Regarding addon  for 2007b pl0 Vs addon  for 2007b pl8

hello sap experts
is their any relation for Addon  and patch level why am i asking this question is i have addons for 2007b and pl0 but these addons are not working for  2007b and pl8 and if not pls do provide the addons for patch level 8
thanks in advance
regards
Jenny

Hi!
Check this thread !
Issue on MS Outlook Integration Initialization

Similar Messages

  • Error while 'Crystal Report for Sap Business One' addon started

    Hi,
    I have try to install Crystal Report for Sap Business One (Addon Versione number 2.0.0.7).
    The installatione finish succesfully, but when I started the addOn i retrieve this errore message: External Connection to the dataBase failed. Sap Crystal Addon may not function properly. Please re-run the account setup with superuser login.
    I'm logged in Sap with manager (super user), so maybe I have forgot some step in the installation?
    I have see the Demo in the Channel Partner Portal, I have note that I have to isntall the CR_Runtime_12_0, but I don't find it, I don't know where I can download this file. I have just installed SapCrystalSetup.exe and registered the Addon like a normal Sap B1 addon.
    Where is the error??
    Regards
    Marco

    You must configure in each cliente Pc the connection with the DATABASE.
    You must Know the Database Super User (In SQL Server usually sa, and its password, the standard form SAP Business One is SAPB1Admin)
    In Administration > Crystal Reports Administration > Account Setup
    The CR_Runtime_12_0 is only necesary to view reports, but isn't necesary to start de addon.

  • Quick question regarding best practice and dedicating NIC's for traffic seperation.

    Hi all,
    I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc.  I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this.  What I mean is ...
    -     Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
    -    Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
    During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch?  Is there some sort of ranking order of priority /importance?  FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

    I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen?  Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc 

  • Query regarding the fields details in particular form for all the users in

    Dear All,
                  I have one query regarding the fields details in particular form for all the users in company.
    Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce   4.Total   5. Location.
    While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including  above 4 fieds .
    Now my question is how to set the User choice fiels for the particular form that are common to all users.
    Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........

    You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
    This is a manual job and you have do do it with every user login.
    Alternately, you can try out this link that explains
    [How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html]

  • Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

    Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
    I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
    Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
    Please please post here.
    Thanks
    Tiaan

    Greetings fcit@!A,
    After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
    Why can’t I select None when I edit my Apple ID payment information? - Apple Support
    Thanks for using Apple Support Communities.
    Take care,
    Mario

  • Advice for a PC configuration upgrade for Adobe Creative Cloud, please?

    Hi everyone,
    For the moment I have an old PC (bought in April 2008) and maybe if you eventually help me I could have a more powerful machine. I am asking you five questions at then end of this post, so if someone can reply it would help me and be greatful.
    Here is the resume of the configuration of my desktop
    --------[ Operating System ]---------------------------------------------------------------------------------------- ----
        Operating System Properties:
          OS Name                                           Microsoft Windows 8.1 Professional
          OS Language                                       English (United Kingdom)
          OS Installer Language                             English (United Kingdom)
          OS Kernel Type                                    Multiprocessor Free (64-bit)
          OS Version                                        6.3.9600.16452 (Win8.1 RTM)
          OS Service Pack                                   -
          OS Root                                           C:\WINDOWS
          Components Version:
          Common Controls                                   6.16
          Windows Mail                                      6.3.9600.16384 (winblue_rtm.130821-1623)
          Windows Media Player                              12.0.9600.16384 (winblue_rtm.130821-1623)
          Windows Messenger                                 -
          MSN Messenger                                     -
          Internet Information Services (IIS)               -
          .NET Framework                                    4.0.30319.33440 built by: FX45W81RTMREL
          Novell Client                                     -
          DirectX                                           DirectX 11.0
          OpenGL                                            6.3.9600.16384 (winblue_rtm.130821-1623)
          ASPI                                              -
        Operating System Features:
          Debug Version                                     No
          DBCS Version                                      No
          Domain Controller                                 No
          Security Present                                  No
          Network Present                                   Yes
          Remote Session                                    No
          Safe Mode                                         No
          Slow Processor                                    No
          Terminal Services                                 Yes
    --------[ Motherboard ]---------------------------------------------------------------------------------------- ---------
        Motherboard Properties:
          Motherboard ID                                    06/19/2009-P35-ICH9-6A89OG0PC-00
          Motherboard Name                                  Gigabyte GA-EP35-DS4
        Front Side Bus Properties:
          Bus Type                                          Intel AGTL+
          Bus Width                                         64-bit
          Real Clock                                        333 MHz (QDR)
          Effective Clock                                   1333 MHz
          Bandwidth                                         10667 MB/s
        Memory Bus Properties:
          Bus Type                                          Dual DDR2 SDRAM
          Bus Width                                         128-bit
          DRAM:FSB Ratio                                    12:10
          Real Clock                                        400 MHz (DDR)
          Effective Clock                                   800 MHz
          Bandwidth                                         12800 MB/s
        Chipset Bus Properties:
          Bus Type                                          Intel Direct Media Interface
        Motherboard Physical Info:
          CPU Sockets/Slots                                 1 LGA775
          Expansion Slots                                   2 PCI, 3 PCI-E x1, 2 PCI-E x16
          RAM Slots                                         4 DDR2 DIMM
          Integrated Devices                                Audio, Gigabit LAN, IEEE-1394
          Form Factor                                       ATX
          Motherboard Size                                  240 mm x 300 mm
          Motherboard Chipset                               P35
          Extra Features                                    Dynamic Energy Saver, SATA-II, RAID
        Motherboard Manufacturer:
          Company Name                                      Gigabyte Technology Co., Ltd.
    --------[ CPU ]---------------------------------------------------------------------------------------- -----------------
        CPU Properties:
          CPU Type                                          DualCore Intel Core 2 Duo E8400, 3000 MHz (9 x 333)
          CPU Alias                                         Wolfdale
          CPU Stepping                                      C0
          Instruction Set                                   x86, x86-64, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1
          Original Clock                                    3000 MHz
          Min / Max CPU Multiplier                          6x / 9x
          Engineering Sample                                No
          L1 Code Cache                                     32 KB per core
          L1 Data Cache                                     32 KB per core
          L2 Cache                                          6 MB  (On-Die, ECC, ASC, Full-Speed)
        CPU Physical Info:
          Package Type                                      775 Contact FC-LGA8
          Package Size                                      37.5 mm x 37.5 mm
          Transistors                                       410 million
          Process Technology                                45 nm, CMOS, Cu, High-K + Metal Gate
          Die Size                                          107 mm2
          Core Voltage                                      1.113 - 1.225 V
          I/O Voltage                                       1.113 - 1.225 V
          Typical Power                                     65 W @ 3.00 GHz
          Maximum Power                                     91.9 W @ 3.00 GHz
        CPU Manufacturer:
          Company Name                                      Intel Corporation
          Product Information                               http://ark.intel.com/search.aspx?q=Intel Core 2 Duo E8400
        Multi CPU:
          Motherboard ID                                    OEM00000 PROD00000000
          CPU #1                                            Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 3000 MHz
          CPU #2                                            Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 3000 MHz
        CPU Utilization:
          CPU #1 / Core #1                                  0 %
          CPU #1 / Core #2                                  0 %
    --------[ Windows Video ]---------------------------------------------------------------------------------------- -------
      [ NVIDIA Quadro 2000 ]
        Video Adapter Properties:
          Device Description                                NVIDIA Quadro 2000
          Adapter String                                    Quadro 2000
          BIOS String                                       Version 70.6.41.0.6
          Chip Type                                         Quadro 2000
          DAC Type                                          Integrated RAMDAC
          Driver Date                                       29/09/2013
          Driver Version                                    9.18.13.2739 - nVIDIA ForceWare 327.39
          Driver Provider                                   NVIDIA
          Memory Size                                       1 GB
        Installed Drivers:
          nvd3dumx                                          9.18.13.2739
          nvwgf2umx                                         9.18.13.2739
          nvwgf2umx                                         9.18.13.2739
          nvd3dum                                           9.18.13.2739 - nVIDIA ForceWare 327.39
          nvwgf2um                                          9.18.13.2739
          nvwgf2um                                          9.18.13.2739
        Video Adapter Manufacturer:
          Company Name                                      NVIDIA Corporation
      [ NVIDIA Quadro 2000 ]
        Video Adapter Properties:
          Device Description                                NVIDIA Quadro 2000
          Adapter String                                    Quadro 2000
          BIOS String                                       Version 70.6.41.0.6
          Chip Type                                         Quadro 2000
          DAC Type                                          Integrated RAMDAC
          Driver Date                                       29/09/2013
          Driver Version                                    9.18.13.2739 - nVIDIA ForceWare 327.39
          Driver Provider                                   NVIDIA
          Memory Size                                       1 GB
        Installed Drivers:
          nvd3dumx                                          9.18.13.2739
          nvwgf2umx                                         9.18.13.2739
          nvwgf2umx                                         9.18.13.2739
          nvd3dum                                           9.18.13.2739 - nVIDIA ForceWare 327.39
          nvwgf2um                                          9.18.13.2739
          nvwgf2um                                          9.18.13.2739
        Video Adapter Manufacturer:
          Company Name                                      NVIDIA Corporation
          Product Information                               http://www.nvidia.com/page/products.html
    --------[ Physical Drives ]---------------------------------------------------------------------------------------- -----
    HDDs :
    . 2 HDDs 2 x 1 TB SATA-II RAID 0 for video editing, the OS and software
    . 1 HDD 2 TB SATA-II for backups
    . 1 HDD 2 TB SATA-III for backups off site + Archive
      [ Drive #1 - Intel   Raid 0 Volume (1863 GB) ]
        #1 (Active)      NTFS                                                             1 MB      350 MB
        #2               NTFS             C:                                            351 MB  1907380 MB
      [ Drive #2 - WDC WD20EZRX-00D8PB0 (1863 GB) ]
        #1               MS Reserved                                                      0 MB      128 MB
        #2               Basic Data       G: (Archives)                                 129 MB  1907600 MB
      [ Drive #3 - Hitachi HDS722020ALA330 (1863 GB) ]
        #1               NTFS             D: (Backup)                                     1 MB  1907727 MB
    --------[ Memory ]---------------------------------------------------------------------------------------- --------------
        Physical Memory:
          Total                                             8190 MB
          Used                                              3334 MB
          Free                                              4856 MB
          Utilization                                       41 %
        Swap Space:
          Total                                             9470 MB
          Used                                              4131 MB
          Free                                              5340 MB
          Utilization                                       44 %
        Virtual Memory:
          Total                                             17661 MB
          Used                                              7465 MB
          Free                                              10196 MB
          Utilization                                       42 %
        Paging File:
          Paging File                                       C:\pagefile.sys
          Current Size                                      1280 MB
          Current / Peak Usage                              243 MB / 700 MB
          Utilization                                       19 %
        Physical Address Extension (PAE):
          Supported by Operating System                     Yes
          Supported by CPU                                  Yes
          Active                                            Yes
    --------[ SPD ]---------------------------------------------------------------------------------------- -----------------
      [ DIMM1: GeIL CL5-5-5  DDR2-800 ]
        Memory Module Properties:
          Module Name                                       GeIL CL5-5-5  DDR2-800
          Serial Number                                     None
          Manufacture Date                                  Week 44 / 2009
          Module Size                                       2 GB (2 ranks, 8 banks)
          Module Type                                       Unbuffered DIMM
          Memory Type                                       DDR2 SDRAM
          Memory Speed                                      DDR2-800 (400 MHz)
          Module Width                                      64 bit
          Module Voltage                                    SSTL 1.8
          Error Detection Method                            None
          Refresh Rate                                      Reduced (7.8 us), Self-Refresh
        Memory Timings:
          @ 400 MHz                                         5-5-5-15  (CL-RCD-RP-RAS) / 23-51-3-6-3-3  (RC-RFC-RRD-WR-WTR-RTP)
          @ 333 MHz                                         4-5-5-13  (CL-RCD-RP-RAS) / 20-43-3-5-3-3  (RC-RFC-RRD-WR-WTR-RTP)
          @ 266 MHz                                         3-4-4-10  (CL-RCD-RP-RAS) / 16-34-2-4-2-2  (RC-RFC-RRD-WR-WTR-RTP)
        Memory Module Features:
          Analysis Probe                                    Not Present
          FET Switch External                               Disabled
          Weak Driver                                       Supported
        Memory Module Manufacturer:
          Company Name                                      Golden Emperor International Ltd.
          Product Information                               http://www.geil.com.tw/products
      [ DIMM2: GeIL CL5-5-5DDR2800  5 ]
        Memory Module Properties:
          Module Name                                       GeIL CL5-5-5DDR2800  5
          Serial Number                                     00000005h (83886080)
          Module Size                                       2 GB (2 ranks, 8 banks)
          Module Type                                       Unbuffered DIMM
          Memory Type                                       DDR2 SDRAM
          Memory Speed                                      DDR2-800 (400 MHz)
          Module Width                                      64 bit
          Module Voltage                                    SSTL 1.8
          Error Detection Method                            None
          Refresh Rate                                      Reduced (7.8 us), Self-Refresh
        Memory Timings:
          @ 400 MHz                                         5-5-5-18  (CL-RCD-RP-RAS) / 23-51-3-6-3-3  (RC-RFC-RRD-WR-WTR-RTP)
          @ 266 MHz                                         4-4-4-12  (CL-RCD-RP-RAS) / 16-34-2-4-2-2  (RC-RFC-RRD-WR-WTR-RTP)
          @ 200 MHz                                         3-3-3-9  (CL-RCD-RP-RAS) / 12-26-2-3-2-2  (RC-RFC-RRD-WR-WTR-RTP)
        Memory Module Features:
          Analysis Probe                                    Not Present
          FET Switch External                               Disabled
          Weak Driver                                       Supported
        Memory Module Manufacturer:
          Company Name                                      Golden Emperor International Ltd.
          Product Information                               http://www.geil.com.tw/products
      [ DIMM3: GeIL CL5-5-5  DDR2-800 ]
        Memory Module Properties:
          Module Name                                       GeIL CL5-5-5  DDR2-800
          Serial Number                                     None
          Manufacture Date                                  Week 44 / 2009
          Module Size                                       2 GB (2 ranks, 8 banks)
          Module Type                                       Unbuffered DIMM
          Memory Type                                       DDR2 SDRAM
          Memory Speed                                      DDR2-800 (400 MHz)
          Module Width                                      64 bit
          Module Voltage                                    SSTL 1.8
          Error Detection Method                            None
          Refresh Rate                                      Reduced (7.8 us), Self-Refresh
        Memory Timings:
          @ 400 MHz                                         5-5-5-15  (CL-RCD-RP-RAS) / 23-51-3-6-3-3  (RC-RFC-RRD-WR-WTR-RTP)
          @ 333 MHz                                         4-5-5-13  (CL-RCD-RP-RAS) / 20-43-3-5-3-3  (RC-RFC-RRD-WR-WTR-RTP)
          @ 266 MHz                                         3-4-4-10  (CL-RCD-RP-RAS) / 16-34-2-4-2-2  (RC-RFC-RRD-WR-WTR-RTP)
        Memory Module Features:
          Analysis Probe                                    Not Present
          FET Switch External                               Disabled
          Weak Driver                                       Supported
        Memory Module Manufacturer:
          Company Name                                      Golden Emperor International Ltd.
          Product Information                               http://www.geil.com.tw/products
      [ DIMM4: GeIL CL5-5-5DDR2800  5 ]
        Memory Module Properties:
          Module Name                                       GeIL CL5-5-5DDR2800  5
          Serial Number                                     00000005h (83886080)
          Module Size                                       2 GB (2 ranks, 8 banks)
          Module Type                                       Unbuffered DIMM
          Memory Type                                       DDR2 SDRAM
          Memory Speed                                      DDR2-800 (400 MHz)
          Module Width                                      64 bit
          Module Voltage                                    SSTL 1.8
          Error Detection Method                            None
          Refresh Rate                                      Reduced (7.8 us), Self-Refresh
        Memory Timings:
          @ 400 MHz                                         5-5-5-18  (CL-RCD-RP-RAS) / 23-51-3-6-3-3  (RC-RFC-RRD-WR-WTR-RTP)
          @ 266 MHz                                         4-4-4-12  (CL-RCD-RP-RAS) / 16-34-2-4-2-2  (RC-RFC-RRD-WR-WTR-RTP)
          @ 200 MHz                                         3-3-3-9  (CL-RCD-RP-RAS) / 12-26-2-3-2-2  (RC-RFC-RRD-WR-WTR-RTP)
        Memory Module Features:
          Analysis Probe                                    Not Present
          FET Switch External                               Disabled
          Weak Driver                                       Supported
        Memory Module Manufacturer:
          Company Name                                      Golden Emperor International Ltd.
          Product Information                               http://www.geil.com.tw/products
    --------[ Windows Audio ]---------------------------------------------------------------------------------------- -------
        midi-out.0   0001 001B  Microsoft GS Wavetable Synth
        mixer.0      0001 FFFF  Speakers (5- High Definition Au
        mixer.1      0001 FFFF  Digital Audio (S/PDIF) (5- High
        mixer.2      0001 FFFF  W240D DVI (4- High Definition A
        mixer.5      0001 FFFF  Microphone (5- High Definition
        wave-in.0    0001 FFFF  Microphone (5- High Definition
        wave-in.1    0001 FFFF  Digital Audio (S/PDIF) (5- High
        wave-in.2    0001 FFFF  Line In (5- High Definition Aud
        wave-out.0   0001 FFFF  Speakers (5- High Definition Au
        wave-out.1   0001 FFFF  Digital Audio (S/PDIF) (5- High
        wave-out.2   0001 FFFF  W240D DVI (4- High Definition A
    --------[ PCI / PnP Audio ]---------------------------------------------------------------------------------------- -----
        nVIDIA HDMI/DP @ nVIDIA GF106 - High Definition Audio Controller                  PCI
        nVIDIA HDMI/DP @ nVIDIA GF106 - High Definition Audio Controller                  PCI
        nVIDIA HDMI/DP @ nVIDIA GF106 - High Definition Audio Controller                  PCI
        nVIDIA HDMI/DP @ nVIDIA GF106 - High Definition Audio Controller                  PCI
        Realtek ALC889A @ Intel 82801IB ICH9 - High Definition Audio Controller [A-2]     PCI
    --------[ HD Audio ]---------------------------------------------------------------------------------------- ------------
      [ Intel 82801IB ICH9 - High Definition Audio Controller [A-2] ]
        Device Properties:
          Device Description                                Intel 82801IB ICH9 - High Definition Audio Controller [A-2]
          Device Description (Windows)                      Contrôleur High Definition Audio
          Bus Type                                          PCI
          Bus / Device / Function                           0 / 27 / 0
          Device ID                                         8086-293E
          Subsystem ID                                      1458-A022
          Revision                                          02
          Hardware ID                                       PCI\VEN_8086&DEV_293E&SUBSYS_A0221458&REV_02
        Device Manufacturer:
          Company Name                                      Intel Corporation
          Product Information                               http://www.intel.com/products/chipsets
      [ Realtek ALC889A ]
        Device Properties:
          Device Description                                Realtek ALC889A
          Device Description (Windows)                      Périphérique High Definition Audio
          Device Type                                       Audio
          Bus Type                                          HDAUDIO
          Device ID                                         10EC-0885
          Subsystem ID                                      1458-A002
          Revision                                          1001
          Hardware ID                                       HDAUDIO\FUNC_01&VEN_10EC&DEV_0885&SUBSYS_1458A002&REV_1001
        Device Manufacturer:
          Company Name                                      Realtek Semiconductor Corp.
          Product Information                               http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PNid=8&PFid=14&Level=3&Conn= 2
      [ nVIDIA GF106 - High Definition Audio Controller ]
        Device Properties:
          Device Description                                nVIDIA GF106 - High Definition Audio Controller
          Device Description (Windows)                      Contrôleur High Definition Audio
          Bus Type                                          PCI
          Bus / Device / Function                           1 / 0 / 1
          Device ID                                         10DE-0BE9
          Subsystem ID                                      103C-084A
          Revision                                          A1
          Hardware ID                                       PCI\VEN_10DE&DEV_0BE9&SUBSYS_084A103C&REV_A1
        Device Manufacturer:
          Company Name                                      NVIDIA Corporation
      [ nVIDIA HDMI/DP ]
        Device Properties:
          Device Description                                nVIDIA HDMI/DP
          Device Description (Windows)                      Périphérique High Definition Audio
          Device Type                                       Audio
          Bus Type                                          HDAUDIO
          Device ID                                         10DE-0011
          Subsystem ID                                      10DE-0101
          Revision                                          1001
          Hardware ID                                       HDAUDIO\FUNC_01&VEN_10DE&DEV_0011&SUBSYS_10DE0101&REV_1001
        Device Manufacturer:
          Company Name                                      NVIDIA Corporation
      [ nVIDIA HDMI/DP ]
        Device Properties:
          Device Description                                nVIDIA HDMI/DP
          Device Description (Windows)                      Périphérique High Definition Audio
          Device Type                                       Audio
          Bus Type                                          HDAUDIO
          Device ID                                         10DE-0011
          Subsystem ID                                      10DE-0101
          Revision                                          1001
          Hardware ID                                       HDAUDIO\FUNC_01&VEN_10DE&DEV_0011&SUBSYS_10DE0101&REV_1001
        Device Manufacturer:
          Company Name                                      NVIDIA Corporation
      [ nVIDIA HDMI/DP ]
        Device Properties:
          Device Description                                nVIDIA HDMI/DP
          Device Description (Windows)                      Périphérique High Definition Audio
          Device Type                                       Audio
          Bus Type                                          HDAUDIO
          Device ID                                         10DE-0011
          Subsystem ID                                      10DE-0101
          Revision                                          1001
          Hardware ID                                       HDAUDIO\FUNC_01&VEN_10DE&DEV_0011&SUBSYS_10DE0101&REV_1001
        Device Manufacturer:
          Company Name                                      NVIDIA Corporation
      [ nVIDIA HDMI/DP ]
        Device Properties:
          Device Description                                nVIDIA HDMI/DP
          Device Description (Windows)                      Périphérique High Definition Audio
          Device Type                                       Audio
          Bus Type                                          HDAUDIO
          Device ID                                         10DE-0011
          Subsystem ID                                      10DE-0101
          Revision                                          1001
          Hardware ID                                       HDAUDIO\FUNC_01&VEN_10DE&DEV_0011&SUBSYS_10DE0101&REV_1001
        Device Manufacturer:
          Company Name                                      NVIDIA Corporation
    October 26th, 2012 Microsoft told me with "Microsoft Update Advisor" that I could upgraded my OS from Windows 7 Pro 64 bits to Windows 8 Pro 64 bits and after one year with another "Microsoft Upgrade Advisor" Microsoft told me again to upgrade my OS from Windows 8 Pro 64 bits to Windows 8.1 Pro 64 bits, but Gigabyte does not give the drivers on their website for my motherboard neither for Windows 8 and neither for Windows 8.1 and the system is however liable.
    If I believe Gigabyte I need to purchase a new motherboard and probably a new CPU and new RAM.
    1) Do you agree with Gigabyte or with Microsoft?
    2) If we believe Gigabyte, so can you tell me what king of CPU and motherboard to choose for video editing and video encoding, please?
    In the past, I had followed Adobe advices to use a Nvidia Quadro 2000 video card and HDDs in RAID 0 for video editing and video encoding.
    Moreover, Microsoft recommends to use a SSD for Windows 8.1.
    3) So, do you think I really need a SSD, with which capacity (256 or 512 GB ?) and which brand?
    4) A SSD for the OS and software and HDDs in RAID 0 for video editing?
    I edit HD (1600 x 1080 pixels) and I plan a budget between 450 and 650 $ for upgrading my PC.
    Maybe I can only buy one new motherboard for 200 $, keeping my CPU and my RAM and buy a SSD 480 GB for 333 $ (total 200 + 333 = 533 $).
    5) Do you agree with me for buying just only a motherboard and a SSD ?
    Thank you in advance if someone can help me.
    Otherwise my configuration seems to comply with http://www.adobe.com/products/creativecloud/tech-specs.html I have only a doubt for the sound.
    Best regards
    PS: the names of actual companies and products mentioned herein may be the trademarks of their respective owners.

    Hello Isidore,
    I can answer questions 3 and 4, as I have that sort of setup.
    3.) No, you don't really need an SSD, but I would certainly recommend that you buy one.  You'll notice a huge difference in the amount of time it takes to boot.  I bought the OCZ Vertex 3 (120GB) a while back, and it's very fast.  Whether or not you should get one just depends on whether the speed is worth it to you, but if I were you, I would.
    As for the size, that depends on exactly what you'll use it for.  See number 4 below.
    4.) Yes, that's my setup.  The SSD is my primary drive, and my HDD is for everything else.  Here's basically how I have everything setup:
    When I finish a day of shooting, I copy all my footage into a special folder (I named it "IMPORT" since I use it often) on my SSD.  I do this because the clips load much faster in Prelude and Premiere Pro.  Then, after I finish and export the project, I move all the original files onto my HDD.  I would still do this even I had a larger SSD, because it's always good to keep your primary drives clean.
    I also set the render and cache directories to those that I create on my HDD, because for longer projects, my SSD would fill up quickly, so that's why you may want to consider buying a larger SSD (even though 128GB would probably work just fine).
    I hope this helped a little!
    ~Josh

  • How to query opening balance for all customer or Vendor for an speci. date

    Hi,
    How to query opening balance for all customer or Vendor for an specific date?
    Example:
    put any date and query will show all customer/ Vendor  that date opening/current balance.
    Regards,
    Mizan

    Hi mizan700 ,
    Try this
    SELECT T0.[DocNum] As 'Doc No.', T0.[CardCode] As 'Customer Code',
    T0.[CardName] As 'Customer Name',(T0.[DocTotal]-T0.[PaidSys]) As 'O/S Balance'
    FROM OINV T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
    INNER JOIN OCRG T2 on T1.GroupCode = T2.GroupCode
    INNER JOIN INV1 T3 ON T0.DocEntry = T3.DocEntry
    WHERE T0.[DocStatus] ='O'
    AND
    (T0.[DocDate] >='[%0]' AND T0.[DocDate] <='[%1]')
    Regards:
    Balaji.S

  • GR/IR Account - one for internal vendor and another for external vendors

    Hi Experts,
    Can I have two GR/IR accounts - one for internal vendors and another for external vendors?  Please let me know.
    Thank you.
    with regards,
    Muthu Ganapathy.

    Hi Muthu,
    GR/IR accounts are not dependent on Vendors, they are dependent on Materials, to be precise on Plant/Valclass.
    You can post to 2 different GR/IR accounts if you set up 2 different classes. then it is possible.
    For setting up the same. Go to T.code : OBYC, Transaction : WRX.
    Here Setup different GR/IR accounts per val.class.
    Letme know if you need further info
    Thanks
    Kalyan

  • Dunning form F150- Telefon/fax/mail printing for 1 user and not for other

    Hello expert,
    This is regarding the printing of the dunning form using F150. 
    At first, using company code and account clerk (BUSAB), we retrieve the user id.  The program uses FM BAPI_USER_GET_DETAIL to get the address details of this user id.  The user name, telephone and fax adn email are printed in the dunning form (1st reminder, 2nd reminder and so on).  The problem here is , the address details are printed on the form for one user and not for the other user who is processing.  Any idea regarding this.  Do I need to give any user setting parameter in SU01 or is there any authoriztaion issue which is blocking this.  Awaiting reply,
    Cheers,
    Bala

    I'm having the same problem with Exchange 2003, I can get it to work with Entourage and on my iPhone, but it keeps rejecting my password on Mail.app. If I keep entering the password it starts to update with server, but it won't save the password. IMAP is on for my account which is how it works on iPhone.
    I'm starting to think it has something to do with Keychain Access or Mail.app and not so much Exchange Server. If anyone has found a solution please let me know,
    Thanks

  • Hi ! i have this new itunes account but when i wanna use this for apps he ask me for a card number but i don't have one .what i supposed to do ?

    Hi ! i have this new itunes account but when i wanna use this for apps he ask me for a card number but i don't have one .what i supposed to do ?

    Hi Mada7ina,
    If you are looking to set up an iTunes Store account without an associated credit card, you may find the following article helpful:
    Apple Support: Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
    http://support.apple.com/kb/ht2534
    Regards,
    - Brenden

  • Looking for HP Basic Driver only for hp 2610 all-in-one printer

    I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
    I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
    This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
    But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
    Regards
    Tech

    I just tried using Notepad as you suggested and had the same result.  Paper feeds in stops at proper place and error message "out of paper" 
    I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem. 
    I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner.  One for black and one for color.  The ink icons would change from completly full to just an outline as the amount of ink went down.  Currently the black ink icon is missing
    This is a very frustrating problem because the printer works great after doing a few steps to get around the problem.  The fact that the problem reoccurs any time anything is changed is the major problem
    Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs.  This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
    I want to thank you for all of your efforts.  Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer.  As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

  • Unit of measure conversion for CIN is not relevant for pricing

    During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
    Any light how to fix this issue?
    Thanks,
    Suseela. V

    Dear Suseela,
    You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
    Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
    Hope it will help. Thanks!
    Regards
    Indra

  • Drivers for HP Provilant ML110 G5 for Windows XP Professional

    Hi,
    How can i get the drivers for HP Provilant ML110 G5 for Windows XP Professional? I only found them for Windows Server 2003.
    Please help me.
    Thanks a lot!
    Regards
    Minh

    Hi:
    Your PC is not supported by HP for any operating system other than those listed on your PC' support and driver page:
    Install the chipset driver first, then graphics, then network.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3577715&...
    I would install as many of the 2003 server drivers as will work for your PC.
    For any that won't install, please click on each device in the device manager. Then click on the details tab.
    Post the top string of characters you see there.
    Those will ID the missing devices and I will try and find XP Pro drivers for them.
    Paul

  • Best practices for office 365 SHARED CALENDAR for whole school / organization

    hi
    we need guidance on best practice for setting up SHARED CALENDAR on Office365 exchange server for entire organization (school)of150 staff.
    Requirements
    + all staff should have read only / reviewer permissions on calendar
    +handful staff should have editor permissions on calendar
    + the calendar should synchronise custom categories and colors
    Current Solution
    at the moment we have found that a shared mailbox is the best solution because;
    - allusers can add the shared mailbox on outlook 2010as additional mailbox as readonly
    - all the categories & colors for the calendarare automatically synchronised because the color categories are stored within this mailbox.
    - you can edit calendar permissions in outlook to allow some users as "editor" of the calendar.Problem with Current Solution
    the problem however is that the users also need to access this...
    This topic first appeared in the Spiceworks Community

    Hi Aleksei,
    I think Inactive mailboxes in Exchange Online is the feature that you want. This feature makes it possible for you to preserve (store and archive) the contents of deleted mailboxes indefinitely.
    A mailbox becomes inactive when an In-Place Hold or a
    Litigation Hold is placed on the mailbox before the corresponding Office 365 user account is deleted.
    But I'm afraid that it might be impossible to "easily share certain folders or even whole mailbox with people in the company". As can been seen from below articles, this only allows administrators, compliance officers, or records managers
    to use the In-Place eDiscovery feature in Exchange Online to access and search the contents of an inactive mailbox:
    http://technet.microsoft.com/en-us/library/dn144876(v=exchg.150).aspx
    http://blogs.technet.com/b/exchange/archive/2013/03/21/preserve-mailbox-data-for-ediscovery-using-inactive-mailboxes-in-exchange-online.aspx
    Anyway, this is the forum to discuss questions and feedback for Microsoft Office client. For more details about your question, I would suggest you post in the dedicated forum of
    Exchange Online, where you can get more experienced responses:
    https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • People picker is not working for ie11 but working fine for other lower version

    i am using sharepoint 2010 and windows authentication
    recently i have updated my ie to ie11 and problem goes here.
    when i try to select from people picker, there are an unexpected error happened 
    however when i use other ie version, people picker work fine, what goes wrong?
    i have already added my system as trusted site
    if there any others thing i miss out?

    Hi,
    According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
    IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
    first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
    add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
    add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
    You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

Maybe you are looking for