Reg: Ways to track the modifications made in the variant

I have a created a variant for PR which has been changed due to which I couldn't create a po automatically.
Now my doubt is is there a way to track which user has changed/modified the variant.
Juz to find the culprit
Thanks & Regards
VKK

Hi
Go to Table VARID and give your program name and variant name in the selection screen. The fields AENAME, AEDATE and AETIME will give you the details of the user and time when there was a last change in the variant.
Regards
VIrender singh

Similar Messages

  • Is there a way to track the delivered qty at the schedule line level in R3

    Hello Gurus,
    Is there a way to track the delivered qty at the schedule line level in R3.  I spoke to al ot of functional guys on this and the answer is NO. If NO,then, how does the 2LIS_11_V_SSL extractor extract the delivered qty at schedule line level. Help is really appreciated.
    Thanks
    Simmi

    Hi Simmi,
    I have used this extractor for the purpose you describe at more than one customer without problem. My understanding is that it links the order schedule line with the delivery, but I haven't tried to work out the mechanism.
    Regards,
    Ken

  • My new iphone was stolen today. I'm trying to track it via icloud but it shows the average ratio that the phone is disconnected. Are there any other way to track the phone. Thanks for your help.

    my new iphone was stolen today. I'm trying to track it via icloud but it shows the average ratio that the phone is disconnected. Are there any other way to track the phone. Thanks for your help.

    If the phone is turned off, doesn't have an internet connection, or has been restored preventing "Find my iPhone" from being able to work, there is no other way to track it.

  • Is there any way to track the use of an IMEI on a stolen iPhone 5?

    I've had an iPhone 5 stolen.
    Battery was dead so 'Find My iPhone' was no use -so far.
    Problem is... my SIM-PIN is disabled so I need to deactivate the SIM in order to prevent fraudulent use of my contract account (if someone transferred the nano-SIM into another handset) -and to get services back.
    Once I do this, the phone will have zero network coverage and shall be unable to receive "Find My iPhone" messages or transmit its position.
    So, the difficulty here is that, in order to protect use of my phone account, I have to give up on any possibility of recovering my phone.
    Also, the handset's PIN is enabled so a well-intentioned person who might find my phone would be unable to connect the phone, even to their WiFi, to provide it with coverage in order to receive my 'Find My iPhone' message.
    I'm trying to figure out how I might use the IMEI to be made aware of the phone coming back up on a network somewhere at some future date? If so, I could contact the relevant network and track the calls and recover the phone.
    I assume that as there is a handset PIN in use on the phone -some jailbreaking or similar shall be required to hack the phone and reset it?
    If someone is going to that effort then clearly, the phone has been stolen rather than 'found'.
    Any ideas?
    Regards,
    EUPREMIER

    Apple, as I'm sure you know, now manage official phone 'unlocks' directly rather than the Newtork doing so.
    When a GSM Network Provider buys a consignment of iPhone's they are locked to that carrier and may only be officially unlocked if said carrier requests it. If so, it is Apple who do this, via iTunes.
    I am therefore inclined to think that part of the any generic iTunes syncing process involves the transmission of key hardware data, including IMEI, to Apple whenever the handset is synced.
    If this is the case and, as each iTunes account is linked to a credit card, were Apple to maintain a database of genuinely stolen phones (ones reported to Police) they could advise said Police force when a stolen phone stuck its metaphorical head over the parapets once again? They would be able to identify the name & address of the new user.
    I have spoken to the Police here in Ireland today and they regularly engage with Apple on such matters.
    This may not be tracking as we know it Jim, (not using GSM Triangulation or GPS) but it's arguably even more targetted and leaves an indelible fingerprint of guilt on the thief.
    The laws here are simple in this regard, if you are in possession of stolen property, knowlingly or otherwise, you forfeit the goods once the Police show up. Whether you get prosecuted depends on whether you stole the goods or were duped into purchasing them.

  • Need a way to track the Demand/Supply in MRP

    Hi
    We have this scenario: Business is using a third party system to book the Orders which are practically the Forecast in Oracle. These orders are linked to a unique tracking number in the third party system (similar to Project /Task in Oracle).
    We are pulling the demand details into custom table in Oracle and planning to populate in Forecast tables using standard interface tables. Now the challenge is where to populate the tracking number in the Forecast table.
    We want this tracking number to carry over to the subsequent Planned orders as well.Since we do not have Oracle Project Manufacturing, we are thinking about other options.
    If anybody faced this situation earlier,please let us know your thoughts.
    Thanks in advance.
    Regards
    Prabakaran

    Jose,
    You'd have to update a table every time a user goes to a page. There's no way to track what the user "doesn't" do, however, or when the user exits, unless they use some particular link to exit. What if the user simply closes the browser and goes home?
    Scott

  • Is there any way to track text edits made in pdf file

    when making text edits to a pdf document, i am interested to know ... is there any way to track these within acrobat.
    i.e. text added/deleted to the pdf and not commented.
    i am using acrobat version 11.0.09.
    many thanks in advance.

    Not really.  The best you can do is use the Compare Documents function to
    identify such changes after the fact.

  • Is there a way to track the status of a process?

    Hi all,
    after user completes a process, user later might want to know what stage this process is in, user want to keep track.
    is there a way to do so? 
    i tried the UWL's "Completed tasks" it only shows me some very basic infos. i want to know what stage the process is in right now. how?
    thanks in advance.

    Hi,
      There are NWA Applications to monitor the status of process and tasks.
    Please go to NWA HomePage -> Operation MAnagement -> Manage Process  (there is also a link Manage Tasks).
    Here, you could have the status of the process, with its details, context data, business logs etc.
    Hope this helps !
    Karthik

  • Is there a way to track the Facebook app search history?

    I've been trying to see if I can follow my son's search results in the Facebook app.  There are questionable sites I prefer him not to search out.  I can shut off the app and just have him use safari and track his movements that way, but would rather just use the app.
    Any ideas?
    Thanks.

    Just click on:
    https://me.com/find/
    and enter your ID.  When it locates your iPod, it will allow you to turn on an alarm signal on your iPod which should let you find it.

  • Is there a way to track the time within the clip (not sequence) that you're in?

    Let me try to explain this as best I can and make sense.
    I watched a video clip and I liked everything from, let's say the :30 mark to the minute mark. So, I import it into Premiere.
    However, when I put it at the end of the next clip, it shows the time for the whole sequence. Now, I know that I can do the math, but is there a way to show where the 30 second mark (in this example) is by avoiding doing the calculation? It's do-able, but seems a little tedious.
    Would like to "reset the clock" so to speak when working on individual clips within the timeline.

    Choose the edit points in the Source Monitor before inserting to the Sequence.
    You can see the duration of the In and Outs in the Monitor .

  • Is there a way to track the origin of an iMessage?

    I've been receiving messages from an email address through iMessage and was wondering if there's any way to locate where the messages are coming from? Not to a specific degree.. finding out the country the messages are coming from would be useful.

    awilkerson22 wrote:
    I've been receiving messages from an email address through iMessage and was wondering if there's any way to locate where the messages are coming from? Not to a specific degree.. finding out the country the messages are coming from would be useful.
    No. Email address don't have to be tied to any particular geographic location. If you are being threatened, contact law enforcement. They would be able to contact the email service provider and, possibly, with the appropriate court orders, get that information.

  • Is there a way of tracking the iPhone 5

    How do you track a stolen iPhone 5

    If you turned on Find My iPhone on your iPhone 5 then you can log into iCloud and go into Find My iPhone.

  • Is there any way to track a stolen laptop using the mac address, or by triangulating the wifi, or even by checking to see if the macbooks serial number has been registered online anywhere?

    A little info on my question,
    I had it stoeln on June 22nd 2013. I had recently bought it so had not installed any software on it nor did I have registered with icloud. I had contacted police, registered it stolen with Apple (but then just discovered this week that apple do not have a database for stolen products, which makes no sense at all).
    I have contacted all the major pawn shops and computer stores in town etc etc. I have recently discovered that each laptop has a unique MAC address whcih begs the question, is that traceable somehow? I have been made aware that the router strips the mac address before it connects it to the internet but does the isp log the laptops MAC address? If i contacted all the major isp in my country would they have the ability to search for the mac address of my latop and then link that with an ip address?
    Any help would be great please!

    karlgporter wrote:
    Yeah but I registered it stolen with Apple first thing, then called local police etc. Apple told me on the phone that the serial has been logged as stolen, which I assumed would limit the computers use online.
    Every machine has a unique serial number what I was getting at is there must be some way to track the serial number and for example if the theif logged onto facebook using a stolen machine, if there were a register of stolen equipment then red flags would pop up, you know what I mean?
    Well, I hadn't heard of that before. If it's true, then what you say should also be true but the Mac would have to publish its hardware serial number over the Internet and I haven't heard of that either. The only Apple tech that is supposed to constantly track you is iCloud.
    You said you assumed the database would limit use online but if that's only an assumption, you need to ask Apple what exactly the stolen database does. It is possible that the serial number might only get flagged if it comes into an Apple Store for service, if it ever does. You need to clarify this with Apple.

  • My daughter is missing and has her iPhone 4S with her. When I log into iCloud it says online, location services off. Does that mean there is no way for me to track the phone?

    My daughter has been missing for a week and has a serious medical condition. She has an iPhone 4S and when I log into find my iPhone it says online , location services off. Does that mean there is no way to track the phone?  Please  I'm willing to try anything to get my baby home. Thanks.

    Without location services, there's no way the device can be tracked.  It's location services that provide the device's location to any apps that need that info, including the Find My iPhone service.  Sorry.

  • Is there any way to track what reports are actively running on BOE?

    Good Afternoon.
    I am looking for a way to track the names of what reports are currently being run on Business Objects. We are on Business Objects Enterprise XI R2 SP3 and from what Iu2019m aware, the servers can show the administrators how many connections and how many jobs are running, and the auditing command can track when a report has completed/failed (from what I understand), but nothing really tells us what reports are actively being run.
    The purpose of this is to measure impact for an emergency restart of the server, track down reports that are taking up system resources, and debugging issues involved with the SDK.
    Background: We have several reports hosted on Business Objects, both Crystal Reports and Web Intelligence.  These reports go to different universes and databases and use several different accounts depending on the project (no central generic accounts to the databases).  Sometimes when people are running several large reports (some being upwards of 1 million rows) the users will open one, leave it to run and go to open several others, killing our session limit and resources on the server. In addition, there have been times in development that restarts have been required but there was no way to tell what reports were running, just the number of them, and in several different spots (RAS, Page server, etc.).
    Wish list (If my first priority is answered, Iu2019m also looking for the following):
    - One to one associations of what reports are being run by what users.
    - A centralized location to see what reports are being run by users opening them and what reports are being run by users scheduling them.
    - The ability to u201Ckillu201D a report that is taking too long to run by a user.
    - Possibly an interactive dashboard showing the number of active reports verses the serveru2019s limit, what reports are set in queue, etc.
    - The u201Cstageu201D a report is running in, so if someone is running a report but its stuck at the prompt for a variable stage, querying data from the database, getting data back from the database, producing and processing the data to the screen, etc.
    If Iu2019ve missed something in the Business Objects tools or if someone knows of a way to extract this type of data from the Business Objects server (3rd party tool or custom fix) I would appreciate the assistance. Thank you for your time.

    Brian,
    I don't know if you tried using the Query Builder.
    The query below (or some modification of it) may be of some help.
    SELECT
    SI_SCHEDULEINFO, SI_NAME
    FROM
    CI_INFOOBJECTS
    WHERE
    SI_SCHEDULE_STATUS = 1
    The SI_SCHEDULEINFO.SI_SUBMITTER property in the query result will give you the BOUSER value of the user that submitted the job.
    SI_SCHEDULE_STATUS takes the following values:
    0     The job is currently being processed by the job server.
    1     The job completed successfully.
    3     The job failed. Check error message.
    8     The job is paused.
    9     The job has not started because dependencies are not satisfied (e.g. Events)
    Best,
    Srinivas

  • How to track web request made to sharepoint site from remote computer

    I am trying to connect IBM datastage application to a sharepoint list using soap web services. I am using GetList and Getlistitems to get the data from sharepoint list. While doing this i can sucessfully connect using Getlist function , but getlistitems
    its throwing the error.
    Now i was wondering if there is a way to track the responce made by the IBM Datastage upon my SharePoint Farm. I checked the trace logs, i cant find any trace there.
    Where would i find such information to make sure connection between sharepoint server and IBM datastage has been made sucessfully.
    Thank you

    Hello, I think you can use the SQL Profiler to check the connectivity to SharePoint
    http://msdn.microsoft.com/en-us/library/ms175848.aspx
    Also, here is the long discussion about getlistitems from web services
    http://social.technet.microsoft.com/Forums/en-US/beb42af0-da8d-46cc-88eb-28d5e0ef0b00/get-list-items-from-sharepoint-list-using-listasmx?forum=sharepointdevelopmentprevious
    Hope this can help!

Maybe you are looking for