Regarding Amount in words
Hai Experts ,
my requirement is to convert the currency field value in words for that i am using the FM 'SPELL_AMOUNT'
but that FM didnt display the value in words after decimal point.
for example if the value s 100.50 i need to display it in words as hundred rupees fifty paise but the FM
'SPELL_AMOUNT' displayed the output as hundred rupees only
is there any FM available for converting the value in words including decimal point?
With Regards,
R.dhineshraj.
Hi, Raj
Above FM will not Sport more than two digits after decimal point if you have the requirement like this than please use the following way,
DATA: amount TYPE p DECIMALS 3 VALUE '100.504',
c_amount TYPE string,
part_1st TYPE string,
part_2nd TYPE string,
in_words TYPE spell,
amt_in_words(1000).
c_amount = amount.
SPLIT c_amount at '.' into part_1st part_2nd.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
amount = part_1st
IMPORTING
in_words = in_words.
part_1st = in_words-word.
clear: in_words.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
amount = part_2nd
IMPORTING
in_words = in_words.
part_2nd = in_words-word.
CONCATENATE part_1st 'unit1' part_2nd 'unit2' into amt_in_words SEPARATED BY space.
WRITE: / amt_in_words.
Kind Regards,
Faisal
Similar Messages
-
Print Layout : Amount in Words
Hai To All,
I customize print layout of A/P Invoice on that i have some problem:
1) there iam calculating total amount.At the bottom of my page that amount should display in words.How to do that???
2) In between repetitive Area and End of Report there is no border while taking print its not looking good.
Anyone have idea about this????
Regards,
AnithaHi Ani,
For 1st question:
1. select the that field. goto Properties
2. In General Tab u can find Link to Textbox
3. In that textbox select the field-id of the Total Amount
4. Now goto Format tab, select the Amount in words check box
This is the way u can print Amount in words.
For 2nd Question:
1. select the repetitive area in Field Index window
2. Now goto Properties Window, select the Border Tab
3. there, in low textbox, put 1.
Thanks,
Suresh Yerra -
Amount in words in SAP 8.8
Hello expert,
I want to convert the document amount in words in Indian standard and I am using the below Functions which I got from sdn and its working fine in SAP 2007 but it is giving error in SAP 8.8 and patch level is 5.........please give the feasible solution.....
1. Function to Convert one Digit Number to words.
CREATE Function dbo.fConvertDigit(@decNumber decimal)
returns varchar(6)
as
Begin
declare
@strWords varchar(6)
Select @strWords = Case @decNumber
When '1' then 'One'
When '2' then 'Two'
When '3' then 'Three'
When '4' then 'Four'
When '5' then 'Five'
When '6' then 'Six'
When '7' then 'Seven'
When '8' then 'Eight'
When '9' then 'Nine'
Else ''
end
return @strWords
end
2. Function to convert 2 digit number to words.
CREATE Function dbo.fConvertTens(@decNumber varchar(2))
returns varchar(30)
as
Begin
declare @strWords varchar(30)
--Is value between 10 and 19?
If Left(@decNumber, 1) = 1
begin
Select @strWords = Case @decNumber
When '10' then 'Ten'
When '11' then 'Eleven'
When '12' then 'Twelve'
When '13' then 'Thirteen'
When '14' then 'Fourteen'
When '15' then 'Fifteen'
When '16' then 'Sixteen'
When '17' then 'Seventeen'
When '18' then 'Eighteen'
When '19' then 'Nineteen'
end
end
else -- otherwise it's between 20 and 99.
begin
Select @strWords = Case Left(@decNumber, 1)
When '0' then ''
When '2' then 'Twenty '
When '3' then 'Thirty '
When '4' then 'Forty '
When '5' then 'Fifty '
When '6' then 'Sixty '
When '7' then 'Seventy '
When '8' then 'Eighty '
When '9' then 'Ninety '
end
Select @strWords = @strWords + dbo.fConvertDigit(Right(@decNumber, 1))
end
--Convert ones place digit.
return @strWords
end
3. Function to convert amt in numbers to words. (Built with the help of above 2 functions)
CREATE function dbo.fNumToWords (@decNumber decimal(12, 2))
returns varchar(300)
As
Begin
Declare
@strNumber varchar(100),
@strRupees varchar(200),
@strPaise varchar(100),
@strWords varchar(300),
@intIndex integer,
@intAndFlag integer
Select @strNumber = Cast(@decNumber as varchar(100))
Select @intIndex = CharIndex('.', @strNumber)
if(@decNumber>99999999.99)
BEGIN
RETURN ''
END
If @intIndex > 0
begin
Select @strPaise = dbo.fConvertTens(Right(@strNumber, Len(@strNumber) - @intIndex))
Select @strNumber = SubString(@strNumber, 1, Len(@strNumber) - 3)
If Len(@strPaise) > 0 Select @strPaise = @strPaise + ' paise'
end
Select @strRupees = ''
Select @intIndex=len(@strNumber)
Select @intAndFlag=2
while(@intIndex>0)
begin
if(@intIndex=8)
begin
Select @[email protected](left(@decNumber,1))' Crore '
Select @strNumber=substring(@strNumber,2,len(@strNumber))
Select @intIndex=@intIndex-1
end
else if(@intIndex=7)
begin
if(substring(@strNumber,1,1)='0')
begin
if substring(@strNumber,2,1)<>'0'
begin
if (@strRupees<>NULL and substring(@strNumber,3,1)='0' and substring(@strNumber,4,1)='0' and substring(@strNumber,5,1)='0' and substring(@strNumber,6,1)='0' and substring(@strNumber,7,1)='0' and @intAndFlag=2 and @strPaise=NULL)
begin
Select @strRupees=@strRupees+' and ' dbo.fConvertDigit(substring(@strNumber,2,1))' Lakh '
Select @intAndFlag=1
end
else
begin
Select @[email protected](substring(@strNumber,2,1))' Lakh '
end
Select @strNumber=substring(@strNumber,3,len(@strNumber))
Select @intIndex=@intIndex-2
end
else
begin
Select @strNumber=substring(@strNumber,3,len(@strNumber))
Select @intIndex=@intIndex-2
end
end
else
begin
if(substring(@strNumber,3,1)='0' and substring(@strNumber,4,1)='0' and substring(@strNumber,5,1)='0' and substring(@strNumber,6,1)='0' and substring(@strNumber,7,1)='0' and @intAndFlag=2 and @strPaise='')
begin
Select @strRupees=@strRupees+' and ' + dbo.fConvertTens(substring(@strNumber,1,2))+' Lakhs '
Select @intAndFlag=1
end
else
begin
Select @[email protected](substring(@strNumber,1,2))' Lakhs '
end
Select @strNumber=substring(@strNumber,3,len(@strNumber))
Select @intIndex=@intIndex-2
end
end
else if(@intIndex=6)
begin
if(substring(@strNumber,2,1)<>'0' or substring(@strNumber,3,1)<>'0' and substring(@strNumber,4,1)='0' and substring(@strNumber,5,1)='0' and substring(@strNumber,6,1)='0' and @intAndFlag=2 and @strPaise='')
begin
if len(@strRupees) <= 0
begin
if convert(int,substring(@strNumber,1,1)) = 1
begin
Select @strRupees=@strRupees+'' + dbo.fConvertDigit(substring(@strNumber,1,1))+' Lakh '
Select @intAndFlag=2
end
else
begin
Select @strRupees=@strRupees+'' + dbo.fConvertDigit(substring(@strNumber,1,1))+' Lakhs '
Select @intAndFlag=2
end
end
else
begin
if convert(int,substring(@strNumber,1,1)) = 1
begin
Select @strRupees=@strRupees+' and' + dbo.fConvertDigit(substring(@strNumber,1,1))+' Lakh '
Select @intAndFlag=1
end
else
begin
Select @strRupees=@strRupees+' and' + dbo.fConvertDigit(substring(@strNumber,1,1))+' Lakhs '
Select @intAndFlag=1
end
end
end
else
begin
if convert(int,substring(@strNumber,1,1)) = 1
begin
Select @[email protected](substring(@strNumber,1,1))' Lakh '
end
else
begin
Select @[email protected](substring(@strNumber,1,1))' Lakhs '
end
end
Select @strNumber=substring(@strNumber,2,len(@strNumber))
Select @intIndex=@intIndex-1
end
else if(@intIndex=5)
begin
if(substring(@strNumber,1,1)='0')
begin
if substring(@strNumber,2,1)<>'0'
begin
if(substring(@strNumber,3,1)='0' and substring(@strNumber,4,1)='0' and substring(@strNumber,5,1)='0' and @intAndFlag=2 and @strPaise='')
begin
Select @strRupees=@strRupees+' and ' dbo.fConvertDigit(substring(@strNumber,2,1))' Thousand '
Select @intAndFlag=1
end
else
begin
Select @[email protected](substring(@strNumber,2,1))' Thousand '
end
Select @strNumber=substring(@strNumber,3,len(@strNumber))
Select @intIndex=@intIndex-2
end
else
begin
Select @strNumber=substring(@strNumber,3,len(@strNumber))
Select @intIndex=@intIndex-2
end
end
else
begin
if(substring(@strNumber,3,1)='0' and substring(@strNumber,4,1)='0' and substring(@strNumber,5,1)='0' and @intAndFlag=2 and @strPaise='')
begin
Select @strRupees=@strRupees' and 'dbo.fConvertTens(substring(@strNumber,1,2))+' Thousand '
Select @intAndFlag=1
end
else
begin
Select @[email protected](substring(@strNumber,1,2))' Thousand '
end
Select @strNumber=substring(@strNumber,3,len(@strNumber))
Select @intIndex=@intIndex-2
end
end
else if(@intIndex=4)
begin
if ( (substring(@strNumber,3,1)<>'0' or substring(@strNumber,4,1)<>'0') and substring(@strNumber,2,1)='0' and @intAndFlag=2 and @strPaise='')
begin
Select @strRupees=@strRupees+' and' + dbo.fConvertDigit(substring(@strNumber,1,1))+' Thousand '
Select @intAndFlag=1
end
else
begin
Select @[email protected](substring(@strNumber,1,1))' Thousand '
end
Select @strNumber=substring(@strNumber,2,len(@strNumber))
Select @intIndex=@intIndex-1
end
else if(@intIndex=3)
begin
if substring(@strNumber,1,1)<>'0'
begin
Select @[email protected](substring(@strNumber,1,1))' Hundred '
Select @strNumber=substring(@strNumber,2,len(@strNumber))
if( (substring(@strNumber,1,1)<>'0' or substring(@strNumber,2,1)<>'0') and @intAndFlag=2 )
begin
Select @strRupees=@strRupees+' and '
Select @intAndFlag=1
end
Select @intIndex=@intIndex-1
end
else
begin
Select @strNumber=substring(@strNumber,2,len(@strNumber))
Select @intIndex=@intIndex-1
end
end
else if(@intIndex=2)
begin
if substring(@strNumber,1,1)<>'0'
begin
Select @strRupees=@strRupees+dbo.fConvertTens(substring(@strNumber,1,2))
Select @intIndex=@intIndex-2
end
else
begin
Select @intIndex=@intIndex-1
end
end
else if(@intIndex=1)
begin
if(@strNumber<>'0')
begin
Select @strRupees=@strRupees+dbo.fConvertDigit(@strNumber)
end
Select @intIndex=@intIndex-1
end
continue
end
if len(@strRupees)>0 Select @strRupees=@strRupees+ ' rupees '
IF(len(@strPaise)<>0)
BEGIN
if len(@strRupees)>0 Select @strRupees=@strRupees + ' and '
END
Select @strWords = IsNull(@strRupees, '') + IsNull(@strPaise, '')
select @strWords = @strWords + ' only'
Return @strWords
End
->> Create 1 UDF in Header on Requrie Documents (ex. Marketing Documents).
->> Create 3 Function in MSSQL Server Management.
->> Create 1 FMS in Query Generator and save as Query Manager then Assign to UDF for Amount in Words.
for example:
Create UDF in Header on Marketing Documents.
->> Choose Tools on Top menu.
->> User - Defined Fields. -> User Manage Fields.
->> Open the User Manage Fields Widnow.
->> Marketing Documents. -> Title.
->> Select Title and Click Add button in Bottom on User Manage Fields Window.
->> Create Amount in Words UDF(Code, Discription and Type - Character) and Add the UDF.
Create Function in MSSQL Server Management.
Check this Link, (have 3 Functions in Link).
http://techcreeze.blogspot.com/2008/11/convert-amount-into-words-according-to_15.html
1st Funciton - to Convert one Digit Number to words
2nd Funciton - to convert 2 digit number to words.
3rd Funciton - to convert amt in numbers to words.
->> Open the MSSQL Server Management Window.
->> Choose your Company database and Create NEW Query.
->> Create 3 Function Queries one by one.
->> Create 3 NEW Query Tab and 1st one put the 1st Function then Run the Function. and
2nd New Query tab put the 2nd Function then Run the Function.
3rd New Query tab put the 3rd Function then Run the Function.
Create FMS in Query Generator and Save as Query Manager.
->> Adminstration.
->> Reports. -> Query Generator.
->> Open the Query Generator and put the below FMS query.
for example : Purchase Order Doc. Toal(in wrods).
declare @Doc_total numeric (19,6)
set @Doc_total=$[OPOR.DocTotal]
select dbo.fNumToWords (@Doc_total)
->> Assign the FMS in UDF on Purchase Order.
->> Auto Refresh of Document Total.
Ex.
1. Goto the UDF and Clcik ShiftAltF2.
2. Select the SEARCH BY SAVED QUERY.
3. Assign the FMS Query.
4. Select the AUTO REFRESH WHEN FIELD CHENGES.
5. Select Document Total.
6. Check the Display Saved Values.Hi Neetu,
its not converting decimal values in paisa...
Regards
Deepak tyagi -
Converting the amount into words in different languages
Hi All,
Is there any FM to convert the amount into words in a specific language.
SPELL_AMOUNT FM is not working for some of the languages like portuguese, etc..
Any idea on this.
Thanks in Advance.Hi,
Use the FM:
CALL FUNCTION <b>'Y_AMOUNT_IN_WORDS'</b>
Hope it helps.
Reward if helpful.
Regards,
Sipra -
Wrong Conversion of Amount in Words in Purchase Order print out
Hi,
Please help me with the problem in printing of Purchase Order, there is an error in amount in words. For example the total amount in numbers is 93,311.30 however the amount in words will be nine million three hundred thirty-one thousand one hundred thirty.As per my understanding the amount in number was multiply by 100. Please help what i should check.
Thanks,
RichardDear,
Take the help of the ABAPER guy and check what he written in the program of the PO layout & printout.
http://help.sap.com/printdocu/core/print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
This will solve your problem
Thanks & regards.
Varun Bisaria
Edited by: Varun Bisaria on Oct 21, 2011 2:10 PM -
Crystal Report-Amount in Words Need correction and Delivery date.
Dear Experts,
Issue 1
In crystal reports i'm converting Amount in to words using the following formula. In that i am getting Every thing in Uppercase with - i.e. RUPEES ONE THOUSAND-FIVE HUNDRED AND .
I need in Sentence case i.e all First Letters in Capital and also want to Remove '-'
Amount in Word
numbervar RmVal:=0;
numbervar Amt:=0;
numbervar pAmt:=0;
stringvar InWords :="Rupees ";
Amt := {OPOR.DocTotal};
if Amt > 10000000 then RmVal := truncate(Amt/10000000);
if Amt = 10000000 then RmVal := 1;
if RmVal = 1 then
InWords := InWords + " " + towords(RmVal,0) + " crore"
else
if RmVal > 1 then InWords := InWords + " " + towords(RmVal,0) + " crores";
Amt := Amt - Rmval * 10000000;
if Amt > 100000 then RmVal := truncate(Amt/100000);
if Amt = 100000 then RmVal := 1;
if RmVal = 1 then
InWords := InWords + " " + towords(RmVal,0) + " lakhs"
Else
If RmVal > 1 then InWords := InWords + " " + ToWords(RmVal,0) + "Lakhs";
Amt := Amt - Rmval * 100000;
if Amt > 0 then InWords := InWords + " " + towords(truncate(Amt),0);
pAmt := (Amt - truncate(Amt)) * 100;
if pAmt > 0 then
InWords := InWords + " and " + towords(pAmt,0) + " paisa only"
else
InWords := InWords + " only";
UPPERCASE(InWords)
Issue 2.
At Delivery terms I'm using the following formula to display the delivery data. If the document date and due date is same it will print Delivery Immediate otherwise it should calculate the Delivery date from document date, but now it's printing DocDue date.
I need to calculate Delivery Date = DocDuedate - DocDate.
If {OPOR.DocDate} = {OPOR.DocDueDate} Then
"2. Delivery immediate"
Else
"2. Delivery on or before " & {OPOR.DocDueDate}
Thanks
KamalHi
Try this formula
numbervar RmVal:=0;
numbervar Amt:=0;
numbervar pAmt:=0;
stringvar InWords :="Rupees ";
Amt := {@GrandTotal} ;
if Amt > 10000000 then RmVal := truncate(Amt/10000000);
if Amt = 10000000 then RmVal := 1;
if RmVal = 1 then
InWords := InWords + " " + ProperCase (towords(RmVal,0)) + " crore"
else
if RmVal > 1 then InWords := InWords + " " + ProperCase (towords(RmVal,0)) + " crores";
Amt := Amt - Rmval * 10000000;
if Amt > 100000 then RmVal := truncate(Amt/100000);
if Amt = 100000 then RmVal := 1;
if RmVal = 1 then
InWords := InWords + " " + ProperCase (towords(RmVal,0)) + " lakhs"
Else
If RmVal > 1 then InWords := InWords + " " + ProperCase (ToWords(RmVal,0)) + " Lakhs";
Amt := Amt - Rmval * 100000;
if Amt > 0 then InWords := InWords + " " + ProperCase (towords(truncate(Amt),0));
pAmt := (Amt - truncate(Amt)) * 100;
if pAmt > 0 then
InWords := InWords + " and " + ProperCase (towords(pAmt,0)) + " paise only"
else
InWords := InWords + " only";
ProperCase(InWords)
Regards
Vivek -
Check printing: Amount in words is getting jumbled
Hi,
I have a problem in displaying amount in words in check.
I am getting the amount in words through functuion module SPELL_AMOUNT correctly,i.e,(for example,110,002 ) ONE HUNDRED TEN THOUSAND TWO.
After getting the amount,i am concatenating the words 'ONLY' amount 'RIYALS'.In program it is concatenated correctly.Expected output is RIYALS ONE HUNDRED TEN THOUSAND ONLY.
But when seen on screen,the words are getting jumbled.
It is getting displayed as TWO RIYALS ONLY ONE HUNDRED TEN THOUSAND.
(Note: My form is in arabic,since i want to display vendor name in arabic,and rest of the check in english).
Please help me with some solution.
Thanks & Regards
Seshagiri.Hi Dishant,
Sorry for the delay.I am pasting the code below:
Code in print program:
Global data:
data: gv_riyals(6) value 'RIYALS', "RIYALS
gv_only(4) value 'ONLY',
gv_halalas(7) value 'HALALAS',
gv_and(3) value 'AND'.
Local data:
data: lw_dummy(25),
lw_fraction(2), "for fraction part of amount in HALALAS
lw_integer type i.
if spell-decimal is initial.
clear: spell-decimal, dg_100.
else.
lw_integer = spell-decimal / 10.
lw_fraction = lw_integer.
concatenate '(' lw_fraction '/100)'
into lw_dummy. " SEPARATED BY space.
condense lw_dummy.
clear dg_100.
dg_100 = lw_dummy.
if not spell-word is initial.
condense spell-word.
gv_spell_word(50) = spell-word. "Amount in RIYALS
endif.
endif.
call function 'WRITE_FORM'
exporting
window = 'PAY_DOC'
element = 'PAY_DOC'
exceptions
window = 1
element = 2.
if sy-subrc eq 2 and
( err_element-fname ne t042e-zforn
or err_element-fenst ne 'PAY_DOC'
or err_element-elemt ne 'PAY_DOC' ).
err_element-fname = t042e-zforn.
err_element-fenst = 'PAY_DOC'.
err_element-elemt = 'PAY_DOC'.
err_element-text = text_530.
*--Code in the script:
/: IF &DG_100& EQ ' '
L1 &gv_only(C)&,,&gv_riyals(C)&,,&spell-word&
/: ELSE
L1 &gv_riyals(C)&,,&gv_spell_word(C)&
L1 &gv_only(C)&,,&gv_halalas(C)&,,&dg_100(C)&,,&gv_and(C)&
/: ENDIF
Thanks & Regards
Seshagiri. -
How to display amount in words for subtotal value?
Hi All,
I am diplaying a amount in words for sub-total value after each document number.
Can any one suggest how to display text for sub-total value not for Grand total?
I want subtotal at each material for each document number and want to display that subtotal amount in words.
Thanks and Regards
SteveThanks Jorge ,
Is it possible in ALV printing Sut-total text by adding a new line .?
And where to insert At new or on-chane ?
Sub-total calculating automatically not programaticall..
Regards
Steve -
Excise duty payable amount in words
hi kings
I show the tax amount split in pld's .but our customers need to show the amount in words when Excise duty comes.but when using group the value store in single variable how i show the amount in words excise duty only
Thanks & Best Regards
B.Lakshmi NarayananBy grouping u can't get excise duty,which can be displayed in words using PLD,
Better use Crystal reports to acheive this. -
Function Module to convert amount to amount in words
Dear Guru ,
I want to know is there any sap standard Function Module to convert amount value to amount in words
Thanks & RegardsHi..
Use FM SPELL_AMOUNT.
This function module converts an amount or number into words. It can be used as follows:
Convert a number into words
To do this, the transfer parameters LANGUAGE and AMOUNT have to be entered.
Convert an amount into words
To do this, the fields LANGUAGE, CURRENCY, and AMOUNT have to be entered.
Program RF_SPELL contains a sample call of the function module. You can use it for test purposes.
REPORT ZSPELL.
TABLES SPELL.
DATA : T_SPELL LIKE SPELL OCCURS 0 WITH HEADER LINE.
DATA : PAMOUNT LIKE SPELL-NUMBER VALUE '1234510'.
SY-TITLE = 'SPELLING NUMBER'.
PERFORM SPELL_AMOUNT USING PAMOUNT 'USD'.
WRITE: 'NUMBERS', T_SPELL-WORD, 'DECIMALS ', T_SPELL-DECWORD.
FORM SPELL_AMOUNT USING PWRBTR PWAERS.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
AMOUNT = PAMOUNT
CURRENCY = PWAERS
FILLER = SPACE
LANGUAGE = 'E'
IMPORTING
IN_WORDS = T_SPELL
EXCEPTIONS
NOT_FOUND = 1
TOO_LARGE = 2
OTHERS = 3.
ENDFORM. " SPELL_AMOUNT
I hope it helps.
Reward pts if helpful
Regards
- Rishika Bawa -
HI All,
I need to convert the amount into words in my smartforms.
How is this achieved?
Thanks & Regards,
MurthyHi kan murthy ,
let say in sf the amount is sf_amt...
*Declare varibles in SF like this in global
data: v_word type spell, "structure
v_amt type string.
*Calling Function SPELL_AMOUNT in Program Lines
and Import parameters are V_AMT and Export Parameters are
*V_WORD
call function 'SPELL_AMOUNT'
exporting
amount = v_amt
currency = 'INR'
language = sy-langu
importing
in_words = v_word
exceptions
not_found = 1
too_large = 2
others = 3.
Use V_WORD Where need to print
Regards,
sg -
Reg: Convert amount in values to amount in words
Dear All,
Want to convert amount value into words and it will displays on UDF which is created in Marketing document. How can i do that.
Plese help me
Thanks & Regards
Venkatesh NHi,
Check Re: Amount in Words in INR for solution.
Create function in SQL and then apply FMS to get that function in udf.
Thanks,
Neetu -
Hi All,
I am working on Sales Excise Invoice PLD, where the client wants the Tax amounts ( BED, Cess, HScess) to be displayed in words.
How to do this.Hi,
check formet tab on layout properties window.There is a checkbox "Amount in words"..Tick this box..
Regards
Deepak Tyagi -
Convert Amount in Numbers into Amount in Words
Hello everyone,
I am tasked to draft format for our company's check printing layout using Numbers/Pages, I already did but since the existing format was just manual inputted by the users, it always resulting to typographical errors on our printed checks, particularly the 'amount in words'. May I please ask for anybody's help on how to to do this automatically:
Amount in Figure
Amount in Words
1,500.50
ONE THOUSAND FIVE HUNDRED AND 50/100
Thanks and best regards,
DirekRodTry this website I found:
http://www.easysurf.cc/cnvert18.htm
http://javascript.about.com/library/bltoword.htm?inum=345.76&rnum=
I will look at how to use an Applescript to perform the conversion but I cannot get to it right now. -
(v urgent) converting amount in figures to amount in words ina spec languag
Hi All,
I have a requirement like i need to convert amount i n figures to amount in words, and that too for a specific language (eg., portuguese and not english) . This needs to be done in the SAPSCRIPT and not in the program as the program is a standard one.
Please help me out as it is v urgent.
Regards,
PriyaUse FM
HR_IN_CHG_INR_WRDS
Award points if answer is useful
tc
saji
Maybe you are looking for
-
Clearing of Vendor against a Customer
Hi I have a client requirement where in I have a vendor who supplies my client the raw material and the same is processed by the client to sell back to the same vendor as customer. Is it possible to settle the payabale for the vendor against the reci
-
I've seen similar questions asked all over the web, but so far not a single "real" answer has cropped up, so hopefully you folks will know the way to do this. I have a main view that with a UIView subview, inside of which I am programmatically adding
-
The sites I make with iWeb don't work well on Windows!
I've made a site with iWeb 08 and it works fine with Safari, and at times with Firefox. However, it has some "glitches" when you use Internet Explorer on a Windows based computer. Especially the "Search" button. Has anyone noticed this? Is there a fi
-
Safari wish list for another Firefox user
1. Implement forward and back paging with the mouse buttons. I get tired of mousing up to the top buttons or trying to remember the shorcuts. This seems to work in the help pages but not with websites. 2. Bookmarks that work via the menu like in fire
-
Hi Is thr any t code for mass vendor master change? Vijay Edited by: Vijay on Nov 17, 2008 6:19 PM