Regarding Appraisal infotype

When i want to create Appraisal for an employee,infotype only showing one screen with Weightages,where i have to add tabs like Qualifications,proficies,dislikes etc.I have been configured in Profiles.Please correct me..where i have to make changes

hi
if u r planning to go about custom infotype ..start it with 9* in PM01 and maintain the structure and say create all...in screen painter u can add subscreen and stuff u want!!
Reward points if it helps
regards
Gunjan

Similar Messages

How to Assign Profiles to Appraisal infotype,

Can anyone guide me How to Assign Profiles to Appraisal infotype,where i have to make changes in IMG to get screens in 0025 infotype

Hi
Go to tcode SM30 and table T77S0.
In this table, read the documentation about switches PLOGI-QUALI and PLOGI-APPRA. Then make appropriate settings in these switches as per your requirements.
Hope this helps.
Regards,
Vikas Bhatia

LSMW for PA70 Tcode and APPRAISAL infotype in HR ABAP

Hi Experts,
Please help on this, how to create LSMW for PA70 transaction and appraisal Infotype in HR ABAP.
Thanks,
Kumar.

Try searching BDC for table control.
Lot of things are available you need to include that .
For Appraisal.
Check using below FM and try to develop a legacy data upload prog
RHPA_APPRAISAL_DELETE - To delete the appraisal
RHPA_APPRAISAL_ACTIVATE - To activate appraisal before modification
RHPA_APPRAISAL_READ - To change rating and status for an employee
RHPA_APPRAISAL_1045_MODIFY - To modify rating and change date for appraisal
RHPA_APPRAISAL_HISTORICIZE - To change status of appraisal to completed
Performing all actions in order should help to load appraisals.
Thanks

Regarding OM Infotype 1038

Hi All,
Can any one help me why functionaly used infotype 1038? i need to do configaration on this like need to create subtype to this infotype . how can i do? I could not find spro path or table for this.
Can any one please help me.
Regards,
Saritha

Hi,
creating a subtype is not a problem that you can do the config via table V_778U with the time constraint.
But i never use this infortype. i relay dont know for what purpose its used..
wait for others suggestions.
Regards,
Dinesh

Regarding OM Infotype Enhancement

Hi Friends,
I got a requirement to enhance a OM Infotype HRP5122 and HRP5126.
Please give me a hint to do the enhancement.
Thanks,
Anil.G

Hi,
Enhanement for hrp5122.
open the infotype , and the last field is include and its dataelement. With that include you can make the enhancement.
Regards,
Vani.

Regarding 0589 infotype

Hi guys,
We are maintaining medical reimbursement limit of Rs 15000 in 0589 infotype by 00m0 wagetype.
But when we are entering medical reimbursement amount by 00m0 wagetype in 0015it, it is not maintaining Rs15000 limit.
If we give any amount greater than Rs15000 it is accepting that value.
Can anybody tell where is the main problem?
We also maintained v_t7INA9,v_T7INT9 table properly.
As fer i know medical reimbursement limit is maintained by 0589 infotype & Exemtion limit by 0582 infotype.
If i am wrong pls rectify
Regards
Surajit

Hi Surajit,
IT0589 is used to maintain the reimburement limit for the claim/ reimbursements. Which comes into picture when you will process the reimbursement via claim process given by SAP that is PC00_M40_REMS, PC00_M40_REMP, PC00_M40_REMT, PC00_M40_REMC (Following are the tcodes for claim report).
Please note that when you will process the reimbursement via these report, this limit will be applicable and accordingly the reimbursement will be process subjected to that limit.
BUt if you maintain the same via IT0015 directly, there is no control you can put over there.
Praveen

Regarding custom infotype

i have created a custom infotype.when i click the maintain overview button for that infotype,iam getting the maintain overview screen.but the problem is that some invalid names are coming as the field names.how to change the field names or header of the values in the maintain overview screen.please give me a solution.
thanks.

Hi Vadivel
Custom infotypes have maintenace screens with the name "<b>MPXXXX00</b>". 'XXXX' is the infotype number. The overview screen is the number '<b>3000</b>' included in program "MPXXXX00". You can modify this screen as you want. However, it may be still in context of repair.
Kind Regards
*--Serdar
[email protected]

Regarding Appraisal type

Hi,
can you help me to find the filed ' Appraisal Type' .
Thanks,
Anil

Check infotype se11> PA0025 and
se11 > PS0025
its works for you, reward if useful.
Amit Singla

Regarding Appraisal Template Weighted result

Hi Experts,
In the current appraisal template the weighted result is coming as weighted value = (final appraisal) * (Weighting).
weighted value = (final appraisal) * (Weighting).
Weighted Result (=FWGT * FAPP)
Instead of this my client wants it to be
weighted value = ((final appraisal * Weighting)/100 ).
Weighted Result =(FWGT * FAPP)/100)
I have not worked in badis so i need ur help to complete this requirement.
I went through the forum but i am unable to complete..
Please let me know how it can me done..
Thanks & Regards,
Reena,

Hi,
Do we have to create a new implementation for this one.
Or we should change the standard code of VALUE_DETERMINATION method?
Thanks,

Regarding Appraisal Forms

Hi ,
I have one requirement , wherein we need to design the appraisal form which takes in long texts in itself and also those fields are of comments which are required to be hidden , coz this appraisal form goes up in the ladder . At any point of time in the whole process the appraisee can see his form but cannot see the rating been given to him by his superiors and also the comments.
Also this all had to be done with workflow . I am not aware of workflows and HR as well . Now I want to know how can I approach for this problem . Can it be done with module pool programming , or it needs to be done by creating iViews over the portal . I seek help in this regards , PLease let me know which one will be a better option and why ?
Thanx in advance .

Hi,
The better option is to go with iviews over the portal. Designing iviews is easy and a much better user interface.
Regards,
Senthil

Regarding Custom infotype 9006 data maintanance

Hi,
There was an error showing while creating a record for custom infotype "9006" .
This infotype cannot be maintained directly
Message no. PG170
Diagnosis
You cannot maintain this infotype directly.
Like the Archived Objects infotype (0283), it can only be maintained by the system, and not manually.
System Response
Manual maintenance is not permitted.

It seems to me as some custom code is causing this error message. Can you get an ABAPPER to debug and check where this error message is being issued?
IT 9006 is a custom infotype, therefore either the message is appearing because the infotype has been copied from a standard infotype such as 0283, or this error message has been deliberately introduced by the infotype creator.
Atleast I could not find any table where this attribute is maintained.

Regarding 0128 infotype text name data

Dear Friends,
                          I am using the IT0128 infotype but in that my text name fields is coming empty .I want to know where i have to maintain the data for that field so i can select that data in my infotype .
kindly give me solution for that .
thanks
sandeep

Hi Sandeep,
In the Notifications Infotype (0128) you define the additional information that should be printed on your employeeu2019s salary statement / remuneration statement. For example, messages from management and birthday greetings.
Structure
The Notifications infotype (0128) has the following subtypes in the standard system.
·        Subtype 1:     General notifications
In this subtype you assign a text module to a personnel number. You have created the text module previously using the function Tools --> SAPscript --> Standardtext. T-Code SO10. You cannot edit the text module directly in the Notifications Infotype (0128).
·        Subtype 2:     Personal notifications
In this subtype you edit an individual text module for the personnel number in question. You can only edit and display this text directly in the infotype.
Chandu

Regarding appraisal templates whose appraisal documents already been made..

hi experts,
i need to make some changes in the appraisal templates whose appraisal documents has already been made
but when i go make changes in the system with the help of TC -OOAM the system giving me message that "changes no longer possible in the templates as appraisal documents already been made" ,what i want to know is there any alternative solution that without deleting appraisal documents i will be able to make changes in the appraisal templates.
plz help me.

no, you have to delete all the documents if you want to unrelease the template.
You can take a copy of the first template or write a migration report, but that's all custom development.
You have to be sure that the template is finished 100 procent before you start using it

Query Regarding Standard Infotype Enhancement

Hi Experts!
I have enhanced IT0021 with a Custom field for Switzerland through PM01. But, my requirement is that this field should be only visible for the Subtype '2' ( Child ). For all other subtypes of IT0021, this field should not be seen at all. I know I can write some custom code in include ZP002100 and check for the subtype and make the field invisible. But, yet, is there another elegant way through any custom setting? I mean through SPRO.
Thanks in advance!
Mahesh..
Edited by: Mahesh C on Jul 20, 2009 8:28 PM

Hi Mahesh,
Even after configuring T588M table for the screen modifications, you will still need the logic be incorporated only through some programming changes for the mentioned include. You may also check the Userexit option for setting up this validation based on the subtype.

Deactivate the link between qualification and appraisal

Hi expert,
i have a question for the qualification(infotype 0024) and appraisal (infotype 0025) in PA here.
After I maintained qualification for infotype 0024, i found that, when i go into appraisal(0025), the screen automaticlly switched to qualification(0024).
As i known, i have already done the configurations for the appraisal, but all the appraisal criterira didn't show in info type 0025.
Anyone knows how to deactivate the link between qualification and appraisal?
please advice.
Thanks,
Liang

Hi Liang,
Goto SM31 -> T77S0.
PLOGI APPRA - make it 0.
PLOGI QUALI - make it space or 0 A032 Q.
Try it.
Regards,
Dilek

Regarding Appraisal infotype

Similar Messages

Maybe you are looking for