Regarding BDLR, SXDB and BMVO Tcodes

Hello,
I want to know if there is any standard method to upload material master, customer master, vendor master and finance master data into SAP system.
I am not referring to LSMW's, BDC's and using BAPI's. I am aware of standard programs like RMDATIND for material master upload, RFBIDE00 for customer master upload and RFBIKR00 for vendor master upload. But these are using direct input method and SAP recommends this only for testing purpose. I am not sure if this could be really used in actual live scenarios.
From some other posts in the forum, I came to know about some transactions like BDLR, SXDB and BMVO. Can some one tell me how to use these T.Codes?
If some one has any detailed documentation on these T.codes or in general standard master data upload techniques please send it to [email protected]
Thanks in advance,
CMV

Similar Messages

Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes

Hi,
We are planning upgrade from 4.6C to ECC6.0 .Is there a table in SAP which contains old and new transaction codes? or is there any easy way to find obselete transaction codes and new Tcodes.
I also want to know the new tables added and replaced tables .Any
help is appreciated.
thanks
Venkateswara Rao Yeleswaram

Hi
Try this link, which will give functionality enchancements between different versions of SAP.
http://solutionbrowser.erp.sap.fmpmedia.com/
Regards
Ramakrishna

We have only GL SAP document number. how to find Vendor clearing document by these GL Document number please suggest and suggest Tcode.

We have only GL SAP document number. how to find Vendor clearing document by these GL Document number please suggest and suggest Tcode.

Hi Mahesh,
To display a document, proceed as follows:
Tcode : FBL1N (Vendor Line Item Display)
1-Select option's.
2- List
Regard's.
Cem Ates

Exact process flow for   Material management (MM) and UI Tcodes.

Hi Gurus,
Could any one tel me Exact process flow for   Material management (MM) and UI Tcodes.
ALL   BAPIs for   MM module.
Thanks in Advance.

hi,
Check the threads:
MM flow
MM-Process
For tcodes:
TCODES IN MM
TCODES IN MM
Hope it helps..
Regards
Priyanka.P

Load of materials with SXDB and LSMW

Hi everyone,
I want to know which object in SXDB and in LSMW can I use to load materials to SAP (new materials using the transaction MM01). I have done it creating a recording for a batch input, but I want to use a standard object in SXDB if there is one, or in LSMW.
Any help will be appreciated.
Regards,
Fidel

Thanks Samir,
I saw the documentation of the program RMDATIND and it says that is used for testing. that I should use for productive data the program RBMVSHOW (transaction BMV0).
Can I still use the SXDB?. The program RBMVSHOW doesn't appear in Q/A (SXDB).
Can I used the RMDATIND anyways if my productive data is below 10,000.
Regards,
Fidel

Diff between MIGO and MB01 tcode.

Dear all
Whats is the difference between cancelling GR from MIGO tcode and MB01 tcode.
Actually I got problem when GR was cancelled by using tcode MB01 (movt. type- 102). After that when i tried to cancel the part2 excise (tcode- J1IEX) i got the message "No Part I exists for availing credit in excise invoice 68150 2009". But I created the same scenario and cancelled the GR using migo then there was no problem. Still I couldn know the difference.......
With regards
Pardeep Sharma

Dear Pradeep ,
MIGO is the single T code that gives the facility to carryout various inventory management transactions .
Each an every transaction carried out in MIGO also has a separate TCODE.
In your case as per the sys the material document should be cancelled .
While doing it through MIGO u have selected the right options & cancelled the material document .
But in MB01 u have not cacelled but carried out a ggods receipt in reverse direction . If not
using MIGO , u should have used MBST instead of MB01 .
Pls try with MBST and it would work fine.
Hope it is helpful .
Regards
Anis

Do rz20 and rz21 tcodes belong to bi ?

Hi Gurus
do rz20 and rz21 tcodes belong to bi ? or they are the tcodes for BASIS. Actually I am a BI consultant and I wanted to have authorization of these tcodes. I got the answer from BASIS team that these tcodes belong to BASIS not to BI. Pl guide me
Thanks
Shivani

hi,
T-code RZ20 and RZ21 belongs to CCMS.
1) The CCMS Alert Monitor (transaction RZ20) : is the expert monitor currently available for administrators. It provides a customizable, system-wide overview of the system landscape. From RZ20, you have a guided connection to remote systems in case of an alert.
The CCMS Alert Monitor has the following advantages:
u2022 Automated, central monitoring that only requires you to carry out administration tasks when an alert occurs
u2022 Proactive monitoring by means of alerts that are triggered as soon as a particular threshold value is not reached, or is exceeded
u2022 Support when solving problems by means of pre-defined analysis functions with which you can resolve the cause of an alert in a particular component
The CCMS Alert Monitor offers the following functions:
Displays any error alerts occurring in the TMS or when exporting requests; it organizes the alerts by topic in a tree structure.
Analysis method for each alert
Option of setting alerts to completed
Alerts are visible as long as they have not been completed (completed alerts are visible in the history).
The CCMS Alert Monitor includes all systems in the current system landscape.
2) Creating the CSMREG User:
start transaction RZ21 and choose Technical Infrastructure -> Configure Central System -> Create CSMREG User.
Let me know if you need more information.
Regards,
Shiva.
Edited by: Shivu Kumar on Sep 14, 2009 7:50 AM
Edited by: Shivu Kumar on Sep 14, 2009 7:50 AM
Edited by: Shivu Kumar on Sep 14, 2009 7:51 AM
Edited by: Shivu Kumar on Sep 14, 2009 7:52 AM

Is there a major flaw with Iphoto in regards to organizing and backing up?

Is there a major flaw with Iphoto in regards to organizing and backing up? And how should I proceed??
Here is my story. I have moved roughly 15,000 photos from 7 computers (4 PCs and 3 Macs - basically everyone's computer in the family) onto one external hard drive. The photos were taken by many different digital cameras, are sparsely labeled, and have the most random names and folders. There are a LOT of duplicates. MY MISSION - label and back them up.
The way I normally deal with photos/DATA is this: I plug my camera into my Mac and immediately think about organizing and backing them up. With "Preview" I look at photos (and decide which one I like), create a folder called "where-ever I took these photos" and drag them into that folder. The problem with Iphoto is that you have no ability to control folders, unlike many other applications.
For example, in Itunes you can rename an artist, or even an album, and it will automatically appear in an updated folder. If you alter a photo in Photoshop, it makes you save it is a new file. In Iphoto you cannot make the same "root level" changes without making duplicates. From what I understand, you can place photos into an Album and then export that album (which makes duplicates). Iphoto will rename each duplicate file and then place it in the correct folder. The problem here is I have no idea where the original is to delete it.
Basically I want to create folders called "Trip to Italy 2003" or "Rachel's Wedding" and place all the photos associated with that event in those folders. The problem I run into is that I have a bunch of duplicates. I have heard of a program called Duplicate Annihilator which has gotten favorable reviews. If I import them into Iphoto all the photos are placed in random named folders. I say random because some of the photos were taken on cameras that didn't have the date set correctly. Hence some of my photos will appear in a labyrinth of folders called "Modified / 2001 / Roll 17 / DCM482 / Image25874654.jpg"
I am totally willing to wipe my Iphoto library clean and start again if there is a way to organize the photos as described above. Eventually I will take these folders and save them on a data DVD.
Thanks to anyone who can help.
Gary

You do not need to delve into the folders within the iPhoto Library via the finder to access any photo. That is all done within iPhoto itself. If you need a photo for use outside of iPhoto read Terence Devlin's treatise on file access. iPhoto is a DAM application - Digital Asset Management, not a folder manager. There's a big difference. You can use keywords, album and smart albums to organize your photos.
If you still have the original files you might consider what I do. I rename each file with the date it was taken using the international date format: YYYY-MM-DD-001.jpg. You can download the demo version ofMedia Expression and automatically rename each folder of photos with the EXIF date and a sequential number. This makes chronological searching and sorting much easier both in iPhoto and the Finder.
If you want to not only manage the photos but the folders then Expression Media will let you do both. It will let you rename files after being imported into a catalog, move them between folders, add ITPC metadata to the files, create virtual albums called Supplemental categories, and much, much more. I use it as my primary DAM and iPhoto for special projects like books, slideshows, calendars, etc.

Hi, i am having an issue with a basic motion scroll effect. I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me-, probably he didn't unde

Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki Lapan

Thank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!!

Questions regarding xft fonts, and awesome wm

Hi, I just tried ArchLinux yesterday and loving it!
I use JWM, but am very interested in dwm/awesome wm. I do have some questions:
1. On a thread in the forum, it is mentioned that dwm has no Xft support. How useful exactly is Xft? Would it impact on design work involving GIMP/Inkscape/Scribus?
2. Does awesome have Xft support?
3. I installed awesome, but I have no idea on what keys to use. The shortcuts are different from dwm. I tried to look for quick tutorial just to get the basics (dwm has one on their website), but seems like all documentation I found have none of that section and go straight to configuration.
Do I actually have to configure the wm before I can use it at a very basic level?
4. I would like to do some more comparison between wms, trying to find a good balance for me in regards of lightness and functions I need. However, I have no idea on what to use to keep track of cpu/memory usage for all the wms. What's a good way to do this?
Thank you in advance.

Welcome to Arch!
1. The lack of xft support in dwm mostly just means that you won't get anti-aliased fonts in the status bar. Individual applications will still have the same font support they had before you used dwm.
2. Awesome uses pango for font rendering, which is even better than xft.
3. Look at the man page for default key bindings. It's more or less usable out of the box, but you will definitely want to customize it somehow.
4. A good system monitor is htop. Install it from the repos and run it from a terminal.
Last edited by fflarex (2009-02-23 18:44:45)

Queries regarding Flash Builder and Augmented Reality.

I am Sarat from India. I'm a software engineer with working knowledge of Java, so Flash AS and OOP are understandable for me. I am working on an augmented reality project. I am quite new to Flash, Adobe Community and I've got some queries regarding Augmented Reality and Flash Builder:
1. Flash Builder 4.6 comes with a default Flex 4.6 SDK. However, Flex 4.6 SDK wasn't allowing me to compile and run some example files. So I've downloaded Flex 4.0A version from Adobe.com. Now the examples are running fine, but would there be any problem if i try deploying such projects in a website or as a desktop app? Once the code is compiled into a swf file, the flex framework used doesn't make much difference, does it?
2. Would the AR project run effectively on a website, given various internet/processor speeds worldwide? Would the effectiveness of the AR project, deployed on a website, depend on the number of triangles in the 3D models i.e. dae files? Because as per my understanding heavy models implies more time to download the flash app into the local browser from the internet and more time to render them by the papervision 3D engine right?
3. Can we develop a stand alone desktop AR app using Flash Builder? Using Adobe AIR we can, i guess. Please refer some tutorial, if possible.
4. I've seen that we can implement multiple-marker-tracking AR using vectors/arrays in AS. Would there be any performance issues depending on the size of the vectors/arrays used.
5. Can someone please mention some tips to improve performance of an AR app (desktop app and web app)?
6. What would be, approximately, the cost of FLARManager, FLARToolkit commercial versions, if you have any idea? I've gone through their website but they did not mention the costs.
7. Would applying bitmap material to the dae models pull down the web app/mobile app/desktop app performance, given some 4 to 5 dae models in the scene?
8. Is it advisable to use multiple markers with multiple dae models or single marker with Flash-based GUI option to load different models onto the same marker?
It would be very helpful for me if someone could answer my above queries.
Sarat.

#1, If it compiles then you have no issue. There's no reason at this point not to use 4.6. You should bundle a captive runtime to assure the users computer won't need to have AIR installed at all.
#2, Papervision is old. Use the Stage3D and/or a wrapper framework. As far as the generic "If I download lots of data will it take the user more time to load it", well, of course. Just don't make the loading experience painful. Entertain them while they way or find ways of displaying data sooner than later. If it's desirable on the web has more to do with the context of the app and the device displaying it. In other words, a phone user would find it easy but obviously not a desktop user.
#3, Definitely referring you to Google on that one.
#4, Size always matters, it's common sense. The more you process the harder it is. While I haven't done AR I've used the Microsoft Kinect SDK and ANE and tracking was extremely fast but limited. From what I've seen and your basic built in location and direction hardware on any mobile device you shouldn't have much trouble. Depends on what you're doing.
#5, This discussion would be way too large for a forum. You'd need to consult a firm experienced in AR development.
#6, "Applications using the commercial license do not have to provide source code, but must pay a licensing fee. Contact ARToolworks at [email protected] for more information." They will base your price on your product, there is no single price.
#7, The models could be huge and elaborate or tiny and simple which changes the answer. Consult the answer in #4. Ultimately most people are getting on fast networks with mobile and excessively fast on desktop/wifi. Size matters a lot less than 3 years ago.
#8, Depends on what you're doing. You have to explain it.

Regarding case statement and decode function

Hi Experts,
I have question.....regarding case statement and decode statement....
Can you please explain me that which one will be efficient,to place in insert statement...
insert statement(
(case when ........then
                     case when ....then
                     else
                     end)
else
end)
or
insert statement(
case when.....then
decode(....)
else
end)
Can you people explain me which one is more efficient method?
Thanks in advance.......

The are major differences to talk about in case of CASE vs DECODE, but performance wise both are pretty much the same.
Have a look at Tom's thread
Ask Tom &quot;better performance - case or decode&quot;
I would suggest to use CASE whenever possible. Don't worry about the performance part.

Quick question regarding best practice and dedicating NIC's for traffic seperation.

Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc

Question regarding the "mcxquery" and "dscl -mcxread" commands:

Question regarding the mcxquery and dscl -mcxread commands:
Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
-D
Message was edited by: Daniel Stranathan
null

How do you "call procedures/functions" without sql code? You need at least the call statement like
{call myProc(?,?,?)}that you wrap into a CallableStatement.
Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
con.setAutocommit(false);
try {
   con.commit();
} catch (Exception e) {
   con.rollback();
} finally {
    con.setAutocommit(true); //or:
    con.close();
}

Wher's the error? BPPF-BLART IN TD_PROTOCOLLO AND SYST-TCODE NOT IN Z_ECCEZ

Hi All,
cuold anyone tell me wher's the error in this code I've used in validation rules of FI?
BPPF-BLART IN TD_PROTOCOLLO AND SYST-TCODE NOT IN Z_ECCEZIONE
Thanks

Hi All,
cuold anyone tell me wher's the error in this code I've used in validation rules of FI?
BPPF-BLART IN TD_PROTOCOLLO AND SYST-TCODE NOT IN Z_ECCEZIONE
Thanks

Regarding BDLR, SXDB and BMVO Tcodes

Similar Messages

Maybe you are looking for