Regarding Bex Query

Hi All
There is an issue....when i am trying to run my query in Bex Analyzer then its giving some error regarding Read Mode... and asking to go to Query Monitor (transaction RSRT1) here i am finding these two errors...
Invalid read mode
Error when generating dataProvider
Any suggestion would be highly helpful.
Thank you .
Regards
Shivanjali

OSS note: 432596
Summary
Symptom
Invalid read mode. For repair: RSRT (OK code =RMRP)
Additional key words
Cause and prerequisites
Longtext of this message:
A number of querues often have by mistake the read mode "Read all at once". In many cases, this causes performance problems. To avoid this type of error, the above warning message appears when you execute a query that has been generated with this read mode.
Solution
Change the read mode before you execute the query: You can change the read mode of a specific query using transaction RSRT. Choose Query -> Read mode to set the read mode for a selected query. If this warning message is displayed when you call up a query, you have to change the default read mode for new InfoCube queries in Customizing for BW (Tools > Business Engineer > BW Customizing > SAP Reference IMG ). The default read mode is under the node "BW Customizing Implmentation Guide > Business Information Warehouse > Reporting-Relevant Settings > Set Read Mode for InfoCube
You can also change the read mode for all queries and the default read mode for all InfoCubes using transaction RSRT. Choose Environment -> Repair read mode. This is where you can change all non-allowed read modi to "Subsequenlty read by navigation".
cheers
Sunil

Similar Messages

Regarding Bex query option

Hi Friends,
I am working in one poc project in that i want to enable the query(Bex Analyzer 7.0 in outlook 2007) for third party vendor.
Where user can develop the BO WEBI Query on this Bex Query.
Please tell me the option i have to check.
Please help me out.
Thanks & Regards,
Ramnaresh.p
Edited by: ramnaresh porana on Jun 23, 2009 7:10 AM

Hope you can check the option of Use external access to the query in the Query Properties
Regards

Authorization issue regarding Bex Query

Hi All,
User Requirement: When ever the user is executing the report in Design Studio, user can able to see all the company codes (summary data) in the main page of the dashboard. If user wants to drill down to a particular Comp code, then user should access only which are authorized. Ex: If the user Test4444 is executing the report, then he/she can able to see all the comp codes data in the main page of the dashboard. If the user wants to drill down further to see the comp code wise data, then he/she should not allowed to see except comp code-4444 or what and all authorized .
Back ground work:
I have a Bex query, which is using the Design Studio. In this query, "0COMP_CODE" is a char InfoObj and I have created a Auth variable on this InfoObj. There are 4 autho objects created based on this "0COMP_CODE". And also 4 Roles and 4 users have created.
Each autho_Objet has assigned to that corresponding Role and that Role is assigned to that correspond User. Details are as follows.
Autho_Objet
Role
UserID
ZTEST_MAIN (which includes all - 23 compny codes)
ZMain_Role
All users have to access this role
ZTEST_1111 (which includes only CC- 1111
Z1111_Role
Test1111
ZTEST_2222 (Which Includes only CC - 2222)
Z2222_Role
Test2222
ZTEST_3333 (Which Includes only CC - 3333)
Z3333_Role
Test3333
ZTEST_4444 (Which Includes only CC - 4444)
Z4444_Role
Test4444
To achieve this requirement, I have created 1 auth.object for all Comp.Codes and assigned to one main role and this role is assigned to all users. This looks fine and hopefully it will work.
The problem is the next step of drill down to comp.code. Here I have created individual autho.object per Role per User and mapped accordingly. Unfortunately, user can able to access all the comp.codes data because of the main role assigned. I got stuck here in this second level restriction. Could some one can through a light how we can achieve this in authorization. It would be a great assistance if some one help here. I would be much appreciated and grateful to your assistance and inputs. Thank you in advance!
BR
Venkat...

In the role ZTEST_MAIN,
You need to remove all company codes as this is overriding the rest
Then add aggregate authorization, ie "0COMP_CODE" = ":"
This is a special authorization which grants authorization to see the summation of all the 0COMP_CODE without giving detailed authorization to any.
The rest of your design is fine.
You should then use RSECADMIN to check any authorization issue you have.

Bex query hep

Hi ,
I need some help regarding bex query
I have 3 key figures say A,B,C allocation check characterstic
I want to display in report output in following manner
If allocation check = 'OFF' then
MINIMUM of A and B
END IF
IF allocation check = 'ON' then
Minumum of A,B,C
pleasecan anybody help me how to solve this issue

Hi,
There is some workaround to get this:
I assume that Your KeyFigure will have value for either ON or OFF not for both.
1.Create 2 RKFs restricted by OFF and ON.(RKF1-restricted by OFF ,RKF2-restricted by ON)
2.Create 2 new formulas F1 = Count (RKF1) and F2 = Count(RKf2)
f1 returns 1 if rKf1 is <>0 , otherwise 0
3.Create a New formula f3 = ( (f1==1)( (A<B)A ) )+ ( f2 == 1 ) ( ((A<B)(A<c)A) + ((B<A)(B<c)B) + ((c<B)(c<A)c) )
you may hide RKF1,RKF2,f1,and F2 if you dont want to display.
Hope this helps.

Regarding Filter in Webi Report which is based on BEx query

Hi,
I am developing Webi report, in which using universe which is baed on BEx query.
Suppose BEx query contains filter on fiscal year 2010.
And I am developing Webi report on that query. So I want to know, whether my Web i report output will contain data of only fiscal year 2010, as filter is applied in BEx query.
Thanks,
Pradip Nikam

Hi,
if this is a fixed filter the data will be filtered.
if this is a variable in the BW query the user will get prompted.
ingo

How can we remove the commas from the Formula value in SAP BW BEx query

Hi All,
How can we remove the commas from the Formula value in SAP BW BEx query
We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
Regards
Venkat.

Do you want to remove the commas when you run the query on Bex Web or in RSRT?
Regards

Status of data in Bex query shows wrong date

Dear Experts,
The Bex qurey after sucessful execution, show the Status of data as old date i.e. feb 2012. but we observed that the data uplaod happens regularly and sucessful.
we tried executing the same query using RSRT/Bex Analyzer/Portal. the results are same i.e. showing incorrect status of data.
Note: The Bex query is built on BI Infoset which sources from DSOs and Master Data infoobjects, and BI version is 7.0.
Kindly please help for resolving the issue.
Best Regards,
Mannu.

Hi Vijay,
The data upload has happend today also and it is sucessful, the reporing status is available for requests from respective infoproviders.
'Status of data' is not a filed. if it an information to tell the status of data in query result.
Please find the following steps to find the 'status of data'
go to RSRT->give the query name and execute-> now after query results-> go to last page-> you can find the 'status of data'.
Best Regards,
Mannu

Message in BEx Query Designer Formula

Hi Experts,
I need to display message based on the value of the formula result. For Example:
If K.F1 =<2.5 Then <Message: ODD>
ElseIF K.F1 >2.5 Then <Message: Even>
Else
<Message: Determine the value>
EndIF
Thease above messages would be build in the formula column of BEx query designer
Thanks and really appreciate your response.
Regards,
Waseem

Hello,
I have done the same funtionality with the help of workbook.
May be experts can guide us how to display messages in the formula column of BEx query designer.
Thanks.
With regards,
Anand Kumar

Drilldown in BeX Query Designer

Hello,
I am new in SAP. I am having problem creating Drill down. I have this report where all the data is Transactional data. So I haven't created any Master Data. So I won't be able to use Navigational Attribute for Drill down purpose and I don't want to use Hierarchy. Is there any possibility of getting the Drill down in BeX Query Designer? Any help will be appreciated.
Warm Regards,
Debayan

Hi Debayan,
first of all, what is your requirement to create a drill down?
A drill down in BEx query means showing additional information from report output. There are 3 ways to drill down a query in BEx
1. Master data-Navigational Attributes
2. Master data- Hierarchies
3. Free characteristics
As you dont have any master data in the report (which is very strange) you can use the additional characteristics provided in the 'Free characteristics' to see how the drill down works in BEx.
Please share your exact requirement.
Hope this helps.
-Swati.

Results based on From and To value in Bex query designer.

Dear all,
We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
How to get my requirement achieved in the Bex query designer.
Experts suggestion with steps will be very useful to solve my problem.
Regards,
M.M
Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

Hi Magesh,
I think you could try one more way.
Create a formula inserting your two formula variables for limits .(FV - are ready for input ) .
The formula would return the result as 1 or 0 because it would have boolean condition in it.
You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
You formula A would look like
( KF > FV1) AND (KF < FV2) * 1.
And in the condition put A EQ 1.
You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
Regards,
Sunmit.

Difference between aggregation and calculation tab in BEx Query Designer

HI,
I am using BEx Query Designer for my report, for the key figures in the coloumn area i slected one numeric key figures, in the properties tab i found aggregation tab and calculation tab.
I need to sum up the total values for that particualar coloumn, when i used calculation tab i found to sum all the values for a particular coloumn, then what is the use the aggreagation tab?
I not able to used that Aggregation tab it is showing as a hidden fields...
can any one tell me whats the exact difference between these tabs and when we need to use which tab?
With Regards,
Thanesh Kumar.

Hi Thanesh Kumar,
I moved this thread from forum Data Warehousing to Business Explorer since it is a query related question (as SDN moderator).
I could explain to you the difference between these two tabs.
For "calculation" tab, it changes the display of result and does not change the calculation logic.
It means that, if this key figure is used further in formula, still the original number (without "calculation" tab setting) is used for further formula calculation.
For "aggregation" tab, it changes the real calculation logic.
The system takes the setting as the aggregation rule for records.
The most common aggregation rule is of course summation. If you set to e.g. Average here, the system does the
Average instead of summation when aggregating records. And the Average value will be taken for calculation
in further formulas or other calculations.
For "aggregation" tab, you could only use it for CKF (calculated key figure) or formula and you could not use it for
a basic key figure. That should be the reason why you see it greyed-out.
Regards,
Patricia

Usage of formulas in conditions in BEx Query Designer

Hi guys,
does anybody of you guys know, if it's possible to use the results of formulas in conditions? I tried it, but the result of the query was "No applicable data found", but there are data for the selection.
When I'm defining the condition with the key figure (no restricted or calculated key figure), then the query can be executed.
In my case, I like to define a condition based on a formula result. The value should only be displayed, when the result is greater than 30.
Any ideas or are there any bugy in the BEx Query Designer?
Thanks a lot + best regards,
Clemens

Hi Clemens,
I have created a condition in my own system based on formula and it works perfectly fine. Please check following points in your condition change mode,
1) Condition is marked as Active.
2) In the block "Evaluate condition below for" you will have to select "All characteristics in drilldown Independently". If you have selected combination of characteristics then you will have to maintain proper sequence otherwise your condition will not work.
3) In the next block when you set the condition, click on new, in the first block select your Formula from dropdown and set the proper operator in your case you will have to select "Greater than" in the next column set the value of key figure and just trasnfer it.
Now you are ready to use the condition.
Regards,
Durgesh.

Problem with Queries Structures in Bex Query Designer and Universe Designer

Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
                      - (Characteristic Restrictions) Reg Guayana
>          (InfoObject)     0Product = 'XXX'
>          (InfoObject)     0Country = 'YYY'
     - (Characteristic Restrictions) Reg Caracas
>          (InfoObject)     0Product = 'AAA'
>          (InfoObject)     0Country = 'BBB'
Rows
(Structure) ZSRT_456
               (Key Figure)     Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure)      Net Sale
(Class)     ZSRT_123
>(Dimension)      ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.

Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier

In Bex Query designer - Flat is not supported

Hi all,
In Bex query designer,
While execution of the query, the following error is coming .
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Flat mode is not supported!
java.lang.UnsupportedOperationException: Flat mode is not supported!
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.setHierarchy(Characteristic.java:330)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.readStateFromDomNode(Characteristic.java:542)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvCharacteristic.readStateFromDomNode(QvCharacteristic.java:379)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvStructure.readStateFromDomNode(QvStructure.java:106)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.AttributeContainer.readStateFromDom(AttributeContainer.java:297)
Details: Full Exception Chain
Most important error.
regards
Selvan

Hello,
I have the same problem with Flat mode is not supported! at ... Characteristic.setHierarchy(Characteristic.java:335):
Open, close, reload of the query does not help.
Other SDN-thread "500 Internal Sever - Flat Mode is not Supported!" related to transaction RSRT.
Execution of query via RSRT works, but the problem still persists in the BEx Web Analyzer.
Could be related to a BEx Web Analyzer "bookmark" ("Personalize Web Application").
I have not deleted any item. We use SAP BW 7.0 with a patch level approx. 09.2009.
The "flat-mode" seems to be the "BEx table mode".
SAP hints do not seem to fit here:
- 715820 BW 3.x Front-End Patch 14 (we use BW 7.0)
- 874825 SAPBWNews for BW 3.x Front-End Support Package 19
- 874827 SAPBWNews for BW 3.5 Front-End Patch 08 (we use BW 7.0)
- 905229 update to SAPTableTree
- 909824 Termination in flat mode when an object is deleted (old?)
- 909827 Incorrect InfoProvider-dependent characteristic values
- 910602 Condition includes too many characteristics (usage of deleted elements)
- 915215 Termination when a query definition is changed (old? visibility of elements?)
- 968273 Cache with flat files: Exception is not caught (does not apply to given error)
Any new solutions?
Best regards
Thomas

IF ELSE Statement in BEx Query based on the results

Hi experts,
I want to realize the following IF/ELSE statement in a BEx Query in respect to the result values
If the result of KF1 equals 0, than set the KF2 to 0, Else (KF1 NE 0) show the value of KF2
Background: I want to report the order backlog. In the example above we have an incoming order value of 23.700,80 EUR in periode 12.2013 and an turnover of 22.370,80 EUR in periode 01.2014. The order backlog in ST (KF1) is 1 ST (12.2013) - 1 ST (01.2014) = 0 ST. The order backlog in EUR (KF2) is 23.700,80 EUR (12.2013) - 22.370,80 EUR (01.2014) = 1.330 EUR. The Order and Invoice is finished, but we have an positive order backlog in EUR (reason: less turnover as incoming order).
For this case I want to realize the IF/Else statement to check if the oder backlog in ST = 0, if yes, than set the order backlog in EUR also to 0.
Any best practices?
Many thanks and best regards,
Michael

Hi Suman,
thanks aigain for your reply!
I have tried your proposal before you have posted it.
In my special case the following if/else statement works successfully:
CKF = calculated key figure
Formula1 = (CKF1 == 0) * 0 + (CKF1 <> 0) * CKF2
In my case the CKF2 is the result value from "Incoming Order value" - "Turnover"
So I had to define a separate Formula (1:1 equals to CKF2) and then I was able to set "*CKF2" in the statement.
The statement CKF2 = (CKF1 == 0) * 0 + CKF2 is not possible (because it´s not possible to calculate from CKF2 itself).
Now it works
Best regards,
Michael

Regarding Bex Query

Similar Messages

Maybe you are looking for