded warehouse to other plant by the following way.
ME21N - Create STO (in Main Plant, Supplying Plant as Bonded Warehouse Plant)
Here in this PO, maintain all the Import Duties;
JCDB IN:Basic Custom Duty
JCV1 IN : CVD
JECV IN : Ed Cess on CVD
J1CV IN : H&SECess on CVD
JEDB IN : Ed Cess on BCD
JSDB IN : H&SECess on BCD
JADC Addnl Duty of Custom.
Miro done first for the paying the customs duty to the govt.
351 movement carried out.
in the accounting documnet, all the excise duties are loaded on the material. my case is i want only the customs duty to be loaded on the material not the cvd, ecess on cvd.
How to proceed further. kindly help me out
Reg
RocHi Rakesh,
could you please explain , how you solved this problem ? I am facing exactly same problem. I have posted the problem on forum also.
Thanks in Advance
Regards,
Vikas -
One warehouse number, two number ranges?
Hi all,
I have a scenario where an external system creates some of the transfer orders in a warehouse, while others are created through normal WM processes.
I would like to be able to give the external system a specific number range to use, separate from the standard range.
Standard system only allows assignment of one number range to a warehouse number for TO.
The external system will communicate with ECC through IDOCs.
Does anyone know if it is possible to set this up? Looking a enhancing the TO creation when triggered by the IDOC is a possiblility I guess?
Regards,
Mark.Hi Mark,
Can you please check if you can manipulate the value of screen field V_T340DA-NUKTA thru' the function module used for the inbound idoc posting TO? You can maintain 02 number range as external with given range in SPRO. On execution of function module for Idoc above screen field value change to 02..the other number can be used.
Hope this will help.
Reg,
Sudhir -
hi
in case of import under custom bonded ware house plant
i do
1) PO in bondedwarehoue plant
2)GR in same plant
then after STPO i m transfering to original plant by paying duty.
But before placing order i dont know whether material will go in custom bonded ware house or directly come to my plant
it is not fessible to raise all import po in bonded warehouse plant due to less volume of such bonded warehouse tranction.
so is it possible to raise import po in original plant instead of bondedwarehouse plant but i should be able to track custom bonded ware bouse qty.
please.....
Reg
Rochello pankaj..
thanks for ur prompt reply
after doing this ist it possible that i will pay to foriegn vendor from original plant instead of warehouse plant as there should not be any financial entry from warehouse plant bcoz my client dosnt want bondedwarehouse to come in balance sheet.
Thanks in advance
roc -
Use of RF scanner for Optimization of Warehouse operations
Dear All,
I am going through the SAP forum, i saw few of you worked on some scenarios related to RF scanner.
I am also working on a business requirement to optmise the Warehouse operation, like in existing business GR / TO confirmation/ GI/ JIT call creation happen everything in SAP standard transaction / as i am working with automotive OEM, we have a functionality called BORGR for IBD/ Shipment / TO/TO confirmation/ and GR.
Our warehouse operation in HU manged.
Could you pl help me on configuration or usages of RF scanner for the GR/ GI/ JIT call creation ( LM01)
It will be great help if any document for support will get from your side.
Appreciate your earnest response
Thanks in advance
OmHi Om,
Check below thread
Handling unit configuration
More info in the below link
http://help.sap.com/bp_bblibrary/600/Documentation/G74_BB_ConfigGuide_EN_US.doc
Hope this will help..
Reg,
Sudhir -
Transfer of Stock from Warehouse to Warehouse
Hi ,
I have the following query.
Warehouse 1 is assigned to Plant 100 and Storage location 10.
But now the client wants to assign Warehouse 2 to Plant 100 and Storage location 10.
As per the requirement I changed the assignment. But now I have come to know that there is stock for certain materials in Warehouse 1. Since the assignment is already done, how can I move the stock from Warehouse 1 to Warehouse 2
Appreciate the help.
Regards
Mohan"But lets say I assign Warehouse 1 back to Plant 100 and storage location 20"
I presume by storage location 20 you mean 10
Yes I believe this will work.
1) Assign back W/H1 to 100 / 10
2) Check if there is any stock inconsistency. Whatever stock available in W/H-1 for pl / st locn 100 / 10 should match stock at IM level.
3) Create new st locn 20 (in your last message it is 30) under pl 100 and assign W/H-1 to 100 / 20
4) Transfer all stk in W/H-1 from 100 / 10 to 100 / 20. At the end of activity there should be no stk at st locn 10 and no stk in W/H-1 for pl / st locn 100 / 10. All stock in W/H-1 will be for 100 / 20.
5) Now remove assignment of W/H-1 from 100 / 10 and assign W/H-2 to it.
6) Transfer all stk from 100 / 20 to 100 / 10 back.
At the end of activity stock will be in W/H-2 with pl / st locn 100 / 10.
Reg,
Sudhir -
Which SAP module for static location control in warehouse management ?
Hello,
can someone please help me answering this question:
One of our warehouses is managed with location. One item can be stocked in more than one location, but the user decides which location he puts the item in. We do not need dynamic location control.
Do you think we can manage this with the modules we plan to implement (MM, SD, PP, FI, CO), or do we absolutely need a new module (WM) ?
Thanks in advance for yourr help.
RegisDear Regis,
If using the Warehouse Management System, a storage location can be further defined down to the bin level.
Although it is possible for you to manage warehouse inventories using the Inventory Management (IM) application component, the primary difference between managing stock in WM and in IM is that in IM, the system can only display the total stock of a material for a storage location. If a warehouse is small and easily manageable, then the use of IM may be sufficient to fulfill your needs.
WM, on the other hand, offers the capability to manage stock quantities in each individual storage bin in highly complex storage facilities. This means that, with WM, you can optimize the use of all storage bins, mix pallets belonging to several owners in randomly slotted warehouses and know exactly where a particular material is located in the warehousing complex at all times.
The bottom line is it all depends on various facrors including budget, complexity etc.
Regards,
Naveen. -
Knowledge warehouse is not working
hi,
with the link
http://SERVER:50000/SAPIKS2
Of course i have put in the right value for our server.
i only receive a EMPTY page.
Can anybody tell me what is wrong here ? I want to use the 'knowledge warehouse'.
best reg, MartinThe config url Knowledge Warehouse on http is :
http://SERVER:50000/SAPIKS2/chgApplConfigParams.sap
If you have any problems, post me.
rewarding for help answer. -
Moving to new warehouse building
HI all
My client has planned to move the warehouse to new building,i wanted to make sure the things which has to be taken care of.
wanted to create a new Sloc WM managed and a sloc IM,if i copy the old warehouse whether the customizing exist in the old warehouse will everything get copied?how can i handle the material master?while moving the stock form the old building to new building ,can i do a 311 move as the stock is moved from old warehouse to new,Sloc to Sloc transfer?plz clarify me and let me know whether i hv to take care of any other things which iam missing.
Thank you for your time.
Thanks in advance.Iam creating a new Storage location (NWSL) (WM managed)and warehouse (NEW )by copying the Sloc (OLDS) and warehouse(OLD ) which already exists for the plant 1111(in same plant),i have a lot of materials which has to be copied for the newly created plant (wm managed),my concern is whether all the material master views will get copied by doing MM17 or is there anything i need to take care for shipping points,receiving,creating deliveries sort of things.Could anybody plz tell me what are the tables that has to be copied while doing MM17,so that i have newly created warehouse with sloc YYYY behaves in the same way as the old one.
I havent used MM17 before so could you plz send me any docs r link or explain me in detail reg the MM17.
Thanks in advance.
Maybe you are looking for
-
Hi I have one Zreport which gives the result in ALV form. After getting the result(1 row with 33 columns) when I tried to export the ALV results to spread sheet using the option : List-> Export-> Spread Sheet OR by click on Excel icon in the display
-
Sharing an address book over a local network - is .Mac required?
We have a smal Mac ethernet network of 4 or five macs all running OSX 10.3 or above and all with Administrator access. Each mac is used by one member of staff only. One member of staff maintains our client/supplier contacts database as an Excel works
-
Adding fields in MC02M_0ITM giving dump IMPORT_ALIGNMENT_MISMATCH
Hi Experts, I need to add some Z custom fields in BW datasource 2LIS_02_ITM which we are doingby appending in structure MC02M_0ITM. I am activating structure and removing hide field check box also in RSA6 transaction. But when we are executing transa
-
Can anybody help with this error message
I work with CS5.6 on RAW pictures shot with a Canon EOS 5 Mk II and have problems saving. Mycomputer is 32-bit with 4 Gb RAM, Windows 7. Die Error Message in Adobe CS5.6 ist: „ could not complete the SAVE AS command because there is not enough memor
-
I keep getting this error message and cannot back up my Mac Book Air to Time Machine; "Air.sparsebundle" is already in use" how do I correct this?