Regarding Address Field while replicating data from ECC to SRM

Hi Forum,
I have a few qauestions regarding the mandatory fields that must be maintaned in ECC before replicating data to SRM..
1)Why is the address data (one we see in PA20 by selecting Addresses for the user) i.e. city and pincode required vefore replication.
2)Is there a way by which it can be defaulted so that we dont have to maintain it for each and every user?
Regards,
Anubhav

Hello,
Try if this helps.
SAP Note : Note 550055 - EBP/CRM: New integration for business partner : Section g:
Addresses: If addresses are required to generate correct business partners of the organizational unit role (in SRM, for example), the HRALX/OADRE switch is set to X (formerly: the BUPA/ADDR switch). If it is mandatory for each business partner of the organizational unit role to have an address, but the relevant organizational units do not always have a separate address, you can define a standard address. Create a separate business partner for storing the standard address. The number of this business partner, which is used as a container, is stored in the HRALX/OADBP switch (formerly BUPA/ADRBP).
Thanks
Ashutosh

Similar Messages

  • Errors while replicating Materials from ECC to SRM

    Hi All,
    I am trying to replicate materials from R/3 to SRM, in SMQ2 of SRM, the status of MATERIAL is still in yellow colour. when i checked in SMW01 tcode, the error is "Category for material group 013 does not exist" where as in R/3 also we dont have any material group as 013.
    All the Prod type & Prod category have been replicated into SRM from R/3.
    And no materials have copied in SRM.
    how to resolve this ?
    regds,
    CB
    Edited by: Channabasappa.K on Feb 17, 2011 10:30 AM

    Hi,
    DNL_CUST_PROD0 & DNL_CUST_PROD1 were in green colour now,
    DNL_CUST_BASIS3 is in yellow colour & i saw in some doc that DNL_CUST_BASIS3 is not reqd from SRM7.0 onwards.
    when i try to replicate MATERIAL, in SMQ2 i am getting status as SYSFAIL & after double clicking on that i got a pop up as "Error in Mapping (Details: transaction SMW01)"
    Upon checking in SMW01 i got the above errors as
    " Category for material group 013 does not exist
    Message no. COM_PRODUCT_API002
    Diagnosis
    If material groups are used in the SAP system, they must exist as categories in CRM/EBP before you import materials. When Customizing object DNL_CUST_PROD1 is imported, the material groups are imported automatically and created in the category hierarchy R3MATCLASS (material group).
    Procedure
    Check whether the material groups have been imported successfully and exist as categories.
    Proceed
    If necessary, import the Customizing object DNL_CUST_PROD1"
    Like this its showing 19 material groups and all these 19 mat groups were not present in ECC.
    Regds,
    CB

  • Modify vendor number when replicating vendor master data from ECC to SRM

    Hi,
    Is there a way  to modify vendor number(manually input vendor number e.g. from a file) when replicating vendor master data from ECC to SRM using the vendor master data user exit (SAPMF02K)?
    Does anyone have documentation on the user exit, how do I use it??
    Thanks and Regards'
    David

    Hi David,
    Please go through the link below:
    [Enhancement SAPMF02K Vendor Master Data  - question about LIFNR;
    Regards
    Anirban

  • Error while loading data from ECC to BI

    Hi BW Experts,
    while loading data from ECC 6.0 to BI  i got error in details tab of the infopackage as datapackage 1  arrived in bw processing not yet finished.
    Could any one help me out?
    Thanks

    Amar,
       please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
    to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
    once this over check the TRFC or IDocs struck
    if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
    if you are finding TRFcs are in stuck just select and run manually to complete.
    M

  • Transfer Data from ECC to SRM

    Hi ,
    I'm trying to transfer data from ECC to SRM for creating bid document ( Function : BBP_PD_BID_CREATE ). After transferring the data I want to get the data back to ECC ( I need bid document number to write on delivery document's field ). What's the best way to do this ?
    Regards.

    Hi vinit ,
    I've written code to call 'BBP_PD_BID_CREATE' in ECC. But ECC and SRM have different structures. So i am not sure how i can define data to send SRM.
    Here is my code in ECC program
    CALL FUNCTION 'BBP_PD_BID_CREATE' IN BACKGROUND TASK
       DESTINATION 'XXX'
       IMPORTING
         I_REF_GUID    =
         I_BAPIMODE    =
         I_PARK        =
         I_SAVE        =
         I_TESTRUN     =
         I_HEADER      = I_HEADER ?
         IT_ATTACH     =
         IT_DYN_ATTR   =
         IT_CONDITIONS =
        EXPORTING
          E_HEADER      = E_HEADER ?
          ET_ATTACH     =
          ET_DYN_ATTR   =
          ET_CONDITIONS =
        TABLES
           I_ITEM        =
           I_PARTNER     =
           I_LONGTEXT    =
           I_SDLN        =
           I_ORGDATA     =
           I_HCF         =
           I_ICF         =
           I_TOL         =
           I_WEIGHT      =
           IT_EXCHRATE   =
           E_ITEM        =
           E_PARTNER     =
           E_LONGTEXT    =
           E_SDLN        =
           E_ORGDATA     =
           E_HCF         =
           E_ICF         =

  • Regarding Short Dump While loading data from DB Connect

    Dear All,
    We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
    Runtime Error          PERFORM_CONFLICT_TAB_TYPE  
    Except.                   CX_SY_DYN_CALL_ILLEGAL_TYPE
    What could be the reason for the error that I am getting

    hi,
    Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
    Summary
    Symptom
    When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
    ("X") The row types of the two tables are incompatible.
    ("X") The table keys of the two tables do not correspond.
    Other terms
    transactional InfoCube, SEM, BPS, BPS0, APO
    Reason and Prerequisites
    The error is caused by an intensified type check in the ABAP runtime environment.
    Solution
    Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
    Apply the attached correction instructions.
    BW 3.0B
    Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
    BW 3.10 Content
    Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
    BW3.50
    Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
    The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
    Header Data
    Release Status: Released for Customer
    Released on: 18.02.2004 08:11:39
    Priority: Correction with medium priority
    Category: Program error
    Primary Component: BW-BEX-OT-DBIF Interface to Database
    Secondary Components: FIN-SEM-BPS Business Planning and Simulation
    Releases
    Software
    Component Release From
    Release To
    Release And
    subsequent
    SAP_BW 30 30B 30B
    SAP_BW 310 310 310
    SAP_BW 35 350 350
    Support Packages
    Support
    Packages Release Package
    Name
    SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
    Related Notes
    693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
    647752 - SAPBWNews BW 3.0B Support Package 20
    601051 - SAPBWNews BW 3.1 Content Support Package 14
    Corrections Instructions
    Correction
    Instruction Valid
    from Valid
    to Software
    Component Ref.
    Correction Last
    Modifcation
    301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
    Attributes
    Attribute Value
    weitere Komponenten 0000031199
    Thanks
    (Activate ODS/Cube and Transfer rules again..)

  • Mandatory fields to replicate vendor from ECC to SRM

    Hi all,
    I created a vendor in ECC with all mandatory fields. But when I tried to replicate the vendors to SRM from ECC, I am getting errors like mandatory fields are missing. Can you please tell me what are the mandatory fields in SRM when we replicate vendors from ECC to SRM. Its Urgent.
    Regards,
    Balaji.S

    Hi Balaji,
    When you create Vendors properly in ECC it should not give such an error. You have to maintain basic data, Accounting data and purchasing data. Rest all are optional.
    For replicating vendors from R/3 to SRM you should have a Vendor root org / group in SRM. BBPGETVD is used to replicate vendors to SRM by mentioning the logical system and Vendor Group ID.
    Hope this makes you clear. Please explain the error clearly for further help.
    Award points for helpful answers.
    Rgds,
    Teja

  • SEND PR data from ECC to SRM using PI

    Hi PI Guru's
    Please advise if there is any documentation to send the PR's from ECC to SRM using PI.
    If not PRs in general if need to exchange any documents from ECC6.0 to/from SRM using PI.
    Can we use ABAP proxys or IDOCs.
    Any help would be greatly appreciated.
    Rgds
    Nikki

    decide proxy or IDOC or RFC based on the business requirement, first search any std IDOc or RFc available if not then go for proxies.
    chirag

  • Error while replicating data from MSSQL to HANA

    Hello Colleagues,
    I have created SLT configuration where the replication has to happen from MSSQL database for NW BPM for 4 tables. I have also applied a transformation function to convert date columns in the BPM tables to right desired format while replicating in HANA.
    Now when I use the SAP HANA Data Provisioning Editor to replicate the data from these BPM tables, I am getting following error :
    Conv.obj. Z_BC_BPEM_EL_RDS_021: Calculation job in sender system could not be started
    In the configuration I have used Job Options as No of data Transfers Job : 003 , Initial Load Jobs : 002 , No of Calculations Job : 001
    We are using SLT 2.0 and BASIS release 740.
    Please suggest what could be done to remove that.
    Regards,
    Archana

    Archana
    There could be number of reasons for this issue. We need to first start filtering one by one and take out the possibility. Please check the things in the following order.
    1. As everyone mentioned, check if you have free available WPs. System is going to use Background WP for running calculation job in the Source system. Normally Basis define sufficient number of WPs but sometimes they are occupied.  You can check using TCode SM50 ( you need to do that on each host in a multi App server environment ).
    2. Try increasing your calculation jobs in SLT using TCODE LTRC --> Administration Data --> Change no of Jobs. Make sure you have enough free background WP in your SLT and Source system.
    Incase the above methods do not work, provide the following information.
    1. Where exactly you see the error message. Are you able to add the table to Data provisioning from LTRC.
    2. Are you able to add any more tables and do the replication.
    Mahesh Shetty

  • Error in SMW01for BP while replicating data from R/3 to CRM

    Hi Experts,
       While doing initial load for Customers from R/3 to CRM am getting errors as "Customer number already assigned to business partner" in SMW01 error message
    Can anyone please help me on this.....
    Regards,
    Rahul

    Hi Rahul
    As stated above this will happen in case the number is already assigned to a business partner.
    Are you
    1. <u>Reconnecting</u> the CRM system to a  new R/3 and the CRM system has data from an old system?
    2. Has the replication been done before
    3. In case this is a new CRM system and numbers are being generated for the first time check the numbering range. (are the CRM numbers for this BP defined as external if R3 is the leading system?) the numbering ranges should not overlap or this will be a common scenario.
    Rewards points if this was helpful.

  • LSMW-IDOC error while tranferring data from ECC to CRM

    Hi,
    We got an error
    Error status 'A' calling validation service.
    Validation error occured: "Module CRM_BUPA_MAIN_VAL, B Doc type BUPA_MAI".
    When we are doing LSMW with IDOC in CRM.
    Please provide ur valuable help in this problem.
    Thanks & Regards
    Sriram Tumuluri

    Amar,
       please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
    to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
    once this over check the TRFC or IDocs struck
    if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
    if you are finding TRFcs are in stuck just select and run manually to complete.
    M

  • Error in replicating data from r3 to SRM

    hi,
    my entries in database table comm_product(SRM) was deleted by mistake,now  when i run T-code r3as, i get the error 'Hierarchy for R/3 material types does not exist', please help.
    regards,
    johny.

    Hi,
    Using com_hierarchy check whether hierarchies are present are not. Start down load of customizing objects first and then business objects. In R3AS select DNL_CUST_BASIS3,DNL_CUST_PROD0, DNL_CUST_PROD1, then MATEIRAL and start down load again.
    Rgds,
    RRK

  • Replication of hierarchical levels labels from ECC to SRM

    Hi Gurus!
    I am working on SRM 5.0 in Classic scenario and ECC 6.
    We are trying to replicate data from ECC to SRM in order to retrieve the same organisational structure as the one existing in ECC in SRM.
    We succeed in replicating hierarchical levels from ECC to SRM, indeed we retrieve data of infotype 0001 employee subgroup in table HRP5581-PERSK. But we did not retrieve labels of those subgroups?
    Have we missed to customize a filter in tx BD64 in ECC? Or the problem is just that data replication does not send hierarchical levels labels from ECC to SRM?
    Please help!!
    Thanks a lot.
    Regards,
    Morgane Chevallier

    Hello all!!
    Any idea on the subject??
    Please help!
    Regards,
    morgane

  • Delivery address replication from ECC to SRM

    Hello All
    We are onboarding a punch-out vendor in SRM. The Vendor said that they won't read the delivery address sent by us in the PO output, but would rather pre-store all the delivery addresses and their codes.
    The code would be auto read & this way they can ship immediately with just 1 day lead time.
    We are using classic scenario and noticed that when the PO is created in the backend, it always creates a new address number each time  , even for the same address.
    We are mulling about a process where the Ship to address would be created in ECC and replicated to SRM , with the same number as ECC.
    So my question is :
    1) Is it possible to replicate the Addresses from ECC to SRM using any report or ALE?If yes what is the process for the same.
    2) Can we maintain the number range of the Ship to address object in SRM as external, so that ECC and SRM has the same #s.
    Thanks
    Kedar

    Hi Kedar,
    1) Is it possible to replicate the Addresses from ECC to SRM using any report or ALE?If yes what is the process for the same.
    Ans : You can create delivery address in SRM from ECC by creating a Report and Utilizing RFC function module to read address
    data from ECC and creating the same in SRM through FM BBP_BUPA_ADDRESS_ADD [i hope the FM  is correct as i do not have the system now].
    I dont know of any standard interface though ....
    2) Can we maintain the number range of the Ship to address object in SRM as external, so that ECC and SRM has the same #s.
    Ans : Does not  look possible to be .. since there are amny type of addresses in the system all uses the same internal number range.  You can utilize some of unused field in delivery address to store the address number of ECC system like  Building code , Street_suppl 3 etc ...
    However i suggest do not make things complex and keep it simple.
    Cheers
    Iftekhar Alam

  • Error while updating data from PSA to ODS

    Hi Sap Gurus,
    I am facing the error while updating data from PSA to ODS in BI 7.0
    The exact error message is:
    The argument 'TBD' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
    Please suggest how to proceed on this issue.
    Points will be awarded.

    Hi ,
    Try to simulate the process.That can give you exact error location.
    It seems like while updating few records may be no in the format of the field in which it is updated.
    Regards
    Rahul Bindroo

Maybe you are looking for

  • How can I create my icloud account

    How can I create my icloud account?.

  • SQL loader and stream files with new line '

    I have been trying unsuccessfully to load EDI files using SQL loader. The problem is that the lines are terminated by ' and when I use the stream file option it does not recognise the line terminator given. As I understand it from the documentation t

  • Checked for updates and tried to download latest version of itunes but it will not install

    Please help !!! I have had itunes installed for years but allof a sudden, when I try to complete an action (create a playlist for example) I get an error message "Itunes has stopped working and must close" I searched for updates and tried to install

  • Adjust brightness of iMac as 2nd monitor

    I have a 2012 MacBook Air plugged into an older iMac via mini Display port cable. (Not thunderbolt). How can I adjust the brightness of the iMac? The Displays system prefs doesn't have a brightness slider for the iMac screen. And the brightness keys

  • How to use htree on form 6i

    Hi guys! I have no idea how to use the tree in the form 6i.I have a table which defines the testcode and testname of the lab test and made the forms which show the test results. I gave the name to these forms as describes in the table i.e.(testname).