Regarding an Error in eCATT

Hi Experts...
I am new to eCATT and have jus begun using it.
While creating a Sample Test Script, After entering the component (I wanted to record the trasaction for Maintaining Opprtunuites on CRM4.0), even before I started to record the transaction, When i execute the test script I get an error which says,
Parser: No Script Text exists.

Hi Ram,
1.> First of all check if scripting is enabled in front end. Please follow the steps below to enable scripting:
The SAP GUI Scripting component is installed. There is an option for installing this component when installing the SAP GUI.
Procedure
       1.      On any screen, choose Customizing of local layout.
       2.      Choose Options....
       3.      Choose the Scripting tab.
       4.      Select Enable Scripting.
       5.      Choose Apply.
2.> Please clarify the sentence that you have written "even before I started to record the transaction, When i execute the test script I get an error..." what exactly do you mean by that.
3.> Which mode of recording you are using TCD or SAPGUI ?

Similar Messages

Error in eCATT command TCD SU01

Dear All,
I am getting an error while working with eCATT in one of our test servers.
I am getting some errors while executing the Test Script (for creating multiple users).
Error Messages -
Error in eCATT command TCD SU01
No batch input data for screen SAPLSUU5 0050
I have done all the pre-requisites needed for eCATT script enabling.
Please suggest as soon as possible.
Points will be definitely rewarded.
It's very very urgent.
Thanks & Regards,
Sameer

Hello Sameer
Screen '0050' of function group SUU5 is the SU01 initial screen for user maintenance where you enter the user name.
If you get a batch-input error there are several possible explanations:
1. You want to create a new user but the eCATT data do not have a username
2. You want to create a new user but a user with the username does already exist
3. You want to change an existing user but the eCATT data do not have a username
4. You want to change an existing user but the user was locked by somebody else.
Conclusion: If you are very confident about the quality of your testscript then you have to search the error in your eCATT data.
Before executing command TCD 'SU01' do you check whether a user with the username of the eCATT data does exist or not? Obviously you need two different testscripts for this two scenarios.
There might also be a server specific reason. For example, if your suspicious test server is a daughter system of the CUA then you are no longer allowed to create users locally on this system.
Regards
Uwe

I can't log in to game centre but I can log into iTunes. I recently changed my password. I checked the troubleshooter and am getting the message regarding server error but how do I fix this? It doesn't specify this in that article. I don't have firewalls

I can't log in to game centre but I can log into iTunes. I recently changed my password. I checked the troubleshooter and am getting the message regarding server error but how do I fix this? It doesn't specify this in that article. I don't have firewalls

Hello sadiepix,
The following article details several things that can be done to quell iTunes' constant need for authorization.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Allen

Error Logging and notifying users regarding the errors

Hi..
we are designing a workflow in which if any user comes across an error (at any branch or while executing an action) must be alerted with the error and must send a notification to the admin that the process has stalled at that particular part of the workflow due to some error.
my doubts are
1.how can we notify the admin and the initiator of the workflow regarding the error a particular user gets.i saw in adminui that there are two tabs for the admin to view the stalled actions/stalled branches.but the admin and the user needs to be notified with an alert or email that a particular action has been stalled.
i think i conveyed my problem in a correct manner.if its confusing then plz tell me coz i am already confused in this..

Thank you sir for your immediate response of the query.
In the workflow which we are designing,a service request from filled by the user will be routed to the particular approver and he inturn will approve/reject the form accordingly.once he approves,the form is routed to the service provider who will fulfill the service requested and approved.
1.Now,for instance suppose that the workflow gets stalled while the form is with the approver.my question is how to notify the user that the service he requested is delayed due to the stalling of the process in between as well as the admin alerting him with the error which stalled the workflow process.
2.you said that it is easy to setup an email address within the adminui..but i dont know how to do that as i am a beginner.
3.Also u asked me to specify the errors for which we need to send alerts and email notifications...whatever error that occurs whenever the workflow gets staleld needs to be notified both to the user and the admin (as per our requirements).it would be helpful to us if u give a solution for this.
thank you..
Raghava Kumar V.S.S.

How do we contact a real person regarding billing errors?

How do we contact a real person regarding billing errors on our itunes account?

You can contact iTunes support via email via this page (I'm not aware of any phone support for iTunes) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Error on ECATT

Hello,
Does anybody know how can I execute an Ecatt correclty???
Im geeting the following error:
Error in eCATT function CHEGUI
Error when starting procesing mode; possible causes: 1. Scripting deactivated in procesing system 2. User not logged with in 00:00:20 hour(s) or has not dialog rigths 3. Too many sessions open.
I´ve checked all three but for me everything is ok....any ideas??
<REMOVED BY MODERATOR>
Thanks
Gabriel P
Edited by: Alvaro Tejada Galindo on Apr 23, 2008 5:51 PM

Hi Gabriel ,
I can suggest you what i know about Ecatt: just go throught the my below notes, hope u will find a solution.
eCATT (extended Computer Aided Test Tool - BC-TWB-TST-ECA) (which superceded CATT as of Web Application Server Release 6.40) SAP supplies free as part of the R/3 system to document manual user dialog steps and to record, edit, and execute automated functional test cases without user dialog.
eCATT can be used with the Test Workbench.
Transactions executed through eCATT require the same authorizations as manual operation by a live person, so eCATT can be used to verify user profiles.
In principle, the entire ABAP instruction set is available for use within inline ABAP code (CREATE, CALL, DATA, SUBMIT, etc.).
eCATT stores its data in R/3 databases and can be controlled Test Workbench, the Object Navigator (SE80), or externally through the BC-eCATT interface.
Test modules can refer to spreadsheets providing various data that are updated in CATT Maintenance mode.
Logs are created while test modules run.
However, eCATT is less suited for testing lists and display results, menu paths, online help (F1, F4), free-form editor functions, and transactions that contain the statement LEAVE TO TRANSACTION
hope it works.
reward if helpful
thanks,
abdul.

Error in ECATT

Hi all,
I am working on ECATT. While trying to record the transaction, I am getting a pop up stating that "SAP FRONTEND ERROR. Erroneous Data received. Application may not work correctly". After this, I couldnt record the trancactions.
Is it related to settings or due to authorisation issue?
Solutions please.
Thanks in Advance.
Vijayakumar.G

Hi,
The version is not supporting the ECATT tool.So,please check the correct version and install it and test it..
Regards,
Shiva Kumar

I am getting errors in ECATT

Hi,
I have prepared a Test case through SECATT transaction. I am able upload the record into SAP through eCATT. But I need to give the values for each and every record. If I'll not give any value for a non mondatory field also, it is giving me the error message.
Could anybody help me regarding this.
Thanks,
bsv.

Hi bbsv,
Extended Computer Aided Test Tool (eCATT) to create and execute functional tests for software. The primary aim is the automatic testing of SAP business processes. Each test generates a detailed log that documents the test process and results.
Features
You can:
· Test transactions and reports
· Call BAPIs and function modules
· Test remote systems
· Check authorizations (user profiles)
· Test database updates
· Test the effects of changes to customizing tables
· Test the effect of changes to customizing settings
· Check system messages
Constraints
eCATT runs in a system based on SAP Web Application Server 6.20 or higher. However, you can use this system to test systems with Release 4.6C or higher.
check these link,
eCATT- An Introduction
/people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
Creating Test Scripts
/people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
eCATT Logs
/people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
eCATT Scripts Creation TCD Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
Creation of Test Data Container
/people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
eCATT Scripts Creation - SAPGUI Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
Integrating ECATT & MERCURY QTP Part -1
/people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
Using eCatt to Test Web Dynpro ABAP
/people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
and
-command reference
http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
/people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
http://prasadbabu.blogspot.com
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
http://www.erpgenie.com/ecatt/index.htm
kindly reward if found helpful.
cheers,
Hema.

Error During ECATT test script creation

Hi,
I am creating test script using SECATT t.cde. I select traget system and click on Pattern Button and provide input as follow.
Group : UI Control
Command : TCD (Record)
Transaction : MM02
When I click continue button, I am getting error "Transaction MM02 could not be found in Target System".
I had check my RFC Configuration, its working properly.
Please help me to solve this issue.
Regards,
Nisit

Not sure what exactly you're asking, but here is a "how-to" article on eCATT creation:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50bec015-14f1-2910-6080-9874b3499052

'SESSION_MANAGER' error in ecatt

Hi ,
I am trying to record a transaction in SAPGUI mode ,then I select 'pattern' then 'SAPGUI record'
then give the granuality then when I press the 'start recording' button I am getting the following
message
Error in target system: User does not have
authorization for transaction SESSION_MANAGER or
transaction does not exist in target system
I am using target system as none
any idea how to resolve this .

Hello Sameer
Screen '0050' of function group SUU5 is the SU01 initial screen for user maintenance where you enter the user name.
If you get a batch-input error there are several possible explanations:
1. You want to create a new user but the eCATT data do not have a username
2. You want to create a new user but a user with the username does already exist
3. You want to change an existing user but the eCATT data do not have a username
4. You want to change an existing user but the user was locked by somebody else.
Conclusion: If you are very confident about the quality of your testscript then you have to search the error in your eCATT data.
Before executing command TCD 'SU01' do you check whether a user with the username of the eCATT data does exist or not? Obviously you need two different testscripts for this two scenarios.
There might also be a server specific reason. For example, if your suspicious test server is a daughter system of the CUA then you are no longer allowed to create users locally on this system.
Regards
Uwe

Regarding runtime error DBIF_RSQL_SQL_ERROR and exception CX_SY_OPEN_SQL_DB

Hi All,
I am loading a COPA cube from a DSO.
There are about 15million records to be loaded. every time i try loading the data, 1 or 2 Data packages gets stuck and finally it leads to a runtime error DBIF_RSQL_SQL_ERROR with exception CX_SY_OPEN_SQL_DB.
When i checked in SM21 transaction code, i got the following message
10:41:52 BTC 018 500 AMRUKV                     BY O Deadlock occurred
10:41:53 BTC 018 500 AMRUKV                     BY 4 Database error 60 at INS access to table /BIC/FCSDV
10:41:53 BTC 018 500 AMRUKV                     BY 0 > ORA-00060: deadlock detected while waiting for resource
10:41:54 BTC 018 500 AMRUKV                     AB 0 Run-time error "DBIF_RSQL_SQL_ERROR" occurred
10:41:58 BTC 018 500 AMRUKV                     AB 1 > Short dump "080818 104154 s0173bel PB100 " generated
10:41:58 BTC 018 500 AMRUKV                     D0 1 Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20080818104154s0173bel_PB1_00 AMRUKV 500 )
In transaction code ST22 i got the following message:
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          18.08.2008 10:41:54
Short text
     SQL error in the database when accessing a table.
What happened?
     The database system detected a deadlock and avoided it by rolling back
     your transaction.
What can you do?
     If possible (and necessary), repeat the last database transaction in the
      hope that locking the object will not result in another deadlock.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in procedure "WRITE_ICFACT" "(FORM)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The database system recognized that your last operation on the database
     would have led to a deadlock.
     Therefore, your transaction was rolled back
     to avoid this.
     ORACLE always terminates any transaction that would result in deadlock.
     The other transactions involved in this potential deadlock
     are not affected by the termination.
How to correct the error
    Database error text........: "ORA-00060: deadlock detected while waiting for
     resource"
    Internal call code.........: "[RSQL/INSR//BIC/FCSDVD_C02 ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "GPD3UMZD6V4YAKZAIWAOCYLV07Y" or "GPD3UMZD6V4YAKZAIWAOCYLV07Y"
    "WRITE_ICFACT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "WRITE_ICFACT" "(FORM)", or its possible occurrence must be declared in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
Can anybody suggest on what can be done?
Thanks in Advance,
Regards
A.T

Hi ,
This is a table space issue....
u will be getting a Dump...as DBIF_RSQL_SQL_ERROR check in ST22. in this DUMP if u scroll down u will find the table for which this is failing. Actually this is like some of the table related to the DSO is not having sufficient space to cary out the transaction. hence it is failing.
U can also see in DB02--> Deadlock....u will see that there is a deadlock for this table. So find the table from ST22 and ask ur basis team to increase the space for this table....
This can be solved only by increasing the space of the table...no other solution....ask help from ur basis team.
Thanks
Sandeep

Regarding the error ORA-01841: (full) year must be between -4713 and +9999,

The issue is the code is not inserting the good records into the MIE table. This is becasue of the error 'OtherError GFSTM_INS_SNURK_NEW_TABLES_PA.gfstm_ins_asn_journal_pr:ORA-01841: (full) year must be between -4713 and +9999, and not be 0' This error is throwing out because of space issue in dt_asn_shipped.
My requirement is to log error if any if not get the next record in the loop and insert it in the table if it has no error. The issue is good records are not getting inserted. The snurk_cmms_crct018_asn_journl in the cursor is a synonym which uses dblionk to connect to the remote db. The dt_asn_shipped data type is char(6) and the format is YYMMDD.
declare
CURSOR cur_asn_journal IS
SELECT NVL(TRIM(cd_asn_plant),' ') cd_asn_plant,
     NVL(TRIM(no_journal),0) no_journal,
NVL(TRIM(cd_ship_from),' ') cd_ship_from,
     TRIM(no_asn) no_asn,
DECODE(LENGTH(dt_asn_shipped),6, to_date(to_char(to_date(trim(dt_asn_shipped),'YYMMDD'),
'DD-MON-YY'),'DD-MON-YY'), '') dt_asn_shipped,
TRIM(dt_processed) dt_processed,
TRIM(in_manual) in_manual,
     TRIM(ts_last_update) ts_last_update
FROM snurk_cmms_crct018_asn_journl;
BEGIN
FOR l_rec_asn_journal IN cur_asn_journal LOOP
BEGIN
INSERT INTO gfstmie_st_cmms_asn_journal
gsdb_site_code ,
journal_num,
gsdb_site_from_code,
adv_shipping_notice_cnum,
adv_sn_shipping_date,
processed_date,
manual_in_code,
cmms_last_update_cdate,
create_userid,
create_dts,
update_userid,
update_dts
) VALUES
l_rec_asn_journal.cd_asn_plant,
l_rec_asn_journal.no_journal,
l_rec_asn_journal.cd_ship_from,
l_rec_asn_journal.no_asn,
l_rec_asn_journal.dt_asn_shipped,
l_rec_asn_journal.dt_processed,
l_rec_asn_journal.in_manual,
l_rec_asn_journal.ts_last_update,
g_con_user_id,
     l_dts_current_gmt,
g_con_user_id,
l_dts_current_gmt
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('l_num_exception_pt_7');
--To assign value to error attributes
l_str_email_body := GFSTU_MSG_CONTEXT_STACKER_PA.gfstu_add_msg_context_fn(
SQLERRM || l_str_process_track,
g_con_package_name || l_con_proc_name,
g_con_string_null);
l_rec_apm_error_attributes.job_run_sakey := l_num_job_run_id;
l_rec_apm_error_attributes.proj_acronym_code := GFSTM_PARM_SPECIFICATION_PA.g_con_proj_acronym_code_ta;
l_rec_apm_error_attributes.module_code := l_con_module_code;
l_rec_apm_error_attributes.notes_text := l_str_email_body;
l_rec_apm_error_attributes.msg_id := GFSTM_PARM_SPECIFICATION_PA.g_con_msg_id_invalid_date;
--Calling procedure to log and notify subscribers of transaction
--related errors and informational messages
GFSTM_COMMON_UTL_PA.gfstm_log_message_pr(
SUBSTR(l_str_email_body,1,2000),
g_con_string_null,
g_con_string_null,
SUBSTR(l_str_email_body,1,2000),
l_rec_apm_error_attributes,
g_con_string_null,
l_num_wait_time,
l_num_wait_interval_time,
l_str_msg_action_code,
l_num_oracle_error_code,
l_str_oracle_msg,
l_num_return_code,
l_num_status);
END;
END LOOP;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('l_num_exception_pt_12');
DBMS_OUTPUT.PUT_LINE('l_num_exception_pt_2 '||l_str_procg_mode_code);
--Rollback uncommitted transactions
ROLLBACK;
--Assigning failure status
o_num_status := g_con_status_failure;
--Assigning procedure end time in GMT
l_dts_end_time := GFSTU_DATETIME_UTILITIES_PA.gfstu_to_gmt_fn;
--To assign value to error attributes
l_str_email_body := GFSTU_MSG_CONTEXT_STACKER_PA.gfstu_add_msg_context_fn(
SQLERRM || l_str_process_track,
g_con_package_name || l_con_proc_name,
g_con_string_null);
l_rec_apm_error_attributes.job_run_sakey := l_num_job_run_id;
l_rec_apm_error_attributes.proj_acronym_code := GFSTM_PARM_SPECIFICATION_PA.g_con_proj_acronym_code_ta;
l_rec_apm_error_attributes.module_code := l_con_module_code;
l_rec_apm_error_attributes.notes_text := l_str_email_body;
l_rec_apm_error_attributes.msg_id := GFSTM_PARM_SPECIFICATION_PA.g_con_msg_id_oracle;
--Calling procedure to log and notify subscribers of transaction
--related errors and informational messages
GFSTM_COMMON_UTL_PA.gfstm_log_message_pr(
SUBSTR(l_str_email_body,1,2000),
g_con_string_null,
g_con_string_null,
SUBSTR(l_str_email_body,1,2000),
l_rec_apm_error_attributes,
g_con_string_null,
l_num_wait_time,
l_num_wait_interval_time,
l_str_msg_action_code,
l_num_oracle_error_code,
l_str_oracle_msg,
l_num_return_code,
l_num_status);
--Calling procedure to update the job status
GFSTM_COMMON_UTL_PA.gfstm_update_job_status_pr(
l_num_job_run_id,
GFSTM_PARM_SPECIFICATION_PA.g_con_process_abort,
l_dts_end_time,
g_con_perf_metric_code,
g_con_zero,
g_con_n,
l_num_oracle_error_code,
l_str_oracle_msg,
l_num_return_code,
l_num_status);
END ;
Thanks,
Vinodh

Hi,
Could you not have reduced your question to what is relevant?
You seem to be saying that this is your problem:
SELECT DECODE ( LENGTH (dt_asn_shipped),
          6,
          TO_DATE ( TO_CHAR ( TO_DATE ( TRIM (dt_asn_shipped), 'YYMMDD'), 'DD-MON-YY'), 'DD-MON-YY'),
         dt_asn_shipped
FROM   snurk_cmms_crct018_asn_journl;As far as I can see, problem might be that you decode on UNTRIMMED length.
Also, you could get rid of some the to_date(to_char(to_date), which is nothing more than simply to_date()
Try something like
SELECT CASE LENGTH (TRIM (dt_asn_shipped))
         WHEN 6 THEN TO_DATE ( TRIM (dt_asn_shipped), 'YYMMDD')
       END
         dt_asn_shipped
FROM   snurk_cmms_crct018_asn_journl;Regards
Peter

Regarding: Scheduling error

HI All.
while doing the scheduling aggreement, i got the following error.
Therre are no import data available and canot be proccess.
Thanks
Regards
siva

Check into the Material master,Inforecord with the combination did you maintain the Import data.

Regarding Transport Error

Hi All,
We have created a Z Cube which is getting data from 0FI_GL_4 InfoSoucre. This is the common infosource for 0FIAP_O03, 0FIAR_O03, 0FITX_O03. All these cubes are having data in Prodution client. Now when I tested Data loading in Dev for my Z cube, I got error regarding alpha conversion. So I enabled alpha conversion in Transfer Rules and reloaded data. The data loaded perfectly. Now when i transported the model to production, my transport request failed. The reason is
(1)InfoObject 0REF_DOC_NO still used in ODS object 0FIAP_O03 (contains data), 0FIAR_O03, 0FITX_O03.
(2)Characteristic 0REF_DOC_NO cannot be activated.
One solution for it will be to delete data in those ODS in prod then transport the active version of InfoObject from Dev to Prod and then retransport my Zcube. But for this I have to delete data from production. Is there any work around for it?????
Regards
Jay

Hi Jayanta,
Have you changed the conversion routine at the info-object level / you just activated the conversion routine in the IS? If it is only activated in IS level then you should not have received such error message. I am assuming you have changed the property of the info-object.
Can you use a different info-object instead ? If not then i don't really see there is any work around. It is generally a problem whenever there is a change in the conversion routine of the info-objects and transported to production that contains data without conversion.
You need to take a copy of the production data before deletion.
Thanks
Soumya

Regarding an error in Dynamic action for hiring

Hi Experts,
when i perform a hiring action"AA" for action type "02" or "01" using a dynamic action .it is throwiing an error.
" perform not found" "CX_SY_DYN_CALL_ILLEGAL_FORM"
"MP000000" OR " MPPERS00"
"MEASURE"
please let me know how to proceed .
regards
Vishnu

Hi Vishnu,
this might just give you a clue and as suggested by our mate,you may need to debug it and see the code.
PERFORM_NOT_FOUND short dump
http://help.sap.com/abapdocu_70/en/ABAPPERFORM_GENERAL.htm
No Worries
KG
Edited by: SAPenjoy:) on Sep 6, 2010 8:44 AM

Regarding an Error in eCATT

Similar Messages

Maybe you are looking for