Regarding an error in payroll simulation
hi everybody,
Iam getting an error like"Enter rate INR/EUR rate type M for 01.01.2007 in the system setting"
please reply as soon as possible its urgent.
regards,
Hema
Hi,
Table t510f has currency settings.
Chek v_t510f_b as well.
Regards,
RR
Similar Messages
-
Hi All,
Am getting an error while running simulation for payroll.
Error message:Error while deriving the currency from table T001P , Error during intialisation of payroll.
I have checked in all tables.
Please find me a solution.
Suitable points will be rewarded.
Regards,
RaghuHi,
Found some similar thread.It might be useful.
payroll - Error while deriving the currency from table T001P
Manoj. -
Error in payroll simulation rgdir already contains an entry with the same l
hi all
please help am having a problem when running a payroll simulation which says rgdir already contains an entry with the same logical key even when i run the correcting report i still encounter the same program
thnxDid you try to run SAP program to rebuild payroll directory RPUDIR00, as sometime this gets corrupted ?
-
Error - While running Payroll Simulation After HR Patch Update
Dear Gurus,
Below is the system Information
OS : AIX
DB : Oracle 10 g
Current Patch Level : HR : SAPKE60471 (Old was SAPKE60453)
Basis Patch Level : SAPKB70115 (Old was SAPKB008)
Now at old patch level payroll simulation was running fine and with no problem.
We update patches related to HR & Basis.
After that we are getting error in simulation of payroll which is attached here with.
Please let me have any solution.
This is our quality server. We apply patch for calculation tax rebate of Rs. 2000 for employees earning less then 500000 INR / year.Hi Irin,
The error says there is not entry in table V_T511K for country grouping 40 for Constant "S80EM"
Employee contribution % NPS.
All you need to do is
Go to V_T511K -> Country Grouping 40-> Create a Constant S80EM- and enter the constant value in the last column-> Run the payroll again.
Regards,
Hari -
Run time error while running payroll simulation
Dear All SAP HR experts,
I am getting an error in QA Server, This occurs whenever I run payroll simulation for an employees getting an error dump i.e .."TABLE_FREE_IN_LOOP" . The transaction code for which I am getting error is PC00_M40_CALC_SIMU.
Attached is the dump for reference.
Trigger Location of Runtime Error
Program SAPLRPIB
Include LRPIBU01
Row 165
Module type (FUNCTION)
Module Name RP_FILL_WAGE_TYPE_TABLE
Please help in this regard.
Thanks
Srinifunction module RP_FILL_WAGE_TYPE_TABLE
is generally used for reading the wage type assigned for indirect valuation (INVAL A,B,C,D)
check whether you are using any Z function in your payroll schema which might be giving problem
Also check with your basis guys whether QA server has any memory issues.
Regards
Sumit Pradhan. -
Off Cycle Payroll error - not encountered during Payroll Simulation
Hello,
We've modified the Canadian payroll schema K000 by creating some new subschemas, rules and payroll operations to address calculation of the factor /801. When running payroll simulation for a test employee, everything looks fine. However when we run off cycle payroll for the same employee and period, we are encountering an error. Checking the log of off cycle, it shows that it is also accessing schema K000.
What could have caused the OC error? is there a difference in what off cycle and simulation accesses?
Thanks.
Malou NaveraI assume that you copied the K000 and create a new custom schema called ZK00 or YK00 or something else other than K000.
Go to this table V_T52OCV and set up an entry with
CALC RPCALCK0 PayrollVariantName
"PayrollVariantName" is your variant with your custom schema for RPCALCK0.
Or goto IMG
Payroll: Canada
Off-Cycle Activities
Set up report variants for off-cycle activities
Edited by: Amosha on Oct 4, 2011 9:30 AM -
Error in payroll log simulation INP6*****0 *
sir i have got a error massage during payroll simulation.
not found rule in the key INP6*****0 *Calculation rule UNAM accepts or rejects a cost center assignment from
infotype 0221 (Manual Check).
Access
P0221 UNAM GEN NOAB
Procedure
In infotype 0221 you can make a cost center assignment. Since this
assignment takes place on infotype rather than wage type level, this
calculation rule can be used to make an assignment for specific wage
types. This is done by querying processing class 82. A specification of
1 means that the alternative cost center assignment is accepted for the
wage type in question. Specification 2 means the assignment is ignored. -
HR Forms Issue - Payroll Simulation
Hi all,
I have requirement to run HR Forms through payroll simulation.
When I run for certain scenario, at a time 9 periods are processed as below.
Each period is generating 1 HR Form each, totally 9 HR Forms are generated.
In the Form Interface, I have taken selection screen period and done all the calculations.
As I am taking the selection screen period, I am getting the 9 HR Forms with same data instead of getting different data for each period.
How can I modify my HR Form, so that I can get period relevant data?At last the problem is resolved by myself.
In order to get the period relevant data, we need to filter the tables in the context area of the adobe forms part in the HR Forms with the for period date.
Regards,
Naveen Maroju -
HR payroll simulation in closed periods
Hi everybody,
Does anyone know of a method to enable HR payroll simulation in periods, which are closed in FI transaction OB52?
Kind regards,
Karsten NorsHi Hugo,
Save you are payroll log with some Variant and Maintain the Feature "PM004"
The return value of this feature is "01/your Variant"
with you will be getting one Pushbutton in IT0008, if you click on that you will be able to see your payroll simulation for IT0008
Regards
<u><i><b>Anil.C</b></i></u>
<i><b>Reward the full points if my answer helps you out.</b></i> -
Hi SAP Experts
we have applied new HRSPS and we are testing it in QA server.i have the following errors in the payroll log,please i request you to give me some suggestions.I have this error for a payroll area XX
1) STOP: Enhancement to variable key is missing ZZCC****** DVALEN 1 POUTWPCOSTC. "CH=ECK MASTER= COST CENT=ER = =
00006575 Roberts Jason
2)I have other error for payroll area YY
No Entry in Table 512W for key 07 5515 for time 10/31/2006
00007296 claudia jeans
please help me
regards
sangitha reddyHi ..
The STOP error in the payroll log is a critical error. Can you give me some more details on this.
The second error is missing configuration in the Wage type evaluation table. Make sure you have the configuration in place before you run the Payroll.
Hope this helps. If so reward.
Thanks
shyam -
Experts,
when i am running payroll simulation an error coming as this
customizing error in work schedule rule
what to do?GENPS
This error comes form GENPS
>Generation of Periodic work Schedule form XT00 Time Data
Compare the dats of
Holiday Calendar
DWS
DWSR
and Grouping of all these settings in V_T508A
Do it slowly -
Termination in operation Error in Payroll log
Hi Experts,
I am getting this error in Payroll log
Termination in operation ERROR
20141202
UNE1********* < ERROR NEG YTD IN TCRT NOT ALLOWED
Basic entry in IT :
/416 showing amount 9.50-
Please let me know how to resolve this issue.Hi,
You normally face such problem when empployee is moved from one tax authority to other.
Root cause of problem may be BTXRATE table is not maintaned properly.
Please refer to this document.
http://wiki.scn.sap.com/wiki/display/ERPHCM/Error+message+UNE1+ERROR+NEG+YTD+IN+TCRT+NOT+ALLOWED
Hope it will solve your problem.
Please keep us posted and once problem is resolved mark the answer correct to complete thread.
Regards,
Jignya -
Hi experts,
Please let me know the cause for the error in payroll log for an employee evrytime his payroll is run.
Error is "no cumulation for quota type 01". Why such messages creeps in?
Regards,
VeenaHi,
Could u please elaborate the issue little more ?
The issue seems to be related to absences quota assigned to the employee in Absence Quotas & attendance Quotas, check Infotype 2005 & 2006...whether proper quotas have been assigned to the employee.....rectify it and then run the payroll and check.
regards
Srijit R M -
PY : Need to run a custom HR Form in Payroll Simulation
Hi Experts,
I need to run a custom HR Form in Payroll Simulation for India PY ( PC00_M40_CALC_SIMU ) . The default form is IN01, how do i change that to my Custom Form. Plz help.
Thanks and Regards,
VishwasHi go to TC pe51,
Select form IN01 & Copy the form.
MHPO -
Taxes PCR not entered during Payroll SImulation
Dear Experts,
i created a taxes PCR, and when i run payroll simulation, in the log tree, the PCR exists but it is not processed for the wage types, and so no results come out of it !!
i have put it right before XNA9, and tried different locations in the schema, but yet nothing changed in the processing.
in the PCR i have used the results table (Amt+E XXXX, and ADDWTEXXXX )
and declared the PRC as PRT in the schema
i also tried to process the internal table (ADDWSIXXXX)
and declared it as PIT but nothing happens either.
Any suggestions ?!!
and could that have anything to do with the wage types processing classes ?!
Thanks in advanceHi Rovanna:
Have you used GEN in parameter 2 and NOAB in parameter 3 of your PIT call?
Let us know if that helps, otherwise share the code of your PCR, so it is easier to help you
Best regards,
Federico.
Maybe you are looking for
-
IPhone applications no longer work
I have had my iPhone for over a year and never had the troubles I am having now. I have installed dozens of apps and have the same update problem as all of you in this discussion. Now, most of my apps will not work at all! The past week, I have had a
-
Auto Sync in iTunes for iPhone 3G
I have an iPhone 3G. Under summary > options, "automatically sync when this iPhone is connected" is grayed out so I can't select it. Can anybody tell me why?
-
Do you need internet connection to use pacman? [solved]
Yes you do. Sorry for the dum question, Do I need to have internet connection to use pacman? Thanks The reason I ask is because I need madwifi for my wireless and Arch does not allow me to install this file using pacman -A ...... Last edited by viga
-
Why aren't my settings retained after restarting Firefox?
I customize the toolbar and remove the FEEDBACK button. But every time I restart Firefox, the FEEDBACK button comes up. How do I get rid of it? I also "USE CUSTOM SETTING FOR HISTORY" but every time I restart Firefox 4, it goes back to default "Firef
-
I bought an extra 512mb of RAM (to add to the existing 256) when I purchased my computer (ibook G4, 14", 1.33GHz) just over 12 months ago. I have recently had problems with applications quitting unexpectedly. The hardware test CD reveals that only 25