Regarding batch managment in mm01 after stcok had been brought in

hi,
I facing a problem when i tick on batch managment after the stock had come as i had not maintained the vie while creating the material.
But now i want to maintain this field as it is not allowing it.
plzz help me out as it is really urgent to me.

Similar Messages

Regarding batch managment in mm01 after stock had been made

hi,
I facing a problem when i tick on batch managment after the stock had come as i had not maintained the view while creating the material.
But now i want to maintain this field as it is not allowing it.
plzz help me out as it is really urgent to me.

Hi,
Changing from tick to untick or untick to tick of Batch Management indicator follow the procedure (Changing of status in Material Master Record)
Changing the status of the material from Uncheck to checked or viseversa is possible only if the following conditions are met
1 Check the Status of material MMBE
2 There should not be any open Purchase Order Use SE16 & Table EKPO Give the material number for which we have to find the Open Pos; Alternateively ME2M can also be used
3 There should not be any Open Production Order Use SE16 & Table AFPO Give the material number for which we have to find the Open Production Orders
4 There sould not be any Sales Order Use SE16 & Table VBAP Give the material Number for which we have to find the Open Sales Orders
5 There should not be any Purchase Requistion Use SE16 & Table EBAN Give the material Number for which we have to find the Open PRs
6 There should not be any Stock in Transit MB5T
7 There should not be any Plant availability Stock MB53
8 There should not be any Reservation MB25
9 Previuos Period Stock should be zero Use MM03 with Plant Stock & Storage Loc. View If Stock Exists follow the Procedure mentioned in next chapter to close
10 Stock requirement should be zero MD04
11 There should not be any open Delivery Use SE16 & Table LIPS Give the material Number for which we have to find the Open PRs
12 There should not be any open Warehouse Transfer Request Use SE16 & Table LTBP Give the material Number for which we have to find the Open PRs
13 There should not be any open Warehouse Transfer Request Use SE16 & Table LTAP Give the material Number for which we have to find the Open PRs
14 The Batch Corresponding to the plant has to be set for deletion indicator MSC2N
If previous period stocks exist, we can make a withdrawal posting as follows
1. Post the same amount to current period stock (for example, using
movement type 561) so that previous period stock and current period
stock are identical.
2. Make a withdrawal posting in the previous period for the stock
together with posting date (for example, using movement type 562).
If any of the above Stock Exists it has to be closed;If Any of the stock exists we cannot uncheck.
After closing all the open items;the related business documents viz Purchase Orders,Production Orders,Delivery,etc has to be Archived
Archiving has certain criteria while doing Archiving Process-- Systematic Archival is the Key factor i.e relationship diagram has be met.
SAP Note Number 533383 - Resetting batch management requirement
Regards,
Vengat

Error regarding batch management while creating GRN

Hello,
While creating GR I am getting error as "Please enter batch". So in Material master in Plant data/Stor1 view when i tried to remove the tick for Batch management it is giving the error as "Batch management requirement cannot be changed, choose "Display errors"". In Display errors it says "Batches already exist". In stock overview some batches existed.
- How can I remove this tick.
Regards,
Priyanka

Hi,
Below is the procedure to change the Batch Management indicator
Hi,
1 Check the Status of material MMBE
2 There should not be any open Purchase Order Use SE16 & Table EKPO Give the material number for which we have to find the Open Pos; Alternateively ME2M can also be used
3 There should not be any Open Production Order Use SE16 & Table AFPO Give the material number for which we have to find the Open Production Orders
4 There sould not be any Sales Order Use SE16 & Table VBAP Give the material Number for which we have to find the Open Sales Orders
5 There should not be any Purchase Requistion Use SE16 & Table EBAN Give the material Number for which we have to find the Open PRs
6 There should not be any Stock in Transit MB5T
7 There should not be any Plant availability Stock MB53
8 There should not be any Reservation MB25
9 Previuos Period Stock should be zero Use MM03 with Plant Stock & Storage Loc. View If Stock Exists follow the Procedure mentioned in next chapter to close
10 Stock requirement should be zero MD04
11 There should not be any open Delivery Use SE16 & Table LIPS Give the material Number for which we have to find the Open PRs
12 There should not be any open Warehouse Transfer Request Use SE16 & Table LTBP Give the material Number for which we have to find the Open PRs
13 There should not be any open Warehouse Transfer Request Use SE16 & Table LTAP Give the material Number for which we have to find the Open PRs
14 The Batch Corresponding to the plant has to be set for deletion indicator MSC2N
If previous period stocks exist, we can make a withdrawal posting as follows
1. Post the same amount to current period stock (for example, using
movement type 561) so that previous period stock and current period
stock are identical.
2. Make a withdrawal posting in the previous period for the stock
together with posting date (for example, using movement type 562).
If any of the above Stock Exists it has to be closed;If Any of the stock exists we cannot uncheck
After closing all the open items;the related business documents viz Purchase Orders,Production Orders,Delivery,etc has to be Archived
Archiving has certain criteria while doing Archiving Process-- Systematic Archival is the Key factor i.e relationship diagram has be met.
SAP Note Number 533383 - Resetting batch management requirement
Reward points if found useful.
Regards,
E.Vengata Raghavan

I've lost my Contacts, Messages, Photos etc after having IOS 4.3.2 installed at the Apple Store. I cannot locate previous back-up history, only the back-up after I synced the phone after it had been updated. How do I recover my previous info please?

I've lost my Contacts, Messages, Photos etc after having iOS 4.3.2 installed at the Apple Store. I cannot locate previous back-up history, only the back-up after I synced the phone after the update had been installed. How do I recover my previous information please?

You should have restored the backup that was on your computer before syncing. Now it is too late. However, if you followed the instructions in the manual and set up an app on your computer to sync contacts and calendar to they will still reside in those apps. Photos in the camera roll are lost, however, if you had followed the instructions in the manual to copy photos from the camera roll to your computer regularly you can restore them to the photo app from the copy on your computer. Text messages are gone for good. Music and Apps should be in the music library on your computer.

SE3320, Errors after power had been turned off

Hi All.
I have SUN StorEdge 3320 (12x300) + 1xRAID Controler
I made RAID5 (12Drivers = 1xVD = 4xPartition)
then i made 4 luns and had linked each partition to lun.
i made Scan Media - and it was fine.
I made filesystems and mounted into Solaris 8
but, my electric line had been broken. when I repaired it, i had received these message from controler console
CHL0 ID4 Media Error Encountered - 1D95C0 (311)
CHL0 ID4 Media Error Unrecoverable - 0x1D95C0
CHL0 ID9 Media Error Encountered - 1D953A (311)
CHL0 ID9 Media Error Unrecoverable - 0x1D953A
CHL0 ID10 Media Error Encountered - 1D9592 (311)
CHL0 ID10 Media Error Unrecoverable - 0x1D9592
what do them mean? is it dengeros?
what i have to do to repair?
Pers

No need to worry jsanders9! We would be delighted to clarify. Please keep in mind that data usage can be delayed for up to 48 hours. To get the most up to date usage we recommend dialing #DATA send from your VZW device, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT

2007 Macbook Pro suddenly coding over files, pictures, deleting itunes and iphoto albums, after it had been dropped in late november 2010. Apple specialists say they cannot find anything wrong. HELP!

I have a Macbook Pro, the last generation, not the most recent one. It fell about 2 feet in late November 2010 and had the screen and logicboard replaced right after. A day or two after that, I started to notice that my word documents, pictures files, pdf files, itunes library and iphoto library were coded over and deleted out of nowhere. When I click on it, it says it is not a compatible format or cannot be read, etc. However, this doesn't happen all the time and not with every file. I could open a new word document and begin it today, and tomorrow it will not be retreavable, but I have a document on my desktop that has been there since January and can still be opened, so this happens without warning.
I have taken it in to the Genius Bar at my local Apple store several times with this problem, and they say they cannot see anything wrong with my computer. On my most recent visit, the lady told me to buy an external hardrive, transfer everything onto it, then do a complete clean out of my computer and reboot it I guess. If it doesn't continue, then that might have been the problem, but if it does continue, then it is obviously not that. I am really confused and I don't know if I should trust that this is the problem or just go ahead and buy a new computer all together. I don't have applecare anymore.
Help me!!! I am desperate.

Does your MBP still have its original hard drive? If so, it may have started to go south. The average useful life of a notebook drive is 3-5 years, and if yours is the original, it would be about 4 years old. The drop could also have affected it.
It might be worth booting from your install disc and repairing your boot disk. It sounds like you could have some directory issues. Repair until there is nothing left to repair. If Disk Utility cannot repair the drive, you will need a stronger utility like Disk Warrior or possibly a new drive.
It also sounds like you may have some software corruption, which can happen if you have hard drive problems. Have you tried reinstalling the OS? You would want to make a backup first on an external drive and then use the archive and install feature and then update the OS.
You might want to download and run SMART Utility:
http://www.volitans-software.com/smart_utility.php
You can download the demo and run it several times for free. SMART Utility seems to be somewhat more critical than Disk Utility, and may be able to detect impending drive failure sooner.
If the drive checks out OK, then you can follow the advice you got from the genius and make a clone of your boot drive using Super Duper or carbon Copy Cloner on the external drive. You could boot from the clone you made and see how your Mac does when booted from a different drive. If all is good, you can reformat the internal drive and clone back to it.
If all you need is a replacement hard drive, then your Mac is likely worth fixing. I too have a 2007 MBP, and I replaced my hard drive right after Applecare expired, as the drive started to fail a week after Applecare ran out. I put in a Western Digital 500 GB 7200 RPM Scorpio Black, and have been running on it ever since. I have also upped my RAM to 6 GB and my OS to Lion. Not all the features of Lion work on a 2007 MBP--the trackpad does not support Gestures, and AirDrop is not supported. Even so, I expect this Mac to last me a few more years.
iFixit has instructions for replacing the hard drive, and OWC has both good RAM and kits for hard drive replacements. My gut feeling is that your hard drive is behind the weird symptoms you are experiencing.
If you are ready for a new computer, by all means get one--there are some great choices. However, you should be able to fix your old Mac for not very much money and get some more use out of it.
Good luck!

I recently reloaded my CS3 version after I had been experiencing issues, but since then I cannot open Adobe Bridge

My Adobe Bridge will not open, after a reload. The recommended setting was for windows XP Service pack three.

Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
http://www.etresoft.com/etrecheck

My Iphone screen is suddenly very hard to read. The light has disappeared after it had been wet.

My screen is hardly not readable anymore. The light has disappeared, probably after it got wet. Any idea about what I can do to fix it?

This is called "No Backlight Problem", most commonly assciated with water exposure.
Before opening and during any repair on the iPhone 3GS, the iPhone must be OFF or you risk more damage to your iPhone.
10% cause is due to faulty LCD Display, to determine test your LCD Display on another iPhone 3GS or try a new LCD Display on your iPhone. If your LCD is fine, then next step.
80% cause is due to 6r8 Coil on Logic Board. This 1 dollar part must be carefully removed and replaced (soldered) to Logic Board. If still No Backlight Problem, then next step.
10% cause is due to any number of Logic Board problems between the 6r8 coil and the #1 Connector on the Logic Board.

Why is my video cam NOT working again after it had been sent in to get fixed already

Model Number: QE024UA
Model Description: HP PAVILION DV6-6169US NOT
Serial Number: 5CH1430SD9
I had my computer sent to get the video cam working... they sent it back and it worked for about 2-3wks and is not working again also when I call someone elses computer I can hear and see them but they can no longer see or hear me. Cant see due to video not working again again on my part but they used to be able to at least hear me.. Now neither works. I have written plenty of messages to HP (at least 3 that I remember) but with no reply. Not a happy camper right now about this. When I bought this computer It had everything I thought I needed and more for my basic use. I chat on facebook Play their game and browse the web.. watch my netflix. I never really needed a video cam but now since family life has changed and I live so far away from them I specifically ordered this computer cuz of its high quality in video plus I liked the fact it played Blue-Ray. I used to have a Dell that lasted me a good 5yrs of usage. I have had this less than 3mnths and twice the cam has gone out on me.

I'm avoiding buying anything else to use my iMac and had the same problem. I have PC headset with mic and headphones and also a Motorola bluetooth headset, neither worked how they should, no mic function:
I can use the pc headphones that I already had (just didn't input the mic jack part), and the iMac built-in mic together as I chat.
Just go to System Preferences and make the Sound settings for Output to built-in Headpones and Input to Internal Microphone -select "Use ambient noise reduction.
Its a get-around, but it works.

My speakers on my macbook receiently quit working after I had been using some headphones. My headphones still work whenever I plug them in with both increase and decrease in volume. I have also noticed a red light on the inside of the headphone jack.

My speakers on my macbook pro quit working the other day after using my headphones. when I try to adjust the speakers my screen indicator sayes that it is at full volume on the bar but also muted(circle with line through it). I also noticed a red light inside my headphone jack. My headphones still work including volume. Any quick fix?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Turn on batch managed for materials

Hi Expert!
Is there anyway to turn on batch managed for material after it has been used for some times?
Please advise.
Thanks.

Hi,
You can use the Batch Management functionality, even after having some stock for a material without Batch classification. After activating Batch Management, when you enter goods movements for materials, then onwards you must enter the batch number in addition to the material number.
Before you can manage batches of a material in stock, you must first specify in the material master record that the material is to be managed in batches for the specified plant. To do this, you must set the batch management requirement indicator in the material master record (for example, in the Purchasing or Storage view).
Regards,
Narayana.

REMOVAL OF BATCH MANAGMENT

HI,
I have created a material and maintained the view of batch managment
in MM01 and now the problem is coming that while creating invoice it gives error of maintainance batch managment.
now i want to remove the view of batch managment.
plzz help me out as help will be definately rewarded.

Hi,
Changing from tick to untick or untick to tick of Batch Management indicator follow the procedure (Changing of status in Material Master Record)
Changing the status of the material from Uncheck to checked or viseversa is possible only if the following conditions are met
1 Check the Status of material MMBE
2 There should not be any open Purchase Order Use SE16 & Table EKPO Give the material number for which we have to find the Open Pos; Alternateively ME2M can also be used
3 There should not be any Open Production Order Use SE16 & Table AFPO Give the material number for which we have to find the Open Production Orders
4 There sould not be any Sales Order Use SE16 & Table VBAP Give the material Number for which we have to find the Open Sales Orders
5 There should not be any Purchase Requistion Use SE16 & Table EBAN Give the material Number for which we have to find the Open PRs
6 There should not be any Stock in Transit MB5T
7 There should not be any Plant availability Stock MB53
8 There should not be any Reservation MB25
9 Previuos Period Stock should be zero Use MM03 with Plant Stock & Storage Loc. View If Stock Exists follow the Procedure mentioned in next chapter to close
10 Stock requirement should be zero MD04
11 There should not be any open Delivery Use SE16 & Table LIPS Give the material Number for which we have to find the Open PRs
12 There should not be any open Warehouse Transfer Request Use SE16 & Table LTBP Give the material Number for which we have to find the Open PRs
13 There should not be any open Warehouse Transfer Request Use SE16 & Table LTAP Give the material Number for which we have to find the Open PRs
14 The Batch Corresponding to the plant has to be set for deletion indicator MSC2N
If previous period stocks exist, we can make a withdrawal posting as follows
1. Post the same amount to current period stock (for example, using
movement type 561) so that previous period stock and current period
stock are identical.
2. Make a withdrawal posting in the previous period for the stock
together with posting date (for example, using movement type 562).
If any of the above Stock Exists it has to be closed;If Any of the stock exists we cannot uncheck.
After closing all the open items;the related business documents viz Purchase Orders,Production Orders,Delivery,etc has to be Archived
Archiving has certain criteria while doing Archiving Process-- Systematic Archival is the Key factor i.e relationship diagram has be met.
SAP Note Number 533383 - Resetting batch management requirement
Reward if found useful.
Regards,
Vengat

Batch Managment at Plant

Hi, good day
If somebody know about, how can I do to make the choice Batch management at MM01 is only at the Plant and not in general.
That is, a material is with Batch management in a Plant and another Plant the same material without Batch management.
If anyone has an idea about this, please anything would be helpful

Hi,
Yes, it is possible only for whole plant not for a particular material in a plant. if it is active at a plant level then system will ask for batch.
Batch Management can be activated in three levels. They are
1. Client Level
2. Plant Level
3. Material Level
At plant level, the batch number is unique in conjunction
with the respective material and the plant.
At Material level, the batches are unique at material level, that is, the batch is independent of any plant. The same batch
number can also be assigned to another material.
At client level, the batch number is unique in the whole client. It indicates that batches are managed uniquely for
exactly one material, that is, independently of the plant, the same batch can exist only once for all materials.
Example
a) Plant 1000 item code A Batch 1
b) Plant 2000 item code A Batch 1
IMG --> Logistics General --> Batch Management --> Specify Batch Level and Activate Status Management
Hope Help U !!!
Regards,
Pardeep Malik

Material Create Batch Management Mandatory Field

Hi all,
I would like to create material but the batch management fields in several views. Has it relation with, material type or material group or plant? And how can i disable this property for one of our plant ?
Regards,

>
techmaster wrote:
> Hi all,
> I would like to create material but the batch management fields in several views. Has it relation with, material type or material group or plant? And how can i disable this property for one of our plant ?
>
> Regards,
Batch management check once enabled, doesnot need to be enabled again in other view, its automatically enabled as they are all linked together and yes you can disable it for one plant.
In OMSR, look up for field MARC-XCHPF which is for batch management and change the field reference to display and save
Edited by: Afshad Irani on Apr 27, 2010 7:39 PM

STO batch management

Dear All,
i have configured batch management , Now when i am doing STO and in that is the process is
ME21N > Vl10B > VL02N > VF01 > J1IIN.
NOw here in VL02 N when i am doing batch split > Error no batch determination procedure can be determined, and i am not able to do the automatic batch pick up for my delivery material and no PGI. BUT when i am giving Manul Batch system is allowing me to do PGI. Plz guide as how i will cofigure
batch search for REPLEINSHMENT STO delivery

I faced the similar issue, Posted here & I solved it as myself.
Batch Management:
-While Creating Invoice for Batch split material, System copies all the batch items including main item, where as, system should copy/combine all batch split items into Main item, batch split items should not be shown in different line items in Invoice.- ?
In copy control from the delivery type to billing type VTFL, for the item category maintain billing quantity as G. This will ensure that the batches are clubbed into single line item.
In Item Category of the Billing, goto VOV7 u2013 maintain billing relevance as u201CMu201D.
- Batch Management in STO, after creating delivery via VL10F, wrt: STO order, automatic batch determination is not happening for the batch managed material. But for the same Material, from SD it is working fine. System displays message as u201C No Batch search procedure assigned to the order typeu201D
In V/C5, batch has to assigned to the determination procedure in combination of Sales Org / Dist Channel / Division / Order type u2013 Search Procedure / Check batch indicator.
*Sales area should be taken from STO-ME22n, Shipping tab at item level.
*Order type should be, default Order type from the specific Delivery type eg:NL-
Item Category for STO main item : NLN / batch item: ULN, both has to be marked for automatic batch determination indicator in IMG-LG-Batch Mgmt u2013 Batch detu2019n & Batch check u2013 Automatic batch detu2019n in SD u2013 Activate Auto. Batch detu2019n for Delivery Item Catu2019s
After following above procedure, system displays error message as u201C Item Category is not maintainedu201D
-Tcode:0184-Delivery item cat detu2019n
Maintain entries as u201CDel type/Item cat group / Item Usage / High.Item Cat- Default, Item catu201D
Eg: NL u2013 NORM u2013 CHSP -= ULN
CHSP u2013 Batch split item.
Hope this helps you. Try & revert

Regarding batch managment in mm01 after stcok had been brought in

Similar Messages

Maybe you are looking for