Reg: While running SGEN transaction code
Dear All,
In my system 4.7 verison is there.When i am running every transaction code i am getting ABAP dump error. So that i am running the transaction code SGEN . Once i run that transaction code i got the process 5 % completed like that. That time i was stopped that process and gone away. While now i want to run that transaction code freshly. I couldnt able to find out the initial screen for the transaction code for SGEN. I am getting final screen of the transaction code.(5% completed screen). What i have to do running the SGEN transaction code freshly.
Thanks,
Sankar M
This is not rigth, if the SGEN is interrupted or canceled the main page won´t appear unless you use back button or cancel the job using SGEN, then a new option will show indicating to generate the remaining objects that were not generated in the last run.
Just use back button and use the new option mentioned.
Similar Messages
-
Problem while executing the transaction code FMBV (Reconstruct)
We are facing a problem while executing the transaction code FMBV
(Reconstruct Availability Control in Funds Management) in it when we
execute this transaction system only updates the expenditure which is
made before technical upgrade from 4.6c to ECC6 EHP6, against the
Assigned Budget (KBFC budget type) in the Annual Budget Table (BPJA)
and
the expenditure which we made after the upgrade, the program just
ignore
it. We can also see the expenditure in the standard FBL3N report.
Please guide us.
Thanks and Best Regards,Dear Abrar
In your description, you refer to missing update after an upgrade. First of all, see if table FMIT is consistent, as it is the basis for calculating the assigned values during AVC reconstruction.
Refer to this note:
977016 FMIT: Missing totals records in Funds Management And perform following steps:
1.- Run program RGZZGLUX
2.- Run program RFFMRC04 to match totals table with line items. A test run after a successful effective run should not find inconsistencies.
3.- If RFFMRC04 does not show more inconsistencies, run FMBV as final step.
Note that this reconstruction must be done without any other budgeting/posting activities at the same time, otherwise you may cause other inconsistencies.
Please let me know the results.
Best regards,
977016 - FMIT: Missing totals records in Funds Management
Symptom
After the upgrade to ERP 2004 or higher you realize that the FMIT totals table is no longer updated in Funds Management. You start the RFFMRC04 report to reconstruct the totals, but the report still displays the missing totals after an update run.
Other Terms
FMIT, EA-PS, ECC 5.00, ECC 6.00, ECC 7.00
Reason and Prerequisites
This problem occurs due to a generation error.
Solution
Start the RGZZGLUX report to generate missing source code in FI-SL. Then start the RFFMRC04 report to reconstruct the totals, now another run of the report should no longer display any errors. -
Error while posting FB50 transaction code
Hi I am getting the below error while doing FB50 transaction code. Please help me
My company code is using EUR & country is Greece
Company code not assigned to country or country to calculation procedure
Message no. FF703
Diagnosis
An error occurred when checking the tax code. Either the assignment of company code and country or of country and calculation procedure is not correct.
Procedure
Check the system settings.
To do this, choose Maintain entries (F5).
If the program error occurred
In a standard SAP program, then create an OSS message
In a program you wrote yourself, then correct the program.
Thanks
KishoreHi
Go to OBBG -->Assign Country to Calculation Procedure and assign the Tax procedure( ie like TAXIN) to the GREECE Country.
This helps you resolve your issue.
Regards
Venkat -
How to run the Transaction Code - BIC for Bank keys uploading
Hi
How to run the Transaction Code - BIC for Bank keys uploading.
please give me suggestion.
Thanks
InduGo to BIC transaction screen
Fill the selection screen parameters as below
1. Update Run (Test Run: Check Off: Real Run:Check On)
2. Set Deletion Flag (Check On)
3. Maximum no. of records: 999999
4. Detail List (Check On)
5. Display variant: 1SAP
6. Presentation server (Select Radio Button)
7. Application server (Deselcet Radio button)
8. File name and Path: Select relavant file which is to be upload
9. Bank country: If needed (Give respective country name)
10. Select execute button or F8
NOTE: Make sure that before executing run execute TEST RUN by deselecting Update Run check box
Hope this will meet your requirement
Thanks. -
getting Exception: "@Scratchpad/1:1 exception" while running simple javascript code in mozilla scrachpad
Does this also happen if you run the code in the Web Console (Firefox/Tools > Web Developer)?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
How to get which tables are being updated by running any transaction code
Hi experts,
please tell me how to find which system table are being updated after running any transaction code .
please tell me the procedure to find that.
Thanks & Regards,
YogeshHi yogesh patil,
for the dbtable..
goto technical settings and activate the log...
it will tells u..
transaction...Table history (SCU3)
Log data changes
The logging flag defines whether changes to the data records of a table
should be logged. If logging is activated, every change (with UPDATE,
DELETE) to an existing data record by a user or an application program
is recorded in a log table in the database.
Note: Activating logging slows down accesses that change the table.
First of all, a record must be written in the log table for each change.
Secondly, many users access this log table in parallel. This could cause
lock situations even though the users are working with different
application tables.
Dependencies
Logging only takes place if parameter rec/client in the system profile
is set correctly. Setting the flag on its own does not cause the table
changes to be logged.
The existing logs can be displayed with Transaction Table history (SCU3)
Reward points if helpful -
Getting an unusual error while running a transaction
Hi Experts ,
While i am running a customized transaction for vb7 that is rebate settlement , I have input field on agreement screen of payment method . Whenever , i put any value in that field and run the transaction , it gives me an error " Input values must be defined in Table T042Z. The value or
values ' T ' are not specified in this table. " whereas when i check the table T042Z for payment method values , the values i m entering are present there . I cannot get why its showing this error .
Could anyone plz help as its very urgent req ..
Thanks in advance ..
AnkitAnkit,
Please close this duplicate thread.
Rich,
You are welcome. -
Error while running a sample code
Hello,
I 'm getting the following error while i'm trying to run a
sample code which I have imported into Flex 3.
===================================================================
Severity and Description Path Resource Location Creation Time
Id
unable to open 'C:\Documents and Settings\sn55179\My
Documents\Flex Builder
3\FlexForDummies_Chapter3_Code\libs'FlexForDummies_Chapter3_Code
Unknown 1237909480511 215
===================================================================
Can anyone help me in resolving this issue.
Many thanks in advance.It's very frustrating that FB stops working when the libs
folder is missing. If you are checking in project files to a source
control app like Perforce, empty folders don't get added, so if you
don't add an initial dummy file, the next time you do a clean sync,
the libs folder may not be there, and even though there is nothing
there, FB complains. :-( -
Error while running the Sample code
Hi,
I am using jdeveloper 10.3 and I was trying to run the sample application that is present in the following url. I didnt change any thing in the code.
http://www.oracle.com/technology/sample_code/products/jdev/readmes/samples/ldapdatacontrol/ldapapplication/public_html/index.html
But While running the Test.java I get the following error. Is there any one who can help me in this please?
javax.naming.OperationNotSupportedException: [LDAP: error code 53 - Please enter more characters]; remaining name 'dc=yourcompany,dc=users'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3058)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2931)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2737)
at com.sun.jndi.ldap.LdapCtx.searchAux(LdapCtx.java:1808)
at com.sun.jndi.ldap.LdapCtx.c_search(LdapCtx.java:1731)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(ComponentDirContext.java:368)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:338)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:321)
at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:248)
at dc.ldap.model.LDAPSearch.executeSearch(LDAPSearch.java:55)
at dc.ldap.runtime.Test.main(Test.java:19)
Exception in thread "main" java.lang.NullPointerException
Thanks,
Haripriya.SProbably you'll get more answers when you post this kinda questions in the JDev forum.
-
Error while Running Receiving Transaction Manager
Hi.,
We have 11..5.10.2 on AIX 5.3 intermeditley we are getting the below error for Receiving Transaction Manager. for temporary sloution we will restart the Receiving Transaction Manager is there any permanent solution for this.....?
we have two Receiving Transaction Manager process.
Error
"APP 00204: Concurrent manager encountered an error while running the spawned
concurrent program Receiving Transaction Manager: rcvoltm TM:Timeout"Hello.
Have a look on MOS Doc ID 1071727.1
Octavio -
LOAD_VERSION_LIST while running SGEN
Hi
I am getting following errors when I run SGEN after ABAP Support Packages:
Load_Version_lost
ShrtText
The version of program "SAPSHDTV" in the database has the wrong format.
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLSCNT" had to be terminated because the ABAP processor discovered an invalid system state.
I am getting this error when I refresh the SGEN screen.
Any ideas?
Regards
Chanduhi Chandu
I don't think you upgraded your Kernel Level.Check the SAP OSS notes numbers - 354272 & 672268. It will solve your problem.
The solution is from the Note 672268. Check it for more details.
<i>Different kernel levels on different application servers
Make sure that you are using the same kernel patch level on all application servers.
If you have run your system with mixed kernels for a long time, and if these kernel levels contained different sub-versions, generate all existing loads again using SGEN (generate a large number of programs only if no users are logged on).
For R/3 Release 4.5B or lower, you can use Transaction SAMT or the ZRSGESUB report to generate a large number of programs (see Note 162991.)
2. Standard scenario
If all application servers have the same kernel patch level, but LOAD_VERSION_LOST dumps still occur frequently, the best solution is to send a message to the users asking them to restart the transaction (for example: /nva01).
This loads the new load version, and the user can continue to work as normal.
!! You should refrain from generating unchanged programs explicitly. !!
If you use tools to generate certain program packages in advance after importing transports or Support Packages, use Transaction SGEN with the following variant:
Regenerate Existing Loads
Only Generate Objects with Invalidated Load
This prevents the runtime error LOAD_VERSION_LOST occurring for unchanged programs.
If runtime error LOAD_VERSION_LOST occurs again and again over a longer period of time, update all loads on the database to the latest sub-version at an appropriate time by generating a large number of programs (SGEN ).
All users should log off before you do this. You then generate all existing loads using Transaction SGEN.
To speed up the process, choose to generate on all servers (note: if you are using different hardware in your system, you must generate the loads for each piece of hardware).
As a final step, restart all servers to reinitialize the buffers.
Caution:
You should generate a large number of programs only when no users are logged on; otherwise, further LOAD_VERSION_LOST dumps will occur for the users who are logged on.
In addition, it is to be expected that SGEN itself will sometimes terminate with dump LOAD_VERSION_LOST, since all programs are generated and moved to the program buffer.
However, you can restart the SGEN run again and again, and only the outstanding programs are generated.</i>
Regards
Arun. -
Getting error while running Receiving Transaction Processor
Hi all,i am getting an error in po_interface_errors after running Receiving Transaction Processor concurrent program
INTERFACE_TYPE COLUMN_NAME ERROR_MESSAGE
RCV-856 INTERFACE_TRANSACTION_ID RCV_TP_INVALID_TRX_TYPE
TABLE_NAME
RCV_TRANSACTIONS_INTERFACEI am trying to do an Inter Org transfer and i put the transaction_type as 'RECEIVE' .Can someone kindly suggest what should be the transaction_type for an Inter Org Transfer in rcv_transactions_interface table.Any help is appreciated
Thanks in advance!!HI,
We are getting the transaction_type error eventhough the transaction_type is a valid.
Please advise.
Regards
MV -
Reg : Enhacement for the transaction code MD04
Hi experts,
I have implemented an user exit for the transaction code MD04 where in the stock/requirement list I am supposed to add a new column for the exception number which displays the exception description for the corresponding exception number.
The coding part for fetching the exception description for the corresponding exception number is done in the include 'ZXM61U03'.
The problem is in the importing parameter IMDEZEXIT in which all the screen data will be present basing on which the data fetching is done .The AUSKT(Exception number) value is not getting populated . All the other data in the row is getting populated.
Please suggest e a solution for this.
Regards,
Ramkishore.Hi
Hope it will help you.
reward if help.
Please use FM MD_STOCK_REQUIREMENTS_LIST_API to get all information for transaction MD04/MD05.
You might also want to check out the function module API.
MD_MRP_LIST_API
and also
check this link for extracting data from MRP tables:
http://www.sap-img.com/pp001.htm -
Items creation while running FPOP transaction (0FC_BP_ITEMS)
Hi everybody,
I implemented business partner delta extraction on our BI system. I would like to know if DFKKOP records insertion is possible while FPOP transaction is running ? I would like to extract partner items daily, but FPOP may be launched while invoicing and billing jobs are running. I'd like to be sure that creating items (DFKKOP and DFKKKOBW insertions) while filling delta queue 0FC_BP_ITEMS (FPOP transaction, which reads DFKKKOBW table) doesn't make theses processes to forget any item).
Best regards
Edited by: SEBASTIEN SACHON on Oct 7, 2009 3:42 PMUse FPSCHEDULER transaction or program RFKK_MA_SCHEDULER to schedule it from SM36 through batch process.
Ram -
Error while running compiled java code
Hi
I have an evaluation license of the JDeveloper2.0 installed on my WindowsNT 4.0 workstation.
I seem to have a problem running my compiled jave code. After compiling the source code(.java file) when I try to run the same I get a message saying
"<FileName> not found in outpath classpath or sourcepath ".
What does this mean and how can I rectify it?
Regards
Sree
nullYour classpath tells Java run time where to look for the class files it needs. In JDeveloper the class path is set in your project properties. Select Project->Properties and check that the source and output paths correspond to your myprojects and myclasses directories.
Maybe you are looking for
-
Good evening dear experts, i use Adobe Acrobat 9 pro extend to convert word, ppt, jepgs etc. into pdfs. No if i 1) convert a ppt into a pdf: it asks --> "save as" --> converts --> opens the file 2) convert a jpeg into a pdf: it instantly --> opens th
-
hi , i am using IDOC_OUTPUT_INVOIC for billing documents, the issue is when ever the idoc is created for a particular billing document the segment E1EDK05 has only data of only a particular CONDITION TYPE . how ever the requirement is to obtain all
-
Is there a way to have portions of my library on different drives?
Right now I have all of my projects on my macbook pro. I keep the vault on an external 500gb drive. My total library is getting very large and will keep expanding. At some point soon I will not have enough room on the pro. I would love to have curren
-
Differences between clients and devices in Cisco Prime infrastructure
Hello It seems to be a very simple question : I read the Prime Licensing Guide in order to size the right version of OVA to deploy in my datacenter . I don't understand what is a "client" , because there is a topic about it in the data sheet :(cf jo
-
I can't upload or down load graphics from my Photobucket account.
When I copy the codes to use on my website, we only see a torn page looking thing. This just started happening about a month ago. It was random but now it's all pictures of smilies, and any graphics I try to post. I've had this same account with phot