Regarding 0txtmd field mapping in Transfomration level dso to cube

Hi All,
When I was creating transformations from my dso to cube,I faced a problem where I did not get a infoobject field 0TXTMD in the source level(dso).
But when I was checking in my dso transformation level the field 0TXTMD was present and mapped.So what colud be the problem as that field was present in dso level but not visible in cubelevel when I was creating transformations.How to go ahead with this issue.
regards

Hi Siggi,
In bw 3.5 i have this scenario.The same i would like to implement in BI 7.0,
Where is in bw3.5 i have a object called 0txtmd in infosource is assigned to ZDOCTXT element in cube.
The same as i need to implement in bi 7.0
while creating the trasnformastion from dso to cube..i could not able to find the field 0txtmd to map with the field ZDOCTXT in cube.
Regards

Similar Messages

Cost center field not getting updated to the second level dso

Hi Experts,
Data is going from one DSO to other high level DSO where in the source DSO there is cost center filled for a Purchase order but it is not in the target DSO. Target DSO fetches data from 5 DSO's and this is one of them.
Please suggest.
Thanks
Sudha

Hi Sudha,
As you say that the load from source DSO to Target DSO is the final load, so question of overwrite does not come into picture.The only point which I feel is that the data might be getting resticted somewhere...
Is there any routine in the transformation for that field available which will be restricting the load from the source DSO to the target DSO. Is there any start routine available..Please check all these things...
Hope it Helps,
Thanks,
Amit Kr.

Sample source code for fields mapping in expert routine

Hi All
Iam writing the expert routine from dso to cube for example I have two fields in dso FLD1,FLD2
same fields in infocube also ,can any body provide me sample abap code to map source fields to target fields in expert routine,your help will be heighly appreciatble,it's an argent.
regards
eliaz

Basic would be ;
RESULT_FIELDS -xxx = <SOURCE_FIELDS> -xxx
you have the source fields as source, and result fields for as the target. In between you can check some conditions as in other routines of transformation.
BEGIN OF tys_SC_1, shows your source fields ( in your case DSO chars and key figures)
BEGIN OF tys_TG_1, , shows your result fields ( in your case Cube characteristics)
Hope this helps
Derya

New field added to cube, delta DTP from DSO to cube is failing

Dear all,
Scenerio in BI 7.0 is;
data source -delta IPs-> DSO -
delta DTP---> Cube.
Data load using proces chain daily.
We added new field to Cube --> transformation from DSO to cube is active, transport was successful.
Now, delta from DSO to cube is failing.
Error is: Dereferencing of the NULL reference,
Error while extracting from source <DSO name>
Inconsistent input parameter (parameter: Fieldname, value DATAPAKID)
my conclusion, system is unable to load delta due to new field. And it wants us to initialize it again ( am i right ?)
Do I have only one choice of deleting data from cube & perform init dtp again ? or any other way ?
Thanks in advance!
Regards,
Akshay Harshe

Hi Durgesh / Murli,
Thanks for quick response.
@ durgesh: we have mapped existing DSO field to a new field in cube. So yes in DTP I can see the field in filter. So I have to do re-init.
@ Murli: everything is active.
Actully there are further complications as the cube has many more sources, so wanted to avoid seletive deletion.
Regards,
Akshay

How to add a new field in the Field Mapping

Dear Freinds,
               I have two un used fields in the Source fields to the Target Fields ,
i have to add the 3   fields which r there in the my source fields to that
of the target fields ( as per the change in the requirement) in the 5th Step
i.e Maintain Field Mapping and Conversion Rules
the Target strucutre & the Source fields( by clicking the button
Source field and selcting the fields from the popup menu) in the mapping and conversion step ,i want to add 3 fields which are availabe in the list of th source list which i want to map to the Target strucutre .
When i tried it is adding in the othe target field
presently i have mapping (5th sept ) as below.
   ZPA30_08                       LSMW
       Fields
           TABNAME                      Table Name
                               Source: ZP0008_STRC-PERNR (Personnel Number)
                               Rule :   Default Settings
                               Code:    ZPA30_08-TABNAME = 'ZPA30_08'.
           TCODE                        Transaction Code
                               Rule :   Default Settings
                               Code:    ZPA30_08-TCODE = 'PA30'.
now i want to add 3 fields Pernr,wage type and Amount , but when iam trying it is
getting and saved in the TABNAME .
How can i map please let me know .
Regards
syamla

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

ABAP code which will use function module during field mapping in LSMW

Hi,
During field mapping in LSMW, for one of the field called field, I want to use a function module 'QF05_RANDOM_INTEGER', which will generate random numbers and map that random number to that field.
How do I write ABAP code which uses function module, during filed mapping for a particluar field in LSMW ?
Please help...
Regards,
Tushar.

Hi Tushar,
You can write in FORM ROUTINE and LSMW.
I hope you know how to write ABAP code at field level.
If not ...
Come to change mode->select the field->Rule->ABAP Code
write a perform statement in ABAP code at field level.
<b>PERFORM test</b> using val
             changing valu.
Go to Utilities(at menu)->switch layout-> extras ->select Layout->check Form routine-> it will display a FORM Routine... at bottom
this is the place where you can write some code for
<b> FORM test</b> using value
          changing value1
FM call....
.ENDFORM
Get the value1 returned and use for the Field population.
Reward points if this Helps.
Manish
Message was edited by:
        Manish Kumar

How to change field mapping in IDOC

Hi Experts,
My requirement is to create a purchase requisition automatically through an interface using the IDOC sent by a *source client*.
For this i have used PREQCR as the message type, PREQCR02 as basic type.
E1BPEBANC & E1BPEBANTX are the segment type i have to use.
I have created a Z process code in which the function module that i have used is IDOC_INPUT_PREQCR.
With the help of this i can map all the field values to PR.
Now there is a field in this idoc called vendor which comes from the source client.
Now the value that is maintained in this field(vendor) should go to the Text Id that is maintained at the header level. ( i.e. the header text. i.e. In transaction ME51N, the text IDs which we can see at header level, the vendor value should go in one of this text Id ).
Now how do i do this, because I am using standard funciton module IDOC_INPUT_PREQCR in which there is already field mapping that this vaue should go in this field and so on...
Do I have to use an exit for the same ?? If yes then which is the exit ??
Please suggest.
Regards,
Priti.

Hi,
I think there is no userexits available during the processing using function module "IDOC_INPUT_PREQCR". You have to copy this function module to a Z function module. Change as per your requirement and attach the new function module with the Z Process code created by you.
Regards
Vinod

Related Content Field Mapping using "Page Field" mapping type

In PeopleBooks it refers to a Page Field mapping type whene mapping fields from the component to it's related content.
Is this a misprint in PeopleBooks, did this feature not make it into 8.50.09 or is this option only available under certain circumstances.
I'm trying to pass a non key field from level 0 to the rel content url.
Thanks to anyone who can shed some light on this.
Graham

Hi Jim
Thanks for the reply.
It appears that you can't select the "Page Field" mapping type unless you have the related content specified by PAGE ratehr than component.
PBOOKS states Page Field: use when you want to map the service parameter to any level 0 page field.
In the component buffer fields in level 0 could be any page. I was hoping to pass ANY level 0 field through to the Rel Content URL for any page in this component.
Kind regards
Graham

How many key fields can we maintained in dso or ods

HI
pls let me know how many key fields can we maintained in DSO or ODS.
Thanks and Regards.
ASIM.

Hi,
Key fields can only be 16 you cannot exceed this. but if you have more key fields, you can combine fields using a routine for a key field
Max Data Fields - 749 data fields can be added in a DSO.
Regards,
Marasa.

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

Adding new field in ME21N items level NO ADDITIONAL TAB or SUBSCREEN

Hello Gurus!!
I have a requirement where I am just trying to add a new field ZZ*** at Item level in ME21N (and no new tabs please)
I got the modification key and now wat i see is that in screen 1211 SAP has some field mappings with metadata.
Refer to Include LMEMFSF0T.
Can you please help me how sud i proceed or wat can be an alternate way out to solve.
regards,
Prasenjit Singh Bist

Hi,
     Another way of doing the same is to use screen-exits for the transaction. You can use the standard enhancement MM06E005 in SMOD for the Purchasing related custom fields. You can add the fields in the screens 0101, 0111 of program SAPLXM06 to get the fields in the tab 'Customer Data' at header level and item level for ME* transactions.
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
                    are the function modules where u need to do the coding.
and the fields u have added need to be included in the includes
CI_EKKODB
CI_EKPODB
of EKKO and EKPO for header level and item level respectively.
Regards,
Vishnu Priya
Message was edited by:
        Vishnu priya
Message was edited by:
        Vishnu priya

Field Mapping of CREMAS05 IDoc..!!

Hi Gurs ,
Iam trying to map the following fields in CREMAS05 Basic IDoc Type but unable to find the correct mapping field segments in the IDoc.
Fields need to be mapped are:
1.Building Code
2. Pan No
Can anyone suggest me which segment and field i need to use for the above fields mapping..? or if i extended my idoc with some custom table how i will map into Standard field .
Thanks .
Hemant Gulati(A1)

Hi Jurgen ,
Thanks for Reply .
Vendor Master Idoc CREMAS05
i have extended my idoc with some zfields . in zfield i have Building code and Pan no
like zbuild and zpanno i need to map these in ADDR1_DATA-BUILDING and J_1IMOVEND-J_1IPANNO respectively .
Thanks & Regards
Hemant Gulati(A1)

Field mapping and value mapping - Basic

Hi,
Assuming I have a repository containing a main table with 3 fields
1)Product
2)Description
3)Manufacturer (lookup field)
When i map the source file to the destination repository
1) i map fields product and description of the source file and destination repository.
2) map the manufacturer field between the source file and destination repository.
3)Value map the contents of the manufacturer field between the source and destination.
If i have a source file like this.
Product                                         Description                                Manufacturer
a                                                         a                                              Hindustan lever
b                                                         b                                              Hindustan lever
a                                                         a                                              P&G
b                                                         b                                              P&G
Since i have made the manufacturer field a lookup field, it can hold the lookup values Hindustan lever and P&G.
what happens to prduct ? i have made only a field mapping. Will the values a & b be stored in the destination repository this way?
Is a value mapping required for product as well to hold both the values?
Please help
Thanks,
Vignesh

Hi Vignesh,
You do not have to value map it. Import managerwill automatically assign both the values to product a and b. Basically it is set in the configuration options of the import manager. There is a setting "merge source records based on matching field". If that option is set to yes, both the values will be assigned to product a and b respectively.
Best Regards,
Dheeraj

EDI_DC40 empty in Field mapping

Hi Friends,
in LSMW when I come to the field mapping step I find the structure EDI_DC40 empty.
I have entered Information for Partner types, Partner Number and Ports.
Normally when I come to the step field mapping the structure EDI_DC40 is allready filed with values.
Do I have to set defaults somewhere?
Many tahnks.
RG. Jimbob

Hello,
While processing the Idoc, it is required to maintain the Control Record Information for the IDoc.
So, please maintain data for the Control Record such as Partner Information, Port Information etc.
Thanks and Regards,
Venkat Phani Prasad Konduri

Query : Custom field at line item level in SRM 7.0 .

I was going through a document which instructs on how to add a custom field at line item level in SRM 7.0.
I found this code :
CALL FUNCTION 'BBP_PD_SC_GETDETAIL'
EXPORTING
I_GUID = IV_DOC_GUID
I_WITH_ITEMDATA = 'X'
TABLES
E_ITEM = LT_ITEM
E_MESSAGES = LT_MESSAGES
E_STATUS = LT_STATUS. .
LOOP AT LT_STATUS INTO WA_STATUS.
IF WA_STATUS-STAT EQ 'I1015' AND WA_STATUS-INACT IS INITIAL.
LV_STATUS_APPROVE = 'X'.
ENDIF.
ENDLOOP.
I wanted to know what is 'I1015' and what is its significance .
please advise .
Ambar

HI
This speaks about the status of the Cart. This means that the Status of the Cart is AWAITING APPROVAL...I dont know which document you have gone through but procedure for adding a Custom Field in SRM 7.0 is:
1. Create a Custom field in the Database in SRM. Preferrably add the field in an include and extend thta include to the table in SE11.
2. Go to Portal Login of SRM and right click the part of the screen where you want to add the custom field. Click on More Field Help. The popup will give you the name of WebDynpro Applicaiton which controls that area.
3. Login to SRM via GUI and display the webdynpro application using SE80. Enhance the Webdynpro application.
4. Add the custom field to the Context of the WebDynpro Application View. You will be selecting the field from the database table while adding the custom field to the context
5. Add the field at the specified place in Layout Tab of the WebDynpro View,
6. Create a binding between the Layout Field and the Context
7. Activate the changes.... you will see the field in Portal login of SRM....
For more details , refer to the Webdynpro help of the application...
Regards
Virender Singh

Regarding 0txtmd field mapping in Transfomration level dso to cube

Similar Messages

Maybe you are looking for