Regarding Activation of Datasource error

We have replicated datasource from R3 source system and while trying to activate it was posting error
of while activation of transfer structure with conversion exits., We are using 7.0 datasource only.
We checked at RSA3 of datasource and data is coming successfully., we tried with program transferstruc activate program
and rsds-datsource program but couldnt able to get rid of error.
Can you please help me to resolve the issue of what to be done for activation of

error while activation of datsource: Generation of conversion exits and PSA update...
                                                           Error when creating transfer structure /BIC/CCGNZP31_MM01_DS in source system Z370_110
                                                             Error when activating DataSource ZP31_MM01_DS                  Z370_110
                           These are the above errors mentioned while activating the datasource in 7.0.

Similar Messages

Activation of datasource :Error modified version

Hi All , Change icon is greyed out is there any program that i can run to activate the real estate datasource. or what is the other way to fix it
1. i activated the datasource in rsa5
2. it comes in rsa6
3. then in bi 7.0 i replicate the datasource but it shows modified version and change and activate button is greyed out.
please help me asap since its a BMW first deliverable and all my datasoources are in modified version. Kindly help
thanks
Soniya Kapoor

Hi, I've seen this problem before. I deleted the datasource in BW and then replicated again.
Regards
Dave

Active BC DataSource Error: RSA5, R8371

Hello friends,
Platform: BI 7.0 ECC6 and BC703
Error info: DataSource 0HE_SLC_MBK_1; switch to package PMIQBW_E is off Message no. R8371
Operation: When Active the Business Content DataSource Higher Education & Research (Technical name: 0IS_HER ) in R3 via RSA5, I got this error message.
Thanks
Jonas

Hi Jonas,
Try to follow steps in the below document
Link:https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23
Cheers,
Tanish.

Error while activating a datasource

Hi All,
We have created a generic datasource. While we are activating the datasource, its throwing up a message saying: "Error in database while accessing a table." And also "Generation of conversion exit and PSA update". Please advice.
Thanks & Regards,
Sanjeev

Hi All,
There are issues still pending in our report design. Besides the above issue, we have also got another issue related to Absenteeism column.
Example:
The report needs to show the absenteeism column on a monthly basis. If an employee goes on a unscheduled leave for 10 days which are scattered in two months (Ex: he takes leave from 28th April till 7th May), then if the report is executed for April, for that Employee, it should show only 3 days, i.e. 28th, 29th & 30th. The remaining days have to be displayed in the Absenteeism column of May report, i.e 1st, 2nd...till 7th.
There is one record whenever an employee goes on an unscheduled Leave.
Emp ID             From Date            To Date                        No of Days
111         28/04/2011          07/05/2011         10
Hence this record has to be split into two, based on the no. of days the employee has gone on an unscheduled leave in both the months like below.
April
Emp ID             From Date            To Date                        No of Days
111         28/04/2011          30/04/2011         3
May
Emp ID             From Date            To Date                        No of Days
111         01/05/2011          07/05/2011         7
Any inputs are most welcome.
Regards,
Sanjeev.

Error while activating the datasource during migration

Hi Guys,
When we were trying to migrate the datasources from 3.x to BI 7.0, we are encountering an error with the activation of the datasource. The datasource itself has been migrated but the ativation log gives and error
Error in activating the datasourc----RSO404
Has anyone encountered this issue? Your input is highly appreciated.
Regards,
Doniv

Voodi,
Thanks for the response but the note talks about deletion of the DTP causing the errors. Moreover we are already on SP 13. Any other ideas?
Doniv

ERROR WHILE ACTIVATING THE DATASOURCE

Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

Hi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy

Error while activating BC datasources

Hi guys,
I am getting this error while activating BC datasources...it is only with my login, rest of the users can work well.
Error:
DataSource 0BP_ACTITLE_TEXT; switch to package BUPA_CENTRAL_DATA_BW is off
this happened with all DS in the BC, the problem occured because while activating initially my connection got disconnected and then this problem started.....
how do i rectify this? any help would be highly appreciated.....

make sure that the server from which ur data source gets the values are also logged on

Gwtting error while activation of datasource

Hi
i am using demo version . while activating my datasource ( flat file and , r/3 datasources)
i am getting this error. please let me know this error will be system related or we can solve our self also
function module SDF/AL_MAP_TRANSID_LOGH DOENT NOT EXIST
please let me know solution

Implement note 1114719. Not sure though, whether this also fixes your other issues mentioned

No active writeable datasource found for user creation, check your Persiste

HI SAP Guru's
Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
You are not authorized to access this application; contact your system administrator
and when I am going to create user in identity management I am getting below error
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I have searched all related treads in SDN but no success
Please help.
Thanks & Regards
Vinay Patel

Dear all,
I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
1. Go to portal http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
- select configuration
- folder "sap system based in abap"
- do the conection test
If the test fails, log on in client 001 and change user SAPJSF:
- assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
- you can change the password too
STOP/START ABAP+JAVA
Go again to the portal above and test connection again. The tests should now be OK.
2. Go to portal http://<portal>/irj
- Log on with administrator user
Now you should be able to create an user.

Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)

Hi All,
I could see following error event in all client computers , Could you please some one help me on this ?
Log Name:      Application
Source:
Microsoft-Windows-CertificateServicesClient-CredentialRoaming
Event ID:      1005
Level:         Error
Description: Certificate Services Client: Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)
Regards, Srinivasu.Muchcherla

If you are not using certificates and Credential Roaming for clients then simply ignore the error message.
If you are using certificates then you are getting access denied message when Credential Roaming is trying to write to your AD. More details about Credential Roaming here: http://blogs.technet.com/b/askds/archive/2009/01/06/certs-on-wheels-understanding-credential-roaming.aspx
http://blogs.technet.com/b/instan/archive/2009/05/26/considerations-for-implementing-credential-roaming.aspx
This is probably related to the fact that your schema version not 44 or higher: https://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a6e61-68c4-47d3-ae79-8296cb3be315/certificateservicesclientcredentialroaming-errors?forum=winserverGP
Active Directory
ObjectVersion
Windows 2000
13
Windows 2003
30
Windows 2003 R2
31
Windows 2008
44
Windows 2008 R2
47
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

2LIS_04_P_MATNR - Prob in activating the Datasource in R/3

Hello,
I am trying to activate datasource 2LIS_04_P_MATNR in r/3 in Tcode : rsa6/rsa5 and I am getting a warning that says
The even-numbered length of the DEC field I_DLZ_EX can lead to problems
I serached and found that note : 641744 is applicable.
The solution in the note says that there are 3 options to rectify this error as below:
If the field is not manipulated in the customer exit or elsewhere, no processing is required.
If you change the field, the following possible solutions are available:
You can make sure that the number of the characters does not increase after the manipulation.
If you can change the extract structure of the DataSource without affecting other scenarios (for example, if it was generated in transaction RSO2), you can increase the length of the DEC field (or CURR, QUAN) there to the next odd character (in the example above: from DEC 4 on DEC 5).
If neither of these solutions are possible, you can use a customer append that contains a relevant DEC field (or CURR, QUAN) with the next highest odd length. This can be used for the result of the calculations. This means that you do not have to manipulate the previous field.
I am opting the 3rd option i.e. to use an append structure with a field QUAN(in my case) that has next highest odd length
I am using the field BDMNG(length 13) from table RESB. The feild mentioned in the warning have length 12.
The problem is still occuring.
Am I able to understand the note correctly or am I missing something?
Can anyone help here?

Thanks Deva. I ignored the warning and went ahead with the enhancement.
After the activation of datasource I deleted and filled the setup tables, but the NPRT log showed 0 records.
Then after reading few threads at SCN I came to a conculsion that my setup table is refering to view CAUFV which does not contain data for order category AUTYP 10(PP Production Order) and therefore the data extracted is 0.
There was a thread mentioning the same problem that said (steps to fill the setup tables for 2LIS_04_PECOMP(Repetitive manufacturing Component view)) that the solution was to run OLIFBW Tcode after completing OLI4BW setup. So i did the same. But still my NPRT log still shows 0 records.
Also I checked AUFK table. It does not contain any data for AUTYP 10.
Please advise what should be the correct way to solve this.

HT201407 iPhone 4 activation and restore errors. Tried everything and the phone still won't work

Woke up this morning and looked at my phone. Found an error message saying "iPhone cannot make or recieve calls, please restore through iTunes". So before restoring it I checked the support website to see if there was anything else I could do before I had no other choice than to restore the phone. Followed everything, found the phone still wouldn't work or recieve signal. I restored the phone and now it wouldn't activate, so called Apple and explained to them. Tried everything I was told, (Call my network, original network provider of phone, restore again, try recovery mode, activating with a different SIM card, absolutely everything) and still the phone wont activate. Apple have bent over backwards for me to try solve this but have had no luck, so if anyone else has experienced this and had any luck fixing it can you please share any info with me as I'm now effectively stuck in a contract without a phone or an option to renew the phone or one to put my SIM card into. iTunes also thinks 6.1.3 is the latest software but I have seen users with 6.1.4
The phone is an iPhone 4 16GB originally locked to Orange UK but has been working fine with a T-mobile UK SIM.
I've spent a couple of hours looking on the Internet and had no luck at all so any replies would be greatly appreciated.
Thanks.

Are there any other errors that you are receiving? The exact error helps. You say it was locked to Orange, did they unlock the device? Or did you do something else to make the device work with the other SIM. There are a number of issues regarding activation, and many deal with trying to activate a device that has been locked to a carrier, hacked to work with another and then locked back when the device is updated. Would any of this pertain to you?

Activated all datasources by mistake

Hi all,
I have the following problem - while I was trying to activate in RSA5 an FI data source, by mistake (I didn't click on the Select the Subtree +/- Button) I Activated ALL datasources (around 1046) which were added in a request.
In order to solve this I compared the Development with the Production, and deleted all the Data sources which were not in Production, and also deleted all the objects from the request.
Everything seemed ok. But, now that i did the replication of Data Sources from that system, in the BI system, I encounter the following problem: no data source has "arrived", other than the ones already existing, but for the ones already there, it has added a modified version (by me).(status changed from active to modified)
How can I undo this? It does not bother me, but the next time someone does a change here, problems may occur.
Please help!!!
Thank you so much,
AD

Hi
Use the program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data sources.
now goto R3 system --> RSA6 check the data source which you want are active or not.
If not activate them and replicate them into BI system.
Regards,
Venkatesh

Configuration Manager 2012 SP1 Prerequisite Checker returns "Migration active source hierarchy" error

Hello,
I am getting "Migration active source hierarchy" error in the SCCM 2012 SP1 prerequisite checker on the CM 2012 primary site. The error says "There is an active hierarchy configuration for the migration. Please stop data gathering for each
source site in the source hierarchy." However, actually there is no migration source hierarchy configured and there are no migration jobs displayed in CM 2012 console. We used to configure this feature to migrate CM 2007 to current CM 2012 without service
pack two years ago and we have deleted these configurations.
In migmctrl.log, the following record is being generated every 60 minutes.
======================================================
Connection string = Data Source=xxxxx;Initial Catalog=xxxxx;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Encrypt=True;TrustServerCertificate=False;Application Name="Migration Manager".~~ $$<SMS_MIGRATION_MANAGER><04-07-2014
01:01:53.710+300><thread=6992 (0x1B50)>
Created new sqlConnection to xxxxx~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]: Start two step scheduling
for MIG_Job~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]:
Step 1. Query the schedule items that was running or requested to start immediately ...~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]:
Step 2. Query the first item in order of DateNextRun ...~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.819+300><thread=6992 (0x1B50)>
[Worker]:
No item found. Sleep until the next event.~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[Worker]: End two step scheduling
for MIG_Job~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[MigMCtrl]: the workitem queue is full!~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
======================================================
I am not really sure where to look into in this case. I would appreciate any advice.

Hi,
Could you please upload the full migmctrl.log?
How about specifying a source hierarchy with the same name and password of the hierarchy before in the console, then click Clean Up Migration Data?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

User gets Active X Runtime error 429 while running 10.1.3.4.1 Build 130

Hello all,
I have a user running BI Publisher Desktop 10.1.3.4.1 Build 130 as an addon in Word 2010. He has had multiple issues with this program in the past, one of which even forced us to reinstall his machine to resolve. He is on a clean build of Windows XP with all Microsoft updates applied for the OS and Office.
Initially he called because he was getting a "The macro cannot be found or has been disabled because of your macro security settings" error, even though all of his macros were enabled. I found a post on the forums here telling me to run C:\Documents and Settings>del /S /A:H /A:-H *.EXD which resolved the issue. This is the post: Re: Need Help Iam getting error when i try to open my RTF file
After doing this he went into Word 2010, clicked on add-ons, data, and load xml. He has a few files he loads up, and eventually gets a Active X Runtime error 429. I can see .net is trying to load in the background when the error is presented.
I found another post here that sent me out to this site: http://obipro.blogspot.com/2012/06/setting-up-obiee-publisher.html On this site, error 429 is listed. The recommended fix is to "remove and reinstall dotnetfiles using setup.exe located at <C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\DotNetInstallFiles>" I found the setup.exe located in this path and ran it. .net isn't uninstalled by running this, but XMLPReportingTools4WordSetup asks if it would like to be repaired or uninstalled. I tried both, and reinstalled it. Same error. I tried uninstalling .net 3.5 and reinstalling it, same error.
Does anyone know how to fix Active X Runtime error 429?

Man Christian!
1000 Thanks for your tip. I run into same issue on W2K3 with 10.1.3.4 MLR#4 (so far last MR allowed for AIA apps).
I had the orabepl.ear file of the size as was mentioned earlier: 2.530.260 in the bpel\system and other one on the j2ee\ocj4_soa\applications folder.
Copying did not help.
I had to perform following steps from the <MLR#4>/custom/scripts/post.bat file which takes the file from the bpel\system,
ADDS some another .jars in it and ONLY THEN move it to the j2ee\...\applications folder:
copy %ORACLE_HOME%\bpel\system\j2ee\orabpel.ear %ORACLE_HOME%\bpel\system\services\lib\orabpel.ear
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\oc4j_ejb_services.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_services.jar
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\ejb_ob_engine_oc4j.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_ob_engine.jar
cd %ORACLE_HOME%\bpel\system\services\lib
%ORACLE_HOME%\jdk\bin\jar -uvf orabpel.ear ejb_services.jar ejb_ob_engine.jar
After doing manually these steps the orabpel.ear in j2ee\...\applications has got the size: 2.798.840 which was bigger as right after patch application.
Then I deleted the orabpel folder from the j2ee\...\aplication-deployments
started the j2ee containe (it was named: oc4_soa ) and the BPEL Console started live well as before in 10.1.3.3
As I did verify from other files The rest of steps from the post.bat file seems did well, only this part was not executed.
With Best Regards,
Alexey

Regarding Activation of Datasource error

Similar Messages

Maybe you are looking for