Regardin a Tv card to sound card connect

Hi all
I have an MSI SLI Platinum motherboard using the onboard SB Li've 24 bit. I have creatives p5800 5. speakers attached. but these speakers use the line out i think which is what a tv card needs to connect to also.
am i right or am i wrong also if i am right in my asumption is there a way round this?
many thanks in advance

I think he means the plug is shared... If that is the case you cannot connect it like that. But there is an alternati've. You have to make a custom cable, from the stereo out of your soundcard to an internal connector, like CD_IN or TAD_IN. For that, I would go and buy a female stereo plug and an internal cd_audio connector. Remove the one end of the internal cable, and connect the wires to the female stereo plug. That's it! (Oh.. and remove a card-slot cover form your case, so you can run the cable for the outside to the inside.)

Similar Messages

  • I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?

    I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
    The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
    I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
    My dj mixer works on another mac computer with the same soundcard and different firewire cable.
    Hope someone can help
    Thanks
    Wayne

    kmiddlet88,
    yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then.

  • Airport card connected but safari not connected to internet

    Running os 10.4.1 on IMAC g5 with airport card.
    i am having some wireless network issues. when i try to connect to the linksys router that my airport card locates it tells me that i am connected to the network; but when i try to load a page in Safari it tells me that i am not connected to the internet. Internet Explorer gives me the same message.
    i have been able to test my airport card by logging into another (neighbor's) network (just for testing). it received DHCP from that router and assigned a 198.162.x.x. IP address for my computer. i originally had the same issue as far as being connected but safari wouldnt open web pages. i manually plugged in DNS numbers 208.67.222.222 and 208.67.220.220 from OPEN DNS.com and Safari instantly loaded web pages.
    when i try to do the same on the linksys network my airport card connects but Safari once again will not connect to the internet. I am receiving a DHCP IP address automatically from that router but cannot connect to the internet...
    PLEASE HELP ME (it's driving me crazy!)

    Oh man... since my last post (all of 15 minutes ago) my iMac now cannot connect to the network at all. The network status menu widget shows it as being connected (sometimes), but it can't actually connect to anything.
    Just as an experiment, I turned off MAC address filtering on the base station. Didn't help.

  • Is there any way to change the language in the iTunes/MacApp Store but still having a credit card connected to the stores "in a different languauge?

    Hi
    I'm living in Germany and I've got a German credit card connected to the stores (iTunes and MacApp) but I'd like to change the language to either English or Swedish. This way I beleive that I would be able to rent movies in another language than German on my Apple TV 2.
    Is this possible somehow?
    (When I change the language I need to have a credit card registred in the contry of that language)

    I saw that I wasn't the first person with this problem.

  • Can an original Airport card connect to an Airport Extreme base station

    I have an old iBook G3 10.3.9 with an original Airport card (System Profile says "Wireless Card Firmware Version: 8.70"). This computer/airport card connects fine with an old Airport Graphite.
    But it will not connect with my main Airport Extreme 802.11n (1st Generation), running in 802.11n (802.11b/g compatible) mode. This Airport is using WPA/WPA2 Personal wireless security. This Airport Extreme works fine with my other computers and devices.
    Does anybody know, offhand, whether it is just a setting, or is this completely unworkable?
    Thanks in advance for any input.

    I cannot remember all the details regarding the older iBooks, but suspect that the wireless card and possibly the operating system that you are using on the iBook cannot support WPA/WPA2 wireless encryption.
    As a test....
    Temporarily turn off the wireless security on the 1st Gen AirPort Extreme, then see if the iBook can connect to the wireless network that way.
    If it can, this tells you that the wireless is at least working on the iBook....but it cannot connect to the WPA/WPA2 network.
    The solution might be to use a USB wireless adapter that can handle the higher encryption levels, or connect the iBook using Ethernet.
    If the iBook still cannot connect when security is disabled during the test, then the iBook has additional issues that you may or may not wish to pursue.

  • Connecting Sound Blaster Connect to an old hi-fi to record ta

    Hi,
    Does anyone know how to connect the sound blaster connect to an old hi-fi. there seems to be only cable included that will go to the back (video?) feed of my hi-fi (the double ended white/red cable) and when i plug that in to the hi-fi and sound blaster it doesn't record anything so i assume it's not right. is there a cable i can get which i can just plug into the headphone plug on my hi-fi and then into the sound blaster? i don't understand all the technical phrases used on other messages or the website so sorry if someone has asked this question before.
    Can anyone help me? i really want to record all my old tapes onto computer.
    thanks

    I always used a stereo guitar/keyboard cable and used an adaptor to make it smaller on the computer end (my headphone socket on my hi-fi is big). But yeh, I always just used the headphone socket on the hi-fi and the line-in input on the soundcard. This has worked for every sound card I've ever had...
    You could just use something like...
    http://www.proporta.com/F02/PPF02P05.php?t_id=97&t_mode=des
    Though.

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Sound Blaster Connect: Why no Smart Record

    Apologies if this is in the wrong forum. I've just bought a Sound Blaster Connect to convert my audio tapes to MP3. The box and the instructions both say it should include Smart Recorder software to accomplish this task, but I can't find it on the CD. Am?I missing something? Do I need to download something extra?All help appreciated. Scandalxk

    I don't think it's wrong forum. I have the same problem. Installing and desinstalling programs from CD, once the smart recorder was installed, another time wasn't. No one knows why. Now the main problem for me is that if I klick on the smart recorder knob, the message "no audio equipment on this computer" appears and the program is aborted.
    So I cannot use my Sound Blaster Connect for the only purpose I bought it - for the recording.
    If you know how to fix it, please tell me.

  • Not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

    not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Lightning to 30 pin adaptor giving no sound when connected to docking station

    lightning to 30 pin adaptor giving no sound when connected to docking station

    I am always amazed in these forums by the number of people who think they are helping by asking obvious questions about the problem with no clue what the real issue is or how to help.
    That being said:
    I had the same problem after upgrading.
    Could boot your tablet, should fix the problem.
    1. power off the unit.
    2. Power on by holding the power button and volume up button at the same time.
    3. using the volume up and down button as a right and left curser, selectt the Android icon and press the power button.
    4. this will cold boot the system and the various dock functions should return.
    Warning: Selecting anything else but the android icon will reset the device to factory defaults and wipeout all your info.

  • Squeeking sound when connecting but no display

    My ipod non 1G makes squeeking sound when connecting to my computer but no display and no functionality. When disconnecting from computer he is completely dead. Any idea which component is causing that so I can repair it?

    Yes it is.
    I've also tried putting it into different USB ports as well as 3.0 and 2.0.
    And im sure that the screen works because it works fine with my MacBook Pro, so im thinking that i need some sort of driver... Not sure though...

  • Iphone 3 only blank light screen after fall on floor...say sound when connecting to Itunes

    the Iphone is not broken, but it only shows a light blue/white screen. It gives a sound when connecting to Itunes. I have tried ti hardboot but no help. im now trying to recover trough Itunes but the screen is still light blue. it can be the graphic somehow??
    What to do?
    The Phone was falled out of my hands

    The phone is CERTAINLY broken.  It worked immediately before you dropped it, and stopped working right after.  What makes you think that your dropping the phone didn't break it?
    You have 3 choices:
    You can bring your phone to Apple and pay for an out of warranty exchange ($149 in the US)
    You can buy another phone
    You can find a 3rd party repair shop in your area and see if they can ifx it.

  • Inspire T6100 - Sound Card Connectivity

    Hi Guys,
    I just got a set of T6100 speakers, but I'm unsure of how to connect them to my PC. I currently have a very old Soundblaster Live! card, which only has Spdif,mic in, line out and rear out. However, the speakers have the orange/green/black cables and I don't know which goes into where. Could anyone please advise me on how to connect the speakers to my soundcard?
    Also, I'm currently looking around for a new soundcard, but don't want to spend a fortune on it. Could anyone recommend a compatible soundcard (preferably the X-Fi series)?

    amzngbac,
    In order to fully optimize the 7.1 speaker you have, you will need to get a sound card that support 7.1 speaker system. The Audigy 2 ZS series range support this.
    http://us.creative.com/products/prod...04&product=495
    Jason

  • Sound Card Connections to Recei

    Need advice on using analog connection from soundcard to 6. channel input on receiver vs digital audio cable connection. I am running this 50 feet so that may be a consideration when running mini analog wires that far. Any help greatly appreciated!

    The only way you can run that lenght is with antenna coaxial cable of 75 ohm impedance (with RCA connectors) or glass fiber optic terminated by some data cable technician - the ordinary "optical audio cable" is made from clear plastic and doesn't go very far.
    By the way, via digital, you will have only stereo PCM in games and any other sounds - with the exception of DVD's recorded with DolbyDigital or DTS.

  • ONS 15454 SDH with 2 ML cards connected to the same RPR

    I was wondering if I could connect 2 ML cards installed in the same ONS 15454 to the same RPR ring. Thanks!

    Bob,
    If you are wanting to tie the ML100 and the ML1000 into the same RPR Ring, then you have do do it with the POS interfaces.
    For Example:
    ML 100 POS 0   - North  Microwave
    ML 100 POS 1   - connect RPR to ML 1000 POS 0
    ML 1000 POS 1 - South Microwave
    North Microwave connects RPR to South Microwave
    This creates a single Loop or Ring
    It sounds like you are using your ML1000 as a Spur to another location.  In order to create an RPR ring, you must have the cards physically connected to each other in a continuous ring.
    Aaron Reed
    Carrier Escalation - Cisco Optical TAC

Maybe you are looking for

  • Read Master Data for Process order status change (REL to CRTD)

    I am unable to read master data and thus change the status of process order from REL to CRTD. (COR2) The reason it says, error in BOM reading, Transport Requirement (TR) already generated. Even after deleting the TR (LB02), the issue still exists. Is

  • Access to MD03 from another transaction

    Hi Gurus, We did a trace to all the users, and one of them used the MD03 transaction. The point is that he has no authorization to this transaction, so probably he is accessing to it from another. Could you help me searching any transaction where the

  • Calendar Display Column Content Ordering

    I would like to order the items returned to be displayed for a day by their values or a different column? The executing SQL wraps my source and adds an order by for the date. I don't see a way to modify that in 3.1. e.g. select date, name, name_sort

  • How to remove some columns from an existing table?

    Let's say my table's structure is as follows: Table name: EMPLOYEE Columns: Name, Birthdate, Gender, Salary, Hometown, Language and so on. There are data in the table. Now I want to remove columns Hometown and Language, and I don't care the data loss

  • Report for Useful life by G/L and Asset Class

    Hello SAP Gurus'. Is there a standard SAP report we can use that gives Useful Life by G/L and shows Asset class? Thank you!!