Regarding Barcode Configurations

hi
i am new to the barcode,
can any body send documents regarding where can we configure the interfaces or addons like scanner,
hw can configure in spro and reading data from scanner & storage.
Thanks & regards
Spandana

hi
Yaron,
Thanx for u r assistance,
Actually    wt i need is , while i am posting   the good reciepts ( incoming goods)
i would like to take material,batch number etc from the barcode on the goods by using barcode scanner,
hw can i get     data from barcode into sap. (    suppose barcode contains Matrial number &   batch).
can u send limks   how to   configure scanner to Sap and read   the data   from Sap.
Thnaks & Regards
Spandana

Similar Messages

Query regarding Mobility configuration

Hi All,
I have some queries regarding mobility configuration. I have to two WLC's; one Cisco 5508 & another Cisco 4402. My queries are:
1. I have configured both the WLC's in same Mobility domain & same Mobility group but with different Management IP segment. Will they be considered within the same mobility group or they will work as if they are the part of different mobility group?
2. Currently I have 100 AP license on WLC 5508 & 50 AP license on 4402. I am having more than 50 AP's in my network & all are registered with WLC 5508 since it is the primary. I want only selected 50 AP's to register with WLC 4402 in case WLC 5508 goes down. Is there any way I can achieve this?
Regards,
Shahab

1. I have configured both the WLC's in same Mobility domain & same Mobility group but with different Management IP segment. Will they be considered within the same mobility group or they will work as if they are the part of different mobility group?
Yes... As long as there is connectivity between the two WLC and the ports udp 16666 and IP97, the mobility should be up.
2. Currently I have 100 AP license on WLC 5508 & 50 AP license on 4402. I am having more than 50 AP's in my network & all are registered with WLC 5508 since it is the primary. I want only selected 50 AP's to register with WLC 4402 in case WLC 5508 goes down. Is there any way I can achieve this?
Depending on the code in the WLC, you can set the priority to the AP in the high availability. So the 50 AP's you can set them higher than the other 5.
Sent from Cisco Technical Support iPhone App

Barcode configuration

Dear experts,
I am configuring the barcode specifications for the warehouse.We are using the EAN128 for storage unit labels and EAN13
for Storage bin labels.In the configuration i have added these entries in 'Assign Bar Code Types to Warehouse Numbers'
What more configuration required for the above entries? Do i need to copy all the entries of application identifier of EAN128 to EAN13 and make another entry in 'Maintain Bar Code Specification'?
Also can anyone provide me some notes on Barcode configuration ?
I appreciate your time in advance
Edited by: pranathi728 on Dec 10, 2009 8:17 PM

Normally this configuration is not necessary for printing storage unit and bin labels. The barcode type (128 etc.) should be specified directly in the SAPscript form. Or you can use a third party label design tool like Bartender (by seagull scientific) to build the forms using simple drag and drop tools and then export the format and upload directly in the SAPscript form, make a few syntax checks and you are ready to go. Configure the output triggers in OLML or OMSU and you are ready to go..
Hope this helps...

Barcode configuration in ECC6.0

Dear Friends,
We have urgent client requirement to configure barcode functionality in ECC6.0 version. Please guide me technical and functional configuration need to configure the sytem.
Best Regards

Hello Jaya,
Are you using Warehouse Management?
I think this url will help, it talks about the Barcode activation.
http://help.sap.com/saphelp_46c/helpdata/en/60/0691384ec60126e10000009b38f8cf/frameset.htm
Also, check with your hardware provider (RF device) on how to integrate with SAP.
Regards
Arif Mansuri

Need detail information regarding Barcode Integration with SAP

Hi All,
Wanted to know the steps in integrating SAP system with the existing barcode reader. I need to know how to read and attatch the barcode reader and how to process the barcode. It will also be helpful if relevant documents are supplied.

If I'm understand your question correctly, you want to send the order you receive on your web to the manufacturer. Then manufacturer will create a sales order and delivery order on their side and deliver the good to the clinic.
In this case,
1,2) It would be better for you to send the order to them instead of creating the wsdl for them to call. There is a standard format EDI for sales order that SAP use to interface with legacy system. You cna generate the data in this format and send to each manufacturer so they can configure the system on their side.
3) The module is called SAP order fullfillment or SAP order-to-cash or SAP SD (Sales & distribution). It means the same thing just some people call it differnetly. SAP SD is the common one.
4) Surely there will be some effort for each manufacture to integrate their system with you. However, If you use the standard EDI, the effort would be minimal for the manufaturer that already implement this with other partner.
5) you can pass along the address in sales order. If the manufacturer system implemented SAP SD, they should be able to create sales order, delivery order and invoice from their side.
Regards,
Chaiphon

Regarding IPC Configuration in CRM 6.0

Hi Friends,
                Can anyone please tell me if there any configuration required for IPC in CRM 6.0 .
(I am getting the Variant Configuration data from R/3).
Kindly reply immediately as this is bit urgent.
Regards,
Satish

Hi Satish,
421480     Activating IPC Serverl Logs
369126     Activation of Trace file between CRM or R/3 and IPC
502562     Activating RFC and JCO Trace files
Please refer those and see if this helps.
regards,
Muralidhar Prasad Chatna

Regarding replication configurations in oracle 9i

Good Morning...
In my current project,I have 3 databases like A,B and C.now i need to create materialized views on B & C database using dblink(created on A database), then i need to refresh around 70 tables for every 1 hour. so in this regard i need information about replication server configuration & DBLINK & MVIEW's ...

OK. Then you'd need to configure Advanced Replication, not simple one-way materialized view replication.
You'll want to start with the Advanced Replication manual.
Justin

Very Critical....Barcode Configuration..Plz Help....

Hi SAP Gurus....
Could you all plz help me to map in SAP..MM..Its very critical need to provide solution to my client ASAP
1.     Client procures two types of products from ABC Dubai namely, A and B products.
2.     The products under warranty are being tracked using Barcodes.
The barcodes are generated at the client place with the Purchase Order and sent to the Vendor by Post or through E-mail.
3.     Barcodes have to be printed in the case of Post, or converted into .PRN file in the case of an E-mail
4.     These barcodes are then pasted on the products as required and shipped back to the Client.
5.     Barcode used currently is EAN 14, code 128.
6.     Client has different Handling Units (HU), like Outer, Inners (smaller carton inside Master carton), and items inside Inner carton. All the three HU has different barcode series. Inners have Master carton number of Pieces have respective Inner carton numbers.
7.     At the time of GR, Masters are scanned, and details up to pieces are collected into system automatically.
8.     All goods movement happens then with barcodes.
Could you all plz tell me how to create the below details....respective of above requirements....
u2022     Question - -
      How to Create Barcodes
Edited by: shrii on May 22, 2009 9:31 AM

Map the procurement with inbound delivery so that handling units will be captured and barcodes can be sent to the vendor with the help of data from inbound delivery. For barcode printing, follow: http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope, this will help you.
Regards,
Sudhir Dahake

Query regarding Barcoding in Inventory

Hi,
Can anyone let me know whether we can capture or track EAN 13-digit number in Oracle Inventory.If so which is the table which contains this field information in Inventory.
The Item number is generated by the system automatically and the cleint want to capture the EAN13 digit code during all transaction.Client wants to use Barcode scanning during item receiving and other all transactions.
Will Inventory alone support this barcode scanning?
FYI, the cleint does not have WMS or MSCA implemented.
Any pointers will be of immense help.
Regards,
Bala.

what you print on what basis is just dependend what you would like to say with the label.
What do you like to show with the barcode? the material number? the purchase order number, or the material document number?
if you would like to lable each item e.g. you order 20000 kg of a chemical packed in 200 kg drums, then you probably need 100 labels, dont you?

Regarding ESS configuration

Hi All,
     I deployed business package now how to create system alias in portal?
    What are the steps to create system alias?
    Where i have to findout that deployed business package?
regards,
kumar

Hi,
Go to System Administration -> System Configuration -> System Landscape -> Right click on any folder -> Create -> System. Refer to this online help to create a system : http://help.sap.com/saphelp_nw70/helpdata/en/ec/0fe43d19734b5ae10000000a11405a/content.htm
In the last step, select the checkbox "open for editing". This is how you can edit you system properties: http://help.sap.com/saphelp_nw70/helpdata/en/42/11e43d19734b5ae10000000a11405a/content.htm
Now,when you right click on this system created -> Open ->System Alias. You can create a system alias here. Refer to this section of online documentation : http://help.sap.com/saphelp_nw70/helpdata/en/e9/9bc93f92908032e10000000a11405a/content.htm
Hope this helps.
Cheers,
Sunil
PS: Reward points for helpful answers.

Regarding barcodes

Hi All,
How to print SCC-14 and UCC-128 barcodes through SAP Smartforms?

Hi
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
go through these links and cose u r previous threads,
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
smartform - barcode
http://www.erpgenie.com/abap/smartforms.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
Regards
Anji

Regarding Barcode Type....

Hi friends...
     How can I get the information about the attributes of different barcode types   used in Smartforms?
Kindly Suggest me the solution for this query???
Points will be rewarded to the useful answer...
Thanx,
Rahul.

Hi Rahul,
You can use barcodes types already created or you can create new one if
these types does not satisfy you requirement.
If you create a new system bar code for the "new bar code technology" in transaction SE73, you must specify the following parameters:
Bar code name (used in Smart Styles)
Short text for system bar code (documentation)
Bar code symbology:
    Code39
    Code128
    Interleaved 2of5
    PDF417
    Code93
This selection determines the technical bar code type that is used to format the bar code data (also called bar code symbology). The symbology also determines which characters are allowed in the bar code data.
Bar code alignment:
Normal (that is, the scan direction is "from left to right")
Rotated (the scan direction is rotated by 90 degrees "from top to bottom")
Inverted (the scan direction is rotated by 180 degrees "from right to left")
Bottom-up (the scan direction is rotated by 270 degrees "from bottom to top")
Code39 ******************
Code39 is an alphanumeric code that can represent the following characters in the bar code data:
Numbers:        1234567890
Capital letters: ABCDEFGHIJKLMNOPQRSTUVWXYZ
Special characters: - . $ / + %
Blank characters (space characters)
The start and stop character for the Code39 bar code is usually represented by an asterix (*) in the text view of the bar code data (also called "human-readable text" or "interpretation line").
Parameters for Code39:
Narrow module width
Value range: 1 to 10
This is the width for the narrowest module of a bar code, measured in pixels. It controls the width of the bar code. Value 1 generates the "narrowest", value 10 the widest bars or spaces.
Linear height
Value range: 1 to 9999
Controls the height of the bars of the bar code, measured in pixels. A value of 600 is equal to a height of one inch.
Mod-43 check digit
Value range: X equals YES, blank character equals No
With this indicator, you can determine whether a Modulo-43 check digit is to be generated.
Bar ratio
Value range: 20 to 30
This value controls the ratio between wide and narrow bars. This value controls the ratio between wide and narrow bars.Value 20 means a ratio of 2.0:1, value 30 means a ratio of 3.0 to 1 (that is, 3:1).
Parameters for Interleaved 2of5:
Narrow module width
Value range: 1 to 10
This is the width for the narrowest module of a bar code, measured in pixels. It controls the width of the bar code. Value 1 generates the "narrowest", value 10 the widest bars or spaces.
Linear height
Value range: 1 to 9999
Controls the height of the bars of the bar code, measured in pixels. A value of 600 is equal to a height of one inch.
Mod-10 check digit
Value range: X equals YES, blank character equals No
With this indicator, you can determine whether a Modulo-10 check digit is to be generated.
Bar ratio
Value range: 20 to 30
This value controls the ratio between wide and narrow bars. This value controls the ratio between wide and narrow bars.Value 20 means a ratio of 2.0:1, value 30 means a ratio of 3.0 to 1 (that is, 3:1).
Code 128 *****************
Code128 is an alphanumeric code that can encode three different character sets. Each of the three character sets can represent 106 different characters. Within a bar code, you can alternate between the character sets.
The three Code128 character sets are named as follows:
Subset A) (contains, for example, digits, capital letters and control characters)
Subset B) (contains, for example, digits, uppercase and lowercase letters)
Subset C) (digit pairs from 00 to 99)
Parameters for Code128:
Narrow module width
Value range: 1 to 10
This is the width for the narrowest module of a bar code, measured in pixels. It controls the width of the bar code. Value 1 generates the "narrowest", value 10 the widest bars or spaces.
Linear height
Value range: 1 to 9999
Controls the height of the bars of the bar code, measured in pixels. A value of 600 is equal to a height of one inch.
Code128 mode
Value range: N (default value), A, U
In default mode N (None), the Code128 bar code works in subset B. If you want to switch to another subset, you must trigger the change explicitly with a control command ("invocation code") in the bar code data.
In mode A (automatic), the software analyzes the transferred bar code data and recognizes automatically which subset is the most adequate for the bar code data. Subsets are swapped automatically in the bar code data. A sequence of four or more digits initiates an automatic change in subset C.
In mode U (UCC case mode), you must transfer 19 digits in the bar code data. Subset C is set automatically and an FNC1 character is added as prefix.
Note: If fewer than 19 digits are transferred, the bar code is filled with zeros to the left until it contains 19 digits.
UCC check digit
Value range: X equals YES, blank character equals No
Note: This parameter has no effect becaues Code128 always generates a check digit, even in UCC mode. The parameter will be removed in the future.
Code93 is an alphanumeric code that can represent the following characters directly in the bar code data:
Numbers:        1234567890
Capital letters: ABCDEFGHIJKLMNOPQRSTUVWXYZ
Special characters: - . $ / + %
Blank characters (space characters)
The start and stop characters in the Code93 bar code are represented as # sign in the text view of the bar code data (also called "human-readable text" or "interpretation line").
Parameters for Code93:
Narrow module width
Value range: 1 to 10
This is the width for the narrowest module of a bar code, measured in pixels. It controls the width of the bar code. Value 1 generates the "narrowest", value 10 the widest bars or spaces.
Linear height
Value range: 1 to 9999
Controls the height of the bars of the bar code, measured in pixels. A value of 600 is equal to a height of one inch.
Check digit
Value range: X equals YES, blank character equals No
With Code93 bar codes, a pair of check digits is always used and is always generated in the bar code. This parameter has no effect.
PDF417 is a two-dimensional bar code to represent datasets that are larger as the usual datasets in one-dimensional bar codes (for example, more than 1,000 characters). The entire 7-Bit ASCII character set is generally processed (binary values 1 - 127, the value 0 is not permitted).
A PDF417 bar code consists of 3 to 90 consecutive rows. Every row consists of a start/stop indicator and "code words". A code word consists of 4 bars and 4 spaces. The minimum number of code words per row is three.
Parameters for PDF417:
Narrow module width
Value range: 1 to 10
This is the width for the narrowest module of a bar code, measured in pixels. Value 1 generates the "narrowest", value 10 the widest bars or spaces.
Linear height
Value range: 1 to 9999
This parameter currently has no effect on PDF417. The height of a PDF417 symbol is controlled by parameter "Single Row Height" and the number of columns and rows, in conjunction with the length of text data to be encoded.
Single row height
Value range: 1 to 32000
This value, multiplied by the narrow module width, returns the height of the individual rows of a PDF417 symbol, measured in pixels. Caution: Do NOT use the value 1 for this parameter
Security level
Value range: 0, 1-8
This parameter controls the number of code words that are generated for error recognition and error correction. The default value 0, however, only permits error recognition but no automatic correction. If you increase the security level, the level of error correction increases with it (this increases the size of the bar code).
Number of columns
Here, you can define the number of the code word columns which you can use to check the width of the bar code.
Value range:
0 (default value) : A row/column ratio of 1:2 is used.
Permitted values: 1 to 30
Number of rows
Here, you can define the number of rows which can be used to check the height of the bar code.
Value range:
0 (default value) : A row/column ratio of 1:2 is used.
Permitted values: 3 to 90
For example: If you leave both parameters set to the default value 0, the system would convert 72 code words in a bar code symbol with 6 columns and 12 rows.
Truncation
Value range: X equals YES, blank character equals No
This indicator determines if the right row indicator and the stop pattern are to be truncated (this saves space).
The following character combinations in the transferred bar code data have the special function:
\&    - This represents the end of a line (Carriage Return + Newline)
    - This represents a backslash (5C hexadecimal)
\0xYY - This represents a single byte with the value YY (hexadecimal)
        For example: \0x1E is output as a single byte with the value 1E (hex)
        or 30 (decimal).
The souce for this information is OSS Note 645128.
Still if u face any problem feel free to ask.
Regards,
Vivek
-Reward if useful

Regarding Barcodes in Scripts

Hi All,
   I need to diplay one field in script to barcode.I got some code regarding this through some internet site.May i know the meaning of this code.Specially for
(s1p&XDIM&,&YDIM&,&MODHEIGHT&,0s24670T
(s1p40v10,30b10,30s24670T
these two lines.what does this code do.
Actual Code is:
/:   DEFINE &XDIM& = 2
/:   DEFINE &YDIM& = 3
/:   DEFINE &MODHEIGHT& = 3
   <FS><32>
/:   PRINT-CONTROL SESCP
/*   (s1p&XDIM&,&YDIM&,&MODHEIGHT&,0s24670T
=    (s1p40v10,30b10,30s24670T
   &VBLKK-VBELN&
/:   PRINT-CONTROL SBS01
HI   Delivery Number:,,&VBLKK-VBELN&
Bye
Bujji

Hi,
/* (s1p&XDIM&,&YDIM&,&MODHEIGHT&,0s24670T
is a commented line.
/* signifies comment.
Kindly reward points by clicking the star on the left of reply,if it helps.
Check this link for more about Barcodes.
http://www.sap-img.com/abap/details-information-about-sap-barcodes.htm
Message was edited by: Jayanthi Jayaraman

Info Regarding Initial Configuration for BPMN?

Hi @,
I am new to BPMN I have installed the CE EHP1 with BPM addon. I just need to know whether I have to do any kind of configuration for working on the same.
I have created one Process but it is not working and I tried finding solution but couldn't locate the solution. Can you please help on the same.
Regards,
Amit

HI Amit,
Hmm... Just in case, here is the whole documenrtation on CE config:
http://help.sap.com/saphelp_nwce711/helpdata/en/45/a3c3f043cb0cf0e10000000a114a6b/content.htm
and Portal config:
http://help.sap.com/saphelp_nwce711/helpdata/en/5d/69a107210f4f2c81066808623404b5/content.htm
But I think the other docs I sent you should contain all relevant info on BPMN config. If not, could you pls tell me what you think should be enhanced, so that we can fix it and everything is clear? Thanks
Regards

Function Module regarding Barcode

Hello Everybody,
Please tell some FM which take input and generate barcode.
Regards.
Sarbajit.

Hi Anup ,
In OAC5, I have set Object Type VBRK as
BCodeType:- UPC_A
and checked all the checkbox.
And trying to run the BDSBARIN with input Bar code type : UPC_A
                                                                  Object type   : VBRK
                                                                  Object key    : 1
                                                               Document type : BDS_IMAGE
                                                               Bar code : Bar code
ad left other input field blank.Now I'm getting error like SAP ArchiveLink: Objects not assigned to a storage system(Customizing).
Need your help.
Thanks in Advance.
Regards.
Sarbajit

Regarding Barcode Configurations

Similar Messages

Maybe you are looking for