Regarding alv report with check boxes
Hai,
i have four check boxes as input named new,rejected,accepted and all.these four four check boxes information is nothing but the information that displayed under one field in my internal table.if i click the new check box means that corresponding
data has to be display similarly for accepted and rejected .if i click the all check box means all records has to be displayed.now i am facing one problem if i suppose to click all check box with either new or rejected orelse accepted orelse with all the three with all check box means then it wont goes to output instead of that it remains in the same window i.e input screen. pls tell me the solution as soon as possible.
with regards,
R.Dhineshraj.
hi dhinesh,
one thing...wen ur writing a code for checkboxes ...checck for the following..
1> for individual check box code...one check box should b selected at a time..
2> for combination of checkboxes...after end-of-selection event...where u put this condition...give the if-clause with and condition...for all possible conditions of all 4 checkboxes...
den accordingly...select the form-perform corresponding to the checkbox selection...
example code..im writing here...for individual assignment...
PARAMETERS: invoiced AS CHECKBOX.
PARAMETERS: good_iss AS CHECKBOX.
END-OF-SELECTION.
IF invoiced = 'X'.
PERFORM create_fieldcatalog.
PERFORM display_data.
ELSE.
IFgood_iss = 'X'.
let me knw if it helps u..
regards
kanika
Similar Messages
-
Logic for a report with check boxes
Hi All ,
I m writting a report , I need to put FOUR check box in this report ,
For example you can say Check1 ( material1)
Check2 ( material2)
Check3 ( material3)
Others
In selection critriea I defined one select option ( eg materail )
Now I have to diplay data accordingly checkboxes
If Check box '<b>check1'</b> is selected -list must contains only material1
If Check box '<b>check2'</b> is selected -list must contains only material2
If Check box '<b>check3</b>' is selected -list must contains only material3
If Check box '<b>check1</b>' or any other one is selected -list must contains material1 and other materail as per other selected check box .
If Check box<b> others</b> is selected then all other fields ( except the selected check box ) are the out put of this report .
IF you need more explaination of my query , plz let me know .
Regards ,
NarenderREPORT ZTEST3 line-size 400.
tables : mara.
data i_mara like mara occurs 0 with header line.
data i_marc like marc occurs 0 with header line.
data i_mcha like mcha occurs 0 with header line.
data i_mkol like mkol occurs 0 with header line.
select-options: s_matnr for mara-matnr.
parameters : p_check1 as checkbox.
parameters : p_check2 as checkbox.
parameters : p_check3 as checkbox.
parameters : p_check4 as checkbox.
start-of-selection.
if p_check1 = 'X'.
select * from mara into table i_mara where matnr in s_matnr.
loop at i_mara.
endloop.
endif.
if p_check2 = 'X'.
select * from marc into table i_marc where matnr in s_matnr.
loop at i_marc.
endloop.
endif.
if p_check3 = 'X'.
select * from mcha into table i_mcha where matnr in s_matnr.
loop at i_mcha.
endloop.
endif.
if p_check4 = 'X'.
select * from mkol into table i_mkol where matnr in s_matnr.
loop at i_mkol.
endloop.
endif. -
Hi All,
I have developed a ALV grid report where my first feild is checkbox.My requirement is that when user select some records using check box in output then a BDC should call to update each records.
But i am enable to get checked records when i click a button on application toolbaar.Please sugest me the way to get checked records.
I have used below code:
WA_FIELDCAT-FIELDNAME = 'CHECKBOX'.
WA_FIELDCAT-TABNAME = 'IT_BLOCKED_CUS'.
WA_FIELDCAT-CHECKBOX = 'X'.
wa_FIELDCAT-INPUT = 'X'.
WA_FIELDCAT-EDIT = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'KUNN2'.
WA_FIELDCAT-TABNAME = 'IT_BLOCKED_CUS'.
WA_FIELDCAT-SELTEXT_L = TEXT-001.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'KUNNR'.
WA_FIELDCAT-TABNAME = 'IT_BLOCKED_CUS'.
WA_FIELDCAT-SELTEXT_L = TEXT-002.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EVENTS = IT_EVENTS
I_SAVE = 'A'
I_GRID_SETTINGS = S_GLAY
IT_SORT = IT_SORT
I_DEFAULT = 'X'
TABLES
T_OUTTAB = IT_BLOCKED_CUS
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
MESSAGE I018.
LEAVE LIST-PROCESSING.
ENDIF.
FORM PF_STATUS USING LT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ZSTATUS'.
ENDFORM.
FORM USER_COMMAND USING G_UCOMM TYPE SY-UCOMM
R_SELFIELD TYPE SLIS_SELFIELD.
data: REF_GRID TYPE REF TO CL_GUI_ALV_GRID,
l_valid type c.
CASE G_UCOMM.
WHEN '&BLK_UNBLK'.
IF REF_GRID IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA
ENDIF.
loop at IT_blocked_cus into wa_blocked_cus where CHECKBOX = 'X' .
PERFORM CALL_BDC.
endloop.
Please help me.
Regards,
Mohit khandelwalFORM USER_COMMAND USING G_UCOMM TYPE SY-UCOMM
R_SELFIELD TYPE SLIS_SELFIELD.
data: REF_GRID TYPE REF TO CL_GUI_ALV_GRID,
l_valid type c.
break-point.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA
ENDIF.
CASE G_UCOMM.
WHEN '&BLK_UNBLK'.
loop at IT_blocked_cus into wa_blocked_cus where CHECKBOX = 'X' .
PERFORM CALL_BDC.
endloop.
endcase.
endform.
keep break-point in the above form and see. what is happening. -
Interactive report with check boxes
i want to create a report in which there should be check boxes for every record & when i'll check those check boxes it should show me the sublist of the checked records.
hi,
try like this
DATA : BEGIN OF wi_cust OCCURS 0 ,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1,
adrnr LIKE kna1-adrnr,
END OF wi_cust.
DATA : BEGIN OF wi_adrc OCCURS 0 ,
kunnr LIKE kna1-kunnr,
name1 LIKE adrc-name1,
city1 LIKE adrc-city1,
END OF wi_adrc.
DATA : chk1 TYPE c,
lines TYPE i,
lines1 TYPE i..
DATA: c TYPE c, ind TYPE c.
DATA : v_line TYPE sy-index.
SELECT kunnr name1 adrnr UP TO 10 ROWS FROM kna1 INTO TABLE wi_cust.
LOOP AT wi_cust .
WRITE : / chk1 AS CHECKBOX ,sy-vline, wi_cust-kunnr,wi_cust-name1,wi_cust-adrnr.
HIDE : wi_cust-kunnr, chk1.
ENDLOOP.
END-OF-SELECTION.
lines = sy-linno - 1.
AT LINE-SELECTION.
CHECK sy-lsind = 1.
WINDOW STARTING AT 5 4
ENDING AT 85 20.
DO lines TIMES.
CLEAR chk1.
READ LINE sy-index FIELD VALUE chk1.
IF chk1 = 'X'.
ind = sy-index - 2.
READ TABLE wi_cust INDEX ind.
SELECT name1 city1 FROM adrc INTO CORRESPONDING FIELDS OF TABLE wi_adrc
WHERE addrnumber = wi_cust-adrnr.
READ TABLE wi_adrc INDEX 1.
WRITE : / wi_adrc-name1, wi_adrc-city1.
ENDIF.
ENDDO. -
How to validate values in alv report with check table
Hi All,
I have created one editable ALV in which user can enter material(matnr). Now I want to validate the value entered by the user before saving it to my custom table. I am using 'SLIS_T_FIELDCAT_ALV' as field catalog. Is there any field in this which I need to pass to validate material. I don't want to go for coding for this. I tried to search for this but did not get anything. Please help.
Regards,
Manish SethiaHi Andreas,
I tried but that is not working. Do I need to handle some event or command to get it validated. My code is as follows.
FORM f_build_field_catalouge USING p_fieldname TYPE any
p_tabname TYPE any
p_inputlen TYPE any
p_fieldtext TYPE any
p_edit TYPE any
CHANGING p_col_pos TYPE any.
CLEAR wa_fcat.
p_col_pos = p_col_pos + 1.
wa_fcat-fieldname = p_fieldname .
wa_fcat-tabname = p_tabname.
IF p_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MARA'.
wa_fcat-ref_fieldname = 'MATNR'.
ELSEIF p_fieldname = 'MATPGRP'.
wa_fcat-ref_tabname = 'ZOTC_FLEX_MAT'.
wa_fcat-ref_fieldname = 'MATPGRP'.
ENDIF.
wa_fcat-intlen = p_inputlen . "colume width
wa_fcat-seltext_m = p_fieldtext.
wa_fcat-edit = p_edit ."'X'.
wa_fcat-col_pos = p_col_pos.
APPEND wa_fcat TO t_fcat.
ENDFORM.
But this one is not working.
Regards -
Can I get a sample program of ALV (oops) with check boxes in it. thank you.
Types: begin of lt_io.
include structure mara. " Your Structure
Types: style_table type lvc_t_style.
Types: end of lt_io.
data: lt_io type table of lt_io,
ls_layout type lvc_s_layo,
lt_fcat type lvc_t_fcat,
lo_grid type ref to cl_gui_alv_grid.
field-symbols: <io> type lt_io,
<fcat> type lvc_s_fcat.
... fill your output table ....
ls_layout-stylefname = 'STYLE_TABLE'.
loop at lt_io assigning <io>.
PERFORM set_style USING 'CHECKBOX' "Your Filename
CHANGING <io>.
endloop.
... Fill Your Field Catalog lt_fcat
read table lt_fcat assigning <fcat>
where fieldname = 'CHECKBOX'.
<fcat>-checkbox = 'X'.
create grid control lo_grid.
CALL METHOD lo_grid->set_table_for_first_display
EXPORTING
is_layout = ls_layout
CHANGING
it_fieldcatalog = lt_fcat
it_outtab = lt_io[].
FORM set_button_to_line
USING iv_fieldname TYPE lvc_fname
CHANGING cs_io TYPE io.
DATA: ls_style TYPE lvc_s_styl,
lt_style TYPE lvc_t_styl.
ls_style-fieldname = iv_fieldname.
if cs_io-checkbox = ' '.
ls_style-style = cl_gui_alv_grid=>mc_style_enabled.
else.
ls_style-style = cl_gui_alv_grid=>mc_style_disabled.
endif.
ls_style-maxlen = 2.
INSERT ls_style INTO TABLE io-style_table.
ENDFORM. "set_icon_to_status_line
[/code].
A classical report is a program that generates a single list, which must contain all of the required detail information.
1) This procedure may result in extensive lists from which the user has to pick the relevant data.
2) For background processing, this is the only possible method. After starting a background job, there is no way of influencing the program.
3) The desired selections must be made beforehand and the list must provide detailed information.
4) For dialog sessions, there are no such restrictions.
5) The user is present during the execution of the program and can control and manipulate the program flow directly.
6) To be able to use all advantages of the online environment, classical reporting was developed into interactive reporting.
ALV is Application List viewer. Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain up to 90 columns in the display with the wide array of display options.
Advantages.
Collapse multiple reports into one, drastically cutting down your report development time
Save many hours using built-in ALV sorting, subtotaling and filtering capabilities
Add conditional structures into your ALV report: No programming required!
Combine ALV with display variants to meet a wide range of reporting requirements more easily
Dynamically reorder column layouts and add/subtract fields
Enable users and analysts to save their own personalized variants
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
declarations for spl.group.
GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV
GT_SORT TYPE SLIS_T_SORTINFO_ALV, "for sort
DATA: LS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR LS_SORT.
LS_SORT-FIELDNAME = 'FIELD1'.
LS_SORT-SPOS = 1.
LS_SORT-UP = 'X'.
ls_sort-subtot = 'X'. "subtotal
APPEND LS_SORT TO E06_LT_SORT.
APPEND LS_SORT TO E06_LT_SORT.
LS_SORT-FIELDNAME = 'FIELD2'.
LS_SORT-SPOS = 2.
LS_SORT-UP = 'X'.
ls_sort-subtot = 'X'. "subtotal
APPEND LS_SORT TO E06_LT_SORT.
for creating the group..
DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
CLEAR LS_SP_GROUP.
LS_SP_GROUP-SP_GROUP = 'A'.
LS_SP_GROUP-TEXT = TEXT-005.
APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
and pass this info to FM...
layout-sUBTOTALS_TEXT = 'SUbt...'
and pass spl group info to fieldcatalog also...
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
IT_SPECIAL_GROUPS = GT_SP_GROUP[]
IT_SORT = GT_SORT[]
TYPES :
BEGIN OF ty_vbak,
vkorg TYPE vbak-vkorg, " Sales organization
kunnr TYPE vbak-kunnr, " Sold-to party
vbeln TYPE vbak-vbeln, " Sales document
netwr TYPE vbak-netwr, " Net Value of the Sales Order
waerk TYPE vbak-waerk, " Document currency
END OF ty_vbak.
DATA:
vbak TYPE vbak,
gt_vbak TYPE TABLE OF ty_vbak.
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg, " Sales organization
s_kunnr FOR vbak-kunnr, " Sold-to party
s_vbeln FOR vbak-vbeln. " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
Form f_read_data
FORM f_read_data.
SELECT vkorg kunnr vbeln netwr waerk
UP TO p_max ROWS
INTO TABLE gt_vbak
FROM vbak
WHERE kunnr IN s_kunnr
AND vbeln IN s_vbeln
AND vkorg IN s_vkorg.
ENDFORM. " F_READ_DATA
Form f_display_data
FORM f_display_data.
TYPE-POOLS: slis. " ALV Global types
DEFINE m_fieldcat.
add 1 to ls_fieldcat-col_pos.
ls_fieldcat-fieldname = &1.
ls_fieldcat-ref_tabname = 'VBAK'.
ls_fieldcat-do_sum = &2.
ls_fieldcat-cfieldname = &3.
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
add 1 to ls_sort-spos.
ls_sort-fieldname = &1.
ls_sort-up = 'X'.
ls_sort-subtot = &2.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv,
lt_sort TYPE slis_t_sortinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
ls_layout TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'. " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'. " Sort by kunnr and subtotal
m_sort 'VBELN' ''. " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = ls_layout
it_fieldcat = lt_fieldcat
it_sort = lt_sort
TABLES
t_outtab = gt_vbak.
ENDFORM.
Check out these sample programs
BCALV_GRID_01
This program illustrates how the events for print processing PRINT_TOP_OF_PAGE,
PRINT_END_OF_PAGE, PRINT_TOP_OF_LIST,PRINT_END_OF_LIST are handled. The
corresponding handler methods control the appearance of the list printed.
BCALV_GRID_02
Show a detail list in an amodal window. There is no second dynro needed in contrast to
BCALV_GRID_03.
BCALV_GRID_03
This program implements a function on event DOUBLE_CLICK. According to the selected line data
from table SBOOK is selected and displayed by a second ALV Control in a dialog dynpro.
BCALV_GRID_04
Illustrates the use of exceptions (lights or leds). According to the values of SFLIGHT-SEATSOCC, the
lights are set to 1 (red), 2 (yellow) or 3 (green).
BCALV_GRID_05
Demonstrate the creation of an own toolbar button.
BCALV_GRID_06
Demonstrate the creation of an own context menu.
BCALV_GRID_07
Append a menu button to the standard toolbar.
BCALV_GRID_08
Append a menu with default button to the standard toolbar. It is exactly the same as
BCALVC_TB_WITH_MENU except for methods HANDLE_MENU_BUTTON and HANDLE_TOOLBAR.
Editable ALV grids
BCALV_EDIT_01
This report illustrates the simplest case of using an editable/noneditable ALV Grid Control.
BCALV_EDIT_02
This report illustrates how to set chosen cells of an ALV Grid Control editable.
BCALV_EDIT_03
In this example the user may change values of fields SEATSOCC (occupied seats) and/or PLANETYPE.
The report checks the input value(s) semantically and provides protocol messages in case of error
BCALV_EDIT_04
This report illustrates how to add and remove lines to a table using the ALV Grid Control and how to
implement the saving of the new data.
BCALV_EDIT_05
This example shows how to use checkboxes within an ALV Grid Control. You learn:
(1) how to define a column for editable checkboxes for an attribute of your list
(2) how to evaluate the checked checkboxes
(3) how to switch between editable and non-editable checkboxes
BCALV_EDIT_06
This example shows how to define a dropdown listbox for all cells of one column in an editable ALV
Grid Control.
BCALV_EDIT_07
This example shows how to define dropdown listboxes for particular cells of your output table.
BCALV_EDIT_08
This report implements an ALV Grid Control with an application specific F4 help. The following aspects
are dealt with:
(1) how to replace the standard f4 help
(2) how to pass the selected value to the ALV Grid Control
(3) how to build an f4 help, whose value range depend on a value of another cell.
Check this link tooo
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/23/oopsALVin+ABAP&showComments=true
The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
How you call this function in your report?
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
check these links
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
Try these links
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
For More alv report examples check these Tcodes LIBS, BIBS Here u can find more number of examples on alv reports of different kinds
check this sample code for intercative alv report
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH -
Problem with check box in ALV Grid Display
I am Displaying Material Master Data in ALV Grid Display with Check Box for each record and if i checked check box then i am processing Update operation in Database, my question is after perform update operation check box should be clear.
Kindly help me!!!!Hello Raj
Given the fact that you do not tell us the most important piece of information (namely whether you are using OO-based ALV or not) I assume you are using fm-based ALV lists.
In this case you probably have defined a USER_COMMAND routine as described in the documentation of the fm.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* define local data
DATA: ls_outtab LIKE LINE OF gt_outtab,
ld_idx TYPE i.
LOOP AT gt_outtab INTO ls_outtab
WHERE ( chkbox = 'X' ).
ld_idx = syst-tabix.
" Call your update function / method / perform
ls_outtab-chkbox = space.
MODIFY gt_outtab FROM ls_outtab INDEX ld_Idx
TRANSPORTING chkbox.
ENDLOOP.
" And now trigger refresh of the ALV display:
rs_selfield-refresh = 'X'. " <<< !!!
ENDFORM.
Regards
Uwe -
Hi! I am newbie to Reports need help with check boxes
Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!
and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine. -
Hi Experts,
I have an ALV grid display with check box.
I need to display the ALV with only check box. I don't need the Grid towards the left.
So can anyone tell me how to avoid the Grid which is at the left.
I am using "REUSE_ALV_GRID_DISPLAY" Function Module.
Thanks,
Karthik MDHi,
I am pasted my code below.
wa_fieldcat_s-fieldname = 'FLAG'.
wa_fieldcat_s-outputlen = 1.
wa_fieldcat_s-checkbox = c_check.
wa_fieldcat_s-edit = c_check.
wa_fieldcat_s-col_pos = 1.
wa_fieldcat_s-seltext_l = 'Select'.
wa_fieldcat_s-no_out = 'X'.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'SRID'.
wa_fieldcat_s-key = 'X'.
wa_fieldcat_s-fix_column = 'X'.
wa_fieldcat_s-seltext_l = 'SR Global ID'(101).
wa_fieldcat_s-col_pos = 2.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'PERNR'.
wa_fieldcat_s-seltext_l = 'Employee Number'(102).
wa_fieldcat_s-col_pos = 3.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'ZZAGREEMENT_ID'.
wa_fieldcat_s-seltext_l = 'Agreement ID'(103).
wa_fieldcat_s-col_pos = 4.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'IT0041ENDDA'.
wa_fieldcat_s-seltext_l = 'HCMS END DATE'(104).
wa_fieldcat_s-col_pos = 5.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'ASSIGN_END_DATE'.
wa_fieldcat_s-seltext_l = 'Assignment End Date'(105).
wa_fieldcat_s-col_pos = 6.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'FNAME'.
wa_fieldcat_s-seltext_l = 'First Name'(106).
wa_fieldcat_s-col_pos = 7.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'LNAME'.
wa_fieldcat_s-seltext_l = 'Last Name'(106).
wa_fieldcat_s-col_pos = 8.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = prog_name
i_callback_pf_status_set = 'PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
is_layout = l_layout
it_fieldcat = fieldcat_s[]
it_events = t_events[]
i_save = 'X'
TABLES
t_outtab = lt_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks,
Karthik MD -
Hi experts 1 query regarding alv report running in background
when i run my alv report with 40 columns in background in spool when i get output disturbed 20 lines of first row is moving to second row so when i download to excel the o/p is completely disturbed and no use for me is there any way to solve this problem.please reply
hi ,
this will solve your problem
http://www.****************/Tutorials/ALV/Spool/width.htm
Increasing the width of the spool when using ALV List
By Aafaque Husain, YASH Technologies
Whenever an ALV report (with more number of columns) is scheduled in background, the output will be displayed in a zigzag fashion as shown below:
If we try to download the output from the spool or try to view the output, then we observe that the output is not in an appropriate fashion.
To get the right format of output in the spool we generally increase the u201Cno. of columns fieldu201D in the Format typesu201D. Have a look at the following screenshot:
Sometimes even when we change this field, we get the output truncated at the end, like last few columns are not displayed. There is certain limitation for this field, so that even if increase this value again, we find no change in the output display in spool.
This value is effective only when we check the check box u201CNumber of columns from list display formatu201D in the SPAD transaction.
Ø GO to SPAD Transaction code
Ø In the menu Settings -> Spool System as shown belowu2026
Ø In the others tab check the first check box in the Output Controller block, SAVE and exit.
Now Schedule the ALV report again by providing the output device and format, and then we get the full output in the spool as shown below:
Regards,
Madhavi -
Create a Procedural ALV Report with editable fields and save the changes
Hi,
I am new to ABAP. I have created a Procedural ALV Report with 3 fields. I want to make 2 fields editable. When executed, if the fields are modified, I want to save the changes. All this I want to do without using OO concepts. Please help . Also, I checked out the forum and also the examples
BCALV_TEST_GRID_EDIT_01
BCALV_TEST_GRID_EDIT_02
BCALV_TEST_GRID_EDIT_04_FORMS
BCALV_TEST_GRID_EDITABLE
BCALV_EDIT_01
BCALV_EDIT_02
BCALV_EDIT_03
BCALV_EDIT_04
BCALV_EDIT_05
BCALV_EDIT_06
BCALV_EDIT_07
BCALV_EDIT_08
BCALV_FULLSCREEN_GRID_EDIT
But all these are using OO Concepts.
Please help.
Regards,
SmruthiTABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) TYPE c, "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-edit = 'X'
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-info_fieldname = 'LINE_COLOR'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_pf_status_set = 'STATUS'
i_callback_top_of_page = 'TOP-OF-PAGE'
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = it_ekko
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
DATA: ld_color(1) TYPE c.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekko.
LOOP AT it_ekko INTO wa_ekko.
ld_color = ld_color + 1.
IF ld_color = 8.
ld_color = 1.
ENDIF.
CONCATENATE 'C' ld_color '10' INTO wa_ekko-line_color.
MODIFY it_ekko FROM wa_ekko.
ENDLOOP.
ENDFORM. " DATA_RETRIEVAL
FORM top-of-page *
FORM top-of-page.
WRITE:/ 'This is First Line of the Page'.
ENDFORM.
FORM status *
FORM status USING rt_extab TYPE slis_t_extab. .
SET PF-STATUS 'ALV'.
ENDFORM.
FORM USER_COMMAND *
--> RF_UCOMM *
--> RS *
FORM user_command USING rf_ucomm LIKE sy-ucomm
rs TYPE slis_selfield.
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref1.
CALL METHOD ref1->check_changed_data.
CASE rf_ucomm.
when 'SAVE'.
get all the modified entries and store them in an internal table and udpate them in to the required transaction or your custom table.
endcase.
endform.
ENDFORM.
here u need to 2 performs for PF status and USER_COMMAND in the ALV parameters.
create a custom PF status and create push buttons and assign your ok codes in your PF status.
if the field has to be edited in the ALV then pass EDIT = 'X' for that field in the fieldcatlog preparation.
Hope this will help you.
Regards,
phani. -
Regarding ALV Reporting in ABAP
Hi All,
I have some clarifications related to <b>ALV Reporting</b> in ABAP.
<b>Actually i have to create ALV report with Structure Length/Each record length is around 300 characters.</b>
Is it possible to create a ALV Report with <b>300</b> length for each record!
If possible which is the best<b>[ALV]</b> method for the same!
Can anybody give me the solution!
Thanks in advance.
Thanks & Regards,
Prasad.Hai Prasad
Check with the code
*& Report ZALV_PRAKASH_SAMP *
REPORT ZALV_PRAKASH_SAMP .
TABLES: MARA.
TYPE-POOLS : SLIS.
Data declaration
DATA: BEGIN OF I_MARA OCCURS 0.
INCLUDE STRUCTURE MARA.
DATA: END OF I_MARA.
DATA: V_REPID LIKE SY-REPID.
selection-screen
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS : S_MATNR FOR MARA-MATNR.
PARAMETERS: P_MTART LIKE MARA-MTART DEFAULT 'ROH'.
SELECTION-SCREEN END OF BLOCK B1.
initialisation
INITIALIZATION.
S_MATNR-LOW = '1400'.
S_MATNR-HIGH = '1500'.
APPEND S_MATNR.
V_REPID = SY-REPID.
start-of-selection
START-OF-SELECTION.
SELECT * FROM MARA
INTO TABLE I_MARA
WHERE MATNR IN S_MATNR AND
MTART = P_MTART.
CHECK SY-SUBRC = 0.
end of selection
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = 'MARA'
IS_LAYOUT =
IT_FIELDCAT =
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = I_MARA
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at i_mara.
write:/ i_mara.
endloop.
Thanks & Regards
Sreenivasulu P -
Hi ,
Can Anyone please tell the function module for POPUP with check box.
Thanks & Regards
Ruchi TiwariHi Ruchi,
U can use reuse_alv_popup_to_select Fuction module . so that u will see the the alv with checkbox..
Otherwise If u don't want check box u can use popup_to_confirm FM.
Thanks & regards,
Nishad. -
Print or download ALV report with sort options
Dear friends,
How i can download into excel or print ALV report with sort options, like customer name column with similar values should not repeat in the print out or download file.
Regards,
Praveen LoboHi Praveen,
Use this code, its working:-
*FOR SORTING DATA
DATA : it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv.
* SORT W.R.T. CUSTOMER NAME
wa_sort-spos = 1.
wa_sort-fieldname = 'NAME1'. "field customer name
wa_sort-tabname = 'IT_KNA1'. "internal table with records
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
"this will sort the ALV o/p for customer with same name
"now the name will not be repeated
"records with same name will be grouped
* DISPLAY RECORDS IN ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid "report id
it_fieldcat = it_field "field catalog
it_sort = it_sort "sort info
TABLES
t_outtab = it_kna1 "internal table
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir
Edited by: Tarun Gambhir on Dec 31, 2008 1:13 PM -
How to Show data in grouping with check boxes.
Hi Experts,
I am new to ADF and want to resolve one issue for my urgent project requirement.
My Problem is :
In Employee, Department relationship i need to show data in a grouping of departments like for Marketing department all the related employees should come in a single column.
eg .
Dept Name Emp Name
Marketing Akshay Nitin Ritu
Sales Neeraj Vikas Venu
* All these department names and employees should come with check boxes and if i select one department all the employees should be checked.
Please Please suggest any solution asap.
Many Thanks in Advance.
Regards,
Nitin
Edited by: user10980736 on Feb 7, 2011 8:32 AMhi,
You can create two value nodes for storing these collections. The first one would be singleton node as it is the main list. Under that create the second node with singleton = false.
e.g.
---NodeA
--attrA1
--attrA2
--NodeB(singleton = false)
--attrB1
--attrB2
Now populate collection of object A in NodeA and after adding element in NodeA populate respective elements in NodeB.
IPrivate<View>View.INodeANode nodeA = wdContext.NodeAnode();
for (Iterator it = collectionA.iterator(); it.hasNext(); )
ObjectA objA= it.next();
IPrivate<View>View.INodeAElement nodeAElem= nodeA.createNodeAElement();
wdCopyservice.copy Corresponding(objA,nodeAElem);
nodeA.addElement(nodeAElem);
Collection collectioB =objA.getCollectionB();
for (Iterator it1 = collectionB.iterator(); it1.hasNext(); )
ObjectB objB= it1.next();
IPrivate<View>View.INodeBNode nodeB = nodeAElem.nodeBnode();
IPrivate<View>View.INodeAElement nodeBElem= nodeB.createNodeBElement();
wdCopyservice.copy Corresponding(objB,nodeBElem);
nodeB.addElement(nodeBElem);
Bind NodeA to the first table and NodeB to second one.
After that when you select record in first table automatically its corresponding records will be populated in second table.
Hope this helps!
Monalisa
Maybe you are looking for
-
No car power adapters work!
I have have tried 3 power adapters sold at the Apple store and none work with the PowerBook G4. The saleperson was very helpful, but said that they have seen this before! (Green light comes and then it slowly blinks yellow or just stays green.) I ask
-
Panasonic SD5 and Sony CX7 - Fluid Motion or Stuttering?
So I am a backcountry skier and I've been looking for a new video camera and have narrowed it down to the Panasonic SD5 or Sony CX7 as these seem to fit my needs (high altitude use, cold environments, light weight, size, reliability and shock resista
-
Adobe Flex 2英語版 6月28日(水)より提供開始
Adobe Flex 2の詳細については以下のURLをご参照ください. http://www.adobe.com/jp/products/flex デベロッパーが直ちにリッチで表現力に富んだWebアプリケーションの構築を開始できるよう.さまざまなオンラインおよび対面による学習リソースを用意しています. http://www.adobe.com/jp/devnet/
-
PSE 8: any color correction controls like RGB as in Photoshop?
I used to have Photoshop 7 and often used the RGB controls to make color corrections. Now I have Elements 8 and I miss having RGB controls. Is there a way in PSE 8 I can simply adjust R, G, and B individually like I've been used to? If not, what is t
-
My toolbar is missing and bookmarks are missing
my toolbar and bookmarks disappeared == This happened == Not sure how often == yesterday