Regarding Attribute Change Run in Bi 7.0 version

Hi Experts,
Recently i tried to execute the
ACR using the program " rsdds_aggregates _maintain" in bi 7.0
But it showed the message the program does not exist in status bar.
Recently our project has upgraded to 7.0 .
Is there any other program for ACR in bi 7.0 ?

Hi,
The same program is available in BI 7.0.
Please check the same in SE38 Transaction.
Regards,
Nitin Pardeshi

Similar Messages

Regarding attribute change runs in process chains

Hi All,
While creating process chain for master data objects. I am trying to incorporate attribute change run process type for an info object. But the system asks for the DTP of the attribute and when i choose the DTP then both DTP and then Attribute are being incorporated. This is not exactly a problem but i need to understand why it is happening as i am already using that DTP to load data. Will this affect the data in master data object?. Thanks in advance.
regards
satish

Hi Bhagyarekha,
The reason behind that error could be:
An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
Check this SAP Note:
Note 684405 - Replacing the compounding and deleting navigation attr.
Hope it helps.
Veerendra.

Regarding Attribute Change Run failure.

Dear All,
We have a process chain which contains many meta chains.
Now in each chain i mean meta chain there are attribute change runs
We have desegregated the attribute change run. is tere any method to place a check for attribute change run locks because at the last i have another attribute change run which is failing every day because of the attribute change run is still happenign in some chain.
how do i implement it?
Thanks in advance
Janardhan Kumar.

Hi Janardhan,
In master data process chain where you have added process of attribute change, just insert a program before this process:
The program is: RSDDS_CHANGERUN_MONITOR
This program will check for any another attr change run running at that time and if there's any other attr change run runnning locking the object which your next attr change run requires then this program will not allow your attr change run to run.
Once all the locks all cleared for attr change run it will trigger the next node.
This program has a do loop which keeps on checking until unless locks are cleared.
Regards,
Vij

BWonHANA: Attribute Change Runs (ACR)

Dear all,
I have a question regarding Attribute Change Runs (ACR) in BW system running on HANA.
According document: Attribute Change Run it suggests that ACR may not be needed in BW running on HANA DB. However I'm looking for some experience in this topic. So is ACR needed? If so does it run faster comparing to legacy DB?
thank you
m./

Hi Martin,
go through below thread for existing experience:
Program to run Attribute Change run
Attribute Change Run – Strategies and Parameters
Attribute Change Run concepts - SAP NetWeaver Business Warehouse - SCN Wiki
LET'S BE BETTER IN SAP BI: Why Attribute Change Run in SAP BI 7.0 is required?
Regards,
V Srinivasan

What is Attribute change run in process chain

Hi Everyone,
Can anyone please give some information regarding "Attribute Change Run" in process chain. And how it is useful ?

Hi Aditya,
You need to schedule an attribute change run when you change master data attributes or hierarchies that are used as navigational attributes or in aggregates. There is a simple test to check if you need an aggregate change run. Load your attributes and look into the master data table (directly via SE16). If you only have entries with OBJVERS = 'A' (active) then you don't need a change run. If you have entries with OBJVERS = 'I' then you need to schedule a change run after upload.
Look at these previous threads
Re: When to use Attribute change Run
Re: Attribute Change Run
Regards,
R.Ravi

Attribute Change run taking too long time to complete.

Hi all,
Attribute change run has been taking too long time to complete.It has to realign 50 odd aggreagates, some by delta , some by reconstruction. But inspite of all the aggregates it used to finish in quick time earlier. But since last 4-5 days it is taking indefinite time to finish.
Can anyone please suggest what all reasons may be causing this? and what possibly can be the solution to the problem? It is becoming a big issue. So kindly help with ur advises.
Promise to reward your answer liberally.
Regards,
Pradyut.

Hi,
Check with your functional owners in R/3 if there are mass changes/realignments or classification changes are going on regarding master data. e.g. reasigning materials to other material groups. This causes a major realignment in BW for all the aggregates. Otherwise check for parameterchanges / patches or missing db stats with your sap basis team.
Kind regards, Patrick Rieken.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

ABAP program to add in the process chain before the attribute change run

Hi
I need a ABAP program to add in the process chain before the attribute change run(process) to avoid the locks, can any one send me the program
Regards,
Satish

I am not sure of any standard program .... but you can write your own... should be a small one..
you can check if the table RSDMDENQ has entry for your InfoObject... if yes, then its locked.. if not.. its not locked

RSA1 Setup and Hierarchy / Attributes Change Run Activation

I have perfomed a Hierarchy / Attributes change run in RSA1, but althought it shows no errors; in some transactions (reports) its not updated or rather it still shows the previous and the actual hierarchy values overlapped.
One of the possible solutions its to deactivate and reactivate aggregates, I already entered 0 in transaction RSCUSTV8, also try to find info objects and click on activate master data but none has the option and they are not assigned.
I been reading some solutions that involve making changes to the data that shows in different parts of transaction RSA1, the problem is that in my case there are no data in the transaction just shows some unassigned info objects.
In fact SAP ask me to provide a System Logical Name prior to use transaction RSA1. So problably there are more set up steps missing.
Does somebody knows where should I look for answers.
Thanks
Best Regards,
Carlos

Its more complicated than I thought currently learning more about BW

Attribute Change Run in BW 3.5

Hi,
In RSA1 ->Monitoring ->Reallignment Run,
When I click on the InfoObject List button, I can see one InfoObject.
1) Does it mean the attribute Change Run is not yet perform for this InfoObject?
2) If yes, then I would just need to select this InfoObject, then click one the Execute button, correct?
3) If not, then why I have that InfoObject in the InfoObject List button?
Please advise, thank you.

Hi,
For your last quesdtion, why the infoobject is there in the list is it could be that the master data was changed/new records in to BW for this infoobject, hence requires the change run to be executed.
Regards.
Srini

How to trigger attribute change run manaully

Hi all,
i need to update a master data object with new data. i have the flat file. i scheduled info package and exected DTP (datasource -
>Master data object). now I need to trigger attibute change run manually. How would i do that?
Pls help
Please search the forum before posting a thread
Edited by: Pravender on Feb 4, 2012 11:16 AM

HI Ramya,
Activation master data is different than running Attribute change run.
Activate master data will only activate the master data in info object(Change the records in M version to A version.
Attribute Change Run will activate the master data in info object and updates the aggregates with new data if you have any aggregates built on this info object.
Be specific while asking the question.
Regards,
Venkatesh

Process Chain Attribute Change Run

Hi Experts,
I am working BI 7.0 version, I am try to run Process chain showing warning Error in Infopackage level, Please find the below Error Message:
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.ZPAK_4DLO5GB778XTBBM57040KMRW4 in the chain
Please provide me solutions, how to solve this issue, Please ASAP.
Thanks & Regards,
Bharathi.

Hi All,
Thanks a lot for ur assistance.
Thanks & Regards,
Bharathi.

Hierarchy/ Attribute Change Run

Hello Gurus,
I am loading data into one infoobject which is having attributes, text and hierarchy. But after loading data into that info object, if I check in tools -> Apply Hierarchy/Attribute change Run, for that same infoObject it is showing blank.
How do I get that infoobject into tools -> Apply Hierarchy/Attribute change Run -> info objects list???
Thanks in advance.
Regards,
Rajdeep.

Hi Lavanya,
I am doing the same, I am trying to load data. It is getting loaded in the characteristic but I am not able to see that infoobject in apply hierarchy/ attribute change run.
In manage tab I can see that request with ready for reporting.
Thanks for your quick reply.
Regards,
Rajdeep.

Attribute Change Run and Editing BI data

Hello Experts,
I have two questions.(They are not related to each other).
Can BI data(Infocube data) be edited?
For eg GL account in R/3 is changed from 100 to 2100. I want to know how can this be handled in BI.
Attribute Change Run in the process chain ends with error.
"Master data characteristic ZACCTNUM activated in 6 seconds. Error while activating characteristic   ZACCTNUM ". There are no more information.
   The BWREMOTE user has the authorisation to Execute Change Run.
   What could be the possible reasons for this failure.
Thanks in advance.
Regards
Meenakshi

Hi Meenakshi,
Regarding your questons:
1. You can't edit the data directly in the cube. If you have incorrect data in the cube and the data is still in the PSA you can edit the incorrect data in the PSA and you can then delete the incorrect requests from the cube. You can then reload the correct data from the PSA. If its not an option to delete individual requests you could delete the incorrect data using the selective deletion option (if you can select on the incorrect data in the cube). You could then reload the correct data from PSA or source system.
2. Please check the infoobject ZACCTNUM is active in RSD1. If it is there may be an inconsistency with the data in the infoobject ZACCTNUM, please check if the solution part of the SAP note 1033721 can help you in this case.
Best Regards,
Des.

Attribute change run error in daily job (BI 7.0 SP 23)

Hi All,
We are facing an Attribute Change Run error in one of our daily batch job.we donnot see any locks in SM12.and a dump occurs in ST22.we also donnot have any master data load running at that time .We executed the the FM RSDDS_AGGR_MOD_CLOSE,but the Change run error occurs frequently .How to get the root cause of this issue as we donnot have any master data load running at that time.
regards,
maria

If you are sure that your master data is 0MATERIAL then GOTO-RSA1>Tools in Top>Select Attribute Hiearchy Change Run>Select Info Object List>Select 0MATERIAL>Execute.Then message "Attribute/Hierarchy change run scheduled" will appear in the Tab on your User ID.Once its finished your masterdata is activated.
For Activate Master Data we can do another method like "Right click on the particular Infoobject which need to activate and click "Activate Master Data".
The above steps is for manual activation of master data changes..
If you want to automaize the above steps "Need to add Attribute/Hierarchy Change Run" in the process chain.When execution of Processchain it will activate all the master data in the list one by one and also realign the Aggregates which using the master data objects.

Regarding Attribute Change Run in Bi 7.0 version

Similar Messages

Maybe you are looking for