Regading Variable in Planning function in integrated Planning

Hello All,
I have a requirement where i have to run a planning function to copy the data of one key figures to other.
But i need a input screen before execution of this planning function where i could insert the characteristics values for which i do not need this Planning Function to be Executed.
Please let me know how to do this.
I think this can be done using input ready variables.But i m not sure.
Regards,
Pratighya

Hi All,
With regards to the above issue, I have similar question and appreciate any inouts.
Used a Planning function - type FORMULA
Function needs an Input parameter to execute.
So I want to create a Planning IP variable and assign it to the function call in my formula.
From the Front end WAD/BEX - want to exceute the planning function by passing inpur value.
Regards
Rao

Similar Messages

Use of forecast planning function in Integrated planning

Hai ,
Can I Know What is the use forecast planning function in Integrated planning.
Give me One Example.
Please tell What i hv to select in aggregation level, Filter, and Planning function for doing forecast.
Regards
Kishore.

Hi,
Filter is indeed used in IP similar to how planning package was used in BPS. There really is no difference 'conceptually'.
What you have seen is the different options IP offers compared to BPS regarding planning function execution. You can execute planning function directly or using a planning sequence in an application (although in planning modeler, its only a planning sequence that can be executed, for eg., for testing purpose).
If you just execute a planning function without specifying any restriction, it will operate on the entire set of planning data. Whether its a planning sequence or planning function, the data it operates on can be restricted by binding the various characteristics (or variables) using various DPs in the application. What kind of dynamic selection are you looking at?
You can see following links if you have not read them already -
http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f8dc73b56bede10000000a11466f/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/44/33a31fd463060ce10000000a155369/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f92373b56bede10000000a11466f/content.htm
These are for WAD; you can find similar links for the BI Analyser.

Variable screen in Planning Function for Integrated Planning

Hi all.
I have created a planning application with the WAD, based on an Input_ready Query. Manual planning works fine and even planning functions go well, using the command wizard.
However, if I try to use a variable in a planning function and I set the parameter to pop-up the variable screen within the command wizard for a planning function, I get an 'uncaught exception'. An almost blank IE-window pops up which is supposed to display the variables, but it fails.
Does anybody know how to solve this?
Gr.,
Marc.

Hello Marc,
do you still have this error? I encountered the same problem with SPS 9. Maybe you should install at least SPS 10. The variable popup works correct there.
Best regards
Martin

Assignment of filter to planning function in integrated planning

Dear experts
I am a bit new in Integrated planning and have a following conceptual question regarding filter object in IP
In IP it seems that filter is a substitute object for planning package in BSP.
I however do not see any possibility to assign filter to a planning function except in a planning sequence. I would however imagine to have a functionality to dynamically select the filter when i want to execute a planning function via application (excel based or Web).
It seems that filter is not even required if a planning function is executed seperately (not as part of planning sequence).
I have tried to execute a simple copy function without having any filter at all and it works.
Could someone pls. explain me as to the conceptual difference between object filter and object planning package.

Hi,
Filter is indeed used in IP similar to how planning package was used in BPS. There really is no difference 'conceptually'.
What you have seen is the different options IP offers compared to BPS regarding planning function execution. You can execute planning function directly or using a planning sequence in an application (although in planning modeler, its only a planning sequence that can be executed, for eg., for testing purpose).
If you just execute a planning function without specifying any restriction, it will operate on the entire set of planning data. Whether its a planning sequence or planning function, the data it operates on can be restricted by binding the various characteristics (or variables) using various DPs in the application. What kind of dynamic selection are you looking at?
You can see following links if you have not read them already -
http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f8dc73b56bede10000000a11466f/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/44/33a31fd463060ce10000000a155369/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f92373b56bede10000000a11466f/content.htm
These are for WAD; you can find similar links for the BI Analyser.

Customised Planning functions in Integrated Planning

Hi experts,
i have a requirement in my project like this.
i have 2 suppliers S1 ans S2 having data like
S1 S2
100 50
if i change the value of S1 to 90 the difference of the value (100-90) needs to add to S2 i.e 5010.(the total of S1 and S2 should be constant i.e S1S2=150 in all cases).
is there any standard Planning function to execute this scenario.please provide your inputs for this.
Thanks in advance.

Hi,
i think there is a possible way of doing this even if the total ie S1+S2 is not know.guess the solution will be long to implement it. U can use it if its necessary.
there is a paper on how t run planning functions on delta records.
You need to implement this first.
then create a planning function that has a condition for suppliers s2 alone.Read the delta records of S1, multiply the value with -1 and add it to the value of S2.
this way the total the relations can be maintained.
Regards.
Shafi

How to pass filter values to planning function in Integrated planning

Dear Experts,
I have a input ready query where the variables are filled with authorization objects by user. All variables are defined as multiple single values.
I created a workbook with 3 filter dropdown box - calmonth, company code and version (displayed as text). In the filter drop down box the user selects the company code, version and calmonth for planning. I would like to pass the selected filter values to a planning funciton. How can we pass these selected single filter values to a planning funciton?
Note: I am able to reference cells for variables that are not in filter (for eg: revaluation function with this document https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be).
Thanks,
Gnana

Hi,
Your requirement sounds similar to example given by SAP
[http://help.sap.com/saphelp_nw70/helpdata/en/45/e641e4c61256dee10000000a114a6b/content.htm]
If you do not want the from value be selected, and its already decided, then gofor restriction of values in filter than to the variable.
regards,
ravi.

Forecast function in integrated planning

In forecast function of integrated planning we need to fix forecast period time interval in tcode(RSRHIERARCHYVIRT). otherwise it will show error like
"Forecast period doesnot fall with in F4 time interval" if we fix that in respective tcode mentioned above. then it will error free.
But my doubt is we need to fix past period time interval also in the same tcode. because we need both forecast period and past period in forecast fucntion.
How we can fix both at a time, i need to fix error urgent. pls help me
I will assign very good points

Hi,
Please visit the link below
link : [http://help.sap.com/saphelp_nw70/helpdata/EN/a4/42e03fc2269615e10000000a155106/frameset.htm]
Please update the exact requirement.
Thanks
Pratyush

Allocation Function in Integrated Planning

Dear all,
When reading the documentation on Integrated Planning ("New BI Capabilities..") I noticed the Allocate function is not mentioned.
These functions are mentioned:
Revaluation
Reposting
Formulas
Currency translation
Unit conversion
Copy
Distribute with reference data
Distribute by keys
Delete
Is the Allocation function not available in Integrated Planning. Or is it now called "distribute by keys"? Would be confusing...
Kind regards,
Hans de Klein

Dear all,
the allocation function is part of the SEM installation and since SAP BW3.5 not part of planning itself. When installing the SEM, the allocation function is available in BPS but not in BI Integrated Planning.
From my perspective there two typical situations for allocation of e.g. costs from costcenter/costelement:
1. The sender Costcenter/costelement is credited:
In this case the standard distribution function (within one characteristic) would do the same.
2. An other costcenter/costelement is credited:
Here you would require a combination of a fox formula (to copy the sender to the 'other' combination and to reverse the sign) and as a second step the standard distribution function (within one characteristic, with the option of not crediting the sender).
Best Regards, Olaf Fischer

Forecast planning function in IP

Dear All
We have a requirement like forecasting future prices for next year on monthly basis.
Data of prices for the past 3 years on monthly basis is available in the InfoCubes.
Can anyone please let me know how to use the "forecast" planning function in "Integrated Planning"
to predict the future prices with stepwise procedure or provide any document explaining similar requirement.
Any prompt help regarding this will be truly appreciated and awarded with points.
Regards
Suresh

Hi,
Please visit the link below
link : [http://help.sap.com/saphelp_nw70/helpdata/EN/a4/42e03fc2269615e10000000a155106/frameset.htm]
Please update the exact requirement.
Thanks
Pratyush

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

How to call standard planning function in FOX code

Hi,
I want to call std. Distribution by reference planning function in FOX formula. Through CALL FUNCTION std planning functions can not be used.
My requirement is that because I need to execute this distribution function thousands of times with different variable values so I am planning to pass the values for these variables through FOREACH loop.
Any help is appreciated.
regards
Amit Jain

Hi Amit,
unfortunately calling a planning function inside a planning function is not possible. And calling a planning sequence from a planning sequence is not supported as well.
I think is is better if go for a more complex FOX or an exit-function if the planning function needs to be executed online.
Another way some customers are using to met similar requirements is writing a z-program which determines the variable values in a loop (e.g. by reading a z-table). Inside the loop they set the variables (in the variable container) and when this is done execute a planning sequence for the current variable setting. The whole thing could be executed e.g. in a process chain.
Hope this helps ...
Regards Matthias Nutt
SAP Consulting Switzerland

Reading manual planning function header data in exit function

Hello all,
I would like to know if is there a chance to read header data of a planning function. The planning function is determined by user selection (user choose which value will be in ) and in exit function I then modify the buffer by data which I get by calling RFC on another system.
My problem is that buffer contain all the planning data for whole planning area (it seems) so there is many unnecessary call. How can I get in exit function value specified by user at start of a planning session?
Thank you for your help

Hi,
There's some issue the planning funciton will only read the data specified by the users (variable values).
Check the configuraiton once again.
thanks

Approve and Notify in Integrated Planning

I am wanting to implement an Approve and Notify functionality in my planning application in Integrated Planning.
i.e. When all assistants have submitted their yearly goals, I want to be able to notify the regional manager that they can begin reviewing the goals. Also, when the regional manager has approved them (and performed a few functions), I want to be able to email the assistants.
I am wanting to avoid using BPS - STS if at all possible. Is there a way to have FOX Formula, or some other function, email the users when this has been performed?
I was thinking about marking a submit flag when the assistants submit their hours, and when all flags have been marked for a region, it will notify their manager.
Thoughts?

Hi,
It's quite difficult to track the status of the goal submission by all assistants if you are not using STS.
But you can send mails to assistants when their goals are approved by writing ABAP. You can't achieve that via FOX.
Try to use STS as that will fulfill all your requirements with minimal configuration efforts and no programming. Also, you will not require additional characteristic and programming logic for FLAG.
But if anyways you don't want to use STS let me know, I have the code for sending emails via planning function exit.
Regards,
Deepti

How do I implement this in BI Integrated Planning

Hi All,
I need to capture data in the following format I have data of Deliveries Qty by Plant & Material Type in DeliveredQty. The DeliveredQty is the delivqty as of a given date. I need to based on the DeliveredQty calculate the DelivQtyMonth. So if the DelivQty as of today (3rd July) is 1000 EA for 3 days in the current month. The user will provide as input the remaining working days in the month and the number of days in the month elapsed.
I need to calculate the DelvQtyMonth as follows = DeliveredQty + DeliveredQty/DaysElapsed * DaysRemaining
The user wants to enter the DaysElapsed and the DaysRemaining in variables.
Then I need to display the data in the following format:
Plant MaterialType DeliveredQty DelvQtyMonth ManualDelvQty
All data is display only columns except for ManualDelvQty I should provide for user to input data to this column.
I have created a realtime plan cube with plant materialtype DeliveredQty in it.
Can you kindly share your inputs how I can implement the DelvQtyMonth based on a variable at run time and ManualDelvQty.
How can I implement this scenario in BI Integrated Planning.
So far all I have done is implement a real time cube for capturing the data. I have data for plant materialtype Delivqty for a given fiscal year period. How can I copy this into the plan cube from integrated planning.
Also, how do I implement the variables for DaysElapsed and DaysRemaining for the user to input values to it.
Your help is greatly appreciated.
Thanks
Karen

Hi,
can you look at this
[http://help.sap.com/saphelp_nw04/helpdata/en/44/584041b02e4c0de10000000a1550b0/frameset.htm]
Regards,
muralidhar

Create ne Planning function in planning folder

Hi Experts,
I have one planning function A in X folder and my requirement is i need to create same planning function like A in planning floder Y. Please give me steps for creating planning function in planning folder.
I know how to create a planning function in planning level but i don't know how to create to a planning function in planning folder.
Please help me on this.
Thanks
SAP

Hi Mynak,
Thanks for your reply. Yes ur r correct, we cdon't create planning function in the planning folder insted o this we can drag the created planning function into planning folder.
How to drag this from left side to right side and place into global planning function area.
I am missing some thing. I couldn't slect the planning package and parameter group.
Can u let me know how to do this one.
It would be great help for me.
Thanks
SAP

Regading Variable in Planning function in integrated Planning

Similar Messages

Maybe you are looking for