Regading function module

hi to all,
   how to pass select-options in function module.
   in our program one select-option iz dere.
      this select-option must pass to one exporting parameter in standard function module.
   reagrds
satya

hi to all,
itz a standard function module.
in fun module,only one exporting parameter contains same data type like select-option.
v can pass this select-option to dat exporting parameter only.
       if i pass ,like
              exporting
                 snd = g_art[]
it throws error,both r not same data type.
                snd = g_art-low.
it wrks fine.
but wat abiut high value.

Similar Messages

Regading function module to change User Status IN CJ02

Hi All,
I need to chage System status from Budget Assigned(BDAS) to Release. Can any body help me is there any FM to change this status.Tell me ASAP
Thanks,
Sagar.

Hi,
BAPI_BUS2001_SET_STATUS: For Project Defn, WBS
BAPI_BUS2002_SET_STATUS: For Networks
Regards

Function Module to find out the release value in contract

Dear All,
I have to upload the contract with new accoutn assignment without changing the existing contract. For that i have to download all the existing contract data with value.
In that case i have some issues regarding the value.
For example : In the system old contract is created with value 1000 and the released value as 500.
In that case i have to uload the new contract with all the details of existing contract with value of 500 (1000-500=500).
How can i get the value (500) and from which table.Is there any functional module to find out the release value in contract.
Thanks and regads,
PM
Edited by: PM on Jan 21, 2010 8:40 AM
Edited by: PM on Jan 22, 2010 9:48 AM

Hi
You need to link the table VBFA and VBAK.
For a contract you can check all the subsequent document (which you can filter whether you want to see Order / delivery / Billing) in VBFA and then from there pick the subsequent document no. and then from VBAK you can pick the Net value of these subsequent documents, and so you will have both the values (value of Contract and value in subsequent document) and you can determine the balance value.
Regards
Amitesh Anand

Function Module to get BEGIN and END date of a month?

Hello everybody,
Is there any function module to get BEGIN and END date of a month
GIVEN EITHER THE CURRENT SYSTEM DATE or MONTH?
Regards,
Sanghamitra.A.

hi
 CALL FUNCTION 'PA03_PERIODDATES_GET'
 EXPORTING
 f_abkrs = p_abkrs1
 IMPORTING
 f_permo = wf_permo
 f_current_begda = wf_begda
 f_current_endda = wf_endda
 CHANGING
 f_current_period = wf_pabrp
 f_current_year = wf_pabrj
 EXCEPTIONS
 pcr_does_not_exist = 1
 abkrs_does_not_exist = 2
 period_does_not_exist = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
this is the function module to get the first date and last date of a particular month
if u have any doubts ask
regads
karthik
reward points if useful

Functional module to get table entries in another system

Hi all,
Is there any functional module with which we can get the data of a table which
belongs to another system(Using RFC calls)
Thanks and Regads, Pradeep

Hi Pradeep
 you can acess another table in the database directly .Follow this way.
1 transaction code : dbco : configuration about database that you would like to connect
2.tell basis team to set system file (example Oracle ) to know the database.
3.coding , you can use code below to select the data from another database by native SQL .
PARAMETERS dbs TYPE dbcon-con_name default 'SDB'.
DATA carrid_wa TYPE scarr-carrid.
DATA lv_int TYPE i.
*Types
data: begin of ty_equi,
equipment(25) type c,
SERIALENERGY(25) type c,
end of ty_equi.
*Internal Tables
data it_equi like table of ty_equi.
data wa_equi like line of it_equi.
DATA dbtype TYPE dbcon_dbms.
SELECT SINGLE dbms
 FROM dbcon
 INTO dbtype
 WHERE con_name = dbs.
IF dbtype = 'ORA'.
TRY.
 EXEC SQL.
 CONNECT TO :dbs
 ENDEXEC.
 IF sy-subrc <> 0.
 RAISE EXCEPTION TYPE cx_sy_native_sql_error.
 ENDIF.
 EXEC SQL.
 OPEN dbcur FOR
 SELECT
 EQUIPMENT,
 SERIALENERGY
 FROM emd.meter
 ENDEXEC.
 DO.
 EXEC SQL.
 FETCH NEXT dbcur INTO :wa_EQUI
 ENDEXEC.
 IF sy-subrc <> 0.
 EXIT.
 ELSE.
 WRITE: /
 wa_equi-equipment,
 wa_equi-SERIALENERGY.
 ENDIF.
 ENDDO.
 EXEC SQL.
 CLOSE dbcur
 ENDEXEC.
 EXEC SQL.
 DISCONNECT :dbs
 ENDEXEC.
 CATCH cx_sy_native_sql_error.
 MESSAGE `Error in Native SQL.` TYPE 'I'.
ENDTRY.
ENDIF.
Best Regards
wiboon

Function module to display inbox contents

Hi Experts,
i want to display inbox contents in webPage.
for that one i require a functionmodule which returns inbox contents. is there any function module for that one.
any help will be appriciated
With Regads
Naidu

Hi,
I think this link will help you.
http://help.sap.com/saphelp_47x200/helpdata/en/c6/8932ed449311d1893e0000e8323c4f/frameset.htm
Please reward.

URGENT: Function modules or BAPIs

Hi Experts,
I need function modules or BAPI to get the open items and cleared items G/L Account wise.
Useful replies will be surely awarded.

Hi Chakradhar,
Check tcode : BAPI
u will get all bapis there.
Regards,
Hemant

How to attached class or function module in FD03

Hi Guys
I want to attached CL_ATTACHMENT_LIST for retriving attachment list from fd03 please help to attached the function module in my program?
regards
Piroz
report zfir_aged_debtors no standard page heading
 line-size 255.
Type group
type-pools:
slis. " ALV types
Tables
tables:
adrc, " Addresses
bsad, " Accounting: Customer secondary index (Cleared)
bsid, " Accounting: Customer secondary index (Open)
kna1, " Customer master: General data
knkk, " Customer master: Credit management
knvk. " Customer master: Contact persons
Types
types:
begin of ty_bsadbsid,
 bukrs like bsad-bukrs, " Company code
 kunnr like bsad-kunnr, " Customer
 gjahr like bsad-gjahr, " Fiscal year
 belnr like bsad-belnr, " Accounting document number
 buzei like bsad-buzei, " Line item
 budat like bsad-budat, " Posting date
 bldat like bsad-bldat, " Document date
 waers like bsad-waers, " Currency
 xblnr like bsad-xblnr, " Reference
 shkzg like bsad-shkzg, " Debit/credit indicator
 dmbtr like bsad-dmbtr, " Amount
 zfbdt like bsad-zfbdt, " Baseline date for due date
 " calculation
 zbd1t like bsad-zbd1t, " Cash discount days 1
 zbd2t like bsad-zbd2t, " Cash discount days 2
 zbd3t like bsad-zbd3t, " Net payment terms period
 rebzg like bsad-rebzg, " Number of the invoice
 rebzt like bsad-rebzt, " Follow on document type
end of ty_bsadbsid,
ty_it_bsadbsid type ty_bsadbsid occurs 0,
begin of ty_merged,
 kunnr like kna1-kunnr, " Customer number
 name1 like adrc-name1, " Name
 city1 like adrc-city1, " City
 post_code1 like adrc-post_code1, " Post code
 street like adrc-street, " Street
 house_num1 like adrc-house_num1, " House number
 tel_number like adrc-tel_number, " Telephone number
 fax_number like adrc-fax_number, " Fax number
 namev like knvk-namev, " First name
 namew like knvk-name1, " Last name
 telf1 like knvk-telf1, " Telephone number
 klimk like knkk-klimk, " Credit limit
 skfor like knkk-skfor, " Total receivables
 total like bsad-dmbtr, " Total amount
 rast1 like bsad-dmbtr, " Amount period 1
 rast2 like bsad-dmbtr, " Amount period 2
 rast3 like bsad-dmbtr, " Amount period 3
 rast4 like bsad-dmbtr, " Amount period 4
 rast5 like bsad-dmbtr, " Amount period 5
 rast6 like bsad-dmbtr, " Amount period 6
end of ty_merged,
ty_it_merged type ty_merged occurs 0.
Internal tables
data:
Internal table to store customer line items from BSAD and BSID
it_bsadbsid type ty_it_bsadbsid,
Internal table to store field catalog for ALV function call
it_fieldcat type slis_t_fieldcat_alv,
Internal table to store summarised data for report output
it_merged type ty_it_merged.
Structures
data:
Display variant structures
st_tvariant like disvariant,
st_variant like disvariant.
Constants
constants:
co_delim_dash type c
 value '-',
co_false type c " False
 value space,
co_koart_d like faede-koart " Customer account type
 value 'D',
co_save_u type c " User display variant
 value 'U', " saving allowed.
co_shkzg_h like bsid-shkzg " Debit/Credit indicator
 value 'H', " for credit
co_shkzg_s like bsid-shkzg " Debit/Credit indicator
 value 'S', " for debit
co_selected type c " Value of selected radio
 value 'X', " button or checkbox
co_true type c " True
 value co_selected.
Variables
data:
va_exit type c.
Selection screen definition
selection-screen: begin of block b1 with frame title text-001.
select-options:
s_kunnr for bsad-kunnr. " Customer number
parameters:
p_kkber like knkk-kkber, " Credit control area
p_pafkt like knvk-pafkt, " Contact function
p_datum like sy-datum. " Report date
selection-screen: begin of line,
 comment 01(30) text-006,
 position pos_low.
parameters:
rastbis1 like rfpdo1-allgrogr " Due date sorted 1
 default '000',
rastbis2 like rfpdo1-allgrogr " Due date sorted 2
 default '000',
rastbis3 like rfpdo1-allgrogr " Due date sorted 3
 default '000',
rastbis4 like rfpdo1-allgrogr " Due date sorted 4
 default '000',
rastbis5 like rfpdo1-allgrogr " Due date sorted 5
 default '000'.
selection-screen: end of line.
selection-screen: end of block b1,
 begin of block b2 with frame title text-002.
parameters:
p_varint like disvariant-variant. " Display variant.
selection-screen: end of block b2.
Initialisation
initialization.
Provide default periods for due date sorted list.
rastbis1 = 0.
rastbis2 = 30.
rastbis3 = 60.
rastbis4 = 90.
rastbis5 = 120.
Default report date to current.
p_datum = sy-datlo.
Default credit control area to BP01.
p_kkber = 'BP01'.
At selection screen on value request for
at selection-screen on value-request for p_varint.
Provide display variant list for this program.
call function 'REUSE_ALV_VARIANT_F4'
 exporting
 is_variant = st_variant
 i_save = co_save_u
 importing
 e_exit = va_exit
 es_variant = st_tvariant
 exceptions
 not_found = 2.
if sy-subrc eq 2.
 message id sy-msgid type 'S'
 number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
 if va_exit eq space.
 st_variant = st_tvariant.
 p_varint = st_tvariant-variant.
 endif.
endif.
At selection screen
at selection-screen.
Load display variant.
if not p_varint is initial.
 move st_variant to st_tvariant.
 move p_varint to st_tvariant-variant.
 call function 'REUSE_ALV_VARIANT_EXISTENCE'
 exporting
 i_save = co_save_u
 changing
 cs_variant = st_tvariant.
 st_variant = st_tvariant.
else.
 clear st_variant.
 st_variant-report = sy-repid.
endif.
if p_kkber is initial.
Ensure credit control area is specified.
 message e000(zgen) with 'Credit control area must be specified'.
endif.
if p_pafkt is initial.
Ensure contact person function is specified.
 message e000(zgen) with 'Contact person function must be specified'.
endif.
Start of selection
start-of-selection.
Extract open customer items from BSID
select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
 dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
 from bsid
 into table it_bsadbsid
 where kunnr in s_kunnr
 and budat le p_datum.
Extracct cleared customer items from BSAD
select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
 dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
 from bsad
 appending table it_bsadbsid
 where kunnr in s_kunnr
 and budat le p_datum
 and augdt ge p_datum.
Ensure that items were not selected twice while getting data from the
open and cleared items tables (Only if transaction occured during
report run).
sort it_bsadbsid by bukrs belnr gjahr buzei.
delete adjacent duplicates from it_bsadbsid
 comparing bukrs belnr gjahr buzei.
if it_bsadbsid[] is initial.
No data found for selection
 message s001(zgen).
 exit.
endif.
Merge data for report output
perform merge_data tables it_bsadbsid
 it_merged.
Build field catalog
perform build_field_catalog tables it_fieldcat.
Output report via ALV
perform output_report_via_alv tables it_fieldcat
 it_merged.
*& Form merge_data
 text
form merge_data tables pa_it_bsadbsid type ty_it_bsadbsid
 pa_it_merged type ty_it_merged.
Local work areas
data:
lwa_bsadbsid type ty_bsadbsid,
lwa_merged type ty_merged.
Local structures
data:
lst_faede like faede.
Local variables
data:
lva_daysover type i,
lva_merged_tabix like sy-tabix.
loop at pa_it_bsadbsid into lwa_bsadbsid.
Lookup merged entry for customer
 clear lwa_merged.
 read table pa_it_merged into lwa_merged
 with key kunnr = lwa_bsadbsid-kunnr
 binary search.
 lva_merged_tabix = sy-tabix.
 if sy-subrc ne 0.
 Create new merged record for customer
 lwa_merged-kunnr = lwa_bsadbsid-kunnr.
 Get customer details from KNA1
 clear kna1.
 select single *
 from kna1
 where kunnr eq lwa_bsadbsid-kunnr.
 Get customer address details from ADRC
 clear adrc.
 select single *
 from adrc
 where addrnumber eq kna1-adrnr
 and date_from le p_datum.
 lwa_merged-name1 = adrc-name1.
 lwa_merged-city1 = adrc-city1.
 lwa_merged-post_code1 = adrc-post_code1.
 lwa_merged-street = adrc-street.
 lwa_merged-house_num1 = adrc-house_num1.
 lwa_merged-tel_number = adrc-tel_number.
 lwa_merged-fax_number = adrc-fax_number.
 Get credit limit details from KNKK
 clear knkk.
 select single *
 from knkk
 where kunnr eq lwa_bsadbsid-kunnr
 and kkber eq p_kkber.
 lwa_merged-klimk = knkk-klimk.
 lwa_merged-skfor = knkk-skfor.
 Get customer contact person details from KNVK
 clear knvk.
 select single *
 from knvk
 where kunnr eq lwa_bsadbsid-kunnr
 and pafkt eq p_pafkt.
 lwa_merged-namev = knvk-namev.
 lwa_merged-namew = knvk-name1.
 lwa_merged-telf1 = knvk-telf1.
 insert lwa_merged into pa_it_merged index lva_merged_tabix.
 endif.
Interpret debit/credit indicator
 case lwa_bsadbsid-shkzg.
 when co_shkzg_h.
 Credit
 lwa_bsadbsid-dmbtr = 0 - lwa_bsadbsid-dmbtr.
 when co_shkzg_s.
 Debit
 endcase.
Perform ageing
 clear lst_faede.
 move-corresponding lwa_bsadbsid to lst_faede.
 lst_faede-koart = co_koart_d.
 call function 'DETERMINE_DUE_DATE'
 exporting
 i_faede = lst_faede
 importing
 e_faede = lst_faede
 exceptions
 others = 1.
 lva_daysover = p_datum - lst_faede-netdt.
Accumulate total.
 add lwa_bsadbsid-dmbtr to lwa_merged-total.
 if lva_daysover le rastbis1.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast1.
 else.
 if lva_daysover le rastbis2 or
 rastbis3 is initial.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast2.
 else.
 if lva_daysover le rastbis3 or
 rastbis4 is initial.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast3.
 else.
 if lva_daysover le rastbis4 or
 rastbis5 is initial.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast4.
 else.
 if lva_daysover le rastbis5.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast5.
 else.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast6.
 endif.
 endif.
 endif.
 endif.
 endif.
Update the merged record
 modify pa_it_merged from lwa_merged index lva_merged_tabix.
endloop.
endform. " merge_data
*& Form build_field_catalog
 text
form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
Local work areas
data:
 lwa_fieldcat type slis_fieldcat_alv.
--WG1K903216: Start Insert-
data: v_datum type datum,
 v_mdmth type datum,
 v_datxt type string,
 v_noday type i.
--WG1K903216: End Insert---
refresh pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'KUNNR'.
lwa_fieldcat-ref_tabname = 'KNA1'.
lwa_fieldcat-ref_fieldname = 'KUNNR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '1'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAME1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'NAME1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '2'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'CITY1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'CITY1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '3'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'POST_CODE1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'POST_CODE1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '4'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'STREET'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'STREET'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '5'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'HOUSE_NUM1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'HOUSE_NUM1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '6'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TEL_NUMBER'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'TEL_NUMBER'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '7'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'FAX_NUMBER'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'FAX_NUMBER'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '8'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAMEV'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'NAMEV'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '9'.
lwa_fieldcat-seltext_l = 'Contact first name'.
lwa_fieldcat-seltext_m = 'Contact Fname'.
lwa_fieldcat-seltext_s = 'Ctct Fname'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAMEW'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'NAME1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '10'.
lwa_fieldcat-seltext_l = 'Contact last name'.
lwa_fieldcat-seltext_m = 'Contact Lname'.
lwa_fieldcat-seltext_s = 'Ctxt Lname'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TELF1'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'TELF1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '11'.
lwa_fieldcat-seltext_l = 'Contact phone no.'.
lwa_fieldcat-seltext_m = 'Contact phone'.
lwa_fieldcat-seltext_s = 'Ctct Phne'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'KLIMK'.
lwa_fieldcat-ref_tabname = 'KNKK'.
lwa_fieldcat-ref_fieldname = 'KLIMK'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '12'.
lwa_fieldcat-seltext_l = 'Credit limit'.
lwa_fieldcat-seltext_m = 'Credit limit'.
lwa_fieldcat-seltext_s = 'Crdt limit'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'SKFOR'.
lwa_fieldcat-ref_tabname = 'KNKK'.
lwa_fieldcat-ref_fieldname = 'SKFOR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '13'.
lwa_fieldcat-seltext_l = 'Credit used'.
lwa_fieldcat-seltext_m = 'Credit used'.
lwa_fieldcat-seltext_s = 'Crdt used'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TOTAL'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '14'.
lwa_fieldcat-seltext_l = 'Total'.
lwa_fieldcat-seltext_m = 'Total'.
lwa_fieldcat-seltext_s = 'Total'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST1'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '15'.
--WG1K903216: Start Delete-
concatenate '<'
 rastbis2
 into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis2.
Always use the middle of the report month as a heading reference date.
concatenate p_datum+0(6) '15' into v_mdmth.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '+'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST2'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '16'.
--WG1K903216: Start Delete-
concatenate rastbis1
 rastbis2
 into lwa_fieldcat-seltext_l
 separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis1.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '+'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST3'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '17'.
--WG1K903216: Start Delete-
concatenate rastbis2
 rastbis3
 into lwa_fieldcat-seltext_l
 separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis2.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '-'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST4'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '18'.
--WG1K903216: Start Delete-
concatenate rastbis3
 rastbis4
 into lwa_fieldcat-seltext_l
 separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis3.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '-'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST5'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '19'.
--WG1K903216: Start Delete-
concatenate rastbis4
 rastbis5
 into lwa_fieldcat-seltext_l
 separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis4.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '-'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST6'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '20'.
--WG1K903216: Start Delete-
concatenate '>'
 rastbis5
 into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis5.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '-'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due By' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
endform. " build_field_catalog
*& Form output_report_via_alv
 text
form output_report_via_alv
 tables pa_it_fieldcat type slis_t_fieldcat_alv
 pa_it_merged type ty_it_merged.
Local variables
data:
 lva_repid like sy-repid,
 lva_formname type slis_formname.
lva_repid = sy-repid.
lva_formname = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = lva_repid
 i_callback_user_command = lva_formname
 i_save = 'A'
 is_variant = st_variant
 it_fieldcat = pa_it_fieldcat[]
 tables
 t_outtab = pa_it_merged
 exceptions
 program_error = 1
 others = 2.
endform. " output_report_via_alv

Hi shiva
Thanks for your help,
Can you check this coding and revert me back ASAP Please.
REPORT BDS_GOS_CONNECTION.
DATA : logical_system LIKE BAPIBDS01-log_system.
 CLASSNAME LIKE BAPIBDS01-CLASSNAME
 OBJKEY LIKE SWOTOBJID-objkey.
PARAMETERS: pa_lo_sys BAPIBDS01-log_system,
 pa_class like BPIBDS01-CLASSNAME,
 pa_objkey like swotobjidobjkey.
AT SELECTION-SCREEN.
CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
 EXPORTING
 bor_id = bor_id
 IMPORTING
 logical_sytem = pa_lo_sys.
 classname = pa_class.
 objkey = pa_objkey.
 EXCEPTIONS
 no_objects_found = 1
 internal_error = 2
 internal_gos_error = 3.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
clear v_attno1.
i_object1-typeid = 'BUS2012'.
i_object1-catid = 'BO'.
i_object1-instid = i_yItem-docno.
call method cl_gos_attachment_query=>count_for_object
 exporting
 is_object = i_object1
 ip_arl = space
 receiving
 rt_stat = i_stat1.
read table i_stat1 into wa_stat1 index 1.
if sy-subrc eq c_0.
 move wa_stat1-counter to v_attno1.
endif.
CALL METHOD cl_gos_attachment_query=>count_for_object
EXPORTING
is_object = object
ip_arl = space
RECEIVING
rt_stat = lt_stat.
READ TABLE lt_stat INDEX 1 into ls_stat.
count = ls_stat-counter.
*The object has to be a concatenation of your document, like this:
CONCATENATE object-instid tab-gjahr INTO object-instid.
ELSE.
CONCATENATE tab-bukrs tab-belnr tab-gjahr INTO
object-instid.
ENDIF.

Function Module to Release Scheduled Jobs

Dear All,
I have a requirement to create all the background jobs in SCHEDULED status, this is achieved by using the function modules JOB_OPEN, JOB_SUBMIT and JOB_CLOSE.
Now at a later point of time, i want to release only a few jobs, which were created using the above mentioned procedure. Insead of doing it manually, is there any way to automate this step ??
Regards,
kartik

Dear Mr. Parupalli,
That solved my problem. Thank you.
Regards,
kartik

Call RFC Function Module and return 1000 records at a time

I would like to call a Remote Enabled Function Module from a non SAP system. This function module will select data from the database and return it to the calling program.
Suppose there are 100,000 records that need to be returned, but the calling module would like the data in chunks of 1000 records. Therefore the calling program would call the FM 100 times.
How do I code the function module to know on each subsequent call to grab the next chunk of 1000 records?
Let me know if additional information is needed.
Thanks,
Aaron

Hello,
Here is how you can go for this issue:
1. Create one RFC function module with following parameter. These parameters are with respective of chunking logic.
     Import: Package Size
     Export: Total number of records
     Changing: chunk count
Implement following logic:
1. First of you need to know how many chunks you need to fetch for that get the count of total number of records. This is one
    time activity so you better maintain one flag import parameter will be set to 'X' only first call.
2. Get the number of chunk using total number of records / chunk size for e.g. 1000 / 100 so chunk count = 10.
3. Define internal chunk counter in function module which will be used to locate the correct chunk depending on the chunk
    counter value sent from calling program.
4. Send first call with package size 100 and chunk count = 1, execute select statement and increment internal
    chunk count check if chunk count = internal chunk count in current case chunk count = 1 so exit select statement and return
    with first chunk.
5. Send second call with package size 100 and chunk count = 2. Execute select statement and check chunk count with internal
    chunk counter, in current case it will be 1 so skip that data and go for next chunk of 100 records increment internal chunk
    counter. In this case it will match with external chunk count = 2. load output table with that data and return to calling program.
6. Repeat step 4 until you reach last chunk.
You need to use SELECT...ENDSELECT with PACKAGE SIZE addition so for every loop it will return number of records mentioned in package size.
Hope this helps.
Thanks,
Augustin.

Error while passing a table to a function module

Hi Iam passing a table g_tab of length 376 flat structure to the function module..under TABLES section parameter.
Changedocument_read_headers.
iam getting a complile time error like the below displayed thing. Can u tell me how to solve this ?
In the function module interface, you can specify only
fields of a specific type and length under "I_CDHDR".
Although the currently specified field
"G_CDHDR_TAB" is the correct type, its length is incorrect.
Edited by: kiran kumar on Jul 7, 2008 8:53 AM

probably u making a mistake while declaring the table
declare it like this in the tables section:
S_JOB LIKE RNGE_OBJID
where s_job is the internal table name and RANGE_OBJID is a structure type and NOT an internal table type.

RFC Error While Invoking A Remote Function Module.

I am invoking A remote function module while invoking it get an exception when i see the error logs
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user. , error key: RFC_ERROR_SYSTEM_FAILURE at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101) at... [see details]
can anyone pls tell me what the error is..
regards
Nilesh Taunk.

Hi Nilesh Taunk,
You can go through the following steps
-o JCO Exceptions 1. http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
-o JCO Exceptions 2. http://help.sap.com/saphelp_nw04/helpdata/en/f6/e002416225f023e10000000a155106/frameset.htm
-o Restart of the J2EE instance and try re-importing the RFC model. Sometimes it helps.
-o Logon into WebDynpro Content Administrator as a J2EE Admin and check if the JCO Connections and User /pwd of your application is correct. You can ping or test your JCO connections. if something is wrong, enter the values again for JCO n retest them.
-o Try undeploying or removing the complete application and redeploy it.
Tu undeploy please go to
Go to Visual Admin -> Server -> Services -> Deploy ->

Under Runtime Tab
select the server, open the tree , you would find the webdypro list there.
Now select an application, first stop it, remove it and redeploy if necessary.
Let us know if you could solve the problem or not, gud luck!
Rgds,
Sreenivas.

Error while generating Web Service from a function module.

Hi Experts,
I am trying to create a web service from function module by doing the steps as mentioned in the below document:
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID1146834250DB10778842957931285337End?rid=/library/uuid/80fa3dff-ce76-2a10-3f94-f3df8f2db5a2&overridelayout=true
When i save it as an local object instead of generating the Web Service it gives me the below error:
"Error during activation of Web Service"
Kindly let me know what needs to be done inorder to resolve this issue.
I have a feeling that this error may be with respect to some authorizations, in that case how do we resolve it
Helpful Inputs Awaited.!!!
Thanks
Dhwani

Hi Dhawani,
Hi Pavan,
Can you please elaborate...how this will help??
Thanks
Dhwani
I dont know the specific reason but internally there may some inconsistancy but i faced the same error and i tried with saving it in the package.
Thanks

CNTL_ERROR while calling a function module from Java webdynpro

I am calling a RFC function module from javawebdynpro app
which inturn calls a function module performing BDC on CAPP transaction. When I run this from SE37 of the same system or a different system everything works fine. But when called from Java webdynpro app, it raises a CNTL_ERROR exception and creates a short dump.
Any help on this is highly appreciated

Good catch, BI Learner. This was exactly it: when assigning the values from SOURCEFIELDS directly to the import/export parameters, you have to make sure that the types are EXACTLY the same, otherwise it will not work (the routine stops with an error when calling the FM, but there is no dump).
Therefore, to solve my problem, I created the declarations precisely as expected by the FM and assigned the values to these fields:
DATA:
      SOURCEVAL TYPE /BIC/OIINVQTY,
      SOURCEUOM TYPE /BIC/OIUSUOM,
      USITM TYPE /BIC/OIUSITM,
      TARGETUOM TYPE /BIC/OIUSUOM,
      CONVERTED_COST TYPE /BIC/OIINVQTY.
DATA PRODUCTION_UOM TYPE /BIC/OIUSUOM.
" get the Production UOM
    SELECT SINGLE I~/BIC/USPRDUOM
      FROM /BIC/PUSITM AS I
      INTO PRODUCTION_UOM
      WHERE I~/BIC/USITM = SOURCE_FIELDS-/BIC/USITM AND I~OBJVERS = 'A'.
    IF ( SY-SUBRC = 4 ). " no records found
      "RAISE PARTNO_NOT_FOUND.
      RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
    ENDIF.
" load the parameters
    SOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC.
    SOURCEUOM = SOURCE_FIELDS-BASE_UOM.
    USITM = SOURCE_FIELDS-/BIC/USITM.
" then you can call the FM
    CALL FUNCTION 'Z_CA_CONVERT_US_COST'
      EXPORTING
        PSOURCEVAL                = SOURCEVAL
        PSOURCEUOM                = SOURCEUOM
        PUSITM                    = USITM
        PTARGETUOM                = PRODUCTION_UOM
      IMPORTING
        PTARGETVAL                = CONVERTED_COST
      EXCEPTIONS
        CONVERSION_NOT_MAINTAINED = 1
        PARTNO_NOT_FOUND          = 2
        OTHERS                    = 3.
" ... [do the rest]
Thanks for your help,
Dennis

Error in creation of function module in e.c.c 6.0

HI GURUS,
i encountered a problem while creating function module in e.c.c 6.0, the error is 'THE MAIN PROGRAM OF DOES NOT BEGIN WITH "FUNCTION-POOL". kindly help me in solving this issue.

Hi,
You need to activate the Function Group.
GO to Se80 --> Select function group from list box --> press enter --> Select you function group > Right click> Activate.
Thanks,
Sriram Ponna.

Regading function module

Similar Messages

Maybe you are looking for