Regarding access key

hi
I have a Question regarding Access key.actually I wanted to
whenever we change different objects its asking different
access key...say  frankly
for Mara its asking different acess key then
I observed Abap'rs are trying to insert a object PatternD
so in this step its again asking Access key.so my doubt is
do I need to request SAP portal for another acess ..plz do
revert if any one knows the answer
Thank you

Hi
Yes, access key is required for editing object, and for different objects it will ask different access keys. So , you need to apply for access key at marketplace, each time.
Hope this helps you.
Regards
Rahul

Similar Messages

  • Regarding access key for modify predifined fm in SAP IDES System

    hai to all,
    How can i find
    access key for modify predifined fm in SAP IDES System
    i have sap 4.7 dump(IDES)
    please give reply asap.
    thanks in advance,
    regards,
    surya.

    Hi Chandran,
    Thank you for the reply,
    how can i access this site, its asking username password,
    i didn't have both of these and even i'm unable to register also.
    how can i access.
    please respond
    regards,
    surya.

  • Regarding the access key for an object

    HI all
    Please clarify me the doubt that an access key will be different for each and every object or one for all the objects.
    regs
    karna

    Hi karna,
    1. It will be different for all objects.
    2. In fact, access key will be different
        for each object,
       and that too, for each different installation number
       as well as each basis version number
    <b>3. In short, access key is dependent upon the combination of
    1. The object R3TR FUGR SFES    
    2. Sap Release (eg. 640)
    3. Installation Number</b>
    4. It means that the access key for one standard program
       (in our server),
       will not work in another server bcos the installation number will be different.
    regards,
    amit m.

  • Regarding oss access key

    hi experts
    while am opening the se38. it can ask the oss access key.
    i dont know where it is available? i searched in forum. but i cant grasp  the forum clearly. pls rectify it....
    regards
    surender

    Hi
    Go through the link given below :
    access key
    With Regards
    Nikunj Shah

  • Regarding SAP Access Key

    Hi Gurus,
         How can we  find out the access key details of a particular SAP installation.
    ( the installation is registered one)  . Please help me in this regard.
    Thank You in Advance,
    Vikram Krishna.

    Dear Vikram Krishna,
    If you are referring to Installation Number:
    Follow the menu path in SAP GUI System -> Status, Installation number under SAP System Data.
    Access Keys:
    https://websmp202.sap-ag.de/support under Keys and Requests (You would need OSS username and password)
    Regards,
    Naveen.

  • URGENT - HELP NEEDED WITH ECC 6.0 ACCESS KEY and USER SETUP

    Please help me with the two issues:
    1) In ECC 6.0, When I go to SE12 , table V-FAGL_ACTIVEC (New GL Activation) to make the table display and maintenance allowed, I am asked for the access key. What is the access key that I am supposed to put here. When I go to DEVACCESS table and put my username, I still dont get the access key.
    2) Also I need to know what should be maintained under SU01 to give a user all authorizations. I have SAP_ALL and SAP_NEW. Is there anyother profile need to be given here. Also do I need to give anything under roles tab in order for the user to have all accesses??

    OK I have TAR for this:
    TAR 4234076.996
    and related issue discussed in regards to 500 Internal Server Error described on Neverending frustration with JDeveloper
    with the TAR number
    TAR 4332393.995
    The latter has been demonstrated and confirmed to be a BUG at this point. For the future updates on this issue please refer to
    Neverending frustration with JDeveloper

  • Access key needed when creating a new database table with SE11

    Hi,
    I'm using SAP Testdrive (evaluation) on linux in order to learn a bit about ABAP programming. I want to create a new database table in the  dictionary to be used in my programs. I proceed in the following way:
    1) I run the SE11 transaction
    2) At the first entry I write the name of the table to be created (in the Database Table field)
    3) I click on the create button.
    But then the system asks me an Access Key to register, where can I get this?
    Thanks in advance,
    Kind Regards,
    Dariyoosh

    Ok I found the answer to my question in another thread
    Developer Key
    Make sure that your program names starts with "Z" or "Y", otherwise the system will ask you to register the object because it thinks you are creating/changing in the SAP namespace.
    In fact this was my error, my table name didn't start with neither "Z" nor "Y".
    Kind Regards,
    Dariyoosh
    Edited by: dariyoosh on Nov 13, 2010 12:34 PM

  • ABAP Access Key for Table change mode MCVKUSR & MCVBAPUSR in SE11

    Dear All,
    I'm using SAP ECC6.0. I want to create a new database table in the dictionary to be used in my programs. I proceed in the following way:
    1.  I run the SE11 transaction
    2.  At the first entry I write the name of the table to be Change created ( Display mode Showing )
    3.  I click on the change button.
    4. It will ask for Access Key
    But then the system asks me an Access Key , where can I get this?
    I have SAP License Key.
    DB Table Name : MCVBAPUSR & MCVKUSR
    Please Let me know
    Thanks in advance,

    Dear ,
    I go to Service market Place site, from SSCR Tab then I have to select a object from the list is TABL.
    and enter the Particular Object & Table Name . Now I got it Access key for Particular Object.
    Thank you for your quick Response.
    Once again Thank u.
    Regards
    Thomas.T
    Edited by: thomas_raja on Jun 5, 2011 6:24 AM

  • "Access Key" to activate domain "P106_AMT11" in ABAP Dictionary

    Hello folks.
    I tried to activate domain "P106_AMT11" in ABAP Dictionary.
    But Netweaver requires "Access key".
    How can I obtain it?
    I've checked some threads on "access key".
    Some people wrote "ask Basis Consultant".
    But I'm not acquainted with any Basis Consultants.
    Could someone please help me to get an "access key"?

    Hello,
    Every S user id may not have the authorization to generate the object key. Its a task of "Basis administrator", they generally have the authorization to generate the object access key.
    If your S user ID has the necessary authorization, then
    Go to https://service.sap.com/sscr > Register Object
    You have to give the below information while doing the object registration.
    Basis Release = <select your release version>
    PgmID = R3TR
    Type = DOMA
    Object name = P106_AMT11
    - Select the correct installation # under the "select installation"
    Note - SSCR developer or object key depends on the installation, the correct installation no. of your system.
    You can follow the below note for more details.
    https://service.sap.com/sap/support/notes/40850
    Regards,
    Debasis.
    Edited by: Debasis Sahoo on Oct 15, 2008 3:12 PM

  • Access Keys in Oracle ADF

    Hi,
    We are converting existing forms application to Oracle ADF application. In one of the existing forms, if we click on F8 key it executes the query and populates the form with the default data.
    Is there any possibility to trap the F8 key and invoke the managed bean method on click of F8 key.
    Thanks and Regards,
    S R Prasad

    You can define access keys in ADF too.
    See: http://download.oracle.com/docs/cd/E15523_01/web.1111/b31973/ap_kbd.htm#BABFCCEB

  • Where do I get an Access Key to modificate?

    Hi all,
    I downloaded an installed a perfectly running Testdrive 2004s on my ubuntu x64.
    After playing around a while, I tried to change a SAP-Program.
    But all I get is a message, that I have to enter a key.
    I installed the correct (DEMOSYSTEM) license.
    After some searching the web I found, that in the windows Version, exists a user, called BCUSER. This User has a standard key for all Demosystems and is allowed to modificate all SAP-objects.
    Now in my System, this user doesn't exist.
    Where can I get the access key for my testdrive?
    I dont have access to the market Place (I just have a DEMOSYSTEM) and I dont want to buy something ...........
    THX in advance!!
    Markus Völker

    HI,
    so you can modify z-programs with user 'developer' so it's a developer user for you so your system does not contain BCUSER
    With developer user you can not modify standard SAP program. if you try to change the standard sap program it's asking for the access key.
    for changing standard SAP program  you need to register that ABAP object on service.sap.com and you get the access key for that object,
    without service.sap.com user password you can not register object and one more thing you can not register your system objects because you have DEMOSYSTEM license
    regards,
    kaushal

  • Access key requested when creating new program in abap editor

    I am trying to create a new program in sap netweaver 7.01 trial version. netweaver promts me for creating object confirmation but after that I get a register object dialog box requesting an access key on the demosystem installation. where can I find such a key.
    please note that I am not a SAP customer. Its a trial version of netweaver 7.01 on a stand alone pc. Furthemore I know that naming my programs starting with Z will bypass the object registration key.

    Hi ,
    when you are using the first time se38 it will ask developer access key 
    u will get that from the service market place 
    take the help of u r basis consultant 
    regards,

  • Access key for ABAP

    Hi all,
    I need to create program of ABAP. It need access key for creating. How to get access key?
    Please advice,
    Duypm

    Hi Duypm,
    You have to register the user as developer.
    Login to the service market place            service.sap.com
    Keys & Requests -> SSCR keys ->Register Developer-> give the user id and from below select the installation number and click on register you will get the key.
    Use that key when prompted in sap.
    Regards
    Ashok Dalai

  • Adding custom fields to VA01 additional data tab without access key

    I have to add custom fields at item level in transaction VA01/VA02.
    Is  access key required to add fields to additional data screen i.e 8459 ?
    Is there any way to do this without using access key ?

    Hi ,
    Try for any User Exit or BADI available for the tcodes.
    Here are exits for VA01 and VA02.
    Exit Name           Description
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    Regards,
    Lakshman.

  • Azure Sync not saving access key in web portal

    Azure Sync not saving access key in web portal.
    You generate a new key, then press Ok and the key cannot be used and does not display again.
    Could someone please have a look at this?

    Hello,
    After generate a new key on the Manage Access key page, you can click the clipboard symbol to copy the key to your clipboard, and then paste the key from your clipboard on the SQL Data Sync Client Agent.
    Reference:http://msdn.microsoft.com/en-us/library/windowsazure/jj823137.aspx
    If I have any misunderstadning, please post more details information or a screen shot about the issue.
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

Maybe you are looking for