Regarding best obiee institue in hyderabad

Hi Friends,
Good evening i hope all are doing good
I need small info iam new in OBIEE iam planning to learn this course in hyderabad can u please tell me best institue in hyderabad.Iam looking for class room training not online training.Please help ASAP.
Thanks,
Ramesh

For free online Apps Step by Step technical training check
http://becomeappsdba.blogspot.com

Similar Messages

Quick question regarding best practice and dedicating NIC's for traffic seperation.

Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc

Require information regarding apps dba training in hyderabad

hi all,
i am jr dba and i would like to learn apps dba and i would like to know best institute offering apps dba at hyderabad including details i know wilshire which offers apps dba but started recently but talk is not good so any other training centers which offer reply to this immediately with deatails of the institue if any one has pursued or know abt the institute .
thanks
vamsi

For free online Apps Step by Step technical training check
http://becomeappsdba.blogspot.com

Infomation regarding Best Practices Required,

Dear Friends,
Happy New Year......
Im working as a part BI Excellence team in a reputed company.
I jst want to say a client to install the BI Best Practice(Scenario - SCM), inorder to do that i need to present him the advantages and difference between Best practice (SPECIFIC FOR BI) over General Implementation.
When i search in Help.sap.com, it generally speaks about the time consumption n guidelines of Overall SAP Best Practices.
Can anyone help me wrt to BI (From Blue Print to Go Live), Time line diferrences between SAP BI Best Practice and General Implementation.
An Example with Specific Scenario Like SCM, Taking a Cube for IM and describing the Start to End Implemenation process and its timeline. How the same differs, when we go by using a SAP BI Best Practice installation?
Please provide your Valuable suggesstions, as i dont hav any Implementation experience.
Requesting your Valuable Guidence.
Regards
Santhosh kumar.N

Hi,
http://help.sap.com/saphelp_nw2004s/helpdata/en/f6/7a0c3c40787431e10000000a114084/frameset.htm
http://help.sap.com/bp_biv370/html/Bw.htm
Hope it helps........
Thanks & Regards,
SD

Question regarding best practice

Hello Experts,
What is the best way to deploy NWGW?
We recently architected a solution to install the 7.4 ABAP stack which comes with Gateway. We chose the Central Gateway HUB scenario in a 3 -tier setup. Is this all that's required in order to connect this hub gateway to the business systems ie ECC? Or do we have to also install the gateway add-on on our business system in order to expose the development objects to the HUB? I'm very interested in understanding how others are doing this and what has been the best way according to your own experiences. I thought creating a trusted connection between the gateway hub and the business system would suffice to expose the development objects from the business system to the hub in order to create the gateway services in the hub out of them? Is this a correct assumption? Happy to receive any feedback, suggestion and thoughts.
Kind regards,
Kunal.

Hi Kunal,
My understanding is that in the HUB scenario you still need to install an addon in to the backend system (IW_BEP). If your backend system is already a 7.40 system then I believe that addon (or equivalent) should already be there.
I highly recommend you take a look at SAP Gateway deployment options in a nutshell by Andre Fischer
Hth,
Simon

PC issues - need advise regarding best option...

Hi there,
I'm in a bit of a mess and would like advise on the best way to handle it.
My PC has just died (WindowsXP - power supply issue on an old model). My iTunes library is stored on an external harddrive, so there should be no data loss. I haven't sync'd my iPod since this has happened.
I am planning on getting a PC/MAC in the near future, to replace the above PC, however in the meantime I am using another laptop (Windows 7) - it's not mine & I'm hoping to get my own hardware in the next month or two.
I've also just purchased an iPhone & activated it using the laptop. (Laptop owner does not have any iPod/iPhone at present, but will probably be getting an iPhone soon. This iTunes has no music/contents etc.
Can the iPhone & iPod both use the same iTunes library? (I believe they can)
Should I sync my iPod on the laptop? or wait until I get my new hardware and transfer everything across to that PC?
Thanks in advance for any help with this.
Regards,
Vic

+My iTunes library is stored on an external harddrive, so there should be no data loss.+
Do you really mean just the itunes library, or do you mean the itunes library plus the itunes content?
This iLounge article is the best I've seen at explaining how to move to a new PC....the WHY of it all, which isn't in any of the Apple articles.
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/
+Can the iPhone & iPod both use the same iTunes library? (I believe they can)+
Yes, you can use as many ipods on one PC as you want.
+Should I sync my iPod on the laptop? or wait until I get my new hardware and transfer everything across to that PC?+
Sure, if you've moved everything to the laptop correctly as per the iLounge article, go ahead.

Regarding Best Practices Documents

Hi All,
How to search and download SAP Best Practices documents.
Thanks in Advance
Pavan

Hi Pavan,
Pl go to the URL: http://help.sap.com/
On the top centre of the page, you find SAP Best Practise tab.
In there, you have Overview, Baseline packages, Industry packages, Cross-industry packages.
Click on the desired option and you get to download the BEST PRACTICES.
Given below is the Best practice URL for industry package for Automotive: Dealer business managament:
http://help.sap.com/bp_dbmv1600/DBM_DE/html/index.htm
(This is for your reference only).
Hope this helps!
Regards,
Shilpa

Help regarding best option to meet new requirement

Hi guys
I need your help to find the best solution for my requirement.
I need to transfer the value of two Items to a third one without changing the source.
For example I have:
Item 1: 200u20AC
Item 2: 300u20AC
I have to transfer the 500u20AC to Item 3, but I want the values to remain unchanged in Account 1 and 2.
Iu2019m almost being able to do this with Reclassification functions, but these functions remove the original values.
Do you know how can I do this?
Best regards

Hi,
Use One-Sided Reclassification:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/91/4b721354f68b45987210d89e9d30b3/frameset.htm

New to ColdFusion - Question regarding best practice

Hello there.
I have been programming in Java/C#/PHP for the past two years or so, and as of late have really taken a liking to ColdFusion.
The question that I have is around the actual seperation of code and if there are any best practices that are preached using this language. While I was learning Java, I was taught that it's best to have several layers in your code; example: Front end (JSPs or ASP) -> Business Objects -> Daos -> Database. All of the code that I have written using these three languages have followed this simple structure, for the most part.
As I dive deeper into ColdFusion, most of the examples that I have seen from vetrans of this language don't really incorporate much seperation. And I'm not referring to the simple "here's what this function does" type of examples online where most of the code is written in one file. I've been able to see projects that have been created with this language.
I work with a couple developers who have been writing in ColdFusion for a few years and posed this question to them as well. Their response was something to the affect of, "I'm not sure if there are any best practices for this, but it doesn't really seem like there's much of an issue making calls like this".
I have searched online for any type of best practices or discussions around this and haven't seen much of anything.
I do still consider myself somewhat of a noobling when it comes to programming, but matters of best practice are important to me for any language that I learn more about.
Thanks for the help.

Frameworks for Web Applications can require alot of overhead, more than you might normally need programming ColdFusion, I have worked with Frameworks, including Fusebox, what I discovered is when handing a project over to a different developer, it took them over a month before they were able to fully understand the Fusebox framework and then program it comfortably. I decided to not use Fusebox on other projects for this reason.
For maintainability sometimes its better to not use a framework, while there are a number of ColdFusion developers, those that know the Fusebox framework are in the minority. When using a framework, you always have to consider the amount of time to learn it and succesfuly implement it. Alot of it depends on how much of your code you want to reuse. One thing you have to consider, is if you need to make a change to the web application, how many files will you have to modify? Sometimes its more files with a framework than if you just write code without a framework.
While working on a website for Electronic Component sourcing, I encountered this dynamic several times.
Michael G. Workman
[email protected]
http://www.usbid.com
http://ic.locate-ic.com

Advice needed regarding best practice

Hi - curious as to if what i have setup now should be changed to best utilize Time Machine. I have iMac with 750GB drive (a small chunk is partitioned for Vista) - lets assume I have 600 GB dedicated for the mac.
I havetwo firewire external drives - a 160GB and a 300GB.
Currently, I have my itunes library on the 300GB drive as well as a few FCE files. I have made the 160GB the Time Machine drive. Would I be better off moving my iTunes library to the internal HD and then using the 300GB drive as the Time Machine drive? As I have it now, I don't think my iTunes library is getting backed up. In an ideal situation, is it safe to assume your Time MAchine disk should be at leasta s large if not larger than the internal HD? Thanks.
Steve

Steve,
I would recommend using a drive that is 2x the size of the files you are going to back up. This is specifcally in the event that you make changes to the files and Time Machine starts backing up the new files that you have created. It will back up once every hour and it will only make a back-up copy of files that you have modified. If you are backing up your home folder, and you are using FCE, I would say back up to the 160Gb drive would be sufficient. If you were planning on backing up your home folder & your iTunes library, I would recommend the 300Gb drive. The only reason that you would need a backup drive 2x the size of your HD is if you were backing up your entire drive.

Regarding best practise

Hi ,
Is it best practise to do all filed validation using java...or could field validation be done using java beans in JSP ?
Thanks
Vivek

2. There's nothing wrong with what you have there,
this is a custom tag library.Yes, for small applications, that would suffice. Remember that you are going away from an MVC model while using jstl sql tags.
Consider having a dao layer if your app is medium/big or destined to grow with time.
You simply cannot maintain all the complexities in your application (and by extrapolation, your queries) - read
1. http://www.onjava.com/pub/a/onjava/2002/03/13/jsp.html?page=2
2. http://today.java.net/pub/a/today/2003/11/27/jstl2.html
There's some good points for and against here
1. http://weblogs.java.net/blog/johnm/archive/2003/11/the_community_i.html
There's some support here
1. http://acroyear.blog-city.com/a_reasonable_reason_for_the_sql_tags.htm
2. file:///C:/Documents%20and%20Settings/ramprasadmr/Local%20Settings/Temporary%20Internet%20Files/Content.IE5/WL2JCD6Z/300,42,SQL tags: the debate
cheers,
ram.

Regarding Best approach

Hi ,
We have a fact table in which 34 merge where there with 34 different dimensional table to update the 34 different facts.So we are hitting the fact table 34 times with 34 different dimesional table.So What is the best approach to hit once and update the 34 facts in single hit.Kindly give your suggestions/best approach..

We have a fact table in which 34 merge where there with 34 different dimensional table to update the 34 different facts.Are you talking about 34 fact tables, or
So we are hitting the fact table 34 times with 34 different dimesional table.A single FACT table getting updated 34 times?
So What is the best approach to hit once and update the 34 facts in single hit.Kindly give your suggestions/best approach..First question is why are you updating?
Why cant you fill the keys during INSERT ?
The normal/best practice is to populate the keys during INSERT. Do an outer join on all the dimensions when you select data from the source to find out the keys..

SQL,PL/SQL Training Centres in Hyderabad

Hi,
Iam looking for SQL,PL/SQL institues in Hyderabad.Can anyone suggest me the best institute.
Regards,
Manju

Hi:
U can get training from below mentioned places. It is Near Polaris, Begumpet.
SQL Star International Limited
4, 1st Floor, Motila Nehru Nagar, Begumpet
Hyderabad
Andhra Pradesh - 500016
India
Tel : 04027763125 9885199529
Fax : 04027761921
SQL Star International Limited
504, Maitrivanam, HUDA Complex,
Software Technology Park, Ameerpet,
Hyderabad-500 038.
Ph 91-040-296313 / 3743583
Fax 294687 E-mail :[email protected]
cheers,
Manish

Good SAP CRM &MDM Training in Hyderabad,India

Hi,
Is anyone please help me to find out good sap crm & mdm training institues in Hyderabad India.
Thanks
PV

Hi,
If i were you for the best CRM training,even though its costly i would prefer Seimens,otherwise SAP Academy in Bangalore,they are pretty costly but still worth.
Let me know if more info required
thanks,
kalyan

What is the best way to import and edit a large amount of footage?

Hello Apple world,
As a newbie to Final Cut 10 I have a question regarding best ways to import footage. I'll give you a quick run down.
I have a 150 gig of gopro footage that I just hit 'import' to recently (from my external HD), it took around 10 hours to process it all.
Its all under one event, but then somewhat organised into dates etc. But it is very slow. I imported it all at once because it was all footage from the last 6 months of my Whistler/states/fiji trip and want to make a movie out of it, using clips from all over the time, not just in chronological order.
I have the latest mac book pro, 4 gig ram,2.4 GHz i7, 750 hard drive, with nothing else on the computer.
Ive read about creating proxy media, after ive imported, but am still somewhat confused as to the benefit. Does it create duplicates? that will fill up my pretty large HD as it is!
Can you suggest any ways that might make my laptop run a bit faster? Should i delete and work directly from external HD etc etc?
Any suggestions will be greatly appreciated!
Thanks in advance
Harlee

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

Regarding best obiee institue in hyderabad

Similar Messages

Maybe you are looking for